IWeb and uploading jpegs with spaces in their names

I have created a site with about 100 jpegs that I wish to load up to a server other than ".Mac". Some jpegs have spaces in their names, so "Fetch" will not upload them. I deleted the spaces from their names and loaded the jpegs back into the site and saved and published to a folder. However, the resulting "Site"folder shows the jpegs still have spaces in their names, even though I removed them from the name of the jpeg. IWeb must be getting the name from some internal tag or something. For example, I had a jpeg called "Billie Holiday.jpg" I changed the name to "BillieH.jpg", but when I publish the site to a folder, the jpeg still shows up as "Billie Holiday.jpg" and therefore I cant upload it using "Fetch". Where is iWeb getting the names of the jpegs from, and how do I remove the spaces? Or, does anybody know of an application that can upload files (ftp) with spaces in their names?
Thanks,
Mitch

However, the resulting
"Site"folder shows the jpegs still have spaces in
their names, even though I removed them from the name
of the jpeg.
Very strange. You might try renaming the site with Inspector to something else than Site and republishing, to guarantee you have a totally new set of files.
Or, does
anybody know of an application that can upload files
(ftp) with spaces in their names?
It's not the ftp program. You can't have spaces in file names on most web servers, they won't accept the files.

Similar Messages

Mplayer can't play files with spaces in their name

After scratching my head and reinstalling codecs several times without luck, and old memory resurfaced of this occuring before and I managed to solve the problem.
The thing is that if you doubleclick a file in Nautilus, and said files has spaces in its name, mplayer won't be able to play it, and gives a very cryptic error message, ie "cannot play file a%20b.avi" if the name of the file is "a b.avi".
The trick is mentioned in this thread -- you edit /usr/share/applications/mplayer.desktop and change 'Exec=gmplayer %U' to 'Exec=gmplayer %F'.
The bug has been around forever, and hasn't been fixed yet. Perhaps the mplayer devs don't want to fix it. In any case, I would propose that either we fix this in the mplayer Arch package, or that someone more knowledgeable than I get in touch with the devs about it.
Just a suggestion, but I think it's kind of important. It's really confusing to new users.

In my opinion, it it's not arch's job to fix bugs from upstream, no matter if it's mplayer or gnome's fault. Of course there are exceptions, eg if a bug in a critical package hardlocks the whole system, or adds a huge security risk.
I would like to belive that the general arch user is smart enough to find one of the 30 threads about this bug (or the entry on the bugtracker) and fix it themselves. Personaly I would put this in the same category as packages that don't have a .desktop file at all from upstream.
Oh, and as a small sidenote: http://phraktured.net/patching-patching-patching.html

Hi, will my downloadable PDF forms look exactly the same as when I upload but with spaces filled in?

Hi, will my downloadable PDF forms look exactly the same as when I upload but with spaces filled in?

Not sure I understand the question. Are you talking about the "Download Response as PDF" feature (to see the PDF filled out with the filler's data) or the "Download Submission Enabled PDF" (to sent to people to fill out)?
If you imported a PDF in FormsCentral, the Submission Enabled PDF will look exactly the same as the imported PDF plus a submit button
If you designed the form in FormsCentral and save the Submission Enabled PDF it will look very similar to the web form (switch the view in the Design Tab to Page View to see what the PDF will look like)
The PDF doesn't use skip logic or show/hide logic so this mean that the PDF always shows all the form elements
I answered a similar question today. See http://forums.adobe.com/thread/1251981
Gen

I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on th

I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on the FTP server Blog.

You haven't a problem. You simply did not read the iWeb Help :

Jar and classpath with space in folder name?

Hi, all.
Just for fun: what if I have a jar file that is dependant on the other jar file which is placed in folder with space in its name? How would I link it in manifest file?
Thanks.

Havae you tried quoting the Class-Path value?

Restore mailbox when user has a space in their name

Hi,
I've deleted a few mailboxes accidently. I have been trying to restore them from last night's backup (using the Recover Deleted Account tool in the Admin console).
Any users without spaces in their name recover successfully, but all the ones with spaces (most of them) in the Name field won't - you select them, click ok and no user is selected. FOund TID 3989266 which says users with a space in the Mailbox ID can't be recovered, you need to remove the space first. Any idea how I can do that or another way to restore the mailboxes?
Cheers,
Ian

