IWeb integrated ftp won't connect. Settings confirmed via standard ftp client

I am nable to ftp via the iWeb integrated ftp interface. I have tested the settings via a standard ftp client without issue.
Any ideas?
Thanks! Joe

iWeb is kind of unusual in that it publishes a folder containing the website files and an external index.html that opens the home page. There's also a copy of this index.html file inside the folder.
This arrangement is to suit publishing to the Apple server - MobileMe - and is kind of illogical when publishing else where.
Uploading using the iWeb built in FTP means that the URL has the folder name in the path...
http://www.domain-name.com/Site-Name/Page-Name.html
To avoid this, the site needs to be published to a local folder using the second method on the page I referred to above and the files inside the folder uploaded to the root on the server....
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html

Similar Messages

Won't connect to ipad via Bluetooth

why won't my iPhone connect to my iPad via Bluetoot?

Well, I should have asked Pagancelt not sleeky as he said above he says he DID it.
I quote:
Re: iPad won't connect to iMac via bluetooth
Apr 29, 2012 3:35 PM (in response to mccass)
I was successful in connecting my iPad and 27" iMac via bluetooth for the purpose of internet sharing, so it can be done. I was able to use my iMac's free wifi connection (which the iPad couldn't pick up, as I don't want to stand by the window) to get internet on the iPad. I forget how, unfortunately, which is why I'm back in the forums - my connection went down!
*Edit: Foolish me. My iMac shows up under "Devices" on the iPad Bluetooth pane in General Settings. All I had to do was tap it to revive the connection (since I paired the devices the first time I set up the connection). iPad is now getting internet off iMac again :-)

Iphone won't connect to tomtom via bluetooth after ios 4.2 update

iphone 3GS won't connect to tomtom via bluetooth after ios 4.2 update. So no handsfree

This is exactly the same issue that happened to me I've contacted Telus my service provider and Apple and spent countless hours on the phone with both they seem to be blaming each other for the problem Apple says it's a network problem while Telus says it's a hardware problem this happened right after I updated to 4.2 myself need help here no support. Lovvvveeeee this phone but what the $&@!'

Dreamweaver ftp won't connect to host for one one site

HI,
have spent over 3 hours on this, and double checked
everything, even with ISP to make sure my host address is correct.
I can connect to the host address via other programs and ftp
I have the same settings in dreamweaver, but it won't
connect.
I can connect to other sites with this same dreamweaver, and
can create NEW connections too, but not to this one site that I can
connect to with everything else, but dreamweaver.
The is dreamweaver MX,
Can anyone help?

Adobe provides a test FTP server for these purposes. You can read about it here -
http://helpx.adobe.com/dreamweaver/kb/troubleshoot-ftp-issues-dreamweaver-cs5.html#main_Ve rify_FTP_access
Try setting up a connection to that server and see if you can connect.

FTP won't connect Get multiple daemons

I had the problem where no one could connect with any password in FTP. I replaced the /Library/FTPServer/Configuration/ftpaccess file and fixed the bad password problem.
For a few minutes I could connect. Now I cannot. When I try to connect I get:
++++
ftp server1
Connected to server1.<ourDomain>.com.
(Here long wait)
421 Service not available, remote server timed out. Connection closed
+++++
On the server itself I find instances of the daemon where I had tried to connect before:
++++++
admin$ ps -ax | grep xftp
411 ?? R 2:07.21 xftpd -a
440 ?? R 1:01.14 xftpd -a
441 ?? R 1:00.91 xftpd -a
463 ?? R 0:50.93 xftpd -a
477 ?? R 0:32.96 xftpd -a
478 ?? R 0:32.22 xftpd -a
481 ?? R 0:22.42 xftpd -a
482 ?? R 0:22.22 xftpd -a
491 ?? R 0:20.26 xftpd -a
494 ?? R 0:08.76 xftpd -a
495 ?? R 0:08.65 xftpd -a
510 p2 U+ 0:00.00 grep xftp
Any help would be appreciated.

