IWeb is not saving changes!

I've created a new site using iWeb 08, and have added a couple pages and a few albums to it. I used the media browser to import albums from Aperture. So far, so good, but I only get about halfway done with what I want to do before things get screwy.
Here's the site: http://web.mac.com/rob_meyers/Jason/
I have pictures I'm trying to add to the site for the other years. If I select and drag several albums from the media browser window to an album page in iWeb, iWeb locks up. If I drag the albums individually, I get a little further. I try to save, in that I select "Save" from the File menu. The "Saving.." message window pops up, and disappears normally. After I try to publish my changes, iWeb locks up while trying to connect to my .Mac account. I have to Force Quit iWeb, after giving it about 20 minutes to connect to my .Mac account, and watching it ignore my clicks on the Cancel button. When I restart iWeb, all of my imports, and other changes since I last published, are gone!
Honestly, iWeb is the only reason I bought iLife 08. I use Aperture for photo management, and I'm not musically inclined nor do I create movies. It's extremely frustrating when software doesn't work right, especially if it's Apple software (which I'm normally very happy to use).
I have all of the latest Software Updates installed.

See this page for info about Google maps...
http://www.iwebformusicians.com/iweb-snippets/map-tutorial.html
or go to the Google tutorial...
http://maps.google.com/help/maps/getmaps/plot-one.html
Some info about FTP...
http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html
... and an alternative way to upload the iWeb files...
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html

Similar Messages

IDVD 06 not saving changes?

Greetings. I teach an adult ed class in iLife. Unfortunately, the lab has old single 533 G4s. When we use iDVD 06, the program is not saving changes made in the different drop zones, etc. We place elements in drops zones, tell the program to save, quit and relaunch...nothing saved.
This problem was repeated by a student on his G5 at home.
Any ideas?
Thanks.
Michael Colin
Mac G4 Single 533 Mac OS X (10.4.4) Problem on G4 and G5

Hw much free space is left on the macs?
Plenty. These are very small projects we're working on.
Thanks for the response.
Michael
Mac G4 Dual 533 Mac OS X (10.3.9)

Stocks App not saving changes

My stocks app is not saving changes no matter what changes I make. After making a change, I'll exit the app, re-enter and it defaults back to a whole bunch of stuff I didn't add.
Can someone help me with this, I'm not sure where to even start!

Nadia Bielawa wrote:
This did not help at all. I'm not about to restore my iPhone and set everything up again, there must be a simpler solution.
Th simple solution is restart.
If that fails, thenreset.
If that fails, then restore from backup.
If that fails, then restore as new.
If that fails then make an appointment at the genius bar.

Enhancement in IDOC_INPUT_ORDERS not saving changes after order creation

I have an enhancement at the beginning of the IDOC_INPUT_ORDERS function module used to create sales orders via EDI. In the enhancement, I take the data records and make some changes to some quantities and units of measure. After making these changes, I let the function module continue on as normal. The order does get created with my changes in them, however, the IDoc doesn't reflect my changes.
Here's an example: An EDI order comes in with 6 EAs of a material. In my enhancement, I change it from 6 EAs to 2 3PK. I then let it go on its way. The order gets created fine with 2 3PKs, however the IDoc after its a ll done still says 6 EAs.
The enhancement runs before the FM puts the data into the tables it uses. I tried using the last user exit to open the IDoc and editing it there using the EDI_DOCUMENT_OPEN_FOR_EDIT FM but it says its open.
Can anyone give me any clues on how to make my changes stick to the IDoc?
Thanks,
Curtis

Ok, I figured out why it's not saving. Not realizing it, but the tables are passed into the FM by reference, so what I'm changing is only a copy. So what I tried to do is use the 004 (I've also tried the 005) user exits to try to update the actual DB. I used the following FMs (EDI_DOCUMENT_OPEN_FOR_EDIT, EDI_CHANGE_DATA_SEGMENTS, and EDI_DOCUMENT_CLOSE_EDIT). The problem is that I can't change them because the IDoc is still open.
Does anyone have any ideas on how I can achieve my goal of changing the IDoc?
Thanks,
Curtis

NOT SAVING CHANGES OR EDIT'S!!PLEASE HELP

hey guys,
i had this problem before along with many others, with the earlier vers of iphoto. until apple gave us the fix...now agin with 5.0.4.any changes or edits(redeye fix) are not saved to any of my pics!!
is anybody else having this problem??
is there a fix or update??
please help......thanks.

