IWeb: changing the slideshow image scale and viewing time

I moved my iWeb sites over to another server (iPage) and went through the sites to observe for inconsistencies and problems. While doing this, I noted that my image galleries, when placed into the slides show mode, were very small on my iPad 2 and that they cycled through at a very high speed. I thought this was odd and I wondered if anyone else has observed the same thing? It sounds to me that an HTML under-the-hood modification may be required or a bug fix to the iWeb code is in order, to change the sideshow image scale and viewing time/slide value. Comments? [I suspect that Apple does not hold iWeb bug fixes at or near to the top of its software development to-does priority list. Sounds like I need to change web authoring software.]

Why do you think it's a bug?
Anyway :
Is there any reason photos in an album page display small on the iPad, but normally on an iMac? And videos on a movies page don't play on the iPad, but are OK on the iMac?
I use my own show :
http://home.wyodor.net/photo/

Similar Messages

How I change the save image dialog box view from oldest to newest first as the default?

My save image dialog box has the oldest file in the folder in the upper left position (using list). I want to change it to the newest file shown first. It used to be that way, but now it showing oldest first. I haven't found any guidance on defaults for this box. Thanks.

Leave it to Apple. When I first got the phone, that's the way they were configured. Now that they've flipped around, there's now way to change it!

Is there a way to have parallax scrolling and a changing slideshow? (so the slideshow looks still and it looks like you scroll your content over it again)

Is there a way to have parallax scrolling and a changing slideshow? (so the slideshow looks still and it looks like you scroll your content over it again)

You can apply opacity to images or define key position for slideshow so that with page scroll the opacity changes and will bring the similar effect.
Thanks,
Sanjit

Downloaded a trial version of the "Living Earth Desktop" screensaver and cannot get rid of it. I deleted the download and cannot find it anywhere else on my mac. I will change the desktop image and the living earth image will pop back up minutes later.

Downloaded a trial version of the "Living Earth Desktop" screensaver and cannot get rid of it. I deleted the download and cannot find it anywhere else on my mac. I will change the desktop image and the living earth image will pop back up minutes later. Does anyone know how I can make this image stop taking over my desktop? Thanks!
http://download.cnet.com/Living-Earth-Desktop/3000-2049_4-10789812.html
This is the website.

IF you know the exact file name of the download, you can search for it in the spotlight.
(This icon) in the upper right corner.
If you don't know the exact file name, you may have to redownload it so you can see it.
I would also try doing a reboot after you change your desktop background to what you want.

I just purchased the SX60 and have been trying to find the way to change the "startup image".

I just purchased the SX60 and have been trying to find the way to change the "startup image". I have the SX40, Sx30 SX1 and all allow me to change the startup image and the sounds through MyCamera. When I opened MyCamera, it tells me that it won't work on my model. Does anyone know how to change the startup image? In the menu it gives me the choice to either have it on or off. Thanks so much!

Looks like Canon has changed what they ship with the newer cameras. My SX50 came with a disc & no paper manual. Because of that I searched the Canon site (USA site) & found the program set you need to download (according to what it says). Now there are different versions based on your operating system so for my search I've chosen Win 8.0 & the program file recommended is
File Description Date Size
Digital Camera Software 4.3 [Windows]
09/16/14
22.26 MB
File Name: dcsw-4-3-0-2-9l.zi
"A skill is developed through constant practice with a passion to improve, not bought."

How can we change the state of records in view cache and entity cache

Hi everybody,
I am trying to achieve selective rollback, or selective commit. By this I mean that I am looking for a way to change the state of rows in view cache, so that the selective changed rows can be rolled back during comit.
if anyone has tried anything in this please help me.

I agree!
I can't top this approach.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Help me change the background image

I just installed my copy of iWeb. The first thing I did after selecting a template was try to change the background.
I hit the inspector button, found the tab with the background stuff, selected image fill, fit to size, and chose my photo. And nothing happened.
Then I hit the media button, selected photos, dragging a photo to the background image in the inspector and nothing happened.
What is the secret to changing the background image?
Thanks.

