IWeb hyperlinks not coming out right when published

Hiya,
Has anyone got any idea why hyperlinks (to other of my pages) on some of my web pages come out as a blue square with a question mark in the middle, rather than the name of the link? If you click on it, it takes you to the right page, but you can't read what the link says. It means I can navigate around the site but no one else can!
Many thanks for any replies on how to fix...
Rose

I see what you mean. When that page is viewed in the Activity window there are a number of items that are using the following URL for their location:
archive:%20artsfiles/shapeimage_1_link0.png
with the resulting error message: Unsupported URL.
Those items that are correct have the following URL:
http://web.me.com/roseskelton/iWeb/Site/Archive%3A%20artsfiles/navbar_1normal.png
Are you using a text based hyperlink for those or an image? If an image how are you adding it to iWeb?
You may have to delete those items and create them again from the beginning.

Similar Messages

New 5.1 Speakers not coming out right with SB Live DE

I came to this forum after discovering that driver support is no longer available for "<font face="Verdana" size="3" color="#ff0000">Li've! Digital Entertainment 5."<font face="Verdana" size="3" color="#ff0000">?I just got a new 5. speaker set and plugged them in, with the brown/green/black cables going into the corresponding color-coded slots in the sound card. When testing, the center sound came out from the left-rear speakers as if the two were switched, while the right-rear speaker has no sound coming out. I bought the 5. speakers back to the shop and they tested them.. all fi've speakers were working fine, but the moment I brought them back the exact same?problem came up again. I'm now downloading the Li'veDriverUniPack from elsewhere, and will post here again after uninstalling and reinstalling the drivers.

The reinstall of the drivers failed to solve the problem. There is still no sound from the rear-right speaker and from the creative speaker test, sound from the center and rear left speakers are switched with each other.

IWeb Revisions not being carried over when published.

I've been trying to revise a few lines of copy on my site but everytime I publish the revisions, the old page appears. I went so far as to erase the site and rebuild the site and the pages - but the old site appears. I went up to my iDisk and clicked on the site and the proper site comes up.
What's up?
Thanks in advance.
MacBook Pro Mac OS X (10.4.9)

Most likely your browser is accessing the old pages that are saved in its cache.
Try resetting the cache in your browser. In addition when you try to go to that page with your browser try adding a question mark at the end of the address line, this should force your browser look for the page on the internet rather than in your own cache.
If you post your site address, others on this forum can look at your site and tell you what they are seeing.
Sincerely, David Phelps http://web.mac.com/phelpssculpture/iWeb/
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."
ibook & imac Mac OS X (10.4.9)

Color isnt coming out right when i print pictures

when i try to print a picture off my computer the color comes out way too light and almost white looking. how do i go about fixing it so it will look like the picture?

Please read this post then provide some details. What printer model? What operating system? What program are you printing from? Are you printing on plain paper or on photo media?
If you are using inkjet photo media make sure the proper media type is selected in the Paper/Quality tab of the driver. If using photo paper with plain paper selected the results would be very light.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Why does my project not turn out right when I export my movie?

I am creating projects for a church doing announcements via video. Once the project is created and my timeline complete, I export the project to my desktop. It often creates strange anomlies duplicating different parts of the project and replacing others. What is the issue here? Creating a Quicktime movie, 1920 X 1080P, 23.76 frames per second, H.264 Codec.

I'd first try exporting in the native exporting format ProRes 422. Personally I've never had this happen to me but I'd try that first.

Everyone Stop Worrying About The iPhone 5 It's Not Coming Out This Year!

Many have been saying, don't buy the Verizon iPhone 4 because in 6 months it will be outdated by the iPhone 5, this is completely false! Just because Apple has introduced a new iPhone every year doesn't mean it couldn't skip a year, I mean it's only happened 4 years in a row not 50. Think about it, Apple has a new product, the iPad, and with many other tablets trying to catch it, it is much more likely that this summer at the Apple Conference we will see an iPad 2 and a new software upgrade, iOS 4.5. Think about it the iPhone 4 has been the most successful iPhone to date and now they are introducing it to 93 million more people! I think they can survive a year without releasing a new iPhone. Also Apple mentioned that this iPhone didn't have 4G because of "current chip technology", do you really think they will have that all sorted out and ready to go in just 6 months?! No way! Apple cares too much about battery life, and their whole problem with 4G is that right now it uses too much battery life, so expect them to take another year to fix all that and test it out, remember AT&T doesn't even have a 4G network yet. The most you could expect is a price cut on the iPhone 4. However if by some miracle they do release a new iPhone this year it will not be what everybody is thinking, it will be like what the 3GS was to the 3G. It won't really add anything new at all, and your iPhone 4 will still be able to do everything that it can do. So don't be afraid, go buy the iPhone 4 February 10th, and 20 months later (October 2012) you can upgrade to the iPhone 4G, only 3 months after it will have come out.
Also I have been seeing threads of people saying that Verizon will get new iPhones in February and AT&T will get them during the summer before Verizon, this is also completely false, the only reason the iPhone is coming out right now is because Apple and Verizon wanted to make the iPhone available to it's customers as soon as possible, right when Apple's contract with AT&T was up. So this is just a special thing, after this new iPhone's will be released on both AT&T and Verizon at the same time during the summer.

