IWeb-made website posted to Google Page Creator
I've got a website that was made in iWeb and I want to upload it to Google Page Creator as a non-homepage subpage. My problem is that when I publish the iWeb page to a folder, it creates subfolders for the graphics and extras. GPC doesn't support folders, so when I upload the page, it is missing its pictures, since the iWeb page is referencing the subfolder. I was told on GPC support forum that I have to specify in iWeb for the pictures to be referenced to the root directory of the page. Then I would be able to upload the page and all the pictures, and the page would still load correctly. How do I get iWeb to reference the pictures in the same directory as the page....or how do I get iWeb to output the page without the subfolder?
Thank you for your suggestion. I eventually hacked out a fix by editing the html code produced by iWeb like you suggested. I changed all subfolder references to point to the same directory the html file was in, then I moved (and in some cases renamed - both in finder and in the code) the files in the subfolders up to the html root folder. After uploading, everything looks and works fine. Except for one issue with IE6, which I have started another thread for. If you would like to help out with that issue as well, I would be extremely grateful! It's located here: http://discussions.apple.com/thread.jspa?threadID=1359321&tstart=0
Thanks again!
Similar Messages
-
How can I upload a page or site created in iWeb to Google Page Creator?
Thank you for your suggestion. I eventually hacked out a fix by editing the html code produced by iWeb like you suggested. I changed all subfolder references to point to the same directory the html file was in, then I moved (and in some cases renamed - both in finder and in the code) the files in the subfolders up to the html root folder. After uploading, everything looks and works fine. Except for one issue with IE6, which I have started another thread for. If you would like to help out with that issue as well, I would be extremely grateful! It's located here: http://discussions.apple.com/thread.jspa?threadID=1359321&tstart=0
Thanks again! -
Keynote as movie on iweb made website?
Hello,
I am new to this.... can I make a keynote presentation and then save it as a a movie and put it on my website (made from iweb) so that whenever someone goes to the website the movie will play?..with music too? In a fairly large screen/format?
I would like it to be automatic, not a "click here to play movie" kind of thing.
Thanks!Thank you for your suggestion. I eventually hacked out a fix by editing the html code produced by iWeb like you suggested. I changed all subfolder references to point to the same directory the html file was in, then I moved (and in some cases renamed - both in finder and in the code) the files in the subfolders up to the html root folder. After uploading, everything looks and works fine. Except for one issue with IE6, which I have started another thread for. If you would like to help out with that issue as well, I would be extremely grateful! It's located here: http://discussions.apple.com/thread.jspa?threadID=1359321&tstart=0
Thanks again! -
This is a multi-part message in MIME format.
------=_NextPart_000_004C_01C72523.8C98B690
Content-Type: text/plain;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
Acaba de entrar.=20
Primera impresi=F3n: Excelente: Espacio sin publicidad,
gratuito y =
puedes a=F1adir los Google Gadgets.
Pod=E9is mirar aca
http://luquillas.googlepages.com
Como ver=E9is s=F3lo hay un link a mi WebSite y una
panor=E1mica, no =
tengo tiempo para mas ahora xD.
Lucas Sevilla
www.lucassevilla.info
www.gestproyect.info=20
------=_NextPart_000_004C_01C72523.8C98B690
Content-Type: text/html;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dwindows-1252">
<META content=3D"MSHTML 6.00.2900.3020"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3D"Trebuchet MS" size=3D2>Acaba
de entrar. </FONT></DIV>
<DIV><FONT face=3D"Trebuchet MS"
size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Trebuchet MS" size=3D2>Primera
impresi=F3n: =
Excelente: Espacio sin=20
publicidad, gratuito y puedes a=F1adir los Google
Gadgets.</FONT></DIV>
<DIV><FONT face=3D"Trebuchet MS"
size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Trebuchet MS"
size=3D2>Pod=E9is mirar aca <A=20
href=3D"
m</A></FONT></DIV>
<DIV><FONT face=3D"Trebuchet MS"
size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Trebuchet MS" size=3D2>Como
ver=E9is s=F3lo hay un =
link a mi WebSite=20
y una panor=E1mica, no tengo tiempo para mas ahora
xD.</FONT></DIV>
<DIV><FONT face=3D"Trebuchet MS"
size=3D2></FONT> </DIV>
<DIV>
<P>Lucas Sevilla</P>
<P><A =
href=3D"
http://www.lucassevilla.info">www.lucassevilla.info</A></P>
<P><A href=3D"
http://www.gestproyect.info">www.gestproyect.info</A>=20
</P></DIV></BODY></HTML>
------=_NextPart_000_004C_01C72523.8C98B690--This is a multi-part message in MIME format.