I tried to delete everything but the background image that comes with the template and iWeb still refuses to change to anything I want to change it to.
Any ideas? The application doesn't seem to be working for me.
Also if I save a file, where on the local HDD does it get saved? When I hit save iWeb didn't allow me to set a file name, it apparently just saved the document somewhere in a place that I cannot find.
I want to be able to do some quick down and dirty web pages and then bring them into Dreamweaver at a later date and FTP them to the web.

Changing the background image?

If I associate a UIImageView that is being used for the background image in my view,
In the header file:
IBOutlet UIImageView *theBackground;
@property (nonatomic, copy) UIImageView *theBackground;
and @synthesize it, in the implementation file:
@synthesize theBackground;
that I ought to be able to dynamically change that image (for example, in viewDidLoad) with the following statement:
theBackground.image = [UIImage imageNamed:@"Default2.png"];
But all that happens if I try that is that the program starts up and crashes.
Default2.png is present.
Anybody have an idea what I am doing wrong?
Thanks,
doug

I think this is because UIImage does not conform to the NSCopying protocol
According to [The Objective-C 2.0 Programming Language|http://developer.apple.com/documentation/Cocoa/Conceptual/ObjectiveC/A rticles/chapter5_section5.html], @property(copy) creates something like
if (property != newValue)
[property release];
property = [newValue copy];
(note that the implementation may not be exactly as shown).
So in your program, UIImage is being sent a copy message.
[NSObject Class Reference|http://developer.apple.com/documentation/Cocoa/Reference/Foundation/Classes/NSOb jectClass/Reference/Reference.html#//appleref/doc/uid/20000050-copy] wrote:
-(id)copy
*Return Value*
The object returned by the NSCopying protocol method copyWithZone:, where the zone is nil.
Discussion
This is a convenience method for classes that adopt the NSCopying protocol. _An exception is raised if there is no implementation for copyWithZone:_.
NSObject does not itself support the NSCopying protocol. Subclasses must support the protocol and implement the copyWithZone: method
Regards,
Thomas

How to change the color picker/color space view?

I wanted to change the color picker/color space view to what it looks like in the other Adobe programs. I have gotten used to using the color picker from the other programs and I have had problems with the look and function of this color view.
In InDesign the color picker looks like this:
And the Photoshop/Illustrator/etc. looks like this:
I've tried changing the "Convert To Profile..." and the Transparency Blend Space, but neither have done anything to what I want to be done.
Is there some way to change this in InDesign?
Note: I want to change the looks of the gradient-like area if that isn't obvious.

I was wanting to do the same change as you, until I saw your two images.
Within the InDesign image you've selected a dark blue colour (R:16, G:49, B:152) AND you've got the (R)ed channel selected.
Within the Photoshop image you've selected a white colour(R:255, G:255, B:255) AND you've got the (H)ue channel selected.
In Photoshop I can recreate both of your images by having the same settings for RGB/CMYK and selecting the same channel item as you have in those images.
That's all.
There is no difference between the two colour selection dialogs except where the HSB, RGB, CMYK and LAB are placed.

How can I change the name of a Materialized View?

How can I change the name of a Materialized View?

Oracle permitted renaming the snapshot in the earlier versions of 8i. However, it does not permit renaming the materialized view in 9i or 10g.
SQL> rename mymatview to mymatview2;
rename mymatview to mymatview2
ERROR at line 1:
ORA-32318: cannot rename a materialized view
SQL> disconnect
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - 64bit Production
With the Partitioning, Oracle Label Security, OLAP and Data Mining options
SQL> rename mymatview to mymatview2;
rename mymatview to mymatview2
ERROR at line 1:
ORA-32318: cannot rename a materialized view
SQL> disconnect
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.3.0 - Production

How do I change the lable of next and previous button in GAF of FPM

Hi Experts,
How do I change the label of next and previous button in GAF application using FPM in each individual step?
Thanks!

