Iweb and Win7

I have a problem with my iWeb page. You have to use username and password to access this page. Before win7 all went well. Now users are saying that some of the text disappears, and it has become impossible to download programs from the page. When they try to download via a link on the page, the are asked for username and PW repeatedly.
the page is ok with other OS versions.
Any solution?

Do I win a prize if I correctly guess the URL of the page?

Similar Messages

I am trying to move a picture that I brought over from iWeb and it is locked. I need to move it. Can anyone help?

I am trying to move a picture that I brought over from iWeb and it is locked. I need to move it. Can anyone help?

It is probaly just "inline" ie part of the text.
click on it > Inspector > Wrap > Floating
Peter

How do I access iWeb and iDVD on my new Macbook Air?

I just bought a new MacBook Air and read that I can load iPhoto 11, iMovie 11, and GarageBand from the app store, which I did. I don't see iWeb or iDVD anywhere, on the MacBook or in the app store.
I guess iWeb and iDVD are part of the iLife 11 package, which does not come with the MacBook Air (thought it did), but I wanted to check in case I am overlooking something.

If you have another Mac that you can connect to your Air with a local area network or int the Target Disk Mode, Transferring files between two computers using FireWire, you would be able to run the iLife 11 installer disk on the other Mac and select the Air as the location for the installation.
OT

I am using a new imac with osx lion 10.7.5 and have bought a copy of Apple iLife 11 on dvd a so that I can install iWeb and idvd, when I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate

I am using a new imac with osx lion 10.7.5 and have just bought Apple iLife 11 on dvd so that I can install iWeb and iDVD, as macs no longer ship with these apps. When I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate.
Next problem is that when moving through the installer and get to custom install, as I only want to install iDVD and iWeb, I am presented with the option to install iDVD, Sounds & Jingles and iWeb, but not sure what is going on with the other 3 options iLife Support etc, they seem to be greyed out but still look like they may install over the top of the newer versions already on my imac. Is it ok for me to just go ahead and hit install? Or do I have a problem?

Yep, just install iDVD (plus sounds and jingles) and iWeb if you want it (but note that iWeb apparently won't work if you upgrade to Mountain Lion).
Then use Software Update to get any late iDVD updates.

IWeb and multiple users

So i'm trying to see how i can set up a website in iweb and edit that website from multiple computers and it stay up-to-date. is there a way to do this?

thanks, that does help a bit, i think i can figure that out. my next question is what happens to my existing iweb sites if i try to open a different DOMAIN file from a different source?
ie: i have like over 20 iWeb sites in my iWeb 2.0 that are in a DOMAIN file stored in the default location. if i go to open (by double clicking) a DOMAIN file from an iDisk for instance to edit it and it opens iWeb, what will happen with my other sites? and will this set that iDisk DOMAIN file location as my default?

Share iTunes Library between OSX and Win7 Bootcamp

I've done quite a bit of research on this but I still haven't found a solution that does what I require.
Basically my setup is a SSD & HDD in my MBP. I have OSX and Win7 (Bootcamp) on the SSD and the NTFS HDD is a shared file storage drive for both Windows and OS. I have my iTunes library located on this drive and I want to be able to share the library between the OSs. I also want changes e.g. additions deletions made in windows to be reflected in OSX and vice versa.
Technically this is possible and does in fact work if I point iTunes to the .itl file but the problem is that when I open iTunes after switching OSs it must go through a very lengthy library update which can take 30-60mins in some cases before I can use it. Obviously this is not a good solution so I'm wondering if there are any workarounds to accomplishing this?
For example can I duplicate the .itl file and have one for win and one for OSX and still have the libraries stay in sync?

Just for your info, Vista ***** whatever you try to do. I'm stuck with Vista on a pre-installed laptop. All experience I have from Vista is bad, don't buy Vista or a computer with preinstalled Vista if you can avoid it.
We have three computers in a home network, one Macbook Pro, one PC with Windows XP, and the Vista laptop. All are using iTunes-8, downloaded and installed last week.
Sharing iTunes libraries using the option to share libraries on a local network works fine between Mac and Windows-XP. The sharing also works fine between the XP and the Vista PC.
But the Vista PC can't access the Mac iTunes library. When trying to open the Mac library, iTunes on the Vista computer says something like "Fetching library info from...". It's the same problem when trying to access the Vista library from the Mac.
We had a similar problem when trying to access shared folders on the local network. Thanks to a tip on this forum how to tweak the Vista registry, the shared folder problem was solved.
I'm think some registry setting in Vista might solve iTunes shared library problems. Maybe some Windows freak knows how to patch the registry to solve this issue.
Otherwise the solution is to trash Vista, and install Windows-XP.

