IWeb + iDisk = "only one" passworded site?

Of course, it's not "only one" since you can have as many p-worded sites as you want, but apparently if you use your iDisk, the addressing for the sites during authentication is identical so you're always logging into "idisk.mac.com." Is this why Firefox won't remember the passwords between different sites—because each new site requires a different password but there's nothing to differentiate the different sites during the authentication?
(Hope that made sense)
Getting kind of annoying have to re-enter my username and password anytime I bounce to a different site on my iDisk...

Akdream wrote:
usually people set different passwords for different sites thus you have to put it in each time changing from one site to another...
That's what I mean (sorry if my first post was confusing). I'd like to be able to "remember password" for each site, but since they're all linked to "idisk.mac.com" and not something more unique (like "/site1" and "/site2"), if I save password #2, it overwrites password #1, forcing me to re-enter pword #1 the next time I visit site #1. Can this be avoided? Or are you basically forced to use only one username and password if you want to check "remember" and not have to manually enter it each time?

Similar Messages

The kerberos PAC verification failure when all users of only one RODC Site, trying to get access iis webpage of different site using Integrated Windows Authentication

The kerberos PAC verification failure when all users of only one Site which having only one RODC server(A), trying to get access iis webpage of different site which having WDC server(B) using Integrated Windows Authentication. But when they accessing the
website using IP address, it is not asking for credentials as I think it is using NTLM Authentication at that time which is less secure than Kerberos.
Note that:- All user accounts and Computers of the RODC has been allowed cache password on the RODC. Nearest WDC for the RODC (A) is the WDC (B).
The website is hosted on a windows server 2003 R2 and generating below system event log for those users of the RODC site :-
Event Type: Error
Event Source: Kerberos
Event Category: None
Event ID: 7
Date:
<var style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">date</var>
Time:
<var style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">time</var>
User: N/A
Computer:
<var style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">computer_name (the 2003 server)</var>
Description: The kerberos subsystem encountered a PAC verification failure. This indicates that the PAC from the client<var style="color:#333333;font-family:'Segoe
UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">computer_name</var> in realm <var
style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">realm_name</var> had
a PAC which failed to verify or was modified. Contact your system administrator.
This issue has been raised for last one week. Before that everything was fine. No Group Policy changed, Time also same.
In this situation do I need to do Demotion of the RODC and re-promote it as RODC again or is there any other troubleshooting to resolve it.
Thanks in Advanced
Souvik

Hi Amy,
Thanks for your response
I noticed that Logon server could become incorrect again after user re-login or restart of a workstation.
It seems root cause is different. Need a permanent solution.
The Workstations of the RODC site are getting IP from a DHCP server by automatic distribution of IP from a specific subnet for the site only. The RODC is
the Primary DNS server for the site.
I have checked the subnet and it is properly bound with only with that AD site. The group of users and workstations are in the same site AD organisational Unit.
Sometime I restarted the NET LOGON service and DNS server service on ther RODC server and sometime rebooted the server. But the Logon server issue has not fixed permanently.
The internal network bandwidth of the site is better than the bandwidth to communicate with other site.
The server is Windows server 2008 R2 standard and hosting the below roles
RODC
DNS
File server
The server performance is Healthy in core times when maximum users usually logins.
Any further support would be much appreciated Amy
Thanks
Souvik

Flash not displaying correctly for only one web site

In the last 3 or 4 days I seem to have problems with the flash content of one single web site not displaying correctly from my laptop. I have the same problem from both IE (version7.0.5730.11) and from FF (3.5.8). The site works fine from my desktop system so it's not the site specifically. The site (www.transparent.com/wotd/today/spanish.htm) has an embeded flash segment that does not display correctly and thus I can't click on two of the embedded buttons. It also does not display the background pattern for the flash. I'm running flash 10.0.45.2 based upon right clicking from within the embedded flash which takes me to the Adobe page with my version info. The Adobe page seems to display fine.
As far as I know I'm not having problems with another instance of flash - only this site.
Any thoughts on how to diagnose the problem? I've not added any new programs since this website stopped working but do have some background "tune up" programs that run. I'm assuming some settings are out of wack but don't know where to start looking. Any help folks woulc provide would be appreicated.

Well, that is hard to tell. Like I said the website may have updated their technology. Just because it works with the Desktop, doesn't mean there is not a reason that the laptop might not have a problem. You have 2 different systems and
most likely different configurations.
You may want to check Tools and in the add ons for both, look for Shockwave Flash Object...ActiveX Control..Flash10e.ocx should be installed and enabled.
Also for each check C:\Windows\System32\Macromed\Flash Right click the Flash folder and make sure for IE that the files are vs 10.0.45.2 by checking the properties.
If you have the correct Flash files and the correct SWO then, some other cause would be looked at.
It has been my experience to not "assume", but verify:-)
Thanks,
eidnolb

Get 'server not found' for only one web site, works on other computers

This is a secure site for which I have an account to do business. Get same results in Explorer and on my windows smartphone. Checked and it is not a restricted site in security options.

