IWeb and Windows - it doesn't work?

Just spent a whole evening putting together a website for my music project. All went well, with regular publish tests. This morning I booted up a PC and checked my creation within Explorer. Ouch! Only the text bits came out. All the photo images and fancy stuff were invisible! Is this to be expected? Total waste of time.
Here is the link:
http://web.mac.com/guyjackson1/iWeb/Mexeena%20site%2006
G5 Mac OS X (10.4.8)

Welcome to the discussions, guidow.
You're absolutely right, IE IS a total waste of time due to it's poor handling of graphics. Unfortunately, if a site is meant to be viewed by the largest audience, that's going to include a LOT of IE users.
First, what version of IE are you using? Is it version 6 or much older? Also, do you have Java turned off? Either of these can affect how you (and, by extension, your viewers) are able to see the site. Essentially, IE is very bad at displaying PNG images with a transparent layer so a workaround was devised to force IE to display them properly. This requires a script to run as soon as all the images are loaded and, if Java is off, the script won't run. This should, however, leave your images looking like each one is behind a grey window, so perhaps there's something more here.
The solution is to convert your images to .jpg's before placing them on your site and then ensuring that they are placed with no resizing.
BTW, like the layout of the site. I'll take another look at it with IE when I get to work.

Similar Messages

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader inorder for the previewer to work.

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
Can anyone recommend a solution?

If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
My Acrobat version is 11.0.10
I am running Windows 7 Professional with Service Pack 1
My Internet Explorer is Version 11.0.9600.17691
Update Versions 11.0.17 (KB3032359)
I am running Microsoft Office 2013

Bootcamp and WIndows 7 doesn't work

Hi,
well I'm kinda freaking out. Since I installed a SSD myself into my Imac 21,5 inch, I had to replace the optical drive with the SSD. So now I had the prblem that I wasn't able to install Win 7 via Bootcamp since it doesn't support external DVD-Drives. After trying every solution provided on the internet I decided to open the Imac again, reinstall the optical drive, install windows 7 and replace the optical drive again. When installing Win 7 there was no problem, it booted and all worked fine. So I installed the bootcamp drivers for Win 7 and so on. And then, after reinstalling the SSD, Win suddenly was unable to boot. I get nothing but a black screen with a white blinking "_". I thought what the .... and came to the conclusion something went wrong. But before freaking out I had the idea to try VMware. After clicking on Bootcamp and clicking on start, it all worked. I was able to boot into Win 7, install updates and so on. So I guess nothings wrong with the installation. But what is it then? I can't figure it out and I would really hate hate if I had to reopen my Imac because it really *****...
Well If anyone's able to come up with I solution I would really appreciate it!
Thx in advance
David
PS: All drivers are up to date!

I've been trying for a day and a half to get it to work on my 27". Ive swopped the superdrive for an SSD too.
I didn't realise that you couldn't install it from an external drive so i'll stop wasting my time with that one.
For the record I've tried to,
Make a bootable USB stick drive - didn't work
Make a bootable Hard Drive - didn't work
I'm going to swop the HD for the optical drive and try to install it on to the SSD. Then i'll take the CD drive out and replace the Hard drive. See how that goes!
I'll keep you updated...
David... Did you sort your problem? if so how?
Thanks
Lee

HT4061 Drag and drop function in Windows 8 doesn't work with iTunes.

How to import music files from Windows 8 to iTunes 11.0.3 x64? Drag and drop function doesn't work. Thank you!

> Straight drag and drop to PS produced a warning message so, when I then tried to drag on to the PS task bar button, I got the Ø cursor but on moving into the PS window and releasing the mouse button there, the file opened.
That's the strangest behavior that I would imagine. Are you using the default vista aero theme or you have turned down or using custom theme and visual effects?
> it needs to be pointed out that this is a really bad habit that will smack you in the face one day...
I don't understand what you mean. If you are concerned about viruses, in my understanding copying and opening a file from the internet which is what "Save image as" does, is less safe than coping and pasting pixels. Copying and pasting pixels is the same as coping and pasting text from your web browser, it can't execute hidden code. If that was possible everybody will get viruses at the moment text or pixels are displayed on your browser.
By the way when you view a page from the internet, image files are already downloaded in the temp folder of your computer but only the browser uses them unless you open them from there and use in another program. So if you have a virus protection the images are already scanned.