Hi sunny,
Check the permissions on the Library and Pictures folder. If they are set for you, make sure the library is not locked.
Get info on the iPhoto Library folder
screenshot of how the "get info" window should look for your user
If edits are not saved it could be the image files are locked, especially if these files came from another computer or sent to you in email. Do a "get info" on these files and unlock them.

ABAP - BDC transaction not saving changes to records

I am trying to write my first ABAP code using BDC recording. Essentially I would like to flag the "Final Delivery" field (EKPO-EGLKZ) for a range of documents by recording transaction MASS.
The code runs without errors - but the changes are not saved. I have run the code in "Processing Mode: A" (Display all screens) and the program successfully loops through each record & saves the updated fields. When I look at the documents in ME23N the changes have not been saved.   Running the MASS transaction manually results in the changes being successfully saved so I can rule out any data validation issues.
Does anyone know why the changes refuse to save when running the code below?
I have considered trying to use BAPI_PO_CHANGE instead of BDC, but I am new to ABAP and I thought the BDC code would be less complex.
report Z_MASS_REMOVE_FDI_DCI
       no standard page heading line-size 255.
include bdcrecx1.
TYPES: BEGIN OF ty_tab,
MASSOBJTYP(7),
MASSVARNAM(7),
DOCNO(9),
ITEM(1),
END OF ty_tab.
DATA : it_tab TYPE STANDARD TABLE OF ty_tab.
DATA : wa_tab TYPE ty_tab.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'X:\STO.TXT'
* FILETYPE = 'ASC
has_field_separator = 'X'
TABLES
data_tab = it_tab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
END-OF-SELECTION.
LOOP AT it_tab INTO wa_tab.
WRITE:/ wa_tab-MASSOBJTYP,
wa_tab-MASSVARNAM,
wa_tab-DOCNO,
wa_tab-ITEM.
PERFORM open_group.
perform bdc_dynpro      using 'SAPMMSDL' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSSCREEN-OBJECT'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MASSSCREEN-OBJECT'
                              wa_tab-MASSOBJTYP.
perform bdc_field       using 'MASSSCREEN-VARNAME'
                              wa_tab-MASSVARNAM.
perform bdc_dynpro      using 'SAPMMSDL' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSSCREEN-OBJECT'.
perform bdc_field       using 'BDC_OKCODE'
                              '=NEXT'.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(01)'.
perform bdc_field       using 'MASSFREESEL-LOW(01)'
                              wa_tab-DOCNO.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(02)'.
perform bdc_field       using 'MASSFREESEL-LOW(02)'
                              wa_tab-ITEM.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CRET'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(01)'.
perform bdc_dynpro      using 'SAPLMASSINTERFACE' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FDAE'.
perform bdc_field       using 'BDC_CURSOR'
                              'NR_ITEMS'.
perform bdc_dynpro      using 'SAPLMASSINTERFACE' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
perform bdc_field       using 'BDC_CURSOR'
                              'NR_ITEMS'.
perform bdc_dynpro      using 'SAPLMASSMSGLIST' '0300'.
perform bdc_field       using 'BDC_CURSOR'
                              'REOML-MSGTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=EXIT'.
perform bdc_transaction using 'MASS'.
ENDLOOP.
PERFORM close_group.

Where is BDC_INSERT.
If u use OPEN and CLOSE_group u need to use INSERT_GROUP also to update in database.
A session will be created and u nedd to run the Session in Sm35 in order to update the database.
Edited by: Ranjith Kumar on Sep 18, 2008 6:41 AM

Mail not saving changes in Mailbox Behaviors

For one of my accounts since the upgrade to Mavericks when I enter the Mailbox Behaviors section, I found that Drafts, Junk and the one under Trash named Store Deleted messages on the server is checked.
I uncheck them because I doon't want them checked. I Save the changes I made then go back to that account and the same ones I just unchecked are now checked again. Its not saving what I just unchecked.
What the heck is wrong?
Also noticed that in OSX 10.8 I could drag all my email accounts to a different order than the way they are now listed. Can't do that now.

