Iweb Hyperlink Format not working!

Hello,
I am using version 3.0.3 of iWeb. I think this must be the latest version.
No matter what I do, I cannot get the FORMAT tab to do anything within the hyperlinks section of the inspector.
Let's I want to change the color of how a button behaves (rollover, click etc), I click on that element (text, box, anything), I select Inspector, I go to hyperlink tab, and the FORMAT subtab is not working.
Has anyone else had this issue?
What do i need to do??
I'm totally frustrated.
Thanks

Hello Old Toad,
Thanks for your response, but believe me, i've tried EVERYTHING.
I've selected Text, I've highlighted the text, I've gone to the INSPECTOR window, selected the hyperlink tab, and the FORMAT TAB always remains INACTIVE: i.e. all the buttons are dark grey and do nothing when I press them.
I paid for this software upgrade also (iLife 11).
I really like iWeb actually, it produces what I want, except this formatting of URLs (and perhaps sub-menus).
Im getting really desperate to find why my FORMAT of hyperlinks is not working.
Thanks

Similar Messages

Iweb hyperlinks some not working

My website has been up and running for over a month now without any problems. I recently added two pages, and now suddenly some links throughout the whole website don't work. There's no apparent rhyme or reason for the ones not working. The problem links are not on the new pages. On some pages, two links will be working, two will not be. Some of the links not working are email links, some are external page links. All of the links not working are links that worked just a couple of days ago.
I use my own navigation bar, instead of the default, and I hide the navigation bar on all pages. I have used blank text boxes on some of the links, but not necessarily the ones giving me problems. I can't figure out the pattern to which links are not working.
The website is dentonquiltguild.org
I have tried republishing the entire site, to no avail.
Any suggestions would be greatly appreciated!
Thanks.

Your navigation is covering some of your links. You should send the image to the back & or crop it to just the red box.
How I create navigation menus:
http://jeffnitschke.com/Video.html

My hyperlink is not working in the site I just published in Muse

My hyperlink just works on the computer where I published my site from a Macbook Pro 10.6.8 IOS, in Firefox 19.0, please help! I have imported it into Dream Weaver CS6, but still canno pinpoint the problem, it looks and behaves the same. The site page that I published is http://www.shamarihairsalon.com/contactappointments.html. When clients click on make an appointment at Flakes Mill Location the link expires
Message was edited by: Laquacer Daniel

Vinayak,
Thanks for your response as you were the only one to respond, however this site was redone in Muse, and worked in the previous site (which was not created in Muse) whether the user login or not. The only one who has sign-in capability is the owner of the account the, hence the salon owner. Her clients had been using the site before to make appointments...the link recently stopped working after it was published. Is their anyway around this? such as altering the way Muse create hyperlinks? Could an anchor be used instead,? How would that work? Just grasping for straws and want eliminate possibilities.
Thanks,
Laquacer
Re: My hyperlink is not working in the site I just published in Muse
created by Vinayak_Gupta in Adobe Muse Bugs - View the full discussion
The link https://appointment.bizlinkms.com/?page=appt is to an external site that probably requires a login first in order to access it (and hence the session error). You are able to access that page from a particular machine as you are most likely logged into that site already and hence the cookie exists in your browser that is maintaining the session.
On a quick look, the site's login page appears to be https://system.bizlinkms.com/
Nothing to do with Muse though.
Thanks,
Vinayak
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5113021#5113021
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5113021#5113021
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5113021#5113021. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Muse Bugs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Hyperlinks are not working in Interactive PDF in InDesign CS5

Hi, I have a book that I previously in CS4 exported as interactive pdf, with Hyperlinks and buttons. Now in CS5 When I export it as Interactive PDF, the Hyperlinks don't function anymore (there are hyperlinks in the TOC to link to specific pages in the book) - if I export as Print PDf the hyperlinks funtion well, but the buttons no longer function (prev. Page, next page and so on) Any suggestions?

The process is as followed:
Insert a 'Text box'
Wrote Wesport in Text Box
Highlighted the word Wesport, right clicked and selected the hyperlink option
Selected the option to inset a website link
Pasted the whole link and pressed ok
The hyperlink then was shown in the document blue with an underline
Then selected the Adobe Printer through the Print option
The PDF was then created but hyperlinks did not work.
Hope thats is enough detail let me know if you need any more.

