IWeb is not keeping pages formatted

iWeb is not keeping pages formatted after I upload and then quit iWeb. When I reopen iWeb the newly created photo album has lost all its photos, and formating is gone. I have not moved the photos from the HD, they are still in iPhoto.
All other pages are fine. sample image
Bad Page: http://www.architecturephotographer.com/Picture_9.png
Fine Page: http://www.architecturephotographer.com/Picture_10.png
Message was edited by: Tom Bliss
Message was edited by: Tom Bliss

Roddy,
That did it. It took a few times, but it seems to be working fine now. I deleted the photo album, quit iWeb, deleted the "Folder" /Library/Preferences/com.apple.iWeb.plist, Restarted.
Opened iWeb, then quit it. Then deleted com.apple.iWeb.plist, restarted. Opened iWeb, added the photo album back, published it, saved, quit. And when I reopened iWeb the album was still there. Also iWeb is running faster.
Thanks Roddy.
Tom

Similar Messages

Problem with iweb not keeping text format

I have a web site http://www.klelectronix.com and view the page HDS Tutorial you will see the page kept the formatting just fine.
The next page which is Structure Scan Tutorial did not keep the formatting as you can see the Table of Contents has all the numbers at the end of the statement.
The two pages were done exactly the same way. The document was done in Word and then copied and pasted into the web page. The formatting seems to go away from an HTML point of view just after you publish the site changes to a local folder and view the web site via Safari before uploading to the web site. I have looked at the code and don't see any difference between the pages.
Any insight would be appreciated.
The site use to work fine. I have lately updated to Snow Leopard which probably doesn't have a thing to do with it just to mention it.
LarryB

I've tried that and using a text box in iWeb is tough as you don't have much control. It will render ok is you can get everything lined up but that is tedious at best. I have produced this document in Word using a table of contents if you are familiar with the procedure. What bugs me is both were done the same way and one copies with conversion but the other does not. I actually prefer it to convert but can't control when and how it does. If you have Word I can send you a copy and you can see what I mean.
I finally just copied the Structure Scan and then pasted as a picture back into Word, then copied the picture into iWeb. As you can see it has the white background that is not too nice. While the HDS one copies from Word and paste into iWeb with the conversion to a picture but maintain the iWeb background.
I tried everything to maintain the original formatting by using various methods of pasting back into Word then copy/paste into iWeb. Nothing works.
Even tried to add all the items that iWeb says will cause a conversion but even that did not work.
appreciate your time old toad, couldn't be any older than I. ha
Larry B

Device type does not support page format

Hi All,
There is one issue when I print a sapscript. I get an error message as follows:
Device type EPESCP9 does not support page format ZSG02
Could someone advise?
Thanks
Alice

Hi,
The page format ZSG02 is not present in Device type EPESCP9.
in SPAD t.code add the page format in that device type.
Better inform to BASIS people they will add page format in that device type.
Refer the link Device type does not support page format
Regards,
Dhina..

CS5 issue - Text not keeping Vector format when saving as PDF

Hi everybody,
I am very frustrated right now. I am working in PS CS5 in Windows, and I cannot get the text to keep the raster format where it's cleaner / clearer, and can be highlighted, searched for, etc.
What's really puzzling is that it will work sometimes, but other times it will not, and I'm not doing anything different. Some text layers keep the vector format, and some do not. I've searched, and the only solution I see is for older versions of PS where it just says to select the "keep vector format" checkbox, which is not in the save options in CS5.
Can anyone help me out with this? Any assistance would be much appreciated!!
Trevor

Hello!
Yes, faux bold is an effect on the text that can't be vectorized.
You'll need to change your font to another one that has a "real" bold option.

Help please.. .iweb will not show pages anymore

have 2 different full sites built and have had no problem in iweb 09.. until now. had moved pages and was publishing back to folder when . . . . it wouldn't publish... then i went to open pages in iweb and it will not show any pages or any site. i can open iweb, but the directory will not come up...
even tried to restore the application .... no go.... i now have 2 sites and, oh, about 25-plus pages lost somewhere..
any ideas?
thanks!