primortal wrote:
joeymp wrote:
First of all, I think we can all agree that the home button isn't going anywhere (atleast on the iphone, the screen is too small for 4/5 finger gestures, plus you wouldn't be able to use the phone with one hand anymore), not only would that be the stupidest decision ever but every website that mentions it links it back to a site called BGR which claims they got "an exclusive tip"... sure. Also have you seen the code for the new iOS 4.3? It shows the devices: iPhone 3,3 iPhone 4,1 iPhone 4,2 iPad 2,1 iPad 2,2 and iPad 2,3 don't you think that means iPhone 3GS, iPhone 4 (GSM), iPhone 4 (CDMA), iPad 2 (GSM), iPad 2 (CDMA), and iPad 2 (WiFi)? Also look at the screenshot taken from the iPad, it shows that multitouch gestures are optional, how can they be optional if you lose the home button?
Anyway, even if I'm wrong about all of this, there is no point in waiting 6 months for the next iphone because it won't really be the "next" iphone it will just be a slight update like the 3GS was, and maybe not even that, and the iPhone 4 will be able to do everything that it can do, and the worse part is that you will not be able to upgrade to the "real" next iphone (2012) because you will have signed a new 2 YEAR contract! Atleast if you get the iPhone 4 on February 10th, you will be able to upgrade in 20 months (October 2012) only 3 months after the iPhone 2012 is released.
Granted removing the home button from the iPhone is a bit of a stretch but you never know with Apple. The versioning in the iOS is -1 of version of the actual hardware, iPhone 3,x (code) = iPhone 4 (hardware). iPhone 4,x (code) = iPhone 5 (hardware). If read in the engadget article it states, "two new-generation iPhones (4,1 and 4,2) and three iPads (2,1; 2,2; and 2,3)." That mean iPhone 5 and iPad 2 is coming to AT&T and Verizon
It's very plausible that it could be something like a 4GS but when Apple increments the version number by a whole number in the code it normally means a new hardware devices not an updated one.
I'm just scratching my head on why Verzion would announce the iPhone availability when the release of a new iPhone is going to happen in the matter of a few months. Why not just wait till July and announce the availability? Is it just greed or stupidity on Verizon/Apple part?
If the version of the iOS is -1 of the actual hardware, then why is the iPad 2: 2,1; 2,2; 2,3? Also, even if Apple is going to release a new iPhone in a matter of months, the reason they are releasing an iPhone 4 right now is because they wanted to start selling an iPhone on Verizon as soon as the AT&T contract was up. Why wait 6 months to make money when you can do it right now? This is also why Apple made sure that the contract they signed with Verizon was not exclusive, that way they could start selling to T-Mobile and Sprint whenever they wanted, they didn't want to make the same mistake they made with AT&T.

VFL Speaker sound from both the front speakers while FR sound is not coming out at all.

I have a creative gigaworks s750 connected to a xtreme gamer sound card. The system was working absolutely fine but now it has started behaving very strangely; system is playing back Front Left Speaker sound from both the front speakers while Front Right sound is not coming out at all. If i click the front right speaker in audio console speaker setup wizard, no sound comes. However when i click the front left speaker, sound comes out of both speakers. I counter checked it with playing 5.1 dts movie and muting all the speakers except the front left one from ac3 filter, sound came out of both the front speakers. However when i muted all the channel except the front right, no sound was coming out of front right speaker.
Message Edited by hussain on 06-10-2009 10:26 PM

Just want to add another relieved reader of this thread. I had lost the sound to my speakers even though I had sound to headphones. I was convinced it was a damaged headphone jack because I had pushed the headphone plug in harder the last evening when my wife complained that she could still hear the speakers while I listened with the headphones. The next morning--no speaker sound.
I spent a few hours searching the web to see how to disassemble a satellite A505 and get to the jack. But I wasn't even sure I could get a proper replacement jack that fit, and I was concerned that small damage, say to the ribbon connectors could render the computer useless--a large price to pay for just missing audio.
Fortunately, I stumbled onto this thread and I recalled I had put the unit to sleep the night before--something I don't usually do, but I didn't want all the Chrome web sites to have to reload so I just put it to sleep.
When I put it to sleep again and fired it up--Sound! I am so glad to find this solution so I just want to let people know it remains a viable option.
Doug

TS2097 I inserted a new DVD, it is working but not coming out. Whenever I try to eject it, it does not come out. Apple should provide us the easy and manual way to eject CD/DVD or?