You're welcome.
I got redirected to that page when I went to http://www.primericaonline.com<br />
They may have changed that recently if it worked in the past.

HT204053 How do I combine my Apple ID with my iCloud ID so I only have one password for both?

How do I combine my (accounts) with Apple ID with my iCloud ID so I only have one password for both? I am using the same email address for both but want only one password for both...

You can't "combine" Apple ID's.

List article in only one site

Hi gurus,
Can somone advise or suggest us in defining a new one or a standard sap listing procedure where it should be listed to only one specific site.
example article X in article master should be listed only in one site b001 upon executing listing procedure in MM42.
Any ideas or suggestions gurus,
Thanks in advance,
Regards,
Gopio.
Edited by: Naga Gopathi on Mar 17, 2010 9:04 PM

Hi Kumar,
Thanks for the reply, Actually our requirement is when we are in MM41 creation of article and user clicks the button EXECUTE LISTING, system should list the given article in only one site.
I have created a local assortment and maintained the site in assortment user, now when i execute listing in mm41, system is listing article in each site we have.
If this information is enough or please advise me if you need more information.
The listing procedures i have tried was B1 and maintained same in site master data and assortment.
We want to achieve this in single t-code while creating the article?
Hope this helps and any suggestions or ideas,
Thank you,
REgards,
Gopio.

I am getting an invalid certificate notice when going to one web site only, that formerly was not a problem. Happens with Safari and Google Chrome. Any ideas?

I am getting an invalid certificate notice when going to only one web site, that previously was OK. Happens with both Safari and Google Chrome. Would emptying the system cache fix the problem?

Well, it seems weird & it has no email listed, you might try contacting them to see...
[email protected]

Am I the only one without problems?

I realize this is a support forum, and as such, most people come here looking for help because of some sort of problem. I usually read support forums looking for potential pitfalls that maybe I can avoid by reading others experiences.
Having read all the horror stories, I was expecting all kinds of trouble after installing the new iLife '08. But to my surprise, my existing domain upgraded without a hitch, I made massive changes to my site and it published without even a hicup. And I have made severaly twiks to my site and it has published the changes without one single problem.
I know this does nothing to help those that are having all kinds of nightmares, but I just want to say that there must be others that are having great success with this update.

Hi Gordon,
I am a .mac member. My iWeb 6 site upgraded to iWeb 8 with no problems.
I wasn't asked to find my domain file. iWeb didn't crash, either on the updating of the domain file or on publishing the site once I made a couple of little tweaks. I still have all my comments in my blog. All my photo album pages still have all their photos.
I used only the templates that came with iWeb. My one domain.sites file was in the default location (I did not change the location) The photos in my albums came from iPhoto and from folders not in iPhoto.
My site isn't too large. I have a Welcome, My Albums (12 albums), My Movies (7 movies) and a blog page.
I hope more people post who didn't have any problems. Reading this forum the past week or so, I was scared to even open iWeb 8. Since I had several backups of my domain file, I figured I try and see what happens. It went without a hitch (cross my fingers)

I am having a hard time with my Apple ID why can't I just select one password and it works for all my "Apple" appliances?

Why can't I used only one password to log in on my Apple computer, IPad ,ITunes and IPod. I've tried to log in and I get a wrong password and after two times trying I need to reset my password and it's gets confusing for me, plz if anyone can assist me I'll be thankful I'm new to Apple and it's great but at times I get confused.......Thank You, Asan

You can of course use the same Apple ID on all your Apple devices. But, each time you're resetting your ID, you're causing yourself a 90 day issue. At this point, contact Apple for assistance. If you're in the US, you can call 1-800-MYAPPLE

*** Publishing only one iweb site to .mac

I have a number of different sites creates in iWed that I normally upload to my own server and NOT my .mac account. I would like to clear my .mac space to 0 and then upload 1 of my entire movies there. I'd like to create the backdrop in iweb and publish this entire movie to my .mac account but I know that if I just go file>publish to .mac, that all my pages will upload to .mac.
Is there a manual way to control this? Ideally I'm hoping it's possible within iweb, but I'm guessing it's not. If it's not, will it work if I publish my pages to a folder, and then select my movie .html and files folder and manually drop them into my idisk/movies folder? Will that then publish only my movie site to my .mac account?
I'm not at the office today, so I'm just wondering if someone can give me a heads up if this may work. I'm trying to research in advance!
Thanks everyone!