Welcome to the Apple Discussions. Try the following:
1 - close iWeb.
2 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
3 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
4 - reboot.
5 - launch iWeb and see if there's any improvement.
If that doesn't help continue:
6 - move the domain file from your User/Library/Application Support/iWeb folder to the Desktop.
7 - launch iWeb, create a new test site and save.
8 - go to the your User/Library/Application Support/iWeb folder and delete the new domain file.
9 - move your original domain file from the Desktop to the iWeb folder.
10 - launch iWeb and try again.
OT

IPages does not keep page setup when I save as template

I have created both an envelope and a 4 x 6 note card in Page Layout, both LANDSCAPE with custom, named, paper sizes, and saved both as a template in My Templates. In both cases, when I start a new project using either template, the page setup has the orientation as PORTRAIT and paper size as OTHER. How can I make sure the Page Setup options are saved in the template?

shac
I have made a sample card and it works as expected.
+Menu > File > Page Setup… > check Orientation vertical > click on the plus button > make a new custom page 6" wide x 4" high > Name and save+
Design and Save As Template.
I think you have got confused with the orientation in the custom and Print As… options. They work together.
When the orientation is vertical, the measures must be width and height as you see it on your desktop.
Landscape orientation rotates the page just as you see it in the little icon, effectively turning it on its side.
It all has to do with which way it is fed into the printer. Horizontal custom + vertical feed = Vertical custom + landscape feed.
Peter

One note updating page format

Sorry, I'm new to OneNote and I'm sure my problem is pretty basic. When I delete something from the top of the page how do I get the items below to move up?

Hi,
"When I delete something from the top of the page", by this do you mean if you delete a container and you want the container below it to move up?
Say, if Test1 container is deleted, you want the Test2 container to move up, right? I don't think we can do this in OneNote. What we can do is to manually click the move handle of the note container, and then drag it to the new location. For more information
about OneNote container, please refer:
http://office.microsoft.com/en-in/onenote-help/work-with-note-containers-HA010214064.aspx?CTT=1
If I've misunderstood something, please feel free to let me know.
Best Regards,
Steve Fan
TechNet Community Support

Regarding smartforms page format

i create a page format of size 240mm width and 93mm height and go through the transaction SPAD and i done the device type setup also correctly. but when i try to take the print out it is showing the following error as follows.
exception : send_error
message id : ssfcomposer
device type swin does not support page format <name>.
please anybody can give solution for this.

Total Posts: 7
Total Questions: 6 (6 unresolved)
Did you even try to search before posting. Similar threads have been discussed no of times.
[Creating custom page format for sapscript/smartform|http://sample-code-abap.blogspot.com/2009/05/creating-custom-page-format-for.html]
Close the threads if resolved
Edited by: K.Manas on Dec 28, 2010 6:06 AM

Page Format Exists But Cannot be used

Hi experts!
I have created through SPAD a page format for a specific device type .
From the Formats List for this device type i can see it. But when printing i get the message 'Device type ZI7SWIN does not support page format'.
What am i missing here???

Hi,
The steps to assign the page format to device type.
1- Create the page format
2- Create the format types and assign the page format to this FORMAT TYPES
3- Print Controls (Optional)
4- Assign the format type to the device type
Please close the thread, if solved
Regards,
Aditya

How to create a Customized Page format?