In addition to this, When ever I try to connect, I start an Xftp daemon that EATS cpu time.
The SAMPLE data is below.
Thanks
Kirk
+++++++TOP+++++++++
Processes: 125 total, 5 running, 1 stuck, 119 sleeping... 390 threads 14:51:53
Load Avg: 2.50, 2.26, 1.78 CPU usage: 30.1% user, 69.9% sys, 0.0% idle
SharedLibs: num = 188, resident = 41.5M code, 4.63M data, 10.5M LinkEdit
MemRegions: num = 13841, resident = 313M + 17.5M private, 130M shared
PhysMem: 159M wired, 169M active, 389M inactive, 718M used, 1.30G free
VM: 7.11G + 107M 112124(0) pageins, 0(0) pageouts
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
28709 top 15.0% 0:02.16 1 19 22 488K 504K 936K 26.9M
28708 pop3d 0.0% 0:00.06 1 18 80 472K 2.20M 1.90M 48.7M
28707 imapd 0.0% 0:00.13 1 25 86 684K 2.71M 2.41M 49.4M
28596 xftpd 70.9% 5:20.61 1 17 30 200K 612K 672K 26.8M
28565 smtpd 0.0% 0:00.07 1 16 76 452K 1.57M 1.68M 29.3M
28557 imapd 0.0% 0:00.10 1 25 86 688K 2.71M 2.37M 49.4M
28490 trivial-re 0.0% 0:00.03 1 16 20 200K 568K 708K 26.7M
28361 imapd 0.0% 0:00.26 1 25 91 672K 2.83M 2.41M 49.7M
28360 imapd 0.0% 0:00.13 1 25 86 668K 2.72M 2.39M 49.4M
+++++++++++++Output+++++++
Analysis of sampling pid 28596 every 10.000000 milliseconds
Call graph:
849 Thread_011f
849 0x21c8
849 0x2320
849 0xca30
849 0x1ca7c
849 0x1c4f4
633 0x1b030
575 lstat
575 lstat
57 0x1b030
1 dyldstublstat
1 dyldstublstat
150 0x1b064
133 readlink
133 readlink
16 0x1b064
1 dyldstubreadlink
1 dyldstubreadlink
12 0x1b010
7 strcat
7 strcat
5 dyldstubstrcat
5 dyldstubstrcat
7 0x1af94
5 strchr
5 strchr
2 dyldstubstrchr
2 dyldstubstrchr
7 0x1afcc
4 strcpy
4 strcpy
3 dyldstubstrcpy
3 dyldstubstrcpy
6 0x1b0ec
4 strcpy
4 strcpy
2 dyldstubstrcpy
2 dyldstubstrcpy
5 0x1aeec
3 bcmp
3 bcmp
2 dyldstubmemcmp
2 dyldstubmemcmp
5 0x1b024
3 strcat
3 strcat
2 dyldstubstrcat
2 dyldstubstrcat
3 0x1afa4
3 strlen
3 strlen
3 0x1aff4
3 0x1aff4
3 0x1b038
3 0x1b038
2 0x1af10
2 dyldstubmemcmp
2 dyldstubmemcmp
2 0x1af34
2 dyldstubmemcmp
2 dyldstubmemcmp
2 0x1afe8
2 0x1afe8
2 0x1b088
2 0x1b088
2 0x1b0c4
2 strcpy
2 strcpy
1 0x1afc0
1 0x1afc0
1 0x1afe4
1 0x1afe4
1 0x1b044
1 0x1b044
1 0x1b048
1 0x1b048
1 0x1b074
1 0x1b074
Total number in stack (recursive counted multiple, when >=5):
Sort by top of stack, same collapsed (when >= 5):
lstat 575
readlink 133
0x1b030 57
0x1b064 16
strcat 10
strcpy 10
dyldstubstrcat 7
dyldstubmemcmp 6
dyldstubstrcpy 5
strchr 5

Palm TX won't connect to computer via WiFi for Hotsync

I've tried the network Hotsync on all my computers, XP, Vista 32 and Vista 64 (which started the whole attempt) and the device fails to connect to the computer, even when I put in the IP address.
My wireless network sees the Palm and I am able to access the Internet through it, but it won't connect to my computers. Any suggestions?
Post relates to: Palm TX
This question was solved.
View Solution.