Hyperlinks are not working in my PDF?

I have created a document using publisher 2007 and it contants hyperlinks. Some of which are http:// and some are https://. When I have converted the finish document to a PDF not all of the hperlinks are working and it seems to be the https:// ones are not working. I have checked the links and they work fine in the publisher file.
Can anyone help me?

The process is as followed:
Insert a 'Text box'
Wrote Wesport in Text Box
Highlighted the word Wesport, right clicked and selected the hyperlink option
Selected the option to inset a website link
Pasted the whole link and pressed ok
The hyperlink then was shown in the document blue with an underline
Then selected the Adobe Printer through the Print option
The PDF was then created but hyperlinks did not work.
Hope thats is enough detail let me know if you need any more.

Hyperlinks are not working in muse site

My hyperlinks are not working towards the top of my site but they work towards the bottom of my site. I have everything below the headers so I really do not know whats going on here?? Can someone please help!!

The process is as followed:
Insert a 'Text box'
Wrote Wesport in Text Box
Highlighted the word Wesport, right clicked and selected the hyperlink option
Selected the option to inset a website link
Pasted the whole link and pressed ok
The hyperlink then was shown in the document blue with an underline
Then selected the Adobe Printer through the Print option
The PDF was then created but hyperlinks did not work.
Hope thats is enough detail let me know if you need any more.

Hyperlink is not working when running on sun solaris OS

Hi,
I have Created PDF file using oracle reports 2.5 version and included hyperlinks in reports which will open files located on our intranet server(http://cup2.ngc.co.uk). Hyperlinks are working properly when I generated report on window xp machine but not working when I compiled and executed report on solaris unix server(reports 6i).
please let me know why hyperlinks is not working when executed on solaris((5.8). do we need any setup to work hyperlinks on unix server.
Thanks in advance,

Ok, there are 2 docs i've tried.
A = Doc created originally from MPB Pages with hyperlink
B = Doc created from iPad Pages with hyperlink
A was transfered to iPad Pages using iTune. I emailed A as pdf from iPad to gmail and reopen the file on iPad using Quickoffice / PDF Reader Lite, the link is NOT active, not working. BUT, when i read A using MBP gmail, the link is ACTIVE, i click on the link and it brings me to the correct webpage.
As for B, after the page was created with links on iPad, i emailed B as pdf from iPad to gmail, reopen the file on iPad using Quickoffice / PDF Reader Lite, the link is NOT active, and this time, when i read B using MBP gmail, the link is NOT active as well.
Weird huh? I'm starting to sense that is the problem with iPad Pages. What say you?

Short iWeb address does not work

My short iWeb address does not work. Everybody says that http://web.mac.com/username is all that is needed but I have to type in the full http://web.mac.com/username/iWeb/sitename.

Kriztykat,
Is it possible that you have not updated to iWeb 1.1.1 yet? The "Publish ALL to .Mac" menu item was made available after version 1.1, I believe. I would recommend that you update. However, if you don't want to update for whatever reason, you can get the "Publish All to .Mac" menu item to appear by holding down the "Option" key and selecting the same menu. You should see the "Publish to .Mac" item now becomes "Publish All to .Mac".
If you have found any of this information to be useful to you, please take the time to provide me with feedback by marking my reply as "solved" or "helpful" using those little buttons that you see in the title bar of this reply. I'd really appreciate it!

Hyperlinks are not working anymore in firefox for website, made with MS publisher. Real Drama!

Dear Service Employee,
I have made an website with MS Publisher.
It used to work PERFECTLY, better visual quality as IE, but ...the hyperlinks dont work anymore!
A real drama...for a business website.
Please check for yourself: www.assemblae.com
Funny thing is that the html-code for the hyperlinks is not changed.
DETAIL: the hyperlinks does not work in text blocks.
If you could help me...
Anton Nijkamp
Assemblae

I noticed this problem only with the debugger version of flash player 10
So, if you have this version installed (debugger version) you will encounter this problem.
Version:
10,0,22,87

Hyperlinked textbox not working on 1 device.