Hello Anthony,
as far as I am aware only the final step before the confirmation screen can be changed. Which you can do by clicking on it in the configuration view - click on the last but one step - and click on the next button - at the bottom of the screen you'll get a view where you can change the label of the step.
There is some logic in this - in that it does make for a more consistent user experience across various apps.
It's different to how we could do things in Java - but it's nice that there is a certain level of conformity across FPM apps.
hope this helps,
Cheers,
Chris

Changing the Chart Title in Graphic View in Interactive demand Planning

Hi All,
Is it possible to change the Chart title in Graphic View in interactive demand planning screen.
When we go to interactive planning after loading the data we go to Univariate forecast then switch to graphic, the chart title shows the selection at which the planning is done. For eg; If I plan at die level and i select a particular sap material, the chart title displays Die value and not the material value.
Is it possible to change the chart title such that it displays all the selections made in selection winodw, like in the above case both Die value as well as SAP Material Number.
Thanks and Regards,
Diana

Dear Diana,
unfortunately this is not possible.
The chart title is build from the planning book name + the Show characteristic in the shuffler (+ available nav. attributes of the Show char).
The functionality you requested doesn't exist in standard.
Regards,
Tibor

Create one button to change the background image

Hello,
can anyone help me create a button for a SPA525g phone which changes the background image of the phone which is now :
<BMP_Picture_Download_URL group="User/Screen">http://192.168.2.2:5000/provisioning/logo/cisco525g.jpg</BMP_Picture_Download_URL>
The button should also call to *1232
So with button IN the image should change to ciscoOUT.jpg and call to *1232
And button OUT should change the image to ciscoIN.jpg and call to *1231
I now have already
<PSK_1 group="Phone/Programmable_Softkeys">fnc=sd;ext=*[email protected];vid=20;nme=IN</PSK_1>
I also tried to do :
<PSK_3 group="Phone/Programmable_Softkeys">fnc=xml;url=http://192.168.2.2:5000/provisioning/logo/cisco_logo.xml;nme=scrp1</PSK_3>
where cisco_logo.xml contains :
<?xml version="1.0" encoding="utf-8"?>
<CiscoIPPhoneImageFile>
<Title>Image1</Title>
<Prompt>Prompt1</Prompt>
<LocationX>0</LocationX>
<LocationY>0</LocationY>
<URL>http://192.168.2.2:5000/provisioning/logo/cisco50xg.bmp</URL>
</CiscoIPPhoneImageFile>
but then nothing happens ? I can see the image and choose update , but that is it.
Plus I want to combine the two option.

anyone who can help me out here ??

Change the logo image in a seeded template

My application adopts template "Tabs (2) no left nav1". I want to change the logo image of the template to my own one. How to do that?
I have uploaded the image to Image Repository by Utilities wizard. And found the following text in editing "Tabs (2) no left nav1" template:
<td rowspan="2"><img src="#IMAGE_PREFIX#generic_home.gif" height="72" border="0" alt="logo"></td>
But what shuld I change #IMAGE_PREFIX# to? what's the substitution string for Image Repository?
Thanks,
May

Scott,
Thanks. I have changed my logo following the steps.
Just found there is a minor overlook on the documention:
"...First, we need to include the substitution string #WORKSPACE_IMAGE# referring to the location ..."
It's missing "S" after IMAGE, should be #WORKSPACE_IMAGES#
Thanks,
May

Changing the linked image for the Image Matte Key doesn't work

When I change the linked image for the Image Matte Key in Photoshop, the link does not change in my Premiere Pro CS6. Sometimes it takes 2-3 times going into the Image Matte Key setting and locating the new matte in Explorer (each time having to re-locate the folder that the matte is in) to see it within the premier monitor. Any suggestions?

Hi
The commands work correctly here on the same OS etc: Cycle Locators jump to the next/prev marker and the Playhead jumps to the Start of the Marker.
Default KC are Control Command +Arrow Left/right
Step 1: check you are using the correct key command :-)
CCT

IWeb: changing the slideshow image scale and viewing time

Similar Messages

Maybe you are looking for