Arch and Win7 cannot open an NTFS partition created by the other

This is almost certainly related to another post where I was struggling to create logical partitions from Windows. Basically, Linux and Minitool Partition Wizard agreed that there were no logical partitions, but the built-in Windows disk utility said there was. I ended up using fdisk from Arch install media, and Minitool and Arch now both saw the logical partitions (Windows shows a big extended partition of free space). I installed Arch just fine, can boot to it and win7... life is good.
Not so much. A key to my setup is having an encrypted partition to share data between OS's. I used TrueCrypt with great success on my former laptop and am now having great difficulty!
Some preliminary information:
# fdisk -l /dev/sda
Disk /dev/sda: 238.5 GiB, 256060514304 bytes, 500118192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x1e6513b3
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 2101247 2099200 1G 7 HPFS/NTFS/exFAT
/dev/sda2 2101248 172433407 170332160 81.2G 7 HPFS/NTFS/exFAT
/dev/sda3 172433408 390537215 218103808 104G 7 HPFS/NTFS/exFAT
/dev/sda4 390537216 500118191 109580976 52.3G 5 Extended
/dev/sda5 390539264 391587839 1048576 512M 83 Linux
/dev/sda6 391589888 500118191 108528304 51.8G 83 Linux
I also went partition by partition to check Minitool's agreement on sectors (they match perfectly with the exception that it doesn't show the extended /dev/sda4 container). I triple checked the Minitool partition info properties as you can't copy and paste from it's window, and pasted the fdisk output to minimize errors. I'm showing a column for mini/Arch for both start/stop sectors, and just subtracted them to make sure I got 0. Appears to be perfect alignment:
| part | start (mini) | start (arch) | diff | | end (mini) | end (arch) | diff |
|------+--------------+--------------+------+---+------------+------------+------|
| sda1 | 2048 | 2048 | 0 | | 2101247 | 2101247 | 0 |
| sda2 | 2101248 | 2101248 | 0 | | 172433407 | 172433407 | 0 |
| sda3 | 172433408 | 172433408 | 0 | | 390537215 | 390537215 | 0 |
| sda4 | 390539264 | 390539264 | 0 | | 391587839 | 391587839 | 0 |
| sda5 | 391589888 | 391589888 | 0 | | 500118191 | 500118191 | 0 |
- Screenshot of how Minitool sees my disk
- Screenshot of how Windows disk utility sees my disk
I used TrueCrypt 7.1a on both OS's. I created a non-system encrypted partition using the GUI on Arch with the AES cipher/sha-512 hash, with filesystem as "none." Once created I did:
$ sudo cryptesetup --type tcrypt open /dev/sda3 vault
That worked fine, which I followed with:
$ sudo mkfs.ntfs /dev/mapper/vault
It initialized the device with zero's and then gave me the success/have a nice day message. Closed the volume and rebooted. When I tried to open the device from win7, I got "Incorrect password or not a TrueCrypt volume." Hmmm. I guess I'll try in reverse. I duplicated the procedure exactly as above from win7, this time having TrueCrypt automatically format with NTFS. All succeeds and I can open the device. Reboot into Arch and I get the same message from TrueCrypt! If I try with cryptsetup, it's "No device header detected with this passphrase."
Next, I tried just doing NTFS with no encryption. From Arch:
$ sudo mkfs.ntfs /dev/sda3
All goes well and I can mount it. I boot into Windows and it's not even listed! I used Minitool to issue it a drive letter, at which point clicking that pops up a windows dialog box asking me if I want to format the disk. Format the partition with NTFS in Windows, reboot into Arch and I get:
[jwhendy@arch_zbook ~]$ sudo mount /dev/sda3 /mnt/scratch/
NTFS signature is missing.
Failed to mount '/dev/sda3': Invalid argument
The device '/dev/sda3' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Doesn't matter if I add "-t ntfs" or "-t ntfs-3g." I get the same result.
Just to add a couple more oddities... when I created the NTFS partition in Arch, I also created a file called vault.tc as a TrueCrypt file-based encrypted container. My thinking was that the issue was with TrueCrypt full-partitions and that I could get around it with a plain partition containing an encrypted file. Reboot into windows and the partition isn't shown (as stated above). From Minitool, if I right click the partition and choose "Explore," it lists the partition contents and there is my vault.tc file. Windows thinks it's unformatted!
I noticed the option to backup/restore a TrueCrypt header, and gave a shot at backing up the working TrueCrypt setup on windows to a flash drive, booting to Arch, and then restoring the /dev/sda3 header from the flash drive file. Arch still couldn't open it.
Lastly, I noticed when I go to select a device to encrypt in TrueCrypt, my logical partitions aren't showing up (just like Windows only sees the end of the disk as free space). I just can't help but think something is tweaked in the partition table... basically:
- TrueCrypt sees what Windows sees
- Arch sees what Minitool sees
How could I go about diagnosing further or fixing the issue. This is driving me crazy!
I'd hate to do this given that I already setup my wm, configs, packages, etc... but my last resort attempt would be to wipe my logical partitions and see if I can at least get the win7 disk utility, minitool, arch, and truecrypt to like each other with respect to /dev/sda1-3... and then try to re-add the logicals afterward and re-install arch? I honestly don't know why this would be any different, but was just a thought. The issues from the other post seem to arise with logical partitions not being recognized the same between win/linux.
Or figure out how to just use primaries (like dedicated boot on a USB drive or something). Or fiddle with growing/shrinking windows to see if I can undo whatever is telling windows where/what things are? Really grasping at straws here.
Last edited by jwhendy (2015-06-10 23:32:22)

