IWeb Images and Assets Switched Around After Publishing to MobileMe

Hello,
A few days ago a podcast I am hosting started acting odd. If I add a new graphic element to the site, ALL graphic elements get moved around, stretched, rotated, etc.
This DOESN'T happen when I publish to a folder.
I managed to do some workarounds so that the site looks "useable" but all of my borders and colors are moved around. After digging through, I managed to find what goes wrong.
Here is a screenshot of the homepage published to disk: http://imgur.com/p35EZ.png
and here it is published to mobileme: http://web.me.com/ksnowsb108/PhuketSpring_Podcasts/Main_Page/MainPage.html
You can see its not so bad because I tweaked it a lot, but if I so much as add anything, ALL of the photos get rotated around, I get a red arrow instead of the top left building photo, etc.
As I said earlier, I found the problem, but I can't fix it yet. For some reason, when publishing to mobileme the "shapeimage_#.png" files get out of sync. Here is what I mean: http://imgur.com/xcCpP.png
As you can see, shapeimage_7.png corresponds to a red arrow when published to disk, however it shows up as the blue arrow in mobileme. So right now it's not fatal, but one more shift and then the yellow text box will appear instead of the arrow, etc.
Please please please tell me you have a solution! This podcast gets around 5,000 hits daily and it's embarrassing! I know I should not use iWeb for these things but it was a dire emergency.
I have tried going into Sites folder and deleting/reuploading, deleting cache, and preferences. Does anyone know what the problem could be?
Thank you very, very much!

It CAN be site destroying. The only way I've found to fix it myself is to delete and recreate the page. But that is time consuming and if you do that, you have to then remember to clear your cache or you REALLY get a jumbled mess. But doesn't that then mean that visitors to your site get the same jumble unless they too remember or know how to clear their own cache? Even that doesn't fix the original problem though. And yes, it sounds like we are experiencing the same thing. Seems like others should be as well... do you update the site a lot too? Maybe people don't update as much as we do and don't see it...? Very frustrating and I hope they find an answer...

Similar Messages

I have iWeb '08 and just switched from Mobileme to GoDaddy and using Filezilla. Now when I make changes through iWeb it doesn't actually publish to my desktop folder. In fact, it doesn't publish at all but says that it did.

I have iWeb '08 and just switched from Mobileme to GoDaddy and using Filezilla. I also just upgraded to Lion. Now when I make changes through iWeb it doesn't actually publish to my desktop folder. In fact, it doesn't publish at all but says that it did. How can I make changes in iWeb and publish to a folder?

Choose the destination in the publish settings page as shown in the second example on this page...
http://www.iwebformusicians.com/iWeb/Publish-Website.html

IWeb images and nav menu not displaying in IE

Hi all,
I've just created my second IWeb page: http://web.mac.com/benbruder/iWeb/Ben%20and%20CC%27s%20Garden/Welcome.html
It displays fine on my MacBook Pro, and loads fine on a PC, but when the page finishes loading, the images and navigation menu both disappear.
Any thoughts?
Thanks much,
Ben

Just figured it out from reading the other posts--having an apostrophe in the title killed the page. When I took the apostrophe out, everything worked.
--Ben

Opening I Photo images and Apple works drawings, after installing time mach

I cant open documents and images compiled using apple works, after I installed my new 27inch 3.06 ghz intel core 2 duo OS10.6.2
all my file ikons are there but are white, I finished a dwing in my existing and prefered apple works drawing program saved it to the desk top but it apeared to be giberish when I opened it WOT TO Do?Help!!!!!!

Boot in safe mode.* This will cause certain caches maintained by the system to be rebuilt. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot than normal.
When the login screen appears, reboot as usual (not in safe mode) and test. There's no need to log in while in safe mode.

Images and video not loading after bridge

Hi guys. I followed this guide to put the NVG589 into bridge/passthough mode so I can use my Netgear N600 WNDR3700v2 router. Everything seems to be working fine, except with Facebook, Youtube and a few other sites. Images and video take forever to load (if at all). Everything I have read online suggests either changing to the Google DNS or turning IPv6 off. I am already using Google DNS and I already had IPv6 turned off on the Netgear. I have now turned IPv6 off in the NVG589 as well, yet the problem persists. As we have 30 days to test run AT&T interent, I still have my cable interent active (Suddenlink), so I can plug in the cable modem (SB6121), and everthing loads quickly on Facebook and Youtube. I plug in the NVG589, still not loading...so it's defintley something to do with the settings in the NVG589. Any idea? Thanks in advance.

