IWeb and SimpleViewer Pro gallery issues

Hello all!
I have a simple viewer gallery (http://simpleviewer.net/simpleviewer/) and I tried to upload the gallery on a page of my iweb site through IFRAME with this code:
<IFRAME SRC = "MY LINK" WIDTH="260px" HEIGHT="425px" FRAMEBORDER="0" --if "0" no border, otherwise "1" with border MARGINWIDTH ="0px" MARGINHEIGHT="0px" SCROLLING="no" --"no" no scrolling bar, "yes" show always, "auto" showed when need > Your browser does not support IFRAME </IFRAME>
the result is that iWeb crashes even before saving the html snippet, so I have to restart everything and nothing changes. So as soon as i paste the code in the html snippet iWeb stops responding.
Any help please?
Thank you,
Ilenia

Try the following:
1 - close iWeb.
2 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
3 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
4 - reboot.
5 - launch iWeb and see if there's any improvement.
If that doesn't help continue:
6 - move the domain file from your User/Library/Application Support/iWeb folder to the Desktop.
7 - launch iWeb, create a new test site and save.
8 - go to the your User/Library/Application Support/iWeb folder and delete the new domain file.
9 - move your original domain file from the Desktop to the iWeb folder.
10 - launch iWeb and try again.
OT

Similar Messages

  • On-premise SharePoint 2013 and SkyDrive Pro Sync Issue

    Hi all,
    I'm not sure if this is the correct forum between SharePoint and SkyDrive as the issue is related to an update on SkyDrive Pro.
    premise SharePoint 2013 installation (migrated from 2010) and Office 2013 installed. SharePoint is patched up to the latest CU. Syncing documents from SharePoint worked fine until KB2817495 was installed. The syncing still seems to work but we cannot add
    any new libraries, either directly from the browser using the "sync" button or adding the URL to "Sync a new library". I've tested it with an Office 365 account and the libraries add fine so I'm not sure whether it's a SkyDrive or SharePoint
    issue. If I uninstall the update then I can successfully sync new libraries from our on-premise installation.
    At this point the only solution I can see is to prevent that update from installing via WSUS.
    Kind regards,
    Rick

    Hi
    anuxps ,
    Yammer already have Single Sign On with Office 365, but SharePoint Server for on-premise does not follow a 90-day release cycle and it won’t yet. Also we are looking for Yammer integration with on-premise
     soon. There are improvements coming.
    Reference:
    http://social.technet.microsoft.com/Forums/en-US/a6ecdee4-ac28-4989-929b-0e6c9968732e/yammer-sharepoint-onprem-integration?forum=sharepointgeneral
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Eric Tao
    TechNet Community Support

  • IWeb and Mobile Me gallery?

    I am using iWeb to create my web site but publishing my photos from iPhoto to the mobile me gallery. In iWeb I am using the Black theme where it puts the main links to the different pages across the top. I would like to add a link there that goes to the gallery.me.com page. how do I do this??
    Thanks for the help.

    iWeb: you don't need to save anything from the iDisk - iWeb does not open html files. Your iWeb sites are held in (user)/Library/Application Support/iWeb in a file called Domain. So even after MobileMe terminates you will still be able to open iWeb and see your sites, you just won't be able to publish them to MobileMe. You can publish them to any other webspace - please see this page:
    http://rfwilmut.net/migrate2
    Gallery: if your albums arre synced with iPhoto or Aperture then the pictures are on your Mac anyway. If not, and you don't have local copies (which is always a risky procedure) you will have to download each picture separately. Alternatively there is an online photo gallery service called ZangZing which provides an easy import facility from various other services including MobileMe's Gallery. It's free until June 2012 after which the first 2GB is free with escalating price levels starting at $5 per month or $50 a year.

  • IWeb and Simpleviewer

    I'm trying to figure out how to implement Simpleviewer into an iWeb-created site hosted on a server other than .Mac. Would I just create a link to a page that would include a Simpleviewer gallery (ie, I would create a seperate HTML page that would run the Simpleviewer script and host them in a different folder from my iWeb folder?). Or is there a way to have the Simpleviewer run within a page created by iWeb (like a slideshow)?
    Or maybe I'm way off on both?
    15 inch Aluminum PowerBook G4   Mac OS X (10.4.5)  

    Hi James,
    Sorry to resurrect this thread, I am having a hard time with postcardviewer. It is the new 1.1 version.
    Everytime i publish, using my sisters idisk, i end up with some of the photos missing and being replaced by white squares representing 404 errors.
    This happens even when publishing the default postcardviewer folder downloaded from airtightinteractive.
    see.
    http://homepages.mac.com/htimsetak/Sites/postcardviewer
    I see you have published some photos on .mac using postcardviewer 1.0 which work perfectly.
    1. did you do anything to the photos first
    2. what method did you use create galleries. i.e. manually editing the images folder or using a generator?
    Cheers in advance
    Alistair
    p.s. i will post this as a new thread as well on the .mac discussions page.