Here's my Wifi Hotsync help file:
Wifi HotSync with a TX
1. On your PC, locate the HotSync Manager (little HotSync icon in the lower right tool tray on a Winbox). Click on it and check off "Network", then click again and select Setup.
2. Pick the Network tab up top in the window that opens, and find your HotSync name in the list. Make sure it's checked.
3. Tap the TCP/IP button, and look at the IP address listed for "Primary PC Address". Write it down.
4. Turn on Wifi on your Palm and connect to your router.
5. On your Palm, select the HotSync program and tap the word "Network" above the HotSync icon in the middle of the screen. Below it, enter the IP address you wrote down in step 3. (Include the periods!).
6. Tap the big HotSync icon above the IP address, and hold on!
7. If you're holding on, and nothing happens try a wired HotSync, then try the Wifi HotSync again. Sometimes, information has to transfer from your PC after you check off the Network option. Also, be sure to watch for any Firewall activity asking you about "HotSync.exe is trying to access your hard drive" etc. You may need to set a rule to allow it.
On your TX, check these settings from the pull-down menu in Hotsync:
Modem Sync: Network
LanSync: :LANSync
Network Setup: (Wifi should be listed as one of the networks)
WyreNut
Message Edited by WyreNut on 11-02-2008 10:59 AM
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Won't Connect to Internet Via Browser

I have tried all I know. My iMac won't connect to the internet via browsers. AirPort Utilities says it's a good connetion. Network Diagnostics says it is working properly. So why are all

What happens when you try to connect?

Won't Connect To Flickr Via Airport But Ethernet Is OK?

Ok, this is really strange, I've got a MacBook Pro 2.33Ghz 15" and as of yesterday I cannot connect to flickr.com via wireless. However, when I plug in my ethernet cable, everything is fine. I'm using a Netgear Router but I've not played with any settings on that for months. I'm really quite confused and can't think what it could be (I'm a Mac Noob so I could have done something I suppose).
Can anyone enlighten me?
Simon
UPDATE: I should also say that I cannot ping flickr throught airport access either, but ethernet is fine

And as another update, I've just installed BootCamp and there's no problem connecting to Flickr via wireless when i boot into that partition, so the issue has to be somewhere in OS X ?
What a strange problem? Please help....it's driving me mad!

Nokia N80 won't connect to internet via airport extreme

My Nokia N80 connects to the internet through a wireless network at work (not sure of the set up) but won't connect to my wireless network at home which is airport extreme with 128bit encryption. Any clues?
Thanks in advance

Probably a WEP key issue.
One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Though sometimes not even that works and the HEX key must be used regardless.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058
iFelix

Windows 8 won't connect to SG300 via console

I seem to have a very simple comm issue with my new SG300-28 switch . When I tried to connect to it via the console port using my Windows 8 PC it will not see the device even on the active com port and setting at 115200, 8, N, 1 and none (per the admin guide). I've done this a hundered times on routers and switches, but this model seems to require something a little different. Anyone else encounter something like this before??

Bernard,
Are you able to reach the web interface of the switch?
Are you using a blue Cisco console cable or the tan color serial 9 pin cable that came with the switch? The blue cable will not work.
- Marty

FTP Won't connect. Any ideas?