Hi ,
I am sorry about the issues you are having with your U-verse service loading certain sites, but I will be glad to help. Are you having issues when it is not in bridge mode? Try resetting the U-verse gateway, and just connecting your Netgear to see if you are having the same problem. If so, try doing a direct connection to the gateway without the Netgear to see if the problem still persists.
Let us know how it goes.
-David T

Schedule Updates offline Image and updates in softwarecenter after rollout

Hello,
we have a strange issue here.
For Example: I did an offline update of our os image for server 2012 R2 with the KB2919355 update.
The Distribution Points are successfully updated with the new image.
The OfflineServicingMgr.log says everything went fine.
After staging or installing a server from the wim-file the update is listed under "Programs and Features\Installed Updates" as installed.
But after doing an inventory and a software scan against the SCCM Server the update is displayed as necessary in the softwarecenter.
Does someones know for what reason this happens or where i can take a look ?
Is ist just a display problem ?
Best Regards,
Marcus
Marcus Lehmann

Ok, this is the output of the QMI Query for which Torsten asked:
Article,Bulletin,ExcludeForStateReporting,Language,ProductID,RevisionNumber,ScanTime,Sources,SourceType,SourceUniqueId,SourceVersion,Status,Title,UniqueId,UpdateClassification
2919355,MS14-018,False,,0fa1201d-4330-4fa8-8ae9-b877473b6441,207,20140629190907.000000+000,array[0..0],2,{1377AA04-B8C7-42DC-984D-E30258D54D39},84,Installed,Windows Server 2012 R2 Update (KB2919355),23b0e40c-52bc-4324-8945-e3cf52612356,0fa1201d-4330-4fa8-8ae9-b877473b6441
2919355,MS14-018,False,,0fa1201d-4330-4fa8-8ae9-b877473b6441,205,20140629190907.000000+000,array[0..0],2,{1377AA04-B8C7-42DC-984D-E30258D54D39},84,Missing,Windows Server 2012 R2 Update (KB2919355),37a15f2a-aa8e-47c7-a68b-4d962b97a6cc,0fa1201d-4330-4fa8-8ae9-b877473b6441
2919355,MS14-018,False,,0fa1201d-4330-4fa8-8ae9-b877473b6441,207,20140629190907.000000+000,array[0..0],2,{1377AA04-B8C7-42DC-984D-E30258D54D39},84,Missing,Windows Server 2012 R2 Update (KB2919355),8452bac0-bf53-4fbd-915d-499de08c338b,0fa1201d-4330-4fa8-8ae9-b877473b6441
2919355,MS14-018,False,,0fa1201d-4330-4fa8-8ae9-b877473b6441,207,20140629190907.000000+000,array[0..0],2,{1377AA04-B8C7-42DC-984D-E30258D54D39},84,Installed,Windows Server 2012 R2 Update (KB2919355),f992cb7e-e899-475d-89d0-aa6b020693e2,0fa1201d-4330-4fa8-8ae9-b877473b6441
2919355,MS14-018,False,,0fa1201d-4330-4fa8-8ae9-b877473b6441,207,20140629190907.000000+000,array[0..0],2,{1377AA04-B8C7-42DC-984D-E30258D54D39},84,Installed,Windows Server 2012 R2 Update (KB2919355),9b1e1093-722e-4701-9e38-4a4301954761,0fa1201d-4330-4fa8-8ae9-b877473b6441
2919355,MS14-018,False,,0fa1201d-4330-4fa8-8ae9-b877473b6441,207,20140629190907.000000+000,array[0..0],2,{1377AA04-B8C7-42DC-984D-E30258D54D39},84,Installed,Windows Server 2012 R2 Update (KB2919355),f681eb51-2a48-4510-a0bd-dcff3aa227b8,0fa1201d-4330-4fa8-8ae9-b877473b6441
2919355,MS14-018,False,,0fa1201d-4330-4fa8-8ae9-b877473b6441,207,20140629190907.000000+000,array[0..0],2,{1377AA04-B8C7-42DC-984D-E30258D54D39},84,Missing,Windows Server 2012 R2 Update (KB2919355),42132d43-9538-45c2-a096-8a899a5684bb,0fa1201d-4330-4fa8-8ae9-b877473b6441
Any explanation ??
Marcus Lehmann

Images and Tables jump around in text

I have a document with text and images. The image arrange settings are set to: Move withText - Above and Below.
But it doesn't seem to work correctly as you can see here:
How is this even possible? Clearly the image should be where the blue handle is, right? Is anything wrong with my settings?
I hope someone can help me. I really want to use Pages with iCloud.
Thanks!
Seb

DW is not a WYSIWYG app. At best, Design view is a rough approximation of what you can expect to see in some older browsers. Live View is slightly better because it's based on a webkit browser engine. But even that has certain limitations.
Previewing in all major browsers often during development is the only way to know if your design is holding up.
When things go wrong, validate code and fix reported errors. 98% of browser rendering issues are code related.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.