I clicked "yes" to upgrade iTunes and now it doesn't work. I get an error message stating my computer is missing MSVCR80 and then a message stating Error 7 (Windows Error 126). I've tried reloading iTunes twice. What can I do?

I clicked "yes" to upgrade iTunes and now it doesn't work. I get an error message stating my computer is missing MSVCR80 and then a message stating Error 7 (Windows Error 126). I've tried reloading iTunes twice. What can I do?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Application Restart and Recovery APIs doesn't work for windows services

I am using the Application Restart and Recovery mechanism (provided in Windows API Code Pack for Microsoft.NET Framework) to collect some information (i.e. stack information when there's an unhandledexception) before my windows service crash down.
It works well for windows form applications, but the callback method wouldn't be called if the host is a windows service.
I have checked the article: https://msdn.microsoft.com/zh-cn/subscriptions/downloads/cc303708
But it doesn't specify clearly whether it works for a windows service. It seems that the recovery will only be activated when the user interacts with the error dialog of Windows Error Reporting (clicking "close" on the dialog, for example).
So I am wondering is my guess right that the Application Restart and Recovery mechanism doesn't work for windows services. Or is there a better way to meet my requirement?

I would suggest trying ARR if that's what you want to use. The restart portion won't work, but it doesn't need to as if you fail out of your service, the Windows service controller will handle recovery (up to and including restarting your service).
You configure those recovery actions either through code or one of the built in administrative tools for services such as services.msc.
DebugDiag/ADplus and similar tools ultimately do use built-in APIs; you don't need to add anything external to collect debugging information. You do however have to write a good deal of code to do somethings. It's pretty simple to use the unmanaged
function that I pointed out before and
MiniDumpWriteDump to write a minidump when you hit an unexpected error(the dbghelp.dll that comes installed with Windows has it so you don't need anything additional installed). You can even write a basic debugger that literally debugs a process using
only kernel32 functions (see
https://msdn.microsoft.com/en-us/library/windows/desktop/ms679301(v=vs.85).aspx if you're interested).
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

It's because of the extension of the hard drive is a Windows extension ( most likely MSDOS or Ex-FAT), meaning you can only read but not write. If there are no important files (or you can copy the whole thing to your computer/mac) you can just reformat the hard drive and change the extension to NTFS (readable and writable on both windows and mac) or Mac OS Extended (readable and writable on Mac, readable on windows).
Go to DISK UTILITY
Choose the Hard Disk you intended
ERASE
You can choose either
(I personally prefer this one, you know just in case)

Help - Font Book and font Library doesn't work

I've just updated to a new iMac on Yosemite, and Font Book doesn't work. Neither does putting fonts into the "Library"
There is a range of fonts that ARE working that are already in either place, but some (that worked up until two days ago in my old Mac running OS 10.6.8) just won't work.
If I select the fonts in Font Book, Font Book doesn't load them. If I put them in the Library, they don't appear for use in any application.
As a designer, updating fonts is essential, and if this can't be fixed I'm in serious trouble! So any advice welcome!

We see posts like this here all the time. A person upgrades to a new OS, and Font Book suddenly stops working. Usually, the problem is that Font Book's database has been trashed by the upgrade with the very common symptoms you're seeing. You suddenly can't add fonts, and fonts Font Book says are open don't appear in some, or any apps.
Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point. Yosemite is a bit different. Whether it's a Safe Mode boot or a normal one, you get the same progress bar. It just takes longer to get to the desktop in Safe Mode. So hold the Shift key until you get to the desktop.
OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
If that alone doesn't do it (it should), then clear out all of the font cache data.
Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current logged in user account. After running the command, close Terminal and immediately restart your Mac.