I am creating a series of pdfs that contain hyperlinks to relevant documentation for use on a tablet PC (windows 7) at our construction sites. Everything works great until I access the files on the tablet itself. Then the links simply will not open. The tablet is recognising the hyperlink is present (it highlights when you click it).
I created these pdfs in Word with a series textbox objects hyperlinked to important documentation (also pdfs) and so far it has worked wonderfully on all desktops I've tested it on but it does not work on our tablet PCs that they will primarily be referenced.
I have disabled all security options and allowed trusting of all links. My testing has revealed that if I attach the hyperlink to the text itself rather than the testbox, it opens the documentation fine. However, I have around 200-300 of these documents each with between 4-20 hyperlinks that would need to be redone so that would be very time consuming and tedious.
In my testing I also established that the textbox hyperlinks do not work with web addresses either. I doubt that changes anything but additional information can't hurt...

I ensured that the links are relative links (as the files will be accessed off our company network) when I created them. Whenever any other computer in my ofice accesses them they work as intended.
In addition, whenever I manipulated a file to hyperlink off the text in the textbox rather than the box itself, move them onto the hard drive, and disconnect from the network, the links work as they would be intended (except this fix would require changing thousands of hyperlinks).
Whenever I do the same on a desktop on our company network (except use the original files that link off of the textbox), the files also work as intended.
In short, I have made sure the problem is not the relative links converting to hyperlinks (which I have dealt with before). I have identified that it is difference between what the hyperlink is attached to and whether or not it is a desktop or tablet. It does not work only when its a textbox link on the tablet. I am very confused...

Hyperlink is not working after publishing my site!

I can fully activate my newly added page on my iweb site with no problem. I created a button and hyperlinked it to the newly created page. After I publish my site, the new button is NOT clickable. I created a new photo gallery page. I already have 1 photo page so when I clicked on that page, at the very top I am seeing a clickable link that will lead me to my newly created page. THIS IS NOT HOW I HAVE IT SET UP THOUGH! I have a button on my home page that if clicked, it will take you right to the new page! I tested it and it works! I go and publish my site and all the sudden it does NOT work!!! Anybody have a clue why this is?

Turn on DB logging and see what the syntax is that CR tries to send to the Server. You can also enable crlogger ( search for this and you'll find a KBA on how to enable or DB logging component )
First guess is the Date format is wrong, typically is the cause. try removing the date from the SQL and see if that works. Then try to add the selection formula in CR Designer and look at the SQL being generated
Can be specific because you did not mention what DB you are using.
Don

IWeb SEO Tool not working

I've think I fully understand the procedure to add Meta tags and change the Titles for pages created by iWeb using the iWeb SEO Tool but it is just not working for me, can somebody help?
The site in question www.thepropertyphotoclinic.co.uk is an iWeb constructed site uploaded by FTP to a server (not MobileMe). As I understand it I publish this site to a folder on my Mac. I then access this (folder) site using the SEO Tool. I add tags, headers etc. At first I assumed you could then republish by the FTP from iWeb with the new tags in place. I now understand that you have to publish by FTP using the 'publish' button on the SEO Tools dialogue. This I have done, but the tags and titles do not appear on the published site (when I check 'view source' in Safari).
1. Why after taking about 10 minutes to publish via SEO Tools doea the site not appear with tags?
2. Do I take it that had this method worked for me, I would have to do this whole procedure EVERY time I make a change to the website? ie, publish to a folder, reapply the tags, re-upload? This would be impossible for one of my sites which changes daily and is about 300Mb, as it takes hours to upload.
Heeeelp!!

Your title tags are present in the HTML files and at the top of the browser window. Perhaps you didn't empty the browser cache and refresh the window when you viewed it?
You have to publish your site to a local folder to be able to add title tags, meta tags and meta descriptions whether you use iWeb SEO Tool or an editor. The advantage of the Tool is that it remembers the previously applied tags and, if you haven't added any pages or changed them significantly, refreshing them is a matter of moments.
Apart from adding tags, the other very important reason for publishing to a local folder is to optimize your files. This will result in pages that download around 50% faster in the browser and is particularly important for a business site.
Rage software's WebCrusher and Ton Brands Web Site Maestro will not only do this but also upload the changed files only....
http://www.iwebformusicians.com/SearchEngines/Optimize.html
When you add pages, hyperlinks or make significant changes to your site you should also refresh and upload the sitemap.xml and notify the search engines. Sitemap Automator takes all the work out of this time consuming task....
http://www.iwebformusicians.com/SearchEngines/Sitemap.html
There is a workflow that has to be repeated every time you publish. You can get a copy of the checklist by going to this page.....
http://www.iwebforbusiness.com/SEO/SEO-Book-Sample-Request.html
Although the optimizer applications will find and upload the changed files only, I also build larger sites - bigger than about 3Mb - in sections on separate domain files to make them easier to handle and update.....
http://www.iwebformusicians.com/WebMusic/SiteLayout.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

