IWeb domain name for new website?

Hello!
I am new to iWeb and have created a website and now have questions about publishing it. The site I am creating is a replacement for an existing website that I did not make. I want the domain name to be the same as the existing site (cscfarm.com) and just to replace the old one with mine. Now, I would rather not join mobile me because I don't want the confusing url name and I already have permission to use cscfarm.com. My question is, do I have to get the FTP address from the person that currently runs the website? And if so, since I am using iWeb '08, how/where do I enter the FTP address to publish the website? I know that if I had '09 or higher I could do it through iWeb but I believe '08 is different. Am I going to need professional help for this or should I just get iLife '11 OR is it really not as hard as it seems? Any help/suggestions is appreciated!! Thanks so much!

Hi There,
BC does NOT host your domain.
You will need to keep it with your current Domain Registra or transfer it to another domain registra if you wish to close your account with Weebly. This has nothing to do with BC.
The EPP code is just a means to veritfy ownership of the domain and ensure such a transfer is approved by the owner of the domain.
In terms of BC all you do in the domain manager is to point all traffic or just web traffic to BC depending on your requirements/use of email etc.

Similar Messages

How to configure internet domain name for P6 website using weblogic

After installing and configuring weblogic for P6 you get the following address https://servername:7002/console/login/LoginForm.jsp to access P6 website. Anyone know how to configure a purchase domain such as www.mydomain.com have it redirect to https://servername:7002/console/login/LoginForm.jsp Is this configured in weblogic server? If not, what is needed to redirect the purchased domain?

HI
You could have that domain resolving to/by some DNS servers and set up a load balancer / proxy to redirect every incoming request to that domain / site to your weblogic console.
however , what is it you are trying to do? It is very unsual of redirecting/ using Domain names to redirect to wls consoles.
could you explain your use case in detail please
Sri

Free domain name for .mac websites.

Is there any free site that works with .mac's personal domain feature. I have one through microsoft office live (free) but cannot seem to find out how to do it through that. Any information?

http://www.ulimit.com/en/vdns.php
http://www.dot.tk/en/pageA00.html
But these are only redirects (with cloaking maybe). They aren't CNAME. I don't think there is any free domain name who does CNAME.
Regards,
Cédric

Iweb Domain Name problem

I bought a domain name for my site and I am having trouble getting my page to link to it. Anyone have any tips??? CompBiz ( the domain company) says the problem is getting the correct url to link to....
G4 Mac OS X (10.3.9)

That is what I have for my first site with them, and that has worked for a year. I just created a new site for our Boy Scout troop. I have it linked FROM my joeneb.com site, and it works that way. However, when I linked that site to the name I bought (dillsburgtroop38.com) it does not work. The Compbiz people told me that is because there is a % in is url......
I don't know what to do...

How to change IP, Hostname and domain name for Oracle Application R12

Hi,
I'm new to Oracle, we used to have one production and one test server for Oracle Application R12, but the test server was corrupted, so we decided to clone production server and create a new test server, after cloning and creation of test server, how should we do to change IP address, hostname and domain name for test server?
Our production and test server environment is:
Linux Enterprise AS 2.6.9
Application module: E-Business Suite Treasury only
Your advice will be much appreciated.
Regards,
Kenneth
Edited by: 850209 on Apr 7, 2011 5:37 PM

850209 wrote:
Hi,
There are few tnsnames.ora and listener.ora files in the system, how to know which one are effective? If I change tnsnames.ora hostname entry, do I need to change listerner.ora file also?
Thanks.
Regard,
Kenneth.tnsnames.ora is used only by client processes. listner.ora is used only to configure the listener, and that is a server side issue only. In addition, the listener can start without any listener.ora at all, using all default values. See my discussion of tns issues at edstevensdba.wordpress.com
If you are using dbcontrol, you will most likely need to reconfigure it, using the emca utility.

Netbios/Partial Qualified Domain name for a Mac?

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

that did not work - I have a name entered in the
Sharing preference menu, and it does not show up.
Did you try setting the "DHCP Client ID" in the Network pane of System Preferences?
Even doing this may not work though... I know I had trouble getting a host name to show up correctly at my work. The DHCP server had picked up the previous name of my system and there didn't seem to be anything I could do from the client side to get it changed. The old system name was associated with my machines MAC address in the DHCP server and nothing I did from the client seemed to allow me to refresh the name the server had already latched onto. The network guys eventually had to delete the entry for my system off of the DHCP server and then allow my system to request a new IP address and refresh it's entry in the server. I have no idea how you might do something like this on a LinkSys router. I suppose the DHCP servers that run on these little personal routers are pretty rudimentary. I guess you might try doing some sort of reset on the router to see if it would reload client names. Or if you have your router configred to only allow connections from specific MAC addresses you might try deleting the entry for your Mac and then adding it back to see if that would trigger it to pick up a new client name.
sorry; I started a new thread because my question
is now much more focused. Someone told me the
Linksys router gets that info from the netbios name,
so I figured I should ask that specific question
with that specific subject title - maybe someone
knows how to specify this netbios name for a Mac,
but might not know or care anything about routers
and my specific problem.
It seems understandable that PCs would send their NetBIOS names to a DHCP server... but it seems to me that a Mac would send it's "sharing" name. I doubt that a LinkSys router would specifically request a NetBIOS name, but I don't really know... I don't have any experience with them. I suppose you could try turning on "Window Sharing" in system preferences to see it that made you Mac look more like a Windows box to the router. :^\
Steve

How to Use 'uid' for AD Users Without Domain Name For User Log in OAM

How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.

