IWeb is driving me nuts! HELP!
I have been using IWeb for awhile. Now, all of the sudden everytime I go to publish a new page, it republished ALL of my pages and takes forever. Plus, sometimes the formatting is messed up on the actual site. Lastly, sometimes some of the pages don't even show up on the site. I loved this program, but in the last month it is driving me up a wall. I have IWeb 1.1.1 and I don't know what is going on. Please help!
Hello Boston here also. I have noticed that when you create a new page, iweb will automatically publish the whole site. I m not sure if there is a way around this, but one thing you could do is back your site up and replace the files you didnt change with that. To backup you go in to your idisk click on iweb and sites and copy the website folder to say an external hard drive or a specific place on your computer. Then when you create a new page or modify a page simply add that finished product to your backup and then replace your original site folder with your changed backup. I hope this helps, and I made sense. If not search the discussions for iweb backup and you will find past threads about this subject. Good luck
Similar Messages
-
HI there can you tell me why none of my music will play on itunes it just displays a message saying it cannot be located please help it is driving me nuts
JanAbout 5 days ago for no apparent reason at all, about
7000 songs which i have collected over a number of
years has just decided that it wont play in ITUNES or
in any other of my media players. When you click on
Play over a song nothing happens. The play icon
doesnt even come up on the screen.
Steps I have taken so far are:
1 - Remove all tracks from ITUNES and then re-add the
folder where all the songs are. This has obviously
removed all songs, but when I have re-added the
folder , it has added about 650 tracks back on to the
playlist. These 650 tracks will play. This leaves
approx 6400 tracks that it wont play.
By the way all the songs on my PC are MP3 type and I
have had no problem playing any of them until last
week.
2 - I have re-installed ITUNES and reinstalled
Quicktime and that has not worked.
3 - All of my songs are backed up on to a External
Hard Drive. I have tried to restore the songs and
also play them directly from the external hard drive.
I get the same problem when I do this.
4 - I have enabled and allowed all permissions for
the account that I am running the PC from.
I am guessing there must be some settnig or Registry
Key that is blocking me playing the tracks from the
PC. I have also tried to launch the songs in Media
Player and Sonic stage but thsi has not played
either.
All the tracks are in the folder structure as they
were before so I know they are there. I just need to
somehow unlock them.......
If anyone has any ideas, I would be very grateful as
I dont want to lose my entire music collection.
Also I cannot find anyweher on here that is a Support
number or email address for Apple as this is an
ITUNES issue and they should be resolving it for
me!!!!
Thanks
Dell Windows XP
Pro -
My wifi only connects for a few minutes then goes away, I've been trying to look for solutions on the Internet but none of them work, help! It's really frustrating.
Hello FrancisN,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628?viewlocale=en_US
and
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/HT1365
Intermittent or complete loss of the wireless connection
Best of luck,
Mario -
EMERGENCY!!! HAVE A SUNDAY DEADLINE AND IMOVIE IS DRIVING ME NUTS-HELP!
OK HERE IS THE DEAL..I USE IMOIVE FOR MY BUSINESS CREATING DVD'S FOR BUSINESS AND VIDEO SCRAPBOOKING...I HAD 6.0.3 AND JUST DUMPED IT TO REINSTALL IT TO TRY TO CORRECT A GLITCH.
ONLY TO FIND OUT THAT I HAVE TO GO BACK ALL THE WAY TO 6.0 BECAUSE O1 THRU 03 ARE UPDATES! THE PROBLEM IS THAT I WENT TO APPLE AND THEY ONLY HAVE 6.0.2 AND 3 AND NOT 6.0 OR 6.01 TO COMPLETE THE SERIES OF DOWNLOADS.
I ALSO FOUND 6.0.4 THAT THEY CAME OUT WITH FOR THE ****** OFF 08 USERS BUT I INSTALLED IT AND IT DID NOT CORRET MY PROBLEM..
WHICH LEADS ME TO THE ORIGINAL ISSUE...