Hi Experts,
Page size is ht- 278mm, width - 242 mm.
Printer - EPSON LQ-680 (Dot Matrix Printer)
Paper - Preprinted Stationary ( For Invoice Printing)
As per the comments I have followed the below steps for my page format.
From SPAD Transaction,
1. Created Page format -
Page Format ZINV_JGT
Orientation as - Portrait
Width 242 Unit MM
Height 278 Unit MM
2. Created Format type
Format Type ZINV_JGT
Type Format type for sap script
Page Format ZINV_JGT Orientation - Portrait
Comment Page format for JGT Invoice
3. Created Device type
Version 1
Device type ZINV_JGT Name Device driver Invoice print
Driver SAPlpd/SAPWIN driver 3.0
Printer Driver Do not printer driver for ABAP list Print
Character Set 1135 Printer EPLQ550 ASCII multilingual
4. When to format for device
Then created a format zinv_jgt
I get the below options in this tab. What code i need to write here.
Printer initialization
Reset after exit
Cover page
First Page
Start of even page
Start of odd page
Start of page
End of first page
End of even page
End of odd page
End of page
Start of line on an even page
Start of line on an odd page
Start of line
End of line on an even page
End of line on odd page
End of line
Please check whether the above steps and the data filled is correct for my type of page format.
Please help me on this.
Thanks and Regards,
Abdur Rafique

Hi Alexander,
I was not able to add the code in the Printer initialization and the other following steps.
Printer initialization
Reset after exit
Cover page
First Page
Start of even page
Start of odd page
Start of page
End of first page
End of even page
End of odd page
End of page
Start of line on an even page
Start of line on an odd page
Start of line
End of line on an even page
End of line on odd page
End of line
Please tell me what data i need to add? I think the above steps are used to define the format of the page.
Please help me on this?
If i give a print command without the code in the format type. I'm getting the following error.
Device type SAPWIN does not support page format
ZINV_JGT.
Regards,
Abdur Rafique

How do I keep format when copying a table to keynote? paste and match style does not keep format

how do I keep format when copying a table to keynote? paste and match style does not keep format

It used to work until recent updates and it is very frustrating.....I hope someone out there knows how to deal with this.

"Output could not be issued" when using custom page formats

Dear all,
I created a custom page format using SPAD. Its dimension is 7.5cm x 10cm (190mm x 254mm). I also created this page format in windows and set as the default paper size in my printer. However, when trying to print a smartform using this size, the message "Output could not be issued" is given. When I use the standard paper sizes (e.g., LETTER, DINA4), the form prints OK.
Can you point me to the direction to solving this?
Thank you!
Kyle

Issue resoved.
For those who are encountering the same problem, here's what I did. I tested the smartform by itself and it reported the specific error: the page format is not supported in device type SWIN. I added it in another device type SAPWIN. This was just a simple miscommunication between the admins and the developer. I added the format in SWIN and everything works fine.
Kyle

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

Page format for SAP-Script not working in 4.6C

Hi all,
I have a problem regarding check printing.
I am using SAP version 4.6C
The size of paper for check printing is
width = 231 mm
Height = 304 mm
So for this I have created a new page format with these details in SPAD.
Then I assigned this Page format to spool format and assigned that spool format to SAPWIN driver. I have assigned this page format to the SCRIPT that is used for check printing .
But when I am taking the print out for the check with new page format, the printer dont print till the end of page, it prints till the total amount on check and then stops there. So this creates an alignment problem when taking printout for multiple checks.
Please give some solution for this.
Regards,
Bharat.

I guess you are printing on dot matrix printer. If yes, try to do some physical printer settings for the dot matrix printer by following the printer manual. I guess you have to change the page size.. or set default printer settings... it may help you to solve your problem...
if not goto your device types tab in SPAD and select device types.. select your device from the list (for ex, SAPWIN) click format and goto the format that you have inserted for this device types.. double click on your format, you will see printer Indialization.. try to write code like this
set page length to 8.5 inch (=52 lines at 6 LPI)
\e\0x43\0x44
Note the above hexa decimal value can be obtained by going through the printer manual.
Close the thread once your question is answered.
Regards,
SaiRam

I am exporting a pages doc to ePub and I keep getting formatting problems any idea thx in advance

I am exporting a pages doc to ePub and I keep getting formatting problems any idea thx in advance

Since you don't say what the "formatting problems" are, all we can say is:
"There, there. Hope they get better."
Peter

IWeb is not keeping pages formatted

Similar Messages

Maybe you are looking for