Hi
Your iWeb sites are contained in a domain.sites file, which lives here:
User/Library/Application Support/iWeb/domain.sites
To separate sites, you need to have seperate domain files. You can do this by simply creating a second User Account on your Mac and creating the website there, and then use Publish to .mac.
Or you can swap out the domain files manually or use something like Domains Juggler, from Cyclosaurus.
There is some more info. on the How2 page of my site, www.willg4pb.com.
Will
1GHz G4, 15" PowerBook, Airport Extreme & Express, 1G iPod Mini Mac OS X (10.4.6) Please help others by marking questions as Answered (+perhaps Solved or Helpful)

TS1544 Keychain will NOT let me reset. It will not let me get my email and keeps asking me for my password. I only have one password and it won't take it. I HATE THIS. It has made my wonderful MAC and expensive item that just sits on desk. PLEASE fix

I can't get on line with out some keychain request for a password but it will not accept the one password I have. I really hate this. I have tried to unlock the local items but it want's a password and it will not take my password... PLEASE PLEASE genious MAC people fix this. I loved my MAC until i downloaded OS X maverics and now i am wanting a PC.....

If your computer was purchased less than 90 days ago, you are entitled to free telephone support from Apple. The period is longer if you purchased Apple Care and extended your warranty.
Apple Support Contact
Apple Support contact - Telephone
What OS are your running? If you can access your user library, you can go to Keychains/login.keychain and move it to your desktop. Restart and a new login keychain should be created. If successful, delete the one from your desktop.

HT2506 After updating my system to Mountain Lion 10.8.2 I can no longer view videos on Facebook or other sites. The only one I can view videos on is youtube. I have downloaded Adobe Flash player and still no luck. I cannot even open Preview on my computer

After updating my system to Mountain Lion 10.8.2 I can no longer view videos on Facebook or other sites. The only one I can view videos on is youtube. I have downloaded Adobe Flash player and still no luck. I cannot even open Preview on my computer anymore. Any ideas would be helpful thanks

Merely clicking the Preview icon in the Dock doesn't cause it to open anything, unless you had one or more windows open the last time it quit.
If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test.
1. If you're getting a "blocked plug-in" error, triple-click the line below to select it:
/Library/Internet Plug-Ins Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu. A folder should open. If there is more than one item in the folder with the words "Flash Player" (not "flashplayer") in the name, open the respective Info windows, check the version numbers, and delete all except the latest. You may be prompted for your login password. If you get the same error after doing that, re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
2. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
3. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
4. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.

IWeb hyperlinks working on only one page

Hi,
I'm building a website with iWeb - www.dariusenakim.nl
It's in Dutch so the words won't mean anything to you but it's a fairly simply product with just four pages in total:
Home, Work, About Us, Contact
When you go to the site you arrive at Home (I did not make it so, this was default. I guess it recognized the Home.html? - another question) and all the hyperlinks at the top work. However whenever you click on one you go to the directed page but there the exact same hyperlinks are not recognized as hyperlinks any more. It's the exact same lay-out for all pages but only one of four is working!
Can anyone help me solve this problem? I've already tried moving the images up or down (the whole header-layer discussion) but it doesn't make any difference and the lay-out as it is seems to be working flawlessly on the first page (home), so why not on the others? I've also tried not using links to internal pages but external links to the actual website address but no difference: only the first page is working.
The really strange thing is that I have an alternative Home page set up: www.dariusenakim.nl/Home_Alt.html
This was just a test to see if we wanted another lay-out but we didn't go for it. However on this page the hyperlinks are also working!!
Please advice. Thanks in advance.
ps. iWeb 3.0.4 (304) developped in 2011

Hi Wyodor,
If that was the case why would the exact same lay-out work on the first 2 pages but not on the others? Does the body layer alter its size randomly so that sometimes the images are in the wrong layer and sometimes not? Even with duplicating the exact same page?
Will try later tonight anyway but like I said: it doesn't make any sense it's 4 times the same page with just different content beneath it...

This only happens on one bank site I use.. It stored my ID and I don't want it stored. This only happens on this one bank site... How do I make it stop?

This only happens on one of the bank sites I access, the others are fine. It automatically remembers my sign on ID... I don't want that to happen. How do I disable that on this one bank site?

See this to learn how to delete that password. <br />
https://support.mozilla.com/en-US/kb/make-firefox-remember-usernames-and-passwords#w_viewing-and-deleting-passwords

Posting only one site

I'd like to post only one of my sites using Iweb. When I publish to a folder, Iweb automatically publishes all my sites to the folder. How do I publish to a folder with just one site.
Thanks for your help.
Dean
powermac G5 Mac OS X (10.4.8)

Hi Dean,
Easily done.
Just separate your sites into individual Domain files, and you can edit and publish them one at a time.
You can do this manually using a folder structure by following these directions, or you can download, for free, iWebsites, a handy little application which can automate the process for you.
If you encounter difficulties, post back and we'll help you out.
Mark

IWeb + iDisk = "only one" passworded site?

Similar Messages

Maybe you are looking for