I have a client that is trying to switch from FrontPage to Adobe Muse. However they can not get the FTP to work. I downloaded Muse and tired it also and I can't get it to work either. This is the message the FTP screen gives me.
However when I log into the server it appears the connection username password etc all work fine. As you can see here by the FTP server interface
So my question is why can't Muse seem to open a data connection when the username and password are fine? Also I tried the same username and password and host info in FileZilla client and of course it works fine.

Hi,
Do you support EPSV? When you tried FileZilla client, was it using EPSV?
Are there any server-side logs?
Thanks,
Abhishek

Ftp won't connect

GREetings All,
I am having trouble with dreamweaver's ftp setup. I have allowed through the firewall and changed username an password but when I test it it still doesn't connect it says local firewall blocked ftp data.
How do I fix this problem?

Enable passive FTP and try again, please.

Dreamweaver CS3 ftp won't connect

Very unusual ftp problem: Server is MS IIS. I have multiple
Dreamweaver sites defined for this server. Been using them for
years. All sites connect fine except one. The one initially worked.
For the one problem site, clicking the Test button in Remote Info
tab connects just fine. Clicking the Connect button in Files will
time out every time. Using WSFTP to the same site and folder works
just fine. The only difference between this site and the ones that
work is the folder name. They even share the same parent folder.
ftp connection parameters are the same. How can this be?

I solved it myself. It turned out to be a corrupt site
definition in Dreamweaver. By deleting the site, then recreating
it, everything works as it should.

IMac G5 won't connect to internet via Ethernet

So i have an iMac G5 that isn't connecting to the internet via ethernet.
I have already taken a look through all the Network Preferences, tried going through the network port configurations and setting all of that up again, created a new location for it.
I tried turning off the modem, and letting it restart - restarted the iMac - tried to set up all of these settings again.
I also created a test user account to see if it would work there - still nothing.
I hooked my own 17" MacBook Pro to it and it works perfectly. I never had to go through any settings on mine - it just worked as soon as i plugged the Ethernet cable in.
So the modem itself works - because my computer works. What else could be the problem?
I went through the Network Diagnostics on hers - all green dots and it says that the internet connection is working perfectly. It gives me an IP address - but it still won't load a webpage, and it tells me there that i am not connected to the internet. I am all out of ideas.
If anyone can help me with this it would be greatly appreciated. Thank you so much!

What OS you using? 10.5?
My memory of 10.5 is fading so you may need to figure out the vague instructions.
To make this easier to type Macbook Pro = MBP
When testing disable wifi & use ethernet on both machines.
Are both set to use DHCP? Or are you using manual settings?
Compare the IP addresses of the MBP & the iMac when they both use ethernet.
Compare the subnet masks too just to be sure nothing is different.
Does the iMac do any local networking at all? (e.g. is iTunes or File sharing visible on it). see *
Does it see the MBP in the sharing sidebar or can it connect to anything on the local network?
Have you connected the MBP to the iMac using the exact same cable that the iMac connects to the router?
Does the MBP work if connected to the router using the iMacs ethernet cable?
* You will need to enable file sharing to see the shared Mac in the sidebar (or have mother service shared). Enable it in System Preferences > Sharing whilst you test.
If you are have local networking in a functional state it could be…
DNS - what is the iMac DNS set to on each Mac?
Are either of them showing a grey DNS entry in System Preferences > Network? That means the router is supplying that info.

My iMac won't connect to Youtube via wifi. Ethernet is ok.

For reasons I cannot discover, I cannot open Youtube.com via wifi on my iMac. It will open when ethernet is connected. This is the only site that seems to be affected. It stalls for a second or two, then I get a blank screen and the URL changes to www.youtube.com/?tab=w1. I read through every forum I can find, tinkered with the network settings, deleted cache files for the browsers, etc. Firefox, Safari and Chrome all do the same thing. It was working fine for awhile and I don't believe that we changed anything that caused this, so I am at a loss. Has anyone else had this issue and know how to solve it?

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

IWeb integrated ftp won't connect. Settings confirmed via standard ftp client

Similar Messages

Maybe you are looking for