Hello,
I inserted a new DVD in my mac book pro, its working and the drive is reading the dvd but unfortunately is not coming out. I have tried several ways mentioned on all over the net and apple community websites but nothing has worked so far.
I need a easier and manual way to eject the DVD. Where is apple's help?
Please help me. This is one of the weaknesses Apple should work on because it is causing us pain and loss of efficiency which is not apple's quality.
Thanks

Thanks for asking, actually I just found a trick on a website.
It siad that restart MBP while holding eject button, I did it and DVD came out right away.
I hope that this works out for everyone.
But still there is a need for a manual eject system so that people don't worry about stucking the DVD or CD in th drive.
Thanks anyway dear.

Ink not coming out from new cartridge

I purchased the color and black cartridge from HP store. After installation the black ink is not coming out. Tried and checked all software settings and it seems the cartridge have some problem. Contacted customer service but no help. Can any one help?
It is a 3515 deskjet all in one printer and printer head is not detachable.

Hi jkoley, and welcome to the HP Forums!
I see you are running into black ink issues. I would like to help.
I would recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend utilizing the steps in this document on Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

BPM Collect pattern is not coming out and it is in loop.

Hi Experts,
We have implemented a BPM Collect Time pattern and it was working fine in Dev and QA environments perfectly. Couple of days back we have some server issue in Dev environment and Basis team has done some thing with File Storage. From that time, all our BPM's were not working in Dev. It is showing that the block is waiting for some event to trigger and it is in Process state. We have set it for 5 min and block is not coming out from loop. We exported the code to QA and it is working in QA. We tried SWU3 transaction as given in the below forum and it didn't help us.
bpm collect time infinite loop error
Some one please help us.
Thanks
Venkat
Edited by: Venkata Gupta on Nov 27, 2008 12:54 AM

Hi
Is Your BPM having deadline branch ?
If there is any system Exception then catch it.
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm.
According to thread mentioned by you ,Schedule your Missed Deadline Branch.
Also check your BPM using transaction SXMB_MONI_BPE and find out which step have error.

Laptop is not coming out from hibernating

regardings,my laptop is not coming out from hibernation. it is showing that is is going to hibernate but stuck there.it is showing that it is working. i wait for an hour but result is tha same. then i tried to restart but same result. can u help me in this metter

It's hard to say what the problem is. One recomendation would be to drop usage of the database connectivity toolkit as it adds a lot of complexity and limits your options for troubleshooting problems. There is an alternative here. Read the discussion and download the drivers...
Also, what kind of database are you connecting to?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

My sim is stuck in simtray and simtray is not coming out.What should i do?

My sim is stuck in sim tray and it is not coming out.What should i do?

There are instructions on this page for getting the sim tray out : http://support.apple.com/kb/HT4577 . Does that not work ?

Hot spots not working in IE when publishing HTML5

Hot spots not working in IE when publishing HTML5. When user points on correct hotspot, the negative feedback is given. This happens only in latest version 8.0.1.

Hello ,
Welcome to Adobe Forums !
I am also able to reproduce the issue on Internet Explorer 10.
Could you please reply with the exact version of Internet Explorer you are using?
Regards
Himanshu

Why are certain channels not coming out of the master when they are playing?

the sound isnt coming out of the speakers, headphones or not and the bar which shows when its playing, moves in time with what should be playing. why wont it play outloud?

What is your product number?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Sound not coming out for right headphone

If I press the headphone jack backwards, I can get sound coming out of both earpieces. However, if I just let it stand still, I can only hear it coming out of the left side. I tried different headphones, so it's the iPod and not the headphones.
My warranty expired 2 days ago (naturally) and I want to know if there's anyway to manually fix this. Or if it's possible to visit an Apple store to fix it.

1) Plug your headphones into another source, such as
a stereo. Does the problem still exist? If not, then
it is the iPod itself and not the headphones. If it
does still exist, then it is your headphones.
2) If under warranty, Apple will ship you a new set
of headphones for no charge as long as you return the
defective part in the envelope provided with the new
part they send you.
Oh gee, that's useful. So what's the fix if it's not the headphones?
I guess it's off to the apple store for me!
Does anyone else notice that all of us have no sound in right ear? Could it be an intrinsic flaw?

IWeb hyperlinks not coming out right when published

Similar Messages

Maybe you are looking for