HT201263 Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTune

Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTunes.Help! Thank you.

Besweet, I'm having the very same problem with 60GB colour which was bought new and worked for 6 months before suddenly just not being recognised by PC. I hadn't changed anything at all.
I've followed all troubleshooting advice and reinstalled and updated iTunes and iPod updater software but all troubleshooting routes seem to hit the dead end of either the need to access the iPod via the PC (which isn't possible as it's not showing up at all) or the iPod in disc mode stuck at "ok to disconnect".
It's still under 1yr warranty so will have to take to a dealer.
I'm sorry that's not much help for you but at least you know it's not a unique problem.
PC Windows XP

When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?

When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?

Try:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Mac Mail Version 6.0 (1486) has stopped recieving mesages regularly and the search doesn't work

Mac Mail Version 6.0 (1486) has stopped recieving mesages regularly and the search doesn't work.
Since installing Mountain Lion, Mail seems to be very unresponsive. I have mac mail running on an iMac (which works fine) and a 2012 MacbookPro which is the one having the issues with the Mail app. Both computers are running on Mountian Lion.
When I scroll up in Mail for instance, the frame rate drops to about 5 a second.
When I click on a message it doesn't display it in the preview pane. Which is very annoying!
But I can get around the issue by double clicking on a message and it opens up the message in a new window.
When I search for a message, nothing appears in the results. Even if Im searching for something that is defiently there, eg if I type in my name, you'd think some results would come up. But when I click on something else, the results dispaly for about half a second. Bizarre. Is anyone else having this problem?

what kind of error in browser you are seeing?
is search service application never starterd or its started but cannot crawl?
did you see the timer jobs related to search services and what's their status?
so what about the search results from site collection?
also make sure this service "SharePoint Search Host Controller Service" started on all servers in the farm.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
In the browser I receive the following error:
The search service app is running, doesn't crawl:
Yes, I can see the timer jobs related to search services, some of them are Succeded, others are Scheduled.
The service SharePoint Search Host Controller Service is started in the first server of the farm, but not in the second
one. When I try to start it, I receive the following error:
Windows could not start the Sharepoint Search Host Controller Service on Local Computer. Error 1067: The process terminated unexpectedly.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

The plus sign next to my tab stopped working: when I click on it nothing happens. I tried uninstalling and re-installing and it still doesn't work.

The + sign to add a new tab suddenly stopped working a while ago. I tried uninstalling and re-installing and it still doesn't work. What may have happened and how do I fix it?

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Files deleted from the Library and now internet doesn't work?

Hello,
I'm new here and this is probably going to sound dumb but... my father deleted some files from the Library by mistake and now internet doesn't work in his computer. Everything seems normal, but the webpages don't load (we tried lots of pages and 3 browsers). If you try to update any software it can't connect to the internet either.
He reinstalled the system (it's Mountain Lion, I think) but it didn't worked (it was a partial reinstallation, without losing the data). He also tried restarting and pressing CMD-R but nothing happened.
Any ideas on how to solve this problem? Thank you so much in advance! (and sorry for any typos, English is not my native language)

Hello Eleone, & a warm Welcome!
So what exactly isn't working or any messages you get?
Does Mail still work?
Might try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

TS1406 I read all of this, and did each step and mine still doesn't work. It still says "iTunesSetup.exe is not a valid Win32 application". What's next?

I read all of this, and did each step and mine still doesn't work. It still says "iTunesSetup.exe is not a valid Win32 application". What's next?

Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

GPO don't run specified windows applications doesn't work to in win 8.1. any ideas why?

GPO "don't run specified windows applications" doesn't work to in win 8.1. any ideas why? it is enabled and list of progs is entered however I can still run all progs on list. This is a local machine not on a domain. I must
have this work to disable games, IE, MSpaint, etc. Computer has been restarted since enabling the GPO and also have enforced the GPO via CMD prompt. worked fine on windows 8 and 7.

Any success ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

IWeb and Windows - it doesn't work?

Similar Messages

Maybe you are looking for