Just wanted to add some more info to my original post and ask a few more questions:
Firstly, my server is GW2014SP1 running on SLES11.3. My backups are done more or less as detailed in a cool solutions post:
dbcopy <domain path> <backup path>/<domain>
dbcopy <po path> <backup path>/<po path>
rsync -avz --delete <agent path> <backup path>/<agent path>
rsync -avz --delete <webaccess path> <backup path>/<webaccess path>
The backup path is then backed up to tape
The path that the domain dbcopy is done to is setup as the restore point for my system, so the previous night's backup is accessible from there and users can restore deleted mail from the client. That's where I'm trying to restore the mailboxes from in the admin console.
If I can't restore the deleted mailboxes using the restore function in the Admin console because of the space in the name, can I somehow re-create the users in my live system with the old file id (TID 3801441 shows how you do it in GW6.5 but how can you in GW2014?) and then login and restore the email from the restore location?
Failing that, I could setup a new server offline and dbcopy the backup to that system. That would put the deleted mailboxes into that system so they could be exported and then re-imported into the live system (once new users are created). However, I don't know how I could login as those users on the offline system without eDir being present. Since 2014 can host users without them being in eDir or AD, I guess there might be a way to do this?
There are 3 users who will need email access tomorrow morning, even if they don't have the old email. Can I setup a temp account with the old email address for those users to use in the meantime?
If I do that, my plan once I somehow find a way to restore their old mailbox, would be:
rename the new temp account,
restore the deleted mailbox & emails
export the new mail from the temp account
import that into the restored mailbox
delete the new temp account
Any help would be greatly appreciated!
Cheers,
Ian

Export of schema with space it its name

we have a schema named "Gestion Loaners" (note the space in schema name) in oracle 9iR2 database. i want to take schema level export but as there is space in schema name i am not able to do it using either escape char or using parameter file..
can anyone guide me pls
thx

It works if the Username is ALL CAPITALS. Couldn't get it work if the Username was Mixed Case
SQL> create user "PAVAN KUMAR" identified by pavan;
User created.
SQL> grant create session, create table to "PAVAN KUMAR";
Grant succeeded.
SQL> create table "PAVAN KUMAR".his_table (col_1 varchar2(5));
create table "PAVAN KUMAR".his_table (col_1 varchar2(5))
ERROR at line 1:
ORA-01950: no privileges on tablespace 'USERS'
SQL> alter user "PAVAN KUMAR" quota unlimited on USERS;
User altered.
SQL> create table "PAVAN KUMAR".his_table (col_1 varchar2(5));
Table created.
SQL>
ora10204>exp hemant/hemant owner=\"PAVAN KUMAR\"
Export: Release 10.2.0.4.0 - Production on Wed Nov 5 22:33:47 2008
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user PAVAN KUMAR
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user PAVAN KUMAR
About to export PAVAN KUMAR's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export PAVAN KUMAR's tables via Conventional Path ...
. . exporting table HIS_TABLE 0 rows exported
. exporting synonyms
. exporting views
. exporting stored procedures
. exporting operators
. exporting referential integrity constraints
. exporting triggers
. exporting indextypes
. exporting bitmap, functional and extensible indexes
. exporting posttables actions
. exporting materialized views
. exporting snapshot logs
. exporting job queues
. exporting refresh groups and children
. exporting dimensions
. exporting post-schema procedural objects and actions
. exporting statistics
Export terminated successfully without warnings.
ora10204>

Libproxy.so eat out the last past of my request with space in the name

Hi,
I used the following 2 configurations:
1. Solaris: iPlanet Web Server WebLogic 6.1
2. W2000: IIS WebLogic 6.1
Both of the web server just work as a gateway. All static and dynamic pages (images, JavaScript file, CSS file) are served by the WebLogic Server. (This sounds a little bit wierd. So we dropped this kind of configuration already.)
I configured both the Web server to forward all requests with "*/portal/*" to WebLogic server. It works fine except the requests with space inside. For example:
http://localhost:8080/portal/abc def.html
(I encode space to when I type it in browser).
And I got a 404 error. (The file is really there.) And I checked both web server's access log, I saw the request for "abc def.html", but when I checked WebLogic's access log, I saw the request for "abc". So I think Weblogic's proxy eats out the last part of my request: "def.html". Of course, WebLogic server could not find a file called "abc" in that directory.
And finally, in order to test my observation, I created a file called "abc" in that directory. And then the browser shows the content of the file "abc".
Does anyone see this kind of problem before? I think this is a bug in weblogic's proxy program.

