IWeb Error: "Your search did not produce any results."

I just updated my iWeb and added the new search and comment features to my iWeb site. I am happy to see these features added but the search feature gives me a page displaying "Your search did not produce any results." Does anyone else have this issue? I am using my .Mac account and did a "Publish all to .Mac" to see if that would help. Comments work great. Can anyone help? Not good to have a feature that does not work.
Cheers!
Patrick

I am having the same problem and can probably give you an answer as to why the search feature is not working...
Look carefully and you may notice that by re-publishing your site with 1.1, iWeb has converted all text on your site to image files (probably .png). This is what happened when I re-published.
Therefore, there is technically no text to "search" through...
No fix as of yet... I will ttry to republish yet again tonight

Similar Messages

Your search did not produce any results

Hi,
I'm publishing my iWeb site to my ME.COM account.
I have the site password protected as offered in iWeb.
But when the site is password protected the search with the iWeb search field does not provide any results.
Only the message:
"Your search did not produce any results."
If I disable the password protection for the site in iWeb and republish, the search provides the expected results.
Any idea what's wrong?
Thanks and Regards,
JO

Sorry, didn't test enough.
After publishing a few new blog entries under the password protected site, I tested the search again and it does not return any results.
It was working for a short time when I republished unprotected and then again protected.
Now that I added block entries under the protected site mode, search is brogen, again.
Any Help?
Thanks and Regards,
JO

"Cannot evaluate parameter 'NewName' because its argument input did not produce any output." error received

I need to rename a set of files with a subset of the files' original name. I wrote this script:
dir | rename-item -newname {if ($_.name -match '\d{4,5}\-\d{5}\s\-\s(.+)\s\-\s.+\s\-\s.+'){$name=$matches[1]; -replace '.+', "$name";}}
This works in that the file and/or directory names are changed, but it also gives me the error:
Rename-Item : Cannot evaluate parameter 'NewName' because its argument input did not produce any output.
At C:\...\FileStrip.ps1:1 char:28
+ dir | rename-item -newname {if ($_.name -match '\d{4,5}\-\d{5}\s\-\s(.+)\s\-\s.+ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidArgument: (Vivek Shyam:PSObject) [Rename-Item], ParameterBindingException
    + FullyQualifiedErrorId : ScriptBlockArgumentNoOutput,Microsoft.PowerShell.Commands.RenameItemCommand
I'm not sure how to fix this. Any assistance would be appreciated.

ok, thanks.
You've avoided the whole 'use the piped data implicitly' thing by the explicit ForEach. I'm ok with that, but I'm still curious how to get the non-ForEach version to not error.
Anyway, what you provided almost worked. I modified to be this:
dir -file |
   Where{$_.name -match '\d{4,5}\-\d{5}\s\-\s(.+)\s\-\s.+\s\-\s.+'} |
   ForEach-Object{
        $match=$matches[1]
        $newname=$_.Name -replace '.+', "$match"
        Rename-item $_ $newname
to get it working properly.
But it looks like the simplest form is:
dir -file |
   Where{$_.name -match '\d{4,5}\-\d{5}\s\-\s(.+)\s\-\s.+\s\-\s.+'} |
   ForEach-Object{
        Rename-item $_ $matches[1]

cm:search is not returning any result when logical operator '!' is used.

<cm:search is not returning any result when logical operator '!' is used.
I am using BEA 9.1 content management services API. When I run the following query I am not receiving any results. Also no error or exceptions are seen in the weblogic or cmspi log.
The query is <cm:search id="docs" query="!(object_name like 'Sport*')" />

HI cam
Thanks for your reply, but i found the problem it was because my server administrator password has changed by network guys... and because of it crawler unable to access the content
I wrote my solution here i hope it will help other people
http://bvs-sharepoint.blogspot.com/2015/03/sharepoint-search-is-not-returning.html
RB

BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.

Replenishment - Msg WT134: Store order processing did not return any result

During the Replenishment run using TCODE: WRP1 following error is being encountered
<b>Msg WT134: Store order processing did not return any result</b>
The error is reported when more than 9 articles are being used.

impelemented the oss note: 979935

I lost my password and i could get into my phone, i tried but it said connect to itune. i did, but i did not get any result. please give me some advises how do i get my password back or reset with a new one?