I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein

"Untitled" as default document name for new documents

I have one installation of Adobe Illustrator CS2 in a Mac with which I have the following problem:
Whenever I go to File->New, to create a new document, the default document name is blank, and it should be "untitled".
Is there a way (without reinstalling) to correct this? (turn the default blank document name to "untitled" default document name, for new documents)
Thank you.
Juan Poniachik

On what Mac? If it's on a new Mac with Snow Leopard, I would guess it is one of those compatibility issues of new OS vs. legacy software. If so, you can't change any of that. Other than that I can only think of trying to edit the document templates...
Mylenium

How to change the name / IP address and domain name for BOE Server

Hello,
We want to change the name / IP address and domain name for BOE Server, please could you indicate the steps or procedure to follow?
I need your help
thank you

If it's 3.1 just change them, shouldn't cause any issues if by domain name you are referring to changing the domain the computer belongs to. If you are changing your domain for AD authentication then you will may have to take quite a few steps if the old domain is going away. Let us know.
Regards,
Tim

HT204053 I had Snow Leopard and was using iWeb and Filezilla for my website (not MobileMe). Wanting to move to single-click publishing, I now find it is not supported by iCloud and Mountain Lion. I feel cheated, having bought it mainly for this purpose!

I had Snow Leopard and was using iWeb and Filezilla for my website (not MobileMe). Wanting to move to single-click publishing (supported by MobileMe), I now find it is not supported by iCloud and Mountain Lion. I feel cheated, having bought it mainly for this purpose! The other thing they don't tell you is that Mountain Lion disables OfficeMac, and I am considering uninstalling it for that reason - do I get my money back?!

You stated; "Mountain Lion disables OfficeMac"
That is not true.
Mountain Lion does not have Rosetta so it is not capable of executing PowerPC code. If you have MS Office 2004 that is coded in PowerPC code and will not run in Mountain Lion. What you need to do is upgrade to an Intel version of Office.
Allan

DNS Domain Name for SAP System

Hi,
I am installing BI7.1 , it is asking for DNS Domain Name for SAP System.
What to give i dont know please some one help
Thanks,
Jack

Hi,
Pls chk this link;
http://en.wikipedia.org/wiki/Domain_name_system
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
Regards
CSM Reddy

How to set Netbios/Partial Qualified Domain name for a Mac?

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

You're looking for something completely different if
what you're after is to have your DHCP server (your
router) report your computer name.
yep - that's what I'm looking for but everything else didn't pan out so I'm following up the suggestion of our IT guy (which is that it reports the Netbios name).
I don't know what brand or model of router you're
using but with a Linksys brand router it reports the
yep - I've got a Linksys, about 2 years old (802.11b).
computer name, which is set on your Mac under Apple
menu --> System Preferences... --> Sharing. The
Linksys router will report the computer name
typically found under Status --> Local Network -->
DHCP Clients Table.
nope - I've got it set as "Michael Levin Laptop", but the Linksys router shows it (and all of the other Macs on the network) as "¸#Ð„ª"... Any way to debug this?
What you'll notice is that none of this has anything
to do with Windows. Today's basic networking is
platform agnostic.
I thought so; it was a desperation move, based on my IT person's suggestion...
Thanks,
Mike

Addon Domain Name for Exchange 2013.

Dear All,
I have one exchange Server 2013 ([email protected]) but my organization have more 5 domain name. Now we need add in the exchange server more 5 domain name for mail ID. It's possible in exchange server to add addon domain name for mail ID.
Md. Ramin Hossain

Yes Absolutely. You can add as many as you want, they are added under Accepted Domains.
Make sure you have already pointed the MX Records to your exchange server and after adding the domain to accepted domain you will start receiving the emails.
Where Technology Meets Talent

Netbios/Partial Qualified Domain name for Mac?

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

Domain name for iWeb in 'Lion?'

I wan to know how to manage my website on two different computers and after looking at other questions, a lot of people are suggesting to each other that all you do is to copy the 'domain name', locates in home folder-library-application support- iweb. however I cant seem to find the 'Library' in the home folder. does the Lion software have this. how do I access my domain for my website on Lion?

Your search in this forum would have found this :
http://www.wyodor.net/_Demo/Aptana/iWebSites.html
And this :
https://discussions.apple.com/message/18937299#18937299

IWeb domain name for new website?

Similar Messages

Maybe you are looking for