Hi.
Are you seeing this in both configurations (ie both iPlanet and IIS)?
Does the problem go away entirely when you hit the servers directly (ie iPlanet and IIS aren't involved)?
Are you running any service packs? You should be using service pack 2. If you are not please upgrade and use the plugin from this latest service pack.
Regards,
Michael
Xin Liu wrote:
Hi,
I used the following 2 configurations:
1. Solaris: iPlanet Web Server WebLogic 6.1
2. W2000: IIS WebLogic 6.1
Both of the web server just work as a gateway. All static and dynamic pages (images, JavaScript file, CSS file) are served by the WebLogic Server. (This sounds a little bit wierd. So we dropped this kind of configuration already.)
I configured both the Web server to forward all requests with "*/portal/*" to WebLogic server. It works fine except the requests with space inside. For example:
http://localhost:8080/portal/abc def.html
(I encode space to when I type it in browser).
And I got a 404 error. (The file is really there.) And I checked both web server's access log, I saw the request for "abc def.html", but when I checked WebLogic's access log, I saw the request for "abc". So I think Weblogic's proxy eats out the last part of my request: "def.html". Of course, WebLogic server could not find a file called "abc" in that directory.
And finally, in order to test my observation, I created a file called "abc" in that directory. And then the browser shows the content of the file "abc".
Does anyone see this kind of problem before? I think this is a bug in weblogic's proxy program.--
Michael Young
Developer Relations Engineer
BEA Support

Sort artists with numbers as their names first

Not to long ago, iTunes used to sort artists that had numbers in their names (311, 2pac, 50 cent)
first on the list, which i loved because numbers should always come before letters, but in the recent updates with itunes, numbers are now last after the Z's
Can someone give me a solution for this? a registry key or something maybe?

I did a litle cheat. I have some artists that I WANT to list at the top and before I did the
1. [artist name]
2. [artist2 name]
But since they decided to list these at the bottom (stupid decision), I mass updated the info on each artist to start with a.1, a.2, a.3, etc. This now lists the artists at the top in the order I want them in. A very nice easy workaround. No telling what Apple will do down the road, it's obvious they think #'s should be after letters. Contrarian company, I swear.
Message was edited by: Jerry Ferguson1

MS Access DB with Spaces in Column Name

Good Afternoon-
I'm having some serious headaches with a table that I need to extract information from. The powers that be wrote it with the following column names "Contract Number" , "Customer Number", "Description".
Note the spaces in the columns.
Sample code from here: http://www.planet-source-code.com/vb/scripts/ShowCode.asp?txtCodeId=2691&lngWId=2
I'm using sample code for connecting to the database and I can access everything using the select statements, except if the column contains a space. I get the following errors:
s.execute("select [Customer Number], Name from Customer");
Error: java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 1.
s.execute("select \"Customer Number\", Name from Customer");
Error: java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 1.
s.execute("select Customer*Number, Name from Customer");
Error: java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 2.
s.execute("select 'Customer Number' , Name from Customer");
Data from column_name: Customer Number , Unknown
This works, but would require parsing-
s.execute("select * from Customer");
Data from column_name: 5 , Unknown
Suggestions would be truly appreciated.
Jason

"select [Customer Number] , Name from Customer " ;
returned the correct responses.Double quoted identifiers, which is part of ANSI SQL should have solved it....
"select \"Customer Number\" , Name from Customer " ;
As mentioned above it has certainly been my experience that DBAs (those with that title) all insist that quoted identifiers should never be used. Thus refactoring the database identifiers is actually the correct solution.

SYMLINK won't work with space in folder name

Using Terminal commands, I can create a SYMLINK for OS folder if there is no space in folder name, such as -
sudo rm -rf ~/Library/Mail/
ln -s /Volumes/Mr._Mac/Mail/ ~/Library/Mail
But if there is a space in the OS folder name, commands won't work, such as -
sudo rm -rf ~/Library/Application Support/AddressBook/
ln -s /Volumes/Mr._Mac/AddressBook/ ~/Library/Application Support/AddressBook
Terminal returns the following message -
ln: Support/AddressBook: No such file or directory
Is there some sort of symbol that needs to be used instead of a space so that Terminal reads the folder name as one word?
I've tried % which is used for HTML, but that doesn't work.