Ipjone6, silver, 64GB
I lost my password and i could get into my phone, i tried but it said connect to itune. i did, but i did not get any result. please give me some advises how do i get my password back or reset with a new one?

how to reset password:
https://iforgot.apple.com/password/verify/appleid

WorkFlow Error -Strategy RR_MANAGER did not determine any approver

Dear ,my expert:
I work in SRM7.0 .SRM extended classic scenario.I want to use the contract one-step approve workflow and active it .
one-step approve :/SAPSRM/C_CT_600_001_SP04
And I set the manager in the ORG. Plan
After I releasing one contract ,I get one red message in the Processor "Strategy RR_MANAGER did not determine any approver "
So ,What is the problem ? Your reply will be useful to me !
BestRegards!
Alex!

Hi,
What happen when you run the FM 'RH_GET_LEADING_POSITION' IN se37 dirrectly.. check the OSS note 1363088 if your SP level is below 5..
Saravanan

SQL 2012 - SSIS Error -The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.

Hi guys
Trying to run this package on SQL 2012 agent and getting below error . No more details I could find so far.
The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.
About Package - Its connecting to different version (2000,2005,2008,2008R2,2012) servers and putting Jobs information into one Database table.
Any workaround or fix ?
Thanks
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

New package or one that used to work? Connecting how? How does it poll?
On the surface it is an error from a memory space of the binary/non-managed code, so nothing can be really concluded based on what you decided to share with us.
Arthur My Blog
So Same package is working fine from my local machine which has SQL 2008 R2 and SQL 2012 installed. I am trying to push the package on server which has sql server 2012 Installed .
I don't see any error .
I ran package manually from server using SQL Data tools and ran successfully...
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

RDP Error: Your credentials did not work. SAP AS ABAP 7.4 SP5 incl. BW on SAP HANA 1.0 SP7

Hi Experts,
I have created instances from the SAP Application Server ABAP 7.4 SP5 incl. Business Warehouse on SAP HANA 1.0 SP7 [Developer Edition] free trial solution, as it is described in documentation. But I cannot connect to the Frontend Server instance (Windows 2008) via Remote Desktop Connection, I got a message: Your credentials did not work. User: Administrator, with the master password (pwd not mistyped, while it works on PUTTY, via Saplogon, etc.). I have a 64-bit Windows 7.
I have done the following so far:
First I have created an instance with the Public option, but the same RDP error. Then I have created a new instance as a Corporate Network. The result is: I can connect to VPN service, I can ping the Windows server, but I cannot log on to it with RDC. On AWS I have opened all ports for this instance. Then I updated my RDP, JAVA, enabled RDP on Firewall. Just for a test, I have also switched off Firewall and the AntiVirus program, still nothing. I have tried a Remote Desktop Connection to my Windows Instance from another laptop with Windows 32 bit system (from home and work too), and still facing the same problem: Your credentials did not work. Then I have also tried a tip from windows site (enablecredsspsupport:i:0 into .rdp). When I start the RDC, I get a certification error: The server name on the certificate is incorrect, but I can proceed. Now the windows logon screen on the remote system appears, but still the same result: The user name or password is incorrect.
I would really appreciate some help.
Thanks,
Andrea

Hi Yogesh,
Unfortunately this problem is not solved, I still cannot use the Frontend Instance. I use another solution: I manage to access the SAP Backend instance ( SAP HANA and AS ABAP ) from my local client (laptop). The disadvantage of this solution is that I had to install myself the client part ,but at least it works.
Regards,
Andrea

Updated to yosemite, now in iPhoto when I try to send a photo I get the following error'Your email did not go through because the server did not reply'. Help please.

Hi, I've recently upgraded to Yosemite. I tried to send a picture out from iPhoto as I regularly do without issue. Now I get this error message, 'Your email did not go through because the server did not reply'. Can you help please?

Try rebuilding your iPhoto library. Directions are simple Rebuilding the iPhoto library. Please post back after doing the rebuild and then re-testing.

Robohelp 9 WebHelp - Searching doesn't produce any results.

Hi, I upgraded to RoboHelp 9 last week and now searching in Webhelp doesn't produce any results. I've created a new project, used the sample project, tried generating it to a new folder and results remain the same.
When I select the search tab, the status bar flutters with the "Waiting for file...." displayed indefinetly with the occassion display of the javascript: (void);
Screens shots are from the RH 9 sample project. Results are the same with my projects. CHMs generated work fine!
Any suggestions?