  • WRT310N v1 and MacBook Pro wireless issues

    Hi all,
    I've been having ongoing wireless issues with my WRT310N v1. I have a macbook pro (early 2009) with mac os 10.5.8. I have cable internet, with a DHCP connection. I have a computer and PS3 hardwired through the router, and they work flawlessly. The wireless, however, has never been what it should be. Internet loads slow, even though the connection speed is pretty good (not as fast as hardwired devices, but close).
    Here are the wireless settings:
    wireless config: manual
    network mode: mixed (the Macbook can get wireless-n, by iPhone is only g)
    Radio band: standard 20 mhZ
    wide channel: 9 (can't change this with this config, unless i go wide channel at 40 mhZ)
    standard channel: 11
    SSID broadcast: enabled
    I've got WPA2 security, with AES encryption. I've set the Beacon interval to 75, and left the Fragmentation and RTS thresholds at default. The firewall is activated, and "filter anonymous internet requests" is disabled.I'm wondering if I'm losing so much speed by broadcasting a mixed signal, instead of just G or just N. I've tried transmitting only in Wireless-N, but there's no noticeable change (and the iPhone can't connect at all). 
    Any input at all would be really appreciated. I'm hoping I don't have to fork over $30 to linksys just to get tech support. Thanks in advance.
    Solved!
    Go to Solution.

    Well its not necessary to power cycle your router everytime whenever you make any changes on your Router. But if you re-configure all the settings on your from scratch, then its better to power cycle your router.

  • 2013 Mac Pro, 10.9.3/4 and Premiere Pro - GPU Issues

    Hello All
    Since the introduction of Mavericks 10.9.3 and subsequently in 10.9.4, Apple Mac Pro (Late 2013 model) users have been affected with issues relating to video editing applications such as Adobe Premiere Pro CC and Da Vinci Resolve.  It appears that since these updates the compatibility with the AMD D500 or D700 GPUs is broken and causing significant workflow problems.
    Some of these problems include (particularly that I have experienced):
    White lines appearing on the video in the program window during playback and encoding
    Green and Pink lines appearing as mentioned above
    Other odd image artefacts during playback
    Poor performance when playing any clips with GPU accelerated effects or parameters
    Struggling to playback footage at full resolution (not 4K just HD material which shouldn't be a problem)
    Freezing and crashing of the application
    Slow loading of media and saving of projects
    Consequently, this is significantly affecting my workflow and I know I am not the only video editor suffering these issues.  I have spoken to Adobe who are aware of the issue and say they are working with their partners to find a resolution.  I assume and hope that one of those partners is yourselves and implore you to please elevate this issue to a more serious status as it really is becoming highly frustrating and starting to effect my business.
    I'd be interested to hear from other users that are experiencing these issues and hopefully together encourage Apple and Adobe to get their heads together and fix what is broken and fix it ASAP.  It isn't good enough that for a machine this pricey we are left out on a limb without an urgent fix being presented.
    I hope we see a fix for this soon but failing that please make 10.9.2 available so we can at least roll back and become productive again.
    Kind Regards
    Alex
    Owner and Principal Cinematographer
    Camera On Films

    Hello All
    Since the introduction of Mavericks 10.9.3 and subsequently in 10.9.4, Apple Mac Pro (Late 2013 model) users have been affected with issues relating to video editing applications such as Adobe Premiere Pro CC and Da Vinci Resolve.  It appears that since these updates the compatibility with the AMD D500 or D700 GPUs is broken and causing significant workflow problems.
    Some of these problems include (particularly that I have experienced):
    White lines appearing on the video in the program window during playback and encoding
    Green and Pink lines appearing as mentioned above
    Other odd image artefacts during playback
    Poor performance when playing any clips with GPU accelerated effects or parameters
    Struggling to playback footage at full resolution (not 4K just HD material which shouldn't be a problem)
    Freezing and crashing of the application
    Slow loading of media and saving of projects
    Consequently, this is significantly affecting my workflow and I know I am not the only video editor suffering these issues.  I have spoken to Adobe who are aware of the issue and say they are working with their partners to find a resolution.  I assume and hope that one of those partners is yourselves and implore you to please elevate this issue to a more serious status as it really is becoming highly frustrating and starting to effect my business.
    I'd be interested to hear from other users that are experiencing these issues and hopefully together encourage Apple and Adobe to get their heads together and fix what is broken and fix it ASAP.  It isn't good enough that for a machine this pricey we are left out on a limb without an urgent fix being presented.
    I hope we see a fix for this soon but failing that please make 10.9.2 available so we can at least roll back and become productive again.
    Kind Regards
    Alex
    Owner and Principal Cinematographer
    Camera On Films