I HAVE BEEN DEALING WITH A GLITCH THAT OCCURS WHEN LOADING PHOTOS INTO 6.0.3 THAT CAUSES THEM TO DISTORT EVEN BEFORE PUTTING IN TRANSITIONS (EXAMPLE --- PUT IN A WEDDING PHOTO OF A BRIDE AND IT LOOKS LIKE SHE HAS A BLACK EYE AND A FAT LIP!)
I THOUGHT IT WAS A TRANSITION ISSUE BECAUSE WHEN YOU PLAY IT BACK WITH TRANSITIONS THE MOVIE WOULD START WITH THE PHOTO LOOKING OK THEN JERK DISTORT IT AND THEN JERT AGAIN AND BE OK RIGHT BEFORE THE NEXT TRANSITION.. THAT IS UNTILL I SAW THE PHOTOS LOADED INTO 6.0.4 RIGHT AFTER DOWNLOADING IT...
SORRY TO BE LONG WINDED BUT MY QUESTIONS ARE THESE...
1 HAS ANYONE ELSE EXPERIENCED THIS PROBLEM
AND
2 IF 6.0.4 IS NOT GOING TO WORK WHERE CAN I FIND THE ORIGINAL 6.0 AND 6.0.1 TO COMPLETE THE SERIES OF DOWNLOADS TO PUT 6.0.3 BACK ON MY COMPUTER TO SEE IF THAT WORKS
I HAVE A CLIENT THAT NEEDS HIS VIDEO BY NOON ON SUNDAY FOR A TRADE SHOW
PLEASE HELP NOWWWWWWWW!!!!
feel free to email me direct it would be faster for me
see address below
THANKS
GREG WILLIAMS
<Edited by Moderator>iMovie 6.0.4 is supposed to be exactly the same as 6.0.3. Apple released it under the .4 number for download for those who purchased iLife08 and did not have any previous version of iMovie 6 on their computers.
Have you tried deleting iMovie's preference file? Go: Home(YourUserName)/Library/Preferences/com.apple.imovie.plist
With iMovie closed, locate and drag this plist file to the trash. Reopen iMovie and see if it works properly.
If you think the problem might be with iPhoto, you can trash its plist as well: com.apple.iphoto.plist
To reinstall iMovie 6.0.3, you need to locate your original iLife 6 disks and use those to reinstall. If iLife 6 came preinstalled on your computer, you should find it on the software restore disk. You may need to download and use Pacifier to extract and reinstall iMovie 6.
The combo 6.0.2 update (available on Apple's support site) will update from 6.0 to 6.0.1. -
Messages is driving me nuts - HELP
I am a very technical person. Software and web app developer that has worked with Apples for 20 years.
I simply cannot figure out what the h@ll is going on with the Messages. Nothing syncs correctly between iPhone, Mac and iPad.
I send a message from my mac to my wife. She gets it on her phone and not on her mac. If she replies, I get it on my mac, not on my phone. If she sends from her mac, I get it but under a whole new chat on my Mac, so I am having 2 conversations.
Here is my setup :
Mac Mountain Lion Messages :
Bonjour and AIM disabled.
iMessage enabled.
3 emails enabled ( [email protected], [email protected], [email protected] )
send read receipts enabled
Start New conversations from xxx.me
Nowhere is there an option for my cell number
iPhone 5 :
iMessage enabled
Send Read Receipts Enabled
Send and SMS Enabled
Send and Receive same 3 emails and my phone number
start new conversations from [email protected]
MMS messaging Enabled
Group Messaging Enabled
Show Subject Disabled
Character Cound Disabled
My wife's is setup exactly the same with her iCloud account.
Anyone got a clue how to get this to work correctly.OK... I am not going to say that this is 100% solved yet becasue I have thought that before but after messing about the whole morning this is what I found.
The iPhone 5 settings above are correct and must be setup first. On the mac, you must SIGN OUT of your iMessage account. Messages > Preferences > Accounts. Select iMessage and click "sign out"
Quit Messages and then relaunch it. Now sign back in to messages at the same place.
Suddenly it pops up with a message that now has the phone number (as well as the emails) as one of the places to receive messages. This never happened before.
Now make sure that Start Conversations From is set to you primary iCloud account. usually [email protected], not the phone numbers. Must be the same as the iPhone and iPad.