My ipod has just stop working and wont switch on after a full nights charge?

Did you already try to reset it by holding the sleep and home button until the Apple logo comes back again?
If this does not work, try to connect in recovery mode, shown here: http://support.apple.com/kb/HT1808

I'm trying to publish my iweb site and its taking forever to publish its been two hours and the moon is still on about 15%

I don't understand why this is happening, would i be able to close my laptop while I sleep would it ruin the upload of the site? This is very annoying. please can some one help me!

You & the whole world are trying to contact Apple's servers all at the same time.
Wait.

IWeb 3.0.4 problem under Lion X: Why are my movies unable to play after publishing web-site?

No problems with the above running Snow Leopard 10.6.8. Under Lion, I can place movies during the edit phase, set up quicktime to autoplay, and test it and it plays. After publishing the site, the movies do not play. Sometimes a note saying that "a plugin is not available" appears in the movie window. Could this be a Quicktime problem? The movies were placed in iWeb using iTunes from the Media Display and are .m4v files edited in iMovie. The web-site works on iMacs running 10.6.8, and on PC's. Any ideas? Thanks!

Thanks QTKirk. Tried the web site under firefox 5.0 and the movies played! Not sure about the DivX extension for Safari. There is something called 3ivx on my machine that has something to do with Mpeg. Could you give me the steps to remove this from Safari, assuming that it is the extension you were talking about? How would I see what extensions are in Safari? I'm labeling your response with the correct answer to my problem because either way --- I can always use firefox if I can't get Safari straightened out. Many thanks!

Photos disappear from Album and Photo webpages in iWeb after publishing.

I just installed iWeb 9. I made some great new photos albums and blogs and published. After 4 unsuccessful attempts and publishing errors, I finally got the new web pages published. When I go back into iWeb, the photos on the album page are gone. All the photos from the photos page are also gone! The Albums page, which had 10+ albums now has 1 space that says, "Drag album here."
The website shows the photos as I would expect. I thought this was a fluke, and started from scratch, recreated the pages, made sure my iWeb patches were up to date... Same thing... No photos in iWeb.
The Blog doesn't seem to have this problem. Only the Albums and Photos webpages.

Welcome to the Apple Discussions. Try the following:
1 - close iWeb.
2 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
3 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
4 - reboot.
5 - launch iWeb and try again.
OT

My iWeb image names are incompatible with FTP servers and must be renamed but I can't find the images in iWeb. I can upload to a desktop file and change them there but then I would need to download them to a new site in iWeb to publish them.

my iWeb image names are incompatible with FTP servers and must be renamed but I can't find the images in iWeb. I can upload to a desktop file and change them there but then I would need to download them to a new site in iWeb to publish them.
What's the answer?
Thanks

Many thanks to responded to my question and sorry not to get back sooner.
Yes, I discovered by this unfortunate experience that the names of photos are a serious issue if the site is to ever go to an FTP server. Apple should discuss this carefully in their "manual".
One more question: I uploaded the website to a folder on my desktop. When I open it, unlike the photos in iWeb, there are folders for each page which have all the photos in them. I went through each folder and changed the names to be FTP compatible. I'm using iWeb SEO Tool which allows one to upload from this local folder to an FTP server but having trouble.
Is this because there is an imbedment in iWeb that uses the old photo names to link to the actual photos and it can't find them because of the name changes?
Thanks again for your help ...
Phil McP

I'm using iweb 3.4 and trying to load audio files to my web page. everything looks good in iweb but after publishing instead of having a control bar i have a "?". does anyone know what to do?

I'm using iweb 3.4 and trying to load audio files to my web page. Everything looks good in iweb but after publishing instead of having a control bar i have a "?". Does anyone know what to do?

Where are you hosting the site, how are you uploading the files and what's the URL of your site so we can examine it first hand?
Adding audio files by dragging onto the web page forces the viewer to have Quicktime installed on their computer in order to be able to listen to them. Look at the audio player options on this page of Roddy's iWeb for Musicians site: Audio Players for your Music Website.
OT

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT

TS2167 I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

Where are you publishing to? Can you publish successfully to a folder on your hard drive? Have you read this webpage: Publish iWeb site using FTP. It may have a clue to where the problem is.
A quick troubleshooting fix is
Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
However, when you delete the preference file you probably will have to use the app described below to select and open your domain file with iWeb:
In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

IWeb Images and Assets Switched Around After Publishing to MobileMe

Similar Messages

Maybe you are looking for