  • WRT54G XBOX360 and MacBook Pro detection issues

    I have been having some issues detecting my Linksys WRT56G wireless router from my MacBook Pro and an Xbox 360 that is using a Linksys wireless gaming adapter. I haven't had this issue before until I taken it to my friends house on the weekend so I can browse/play wirelessly (my friend doesn't have a Wireless router) and when I installed it back into my house, this issue occurs. My MacBook Pro was able to detect my wireless connection and was able to browse the internet but after a few hours I abruptly disconnect and I can no longer find my wireless connection. The only time I can make this work is by resetting my router every time I cannot find my wireless connection. My Xbox 360 does the same thing but it even gets worse when the XBOX360 and my MacBook Pro are using wireless connection -- we only stay connected for only a few minutes.This is what I have done so far:
    1) Restarted computer, reset Linksys WRT56G, reset DSL modem, reset Linksys Wireless Gaming Adapter, DHCP renew/release.
    2) Installed the latest firmware using Linksys Upgrade and EasyLink.
    3) Reset Linksys WRT56G everytime I get disconnected and can no longer find a wireless connection.
    Please I really need help. I have had this issue for a week and I am so frustrated. Thank you so much and I really appreciate your help.
    Message Edited by aeroform on 09-04-2008 10:57 PM

    Ok, my MacBook Pro and XBOX360 can no longer detect my wireless connection. Even after several resets...

  • AirPort and MacBook Pro Internet Issues

    I have two unrelated issues with my network set-up.
    My ISP is AT&T U-verse, however I use an AirPort Extreme as my main router. The Extreme network is extended by an AirPort Express so that a PC on the far side of my house can receive the connection. In this part of the house, my MacBook Pro can receive the signal, but the PC running Windows 7 with a Linksys Wireless-G USB Adapter will not connect. This is a new problem, as this computer used to be able to connect (but with a weaker signal than my MacBook) up until about two weeks ago.
    The second issue is with my MacBook Pro (2011 model running Lion). Sometimes, when the computer wakes from sleep, I am told that my IP address is in use by another device on the network and that I should enter a new IP address (no idea how to do that). I am unable to get on the Internet when this message is displayed and I have to reboot my AirPort Extreme in order to get back online. I think that when my MacBook wakes from sleep, it is being duplicated on the network because once I was told that the Shared name of my computer was already used and that it would change to Anthony's Macbook Pro 2. It also seems to only happen when the MacBook falls asleep while still open.
    If it helps, these are the devices connected to my network: MacBook Pro (2011, OS 10.7), iMac (2006, OS 10.6.8), PC (Windows 7), PlayStation 3, Wii, iPhone 3G, iPhone 3GS
    Thanks in advance!

    Also, just found out that the two iPhones also will not connect to the Express, just my MacBook.

  • Magic mouse and Macbook Pro Sleeping issues

    Since I upgraded to Lion a few months ago, I've noticed that occasionally my Macbook Pro (early 2010) won't sleep when I close the lid. I think I've narrowed down (at least one of) the cause(s): if I turn off my bluetooth Magic Mouse after the lid is closed, the computer won't sleep. In fact, it will run hotter and hotter with the lid closed and, when I open the computer, it's non responsive, necessitating a hard reboot. I've checked the pmset log and I see the EHC2 (bluetooth mouse) waking the computer immediately after the clamshell sleep. Has anyone else seen this problem (I've seen similar things on the foroum, but not quite the same) and does anyone know what to do about it?

    Repair disk permissions. Open this app:
    Applications > Utilities > Disk Utility.app
    Ensure your current volume is selected in the left hand column. Click 'First Aid' (if its not already selected), then 'Repair Disk Permissions' at the bottom.
    Ignore the various warnings that come up in the 'Details' window, so long you get a message at the end saying 'Permissions repair complete'.