Close preferences.
Final step and I don't know if it's required but I closed all conversations and started fresh with new chats.
Now everything appears to by syncing perfectly and instantly. -
now my phone has error 4005 what is going on??
Quote
Originally posted by Ludic
Quote
Originally posted by ninjastyle
I know that disc very well... hehe...
I actually have an 8-in-1 version disc that could put an illegal copy of XP in any form (Home/Pro/Media Center/etc) on any computer. However, I actually use it for good, because it allows me to install with any valid key as well. So instead of waiting to see if someone can produce their discs when there's a valid key sticker on the PC, I just use the key and my disc.
Ah yes, I saw this on The Site They Named After An Exploding Star™. -
Hi there Apple Community!
I have a problem with my iCloud - it is registered to my old iTunes account (old work e-mail that doesn't work anymore) and I can't remember my password or security questions, argh.
Can someone help me delete my iCloud from my phone without restoring my phone as its driving me nuts!
Many thanks in advance.Paulini88!!! wrote:
Hi there Apple Community!
I have a problem with my iCloud - it is registered to my old iTunes account (old work e-mail that doesn't work anymore)
Then update it to new email address. Creating a new AppleID is usually not a good thing as anything on your old account will not be transferred to your new account.
See this -> Change your Apple ID - Apple Support
and I can't remember my password or security questions, argh.
So reset them...
See this -> If you forgot your Apple ID password - Apple Support
Can someone help me delete my iCloud from my phone without restoring my phone as its driving me nuts
Restoring it will not delete it.
You need to turn it off (Settings > iCloud - Delete account then re-enable it with updated AppleID.
This is the ONLY way you can do it. -
I forgot my original password..my ID was disabled..I did factory restore through iTunes..I was sent email from apple with the 2 step recovery..I had followed instructions only to find one part that asked for my old password before I could re set a new one !
It's driving me nuts..it's ridiculous and I'm still unable to use any apps or face time..
Please help if you can..I'm desperate and apple support can't or won't help me so if given up.Alternatives for Help Resetting Security Questions and Rescue Mail
1. Apple ID- All about Apple ID security questions.
2. Rescue email address and how to reset Apple ID security questions
3. Apple ID- Contacting Apple for help with Apple ID account security.
4. Fill out and submit this form. Select the topic, Account Security.
5. Call Apple Customer Service: Contacting Apple for support in your
country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID -
My delete button in my to do's closes the app. I've closed all the background running apps and have restarted my phone and even tried syncing to my iTunes. It's driving me nuts. Please help!
Will not complete a sync without crashing and saying cannot read to the device or something to that effect.
That sounds familiar.
Just doublechecking ... have you worked through the suggestions from the following document in the course of your troubleshooting to date?
[What to do when Windows displays a blue screen error message or restarts when syncing the iPhone or iPod touch|http://support.apple.com/kb/TS1502]
(The stuff I was worried about in my initial reply has since been documented in its own troubleshooting document. Some of the symptoms of that are covered in: [iTunes for Windows: System restarts, blue screen, or quits unexpectedly when accessing iTunes Store|http://support.apple.com/kb/TS3441] ) -
DRIVING ME NUTS...PLASE HELP!!!
This is driving me nuts. Now, whenever I render or scan(forget what the function is called when you slide the mouse on the timeline to view the clip), MY COMPUTER SHUTS OFF! Then, when I turn it back on my imported files are mising and swapped. For exmple Clip #3 will play back as Clip #45..HELP!!!!!
More info please... Format, sequence settings etc...
Could be dodgy Ram... in which case, shut computer down and remove Ram sticks one by one until problem goes away.
Could be corrupt render files... Did you have to render your sequence? If so, dump all render files and re-render.
Could be corrupt media files/directory... When you scrub through the timeline, does it crash at the same point? Try to see if there is one particular clip that causes issues. If so, remove clip from capture scratch and re-capture.
Firstly though, before anything... Have you tried trashing preferences? -
Every time I turn on my laptop about half a dozen previous documents open up and I have to close them before I can begin. Can anyone help me prevent this from happening as it's driving me nuts!