My Hyperlinks are not working

When I insert a hyperlink in iWeb it functionates perfectly in iWeb.
But when I publish it (Local folder) and than visit it via my browser, some links are not working.
Maybe good to know; the links are only between my own pages. And the site is not really online yet, just in a Local Folder...
Only one of the links is not working, because when I click on another link, I get this:
file:///Users/timothydeleeuw/AsiaHolland/Websites/vd%20Watering/Watering_Fr/Bien venue.html
But on the not functioning link, I get this:
http://Watering_NL/Welkom.html
In the adressbar off course.
Thank you for your help!

My site is not online yet, that's why the link doesn't work, I saved it Locally.
I wanted to point out the differnce between the first and second link. In the first link it goes to a folder of my mac, and the second one is trying to get to a site that doesn't exsist. But in iWeb, I did exactly the same...
Some weird stuff going on...
thanks any way for your reply.

FPM Message Manager message's HyperLink does not work in Table

Hi FPM experts,
I use FPM in my application and I want to use FPM Message Manager with hyperlink pointing to cells with errors in a table with report_bapiret2_message. The hyperlink does work when pointing on stand alone input field, but it does not work when pointing on a input field in a table.
Here is a piece of my code. What's wrong?
data is_message type bapiret2.
is_message-type = 'E'.
is_message-id = 'TEST'.
is_message-number = '1'.
wd_comp_controller->mr_fpm_message_manager->
   report_bapiret2_message( is_bapiret2 = is_message
                                         io_component = wd_comp_controller
                                         io_element = lo_el_table_elements " point on the element in my context
                                         iv_attribute_name = 'VALUE' ). " Name of my attribute in context
Thanks
Davy
Edited by: Davy Veilleux on Jan 4, 2009 4:19 PM

Any answers to this question?
I am facing the same issue. Using FPM Message Manager with the io_element and iv_attribute parameters pointing to an element in an context node having cardinality = "0...n" does not show the hyper link.
Any Help is Appreciated.

-wap-input-format not working properly in Nokia 58...

I didn't know where to report this bug, so I'll try here.
When you create web pages for mobile use you can set various input formats in form elements.
This helps the user by setting up and validating input even before it reaches the server.
One of these is the "-wap-input-format".
I recently ran into a problem with at page that I couln't access from my Nokia 5800 and I decided to figure out why.
The page has an input field like this:
<input name="somenumber" type="text" style='-wap-input-format: "10N"' />
(Which basically tells the phone that in this field you can only enter 10 digits.)
However, even when I enter exactly 10 digits, the field turns red, and the phone refuses to continue until I "correct my error". The only input that the phone will allow is an empty field.
However... if the field is made like this:
<input name="somenumber" type="text" style='-wap-input-format: "NNNNNNNNNN"'/>
everything works just as it should.
But... the first type is also correct according to standards and should work too.
My phone has the V21.0.025 firmware. (and no new updates available yet for this product code.)
Does anyone know where this bug can be reported, or if its fixed in newer firmware?

The solution is NOT changing the webpage. The page already follows the correct standard!
It its the browser in the XM5800 that has a problem. My example clearly shows this. The phone acts inconsistent depending on the syntax in the wap inputfield. Both of the above syntaxes are supposed to give the same result. But one works, and the other, which is probably the one most often used, does not work at all.
Right now I use the Opera browser instead to access that page.(Because Opera does not have this bug.)
My post was simply an attempt to notify Nokia of this problem... Because I can't find any place to report bugs.
And at the same time ask users who have the newer version of the firmware, if they know if this problem still exists.
Message Edited by Timod on 08-Nov-2009 09:04 PM

Iweb Hyperlink Format not working!

Similar Messages

Maybe you are looking for