Put the entire path in single quotes or put a \ before each space. If you drag a file or folder from the Finder, it'll automatically supply the correct path.
(77913)

How to do a Get-ADGroup and pass SamAccountName with spaces

Hi,
I read a text file of groups in SamAccountName form into a variable, then do a Get-ADgroup to ensure they are in a specific SearchBase, then I want to delete them if found in the Searchbase. Problem is the SamAccountNames have spaces in them
and I cant figure out the right syntax in the Get-ADGroup for the $Group variable to accomodate the spaces, or put quotes around the $Group variable. Examples of SamAccountNames are Accounts Payable and LDW URP
$EGroups = Get-Content c:\MyGroups.txt
[int]$counter = 0
Foreach ($Group in $EGroups) {
Try {
$counter++
$DMGroup = Get-ADGroup -Filter {SamAccountName -eq $Group} -SearchBase "OU=Test,DC=Acme,DC=Com" -SearchScope Subtree
Remove-ADGroup $DMGroup -Whatif
$Group | Out-File $env:HOMEPATH\EGroupsRemoved.txt -Append
Catch {
$Group | Out-File $env:HOMEPATH\EGroupsNotRemoved.txt -Append
Write-Host "Processed $counter Groups"
Thanks for your help! SdeDot

If you're using the SamAccountName then I would recommend you use the parameter set that allows you to provide it to the -Identity parameter, not the -Filter parameter. You can see the three parameter sets if you do a Get-Help Get-ADGroup and look in the
Syntax section. The example below will read in groups listed in a text file, even if there are spaces in the groups, and return information about each of them as they pass through the Get-ADGroup cmdlet. You'll definitely want to keep your try-catch blocks
in place to help gracefully handle any issues where a group cannot be found in the directory.
Example Text File
ADMIN-Front Office Staff
ADMIN-Front Office Students
$Groups = Get-Content -Path 'C:\GroupFile.txt'
Foreach ($Group in $Groups) {
Get-ADGroup -Identity $Group

IWeb and uploading to a different .mac account

where do I set the settings for the specific .mac account I want the web published to?
I have 2 .mac accounts and I would like to post to both .

I suspect that this is controlled by whatever details are provided in the Account pane for .Mac in System Preferences.

LibreOffice can't open files with spaces in the name

Hi, so I recently installed LibreOffice (from extra) over go-OO. I know the site says it's not for production use but I have heard good things about the stability of the current version so I decided to see if it was in a usable state. In general things are going great, but I do have the problem mentioned in the thread title. The program has trouble parsing the spaces, and instead I am trying to open each space-delimited section of the filename as a separate file. Trying to open "My File.odt", for example, will simply return two error messages, one about "path/to/current/directory/My" not existing, and another about "path/to/current/directory/File.odt" not existing. I can't seem to get around this behaviour and, surprisingly, I can't find anything on it by Googling.
I know that LO is in beta and this may just be a bug that is being worked on, but since I can only find one reference to it on the net I thought that maybe others were not having this problem or had found a way around it. Can anyone provide any insight? Cheers!

vimex wrote:
comment these lines in /usr/lib/ooo-3.3/program/soffice
the $* has some problem, but I do not know how to correct this...
# Setup our app as oosplash, but try to avoid executing pagein,
# and other expensive environment setup pieces wherever possible
# for a second started office
#if [ "$sd_binary" = "soffice.bin" -a -x "$sd_prog/oosplash.bin" ] && [ "$no_oosplash" != "y" ] ; then
# sd_binary="oosplash.bin"
# export QSTART_CHECK_ONLY=1
# if "$sd_prog/$sd_binary" $*; then
# exit 0
# fi
# unset QSTART_CHECK_ONLY
#fi
I noticed that commenting out that code allows LibreOffice to open spaced filenames, but seems to slightly increase startup time.
I tried replacing $* with "$*", and opening from the command line seems to work even for files with spaced names, with the faster startup time too. The only problem is that now LO does not work at all by clicking; only from command line.

How move file with space in the name to another foler on Linux from ABAP?

Hi experts,
My requirement is to move the file on Linux to another folder via ABAP program.
IN SM49 is defined ZMOVE command for "mv" operating system command. In ABAP, fm:
SXPG_COMMAND_EXECUTE calls ZMOVE external command to move the file to another folder.
But in case that file has space in the file name, then the fm gives error and the file can not be moved.
I have tried as given in the Note 1152084 - Parameter for external commands but it doesn't work.
Don't know if the reason is that the note is for Windows or Unix and we have Linux.
So, I have tried with ''%file name%' and '''file name'''.
PLease advice hoe to move file on Linux to another folder from ABAP program if the file has spec in the name.
Thanks in advance.
Kind regards,
Danijela Zivanovic

Hi,
You can also try :
mv "file\ name" /<path_to_new_dir>
(Put "\" before each space)
Regards.
Rajesh Narkhede

IWeb and uploading jpegs with spaces in their names

Similar Messages

Maybe you are looking for