First thing to (un)check:
When you shutdown/restart, there's a dialog box which confirms your request. In that box is a little checkbox which you should uncheck.
charlie -
iPhone 5S IOS 8. Can't figure out how to disable the "live" location feature within the native calendar app used for mapping/travel time etc. Have looked everywhere and it's driving me nuts. Thanks for any help on where to make the change!!
iPhone 5S IOS 8. Can't figure out how to disable the "live" location feature within the native calendar app used for mapping/travel time etc. Have looked everywhere and it's driving me nuts. Thanks for any help on where to make the change!!
-
This rummy game is driving me nuts, Please Help me!!!!
In my project, I am suppose to create an agent that plays a simple version of rummy. To win this game, the agent is dealt seven cards initially, and in order to win, it has to create two sets of combination of cards (one of 3 cards the other of 4), each combination can either have cards of the same rank (eg. 10 Hearts, 10 Clubs, 10 Spades) or the same sequence, but the same suit (2s,3s,4s,5s OR 7c,8c,9c). The cards are saved in an array of seven elements.
Beside the main SDK, we have our own api for this game, that for example lets you check whether two cards are in the same rank (eg. (10H.sameRank(10D) returns true), or whether they have the same suit or not.
I have no trouble creating a hand of cards with the same rank, but my problem is with creating a hand of cards with the same sequence.
I have tried to come up with an algorithm that would allow me to create a hand of cards (of same suit) in the sequence, but without success. This thing is driving me nuts.
CAN ANYONE GIVE ME ANY GUIDANCE PLEASE!!
Thankshttp://forum.java.sun.com/thread.jsp?forum=406&thread=354616
-
Hi everyone. I am trying to download ML on my iMac and when I click the download button, I am asked for my PW which I provide and then the ML icon launches in launchpad but nothing takes place. Have been trying for 2 days and this is driving me nuts. Help
Yes it does and there is an indication that the software is downloading but after a few hours, it just stops without any error message. Everything simply disappears and I need to start over again. I have a superfast connection so it should no be this slow. Everything worked fine on my MBP and I am in the same place. Any ideas
-
Ssrs report from ssas cube , driving me nuts now...
hi folks:
This is driving me nuts and I know it's gonna be some small stupid settings. The question is pretty simple, I want to users to be able to pick up a week from date hierarchy. If I specify a static week, mdx query will run and report shows with
correct data and format.
Now, in the dataset I've created using query designer, I've dragged data hierarchy into the filter and check the parameter box and also put a default value as well. Technically, when I run this report, I am supposed to see a dropdown list with all
the available dates but I did not see any dropdownlist and report still runs with default value.
Why is this happening?
Thanks
Hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --Hi Hui,
Just as Gnanadurai said, a report auto runs when all parameters has their own default values. This scenario can also be occurred when there are no available values for the parameters. So if you want to see a drop-down list with all available dates when the
report runs, we should specify some available values for the parameter. For example, we can specify the available values come from a dataset field. Then the values in the field would be displayed in the drop-down list, we can select some of them to filter
the report.
Reference:
Adding Parameters to Select Multiple Values in a List (SSRS)
Hope this helps.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support
Maybe you are looking for
-
Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on
-
Hello Experts, We have a URL iview which is pointing to a HTML file and from HTML file we are calling a pdf document.When user clicks on link, pdf is not opening in some laptops(but it opens properly in some laptops).We are on EP6,Adobe reader8.0.0 a
-
Music files are not updating in nokia n-79.
I added mp3 files to my mobile nokia n79,but files is not updating in music library,when we refresh manually it nont stops saying "0 file added"...,but when i play songs in filemanager it plays well..pls help me out of this ASAP.
-
Bug? SQL server 7 - Oracle 8i stored procedures
I'm having a problem converting some SQL 7 stored procedures to Oracle using MW. The cursor definition appears to be garbage in some cases. See example as follows: *********** SQL 7 stored procedure ********* CREATE PROCEDURE CLCClaim /* Procedure: C
-
How do you change the music of a slideshow
This weekend, I want to run a slideshow of my nephew's photos in Front Row. How do I change/select the music that plays in the background?