Mary
You added the problem to another thread that was not related as the issue there is the use of HTTPS. I have deleted that post.
You also started a second thread with a the same question. I don't understand how asking the question twice will help so I have locked that thread but created a link to this thread so that anyone with an answer can help you. If there is a reason for starting a second thread, please let me know.
Please just ask once and wait for a reply as this wastes moderator's time that is better used trying to answer questions.
Now to the problem. Searching with Chrome installed works just fine for most people so the problem seems to be local to you. If I have read you correctly, after installing Chrome, the search breaks no matter what browser is used.
Was that checked on other machines or just yours?
IGNORE THIS QUESTION - The answer is YES and that was in the post.
Did you also check that search was broken with the supplied sample projects? I know that works with the three browsers being discussed here?
Where was the help installed when tested by you both standalone and from the application?
Questions 2 and 3 are really only related to problems with Chrome. I have not seen anyone report Chrome also breaking the search in the other browsers. There's more to this than meets the eye as Chrome has not caused that problem for anyone else, or at least, no one has reported it.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Avoid JDBC sender error: Execute statement did not return a result set

Hi!
My JDBC sender adapter towards MS SQL server works fine, with an Execute statement calling a stored procedure that returns the source data needed. The stored procedure itself updates the status of database table records, so that only the unread records are returned each time the stored procedure is called.
However, the communication channel monitoring sets a red flag for the JDBC sender adapter, when there are no values to fetch from the database table (using the stored procedure). Message says: "Database-level error reported by JDBC driver while executing statement 'EXECUTE FetchMessage 1, 9000'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor."
This is not an error situation, as I do not expect there to be any values to fetch from the database at all times.
I do not see how to change the stored procedure to avoid this error.
Is there a parameter to be set on the JDBC adapter that I can use, so the red flag is avoided?
Thanks for any input!
Regards,
Oeystein Emhjellen

Hi Oeystein Emhjellen.
The problem is Store Procedure that has to generate always a ResultSet (or cursor). If it doesn't have a output, you have to generate an Empty ResultSet.
Like a SELECT Statement:
If there are data, SELECT get an output result but if it get nothing the SELECT Statement get a empty ResultSet.
Ask to your database team.
I hope it helps you.
Bruno.

Currency Translation not producing any results

Hello Everyone,
I have ran into a very strange problem with the out of the box currency conversion. I have a finance app and am using the Fxtrans script logic to execute my currency translation. The problem I am having is when I run the FX Restatement package I not getting any results. LC has the correct amount that was input but my other reporting currencies show zero. My Entity dimension (which is named Company) has the correct currencies in the currency column for each company, and the InputCurrency dimension has all of my currencies listed. Everything else is the same as the AppShell app set. One last note is I do have some additional dimensions in the finance application but I don't think that would cause any issue.
My Rate cube is built the exactly the same as the rate cube in appshell app set. The only difference is my category dimension is named scenario.
I have updated all the system constants files and the script logic to reflect the dimension name changes. Everything works as expected in the Appshell application, but I just can't seem to figure out why it won't work in my appset.
I am sure I have left out some details that are needed so please just ask and I will provide whatever I can. I really appreciate any help anyone can provide.
Thanks in advance!
Nick

So I figured out the issue. For some reason the data that was in the WriteBack table for any currency other than LC was not showing up in the report. Once I optimized the application the currency conversion showed up as expected.
Has anyone had this problem before. Any known solution?
Thanks,
Nick

New SP Custom List results in Power Query Error: Expression.Error: The key did not match any rows in the table.

Hi,
I'm running into something that seems to be a bug in Power Query. I've got my Power Query tables from SharePoint lists into Excel and Power Pivot data model. (Making sure the SharePoint site is in English and I replace MMD columns with normal columns).
But then, when I close down Excel, add another custom list to SharePoint, open the Excel workbook and want to add that new custom list using the same connection (via recent data sources).
It shows the newly added custom list in the explorer but with an error:
Nothing I can do to fix this; restarting Excel or PC; nothing.
The only way I got around this was by removing all my existing data sources and re-create them..
after that, the same SharePoint custom list WAS read with Power Query without an issue.
Thanks,
Jeroen

Its because of recent updates to Power Query.
In recent updates internally their is some change in syntax for reading particular table from list (I faced this issue while reading data from Excel file, i.e After applying recent update of Power Query my Queries which were working fine before starting
throwing same error that yo are facing).
As solution their is small tweak to be done in existing queries, instead of recreating all queries. If you can provide me your complete old query from Advanced editor then I can point to tweak that need to be done.
Thanks,
Sagar K

IWeb Error: "Your search did not produce any results."

Similar Messages

Maybe you are looking for