  • Roland TD4SX, Addictive Drums 1.5 and Logic Pro 9 issues

    I have been using AD and Logic with my Roland Drum kit for a little while now and while the automatic mapping from kit to plugin is working for the most part, Logic seems to kill the midi coming from one of the pads (the middle tom 45(A2)) and I'm not sure why. It requires me to remap this pad to another midi key to get it to work. I could only assume that Logic has taken this midi key for its own use but I have no idea how to find out what it is mapped to and how to remove that mapping. Anyone know how to debug this issue?
    I believe this is an issue with Logic specifically. The reason I know this is because that pad and the kit in its default mapping work perfectly in Ableton Live but not in Logic.

    You might find that you have inadvertently 'learned' A2 as a controller assignment. Open the *Controller Assignments* window ⌘-K, and delete the learned message that is 90 39 Lo7 (A2).
    !http://farm2.static.flickr.com/1283/4714022674_7b9b8fd4ac.jpg!

  • Panasonic AJHD-1400 and Mac Pro Audio Issues

    Hi-
    I'm looking to setup a system with the above mentioned hardware. I've heard, however, there is an audio problem (crackling sound) when laying back to this deck via FW. Some have said this was corrected in 10.4.10 but I have no confirmation. Any insight would be greatly appreciated.
    -Paul

    Just chiming in so you don't feel ignored.
    I typically don't layback to the 1400, so I haven't had this issue. I capture from that deck, but output to HDCAM. And when I DID output to the 1400, I was (and still ma) running 10.4.7. I know the issue exists, and I think I recall it being solved with 10.4.10...but that is a question for the Creative Cow and Walter Biscardi and Jeremy G...but I think you asked it there too...I recall seeing this same question.
    I only have a 1200 here at work (and 10.4.10 on my laptop) or I'd test it for you.
    Shane

  • IMac and Macbook Pro Networking Issue

    Just recently both of my Macs have developed a wierd networking issue.  I am sharing folders on my Windows server (WHS), now this odd slow issue appeared when using a file from the server.  It acts like my network is really slow when opening a file, but my windows machines work fine on it.
    I have not made any changes to the server, I am running a Gigabit Cisco network (not linksys) in my home and this thing has got me stumped.  I installed an anti-virus on the iMac and it found nothing.  Either wired or Wireless I see the same results but only related to the Mac's..... does anyone have an idea what might be doing this?  I am kinda a Mac noob in most aspects so I am looking for any help here.

    It very well could be the antivirus app, most are intrusive and debilitate rather than enhance performance and should be removed using the developers instructions. You haven't really told us anything useful such as any settting you may have changed. However if you began working backwards resetting any changes and uninstalling the apps added since the performance issue started then you probably will find your issue. 

  • IWeb and Gallery

    I have posted movies on gallery and set a password. I have then created an iWeb site and protected it with the save password. One of the items on the site is a movie from my gallery. What I find is that to enter the site the password is needed and the same password is needed twice to access the movie. Is there a more user friendly way to do this?

    The answer is in the first and second sentence of your post.
    iWeb and the web gallery are different entities.
    Solution:
    Remove the password of the webgallery.
    Hide the gallery from in the webgallery overview.
    It takes some mental juggling but in the end it's what you want.

  • Mac Pro 2013 and Premiere Pro - The performance issue that Adobe don't want us talking about!

    In May 2014 I bought a 2013 Mac Pro to help my business with the ever increasing demands video editing was placing on our systems.  I was so excited to see how the 12GB of power the AMD D700s would affect my workflow and ability to edit footage seamlessly without delays to the creative process.
    However, to my dismay pretty much since starting to work with the system I found that there was an issue with the GPUs, Mac OS and Adobe’s applications.  It was first reported by many other users in early 2014 and as yet know one from Adobe has really commented officially on the issue.
    Sadly it appears to still be present today and speaking with an Adobe rep confirmed this.  Trouble is no one is doing anything about it.  My hope is that, if you have watched this video and are experiencing the same issues then please let’s get the comments going, share and like the video and let’s get Adobe, Apple and AMD to pick up this with immediate haste! Thank you.
    Below is a video of the problem I have been experiencing.  It's a little long but I wanted to give a good account of the problem we are seeing so that someone can help! PLEASE, PLEASE, PLEASE help!
    Mac Pro 2013 and Premiere Pro GPU Issue - YouTube
    Thank you for your time and I'd love someone to help!