Hi Ramesh,
Please install the hotfix package and test the issue again:
http://support.microsoft.com/kb/2817576/en-us
In addition, try uncheck the option “confirm open after download” per:
http://jritmeijer.wordpress.com/2006/08/20/some-files-can-harm-your-computer-if-the-file-information-looks-suspicious-or-you-do-not-fully-trust-the-source-do-not-open-the-file/
Regards,
Rebecca Tu
TechNet Community Support

Can i create a website in iweb and convert it to wordpress?

Can I create a web site in iweb and then convert it to wordpress?

Yes, you can create a website in iWeb.
To convert the published pages, ANY webpage, to WordPress depends om your skills to do so.
Start here : http://www.google.com/search?q=convert+webpage+to+wordpress

I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on th

I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on the FTP server Blog.

You haven't a problem. You simply did not read the iWeb Help :

TS2167 I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?

I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?

Just in-case anyone els runs into this, I figured it out... I was working from my hotel and apperantly the fire wall was not allowing anything to uplaod, but I wasn't getting an error message from iweb, it would say that everything was published succesfully even though it wasn't. Once I went home and used my connection eveything worked fine.

In IOS7 none of my YouTube movies show up on my site build with iWeb and its YouTube widget. On an iPad running IOS6 the site still works fine, and all movies play well. What is going on,and what can I do to solve this problem ???

In IOS7 none of my YouTube movies show up on my site build with iWeb and its YouTube widget. On an iPad running IOS6 the site still works fine, and all movies play well. What is going on,and what can I do to solve this problem ???

It's only Safari/iOS7. Chrome iOS7 works fine.
Solution?
Go to YT and grab the code.
Paste it in a HTML Snippet.

HT4686 How can I publish my website developed using iWeb and have all functions of the blog page work as it did with MobileMe?

I have developed a website using iWeb and it includes a blog page selected from stock pages in iWeb. I'm publishing it with GoDaddy and when I do that the interactive functions of the blog page don't work. (Adding comments and photos as well as searching). Is there any simple way to host this site somewhere so that those functions work?