Thanks for discovering this issue being connected to drafts. I have trouble with this for a couple of months as well.
Since you assume it to be connected to "drafts", I suggest to deselect "Store draft messages on the server" for your IMAP-Account. I just did this for myself, to see if it helps, and can't give you results yet. Maybe you just wanna try simultaneously. I guess, the reason for our problem could me some messy communication between Mail and the server, where one party get's confused.
Greetings
Paul

Crystal Reports 8.5 not saving changes to report criteria

When I use the formula editor to add new criteria to the report criteria formula, the changes are not saved when the report is closed. It doesn't seem to matter how I exit the formula editor, and I've even tried "save as" and saving the report to a new name prior to closing. When I reopen the report, the changes are gone.
Sometimes the changes don't even last that long - they often disappear while doing a refresh.
Are there and known bugs that I haven't found - or better yet, any solutions?

Hi Roberta.
I've had this happen a few times as well. Usually though a message will come up at some point in time saying. If the report is locked when you open it, either because someone else has the same file opened in Crystal or if you open the report from an e-mail attachement, a message will come up saying something in the lines of the report cannot be saved and it must be saved to a new file.
When you do the Save As, where are you saving it to? Try creating a new folder and saving it to that folder. You should have full permissions to the new folder and I'm hoping it will save. I just want to eliminate any problems with permissions. After you save the file, check the properties of the file. Did the file's date and time update or does it still have the original date?
When you open the report in Crystal, go to File on the menu bar and make sure Save Data with Report is not checked. Make your changes and rerun the report and save it again. See if that helps.
These are the two common problems I've had when this happens to me.
Hope this helps,
Brian

Aironet 1242ag - not saving changes

dear friends...
i am struggling with this devices now from some time.. not sure where is the mistake ...when i am trying to configure wireless device (AP) from web using exprerss setup or nornal manual mode .. it is not saving any changes.. means clicking on apply button does not do anything .. infact its not getting clicked... please see the screen shot attaced ..my express setup menu is different then the one mentioned in this link
http://happyrouter.com/how-to-configure-a-cisco-wireless-access-point-ap-from-scratch
any still if you make any changes and refresh the page it comes back to 10.0.0.1 ip which is shown on the screen shot...
guys any help will be really appreciated ...
or if someone can also share the commands to configure the same... but before commands i want to sort out my above issues...

Hi,
The simpleset configuration would be something like as below.
dot11 ssid TEST
vlan 1
authentication open
interface Dot11Radio1
encryption vlan 1 mode wep mandatory
interface Dot11Radio1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0
encryption vlan 1 mode wep mandatory
interface Dot11Radio0
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
encapsulation dot1Q 1 native
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip add x.x.x.x y.y.y.y (where x.x.x.x is the ip address whichyou want to assign and y.y.y.y is the subnet mask)
ip default-gateway x.x.x.x (where x.x.x.x is default gateway which you want to use)
Hope that helps
Regards
Najaf
Please rate when applicable or helpful !!!

IWeb is not saving Peferences

I web is not saving the locations of the imported media. Here is the console window error. Any ideas?
12/26/11 2:12:00 PM iWeb[2165] Could not save link back pointers.
12/26/11 2:12:02 PM iWeb[2165] Assertion failure: Method: saveLocalAssetPlistToBundleWithPath:
Object: <BLAssetManager 0x16bf960>
File: /SourceCache/iWeb/iWeb-601/src/iweb/BLAssetManager.mm
Line #: 570
Archiving of local assets plist failed!
Thanks!

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
Happy New Year

Cisco Prime Soft Appliance not saving changes to syslog.conf

Greetings,
I'm having an issue with the syslog.conf file on a Cisco Prime LMS 4.2.4 soft appliance with a Solaris base. My workplace uses local4 as the logging facility for its network devices, and according to a discussion I found on this site, I need to add the line:
local4.info /var/log/syslog_info
I have attempted this several times; we're approaching at least 5 attempts today. I have attached text files created from putty logs where I've attempted to make the necessary change. I appreciate any assistance the community can provide.
Regards,
Rob

Hi, Afroz,
I really appreciate your assistance, but I'm afraid my hopes have been dashed. The syslog.conf reverted to its original configuration. I will go through my steps to be sure that I understood your suggestion properly.
I edited the syslog.conf to put all messages from local4 in /opt/CSCOpx/conf/syslog-entries.txt. Then, I exited the shell to the console, issued the 'write mem' command, and closed the session. Upon my reconnection, I found that my changes to the syslog.conf were not saved.
Did I make the correct edits in the correct places? Another question, is this bug present in the versions of Prime LMS running Linux and/or Windows, or does it only exist in the soft appliance running Solaris?
Regards,
Rob
Edit:
I'm reading the "Installation and Migration of Cisco Prime" PDF, and it gives me the impression that Cisco Prime is only supported as Windows, Solaris, and soft appliance installations. Is that correct? If it is correct, then installation of Cisco Prime LMS is not supported on other Linux distros such as Ubuntu Server, CentOS, Fedora, etc.?
My thanks.