    Thanks for responding!  It's such a pain and I have been chatting to one of Adobe's senior consultants about this and still none the wiser.  I have sent my machine off to the retailer as it was still under warranty.  Nothing wrong with GPU apparently which is a relief although I kinda wish it had been that as it would have been an easier fix.  Adobe told me that working with H.264 is totally possible but if you have a complex sequence with multicam and nested video with effects applied then it will seriously hinder performance.  Sadly transcoding to ProRes doesn't seem to help either and they suggested not adding any effects to the nested clips, flattening out the multi cams etc and this has improved things a bit.  Sent a sequence to SpeedGrade the other day though and the machine had a fit.  FCPX though seems to be working great and has a few advantages over Premiere so I may be making a switch for this type of work until Adobe can sort out this issue.  I still feel that the application isn't fully making the most of the GPUs.  In fact, I found out that multicam is actually all still on the CPU and that they are trying to implement GPU handling of multicam soon.

  • Photo file issues with iWeb and Aperture....also too much duplicating!!

    A little background, before I get into my iWeb issue.....
    Years ago I tried iPhoto, but I didn't like how it duplicated all my photo files and I wasn't very fond of the file structure it created. Years later (last month) I got Aperture. Aperture (still has a long way to go) also duplicates all your files and places them in their own file structure. If I can get along with Aperture (and if it will get along with my other programs), I won't mind putting all my files into the file structure it creates. But for now, I still have my original files in the original file structure I have had for many years as a back up.
    On to my issue with iWeb and Aperture....
    To add photos to iWeb, you can either go into the iWeb media center or you can drag and drop photos from other locations.
    1st: iWeb media center
    To get my photos into the media center, I would have to load them into iPhoto (iP 6 does allow you to keep your original file structure, but it still creates .jpg files, which fills up your hard-drive. More duplicates I don't need or want). So that is out for me. iP6 will let you view and use your Raw files.
    Another way is to drag and drop your file structure directly into the media center window. I don't think this duplicates any files (at least I haven't been able to find any), but it takes an awfully long time to thumbnail all your photos (several hours and still waiting for 22K + files). Also, it won't show any Raw files. Again, out for me.
    Aperture won't let you drag and drop its library into the media center at all. So if I was to move all my files into the Aperture Library, I wouldn't be able to access them for iWeb at all.....Out for me.
    2nd: Drag and Drop
    I was able to drag and drop Raw files directly into iWeb from C1 Pro, Adobe Bridge and Adobe Lightroom.
    As I said before, I am trying to move over to Aperture. However, Aperture won't let me drag and drop photos. What is the deal here??? These are both Apple programs and they won't play nice with each other. Very annoying.
    Anyway, I put a link below to my iWeb test webpage I made. All the photos were Raw files that I did a drag and drop from C1 Pro, Adobe Bridge and Lightroom. There were no problems with the publishing.
    http://web.mac.com/phil_navarro/iWeb/Site%202/Drag%20and%20Drop%20test.html
    So, does anyone know if they can get photos from Aperture to work?? Thanks for any responses.
    Phil
    G5 Desktop   Mac OS X (10.4.4)  

    Jedi,
    Perhaps you are right.
    I am not a web developer and I will never be. I don't feel like spending countless hours learning how to use Dreamweaver or some other Pro web app. iWeb looked like a way to start making websites of my photos for my friends and family (much easier and better than Home Page on .Mac). All I was asking was for a way to drag and drop my photos (especially Raw files) with Aperture. Which I can do with Lightroom, Adobe Bridge and C1 Pro, and without using iPhoto.
    I am not a Pro photographer either, but I purchased Aperture based on what was advertised on the Apple website. From that ad, Aperture fit my photo needs almost to a tee. I am looking to adjust Raw files, Crop, Archive and keep my use of Hard Disk space down to a minimum. I can use Photoshop for the other 5% of things I do. However, Aperture has some issues (if you own it, then you already know. If you don't, you can read the Aperture Forum) This is one of the reasons I never went to iPhoto for archiving. I didn't like the way it duplicated all my files, taking up more disk space and its file structure. So even though Aperture won't play nice with other programs, I was surprised that it wouldn't play nice with any Apple programs.
    After reading your post and based on what you are saying, everyone either needs to have/learn/use Pro apps only or have/learn/use iApps only. Don't Cross the Streams!!
    I guess that means Apple will need to fix DVD Studio Pro. It uses photos that are in your iPhoto library and music from iTunes (iApps in a Pro app??....for shame...."it was never intended"). Also, DVD SP won't read the Aperture library. Does that mean there are 3 platforms? Pro, iApp and Mediocre??
    Now I have 2 questions:
    1. Can someone please tell me which apps are Pro and iApp, or if there is Mediocre? I don't want to mix them up and "Cross the Streams".
    2. Again....is there anyway to use Aperture with iWeb?
    TIA,
    Narvon

Maybe you are looking for