No, because all those functions were MobileMe only and now that MobileMe has gone, they won't function any longer.
To enable these to function, you either need to add them yourself or change your blogging platform to something else such as WordPress etc., and create a link from iWeb to your WordPress blog or embed the blog page using iframe into your iWeb site.
Commenting systems such as Disqus or http://www.intensedebate.com work quite well.

My new computer does not have iWeb and I can't open the files from the old computer. What can I do???

I'm really desperate. I used to publish to a blog directly from iWeb, then I discontinued it. When I made the switch to iCloud, I wasn't worried because I knew my files would always be there. However, once I got a new computer, I transferred all the old files to an external hard drive and I thought everything would work just fine. Well, it didn't Neither can I open iWeb nor can I find my files.
Can anyone help me please?

New Macs have not shipped with iWeb for over 2 years and Apple has not sold or supported iWeb for at least 2 years now - Apple stopped selling it and dropped support for it when MobileMe was ditched in favour of iCloud which does not offer hosting.
If you want iWeb, then you will need to have a look at your old installation CD's for your old Mac and see if iWeb is on these and you can then install it from there or if you don't have these CD's any longer, then you'll have no option but to purchase a copy of either iLife 09 or iLife 11 from Amazon - these boxed sets both contain iWeb 09, which is the latest version of iWeb.
Other than this and as you have not done your blog for sometime, perhaps you should consider re-creating it from scratch with a software that is actively supported and updated - that is NOT iWeb any longer.
You could try using WordPress, either .com or .org - .org is good if you already have hosting and you can install WordPress directly onto your server. If you want something free, then you could use WordPress.com which is then published on the WordPress servers.
You could also take a look at EverWeb from Rage Software, which is very new and is very like iWeb with all the extras, such as drop down menus etc. Take a look at http://www.everwebapp.com.
As for your files, it sounds that when you say files, these might be the published files for your site, if you went into iWeb and published them to a local folder? This is not a backup and even if you could find these files, then iWeb will not be able to open them because it has no import facility, so cannot open an already published site - html and css files.
What you need is your domain.sites files which can be found under your User Library/Application Support/iWeb/domain.sites.
I would cut your losses and if you don't have iWeb, then don't bother paying for software that is now outdated and unsupported - move onto to something new and re-create everything in either WordPress or EverWeb.

Problems with iWeb and mobile me

Ciao everyone,
I've been having a ridiculous amount of problems with my mobile me account and my iweb. 2 weeks ago I was fine with my iweb and mobile me but all of a sudden my iweb would say it publish but it really doesn't publish. The I went to the mac store a couple of times and thought I would get answers but I didnt get any answer even though I had a couple of one to one visits with a couple of stores in NYC. So when i publish it it shows that it published in my www.me.com/idisk/iweb folder but then it doesn't show in my website. Then one guy told me that I should just recreate a new site but copy and past all the old information to the new one. Now it won't publish at all because I guess its a lot of information to publish at once. I get an error message saying error iweb was not able to publish please try again later. Any help?

Hey you guys,
Thanks for the help, but I did try to publish all to my iweb and it didn't work. I do try to view my published website through the file/visit published site and for some reason only my intro page is there then when i go into the main page i get an error page. I also did go to my finder/Go/idisk/myidisk/iweb/site/iweb and saw my websites folder. Everything seems to be in it. I tried to take a screen shot of what is in my folder but I can't post pictures. In my folder I have a folder for gallery, index.html, site, shites.rss, and my website folder usvisualswebsite
Any other suggestions? This is really frustrating. I also created another test site with nothing in it and published it and it says it finishes publishing but the blank test page isn't there.

Camera raw 6-7 beta and + win7 64

cameraraw6-7_r1_win_030612 won't install on my Win7x64 machine
I extracted the zip to a folder on my desktop, selected & doulble cliked AdobePatchInstaller, selected "RUN" and I get "error loading updater workflow"
Did I get the wrong thing? Is there a 64 bit only version?
cvt

Well duh - should have thought of that!
Thanks
cvt
Noel Carboni <[email protected]> wrote:
Noel Carboni http://forums.adobe.com/people/Noel+Carboni created the discussion
"Re: camera raw 6-7 beta and + win7 64"
To view the discussion, visit: http://forums.adobe.com/message/4268181#4268181

Iweb and Win7

Similar Messages

Maybe you are looking for