IWeb not saving changes when published to folder

Hello,
I'm very new to iWeb and to the whole web-design in general. My problem is when working in iWeb, and I save (or publish, if it isn't the same) to a folder, it goes fine the first time. But when I republish (I use republish in order to save my project) the changes I've just made i'snt there. When I go to the folder to check my website from the, I can't se changes there. That's very anoying (or how it's spelled )
Here's what I find odd:
ONLY when I restart my computer, the changes are there, and I can see them.
Why is that, and what do I do?
Kind regrds
Palle
Denmark

This may be too late to help you, I've just started to work with iWeb myself and discovered that if you go to the File Menu, you should see the option "Publish Site Changes", Click that and it will save the changes.
I've also noticed that the pages in the list on the left are 'red' if you've made changes to them and haven't published the changes, and blue when you have published.
(I'm also publishing to a folder for now)
Elizabeth

....STP not saving changes....

...a few people have experienced this problem and as of yet i've not seen an answer. I imported some music from an old cassette into STP did some EQ changes to bring out lost clarity then saved the mix, but when i replayed the new mix none of the changes were saved! anyone have answer for this one? thanks

That indicates that your primary account is the culprit. First close iWeb, delete the iWeb preference file, com.apple. iWeb.plist, that resides in your User/Library/Preferences folder, launch iWeb and try again.
If that doesn't help it could be another preference file that's interfering with iWeb. Here's how to determine if that's the case:
Trouble Shooting Preferences
Go to HD/Users/Your_name/Library. Move the Preferences folder (in its entirety) to the Desktop and make a second copy of it so you have Copy A and B. Now try the the process again and determine if problem is fixed.
If the problem IS fixed, then go to the new Prefs folder that the OS will have created and open it up.
Open Copy B on the Desktop and select all of the items inside. Drag them into the open new library folder. When the Copy window comes up check the Apply to All check box and then click on the Don't Replace button as seen here. That will keep the new files created and bring back all of the others.
If the problem is NOT fixed, trash the new Prefs folder and move the intact Copy A folder back to the Library folder .
OT

IWeb is not making changes to published page.

After making changes minor changes to my webpage and hiting publish. iWeb tells me it's published and to visit the site. Nothing has changed! I saved the changes made, quit iWeb and restarted, hitting publish. Nothing changes. I have not changed text or anything other than my schdule. Any ideas..... it's pretty important. Thanks.

You should read and heed this User Tip: Do not install MacKeeper
OT

Iweb was not publishing changes to my personal domain name, AND now it won't let me publish at all!

Hi, i am new to the apple community so bare with me whilst i struggle to explain...
I recently purchased a hosting site through netregistry.net. www.toyboxtherapies.com.au I spoke to them to allow the changes to the CNAME through their site.They did this for me. Once they did this my original 3 page site that I had published to mobileme came up.
When i added changes to the site, none of them were published even though iweb said they had been. I gave the site 48 hours (well, i gave them a week) to update the changes.
I went to double check today and now iweb wont let me publish to my domain name at all, it just lists File>Set up personal domain on mobile me.
When I log into mobile me my domain name is there. I have tried removing t and setting it up again, but nothing is happening with iweeb. Still the same problem.
Please help! I am trying to get this business off the ground and its all very frustrating!

This is what I see in a Lookup :
; <<>> DiG 9.6-ESV-R4-P3 <<>> www.toyboxtherapies.com.au cname +multiline +nocomments +nocmd +noquestion +nostats +search
;; global options: +cmd
www.toyboxtherapies.com.au. 3600 IN CNAME web.me.com.
It means that the CNAME record points to MobileMe.
So go where you manage your domain and delete the CNAME record and change the A-record(s) to point to your new webhost.
It takes some time for the changes to propagate thru the internet. A minimum of 20 minutes.
Note that when you publish to MobileMe, iWeb recieves the domainname information from the MobileMe server. Only when you publish elsewhere you have to enter the domainname. But if you do not change the settings where you host your domainname, it still directs to MMe. But that's beyond iWeb.

IWeb is not saving changes!

Similar Messages

Maybe you are looking for