------=_NextPart_000_0009_01C725AB.EFDC5C60
Content-Type: text/plain;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
Cuando quieras
Lucas Sevilla
www.lucassevilla.info
www.gestproyect.info=20
"Prometheus" <[email protected]> escribi=F3 en el
mensaje =
news:[email protected]...
Me enamore de la ciudad que tan calidamente retratas.
Debo verla por mi mismo.
Dark
Lucas Sevilla escribi=F3:
> Acaba de entrar.
> =20
> Primera impresi=F3n: Excelente: Espacio sin publicidad,
gratuito y =
puedes=20
> a=F1adir los Google Gadgets.
> =20
> Pod=E9is mirar aca
http://luquillas.googlepages.com
> =20
> Como ver=E9is s=F3lo hay un link a mi WebSite y una
panor=E1mica, no =
tengo=20
> tiempo para mas ahora xD.
> =20
>=20
> Lucas Sevilla
>=20
> www.lucassevilla.info <
http://www.lucassevilla.info>
>=20
> www.gestproyect.info <
http://www.gestproyect.info>
>
------=_NextPart_000_0009_01C725AB.EFDC5C60
Content-Type: text/html;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dwindows-1252">
<META content=3D"MSHTML 6.00.2900.3020"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3D"Trebuchet MS" size=3D2>Cuando
quieras</FONT></DIV>
<DIV>
<P>Lucas Sevilla</P>
<P><A =
href=3D"
http://www.lucassevilla.info">www.lucassevilla.info</A></P>
<P><A href=3D"
http://www.gestproyect.info">www.gestproyect.info</A>
=
</P></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT:
5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Prometheus" <<A=20
href=3D"mailto:[email protected]">[email protected]</A>>
=
escribi=F3 en el=20
mensaje <A=20
=
href=3D"news:[email protected]">news:emess9$1bb$1@forums=
.macromedia.com</A>...</DIV>Me=20
enamore de la ciudad que tan calidamente
retratas.<BR><BR>Debo verla =
por mi=20
mismo.<BR><BR>Dark<BR><BR>Lucas
Sevilla escribi=F3:<BR>> Acaba de=20
entrar.<BR>> <BR>>
Primera impresi=F3n: Excelente: Espacio =
sin=20
publicidad, gratuito y puedes <BR>> a=F1adir
los Google=20
Gadgets.<BR>> <BR>>
Pod=E9is mirar aca <A=20
=
href=3D"
m</A><BR>> =20
<BR>> Como ver=E9is s=F3lo hay un link a mi
WebSite y una =
panor=E1mica, no tengo=20
<BR>> tiempo para mas ahora
xD.<BR>> <BR>>
<BR>> =
Lucas=20
Sevilla<BR>> <BR>> <A=20
href=3D"
http://www.lucassevilla.info">www.lucassevilla.info</A>
<<A =
=
href=3D"
;<BR>>=20
<BR>> <A =
href=3D"
http://www.gestproyect.info">www.gestproyect.info</A>
<<A=20
=
href=3D"
BR>></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0009_01C725AB.EFDC5C60-- -
Blocking specific IP address' for iWeb made website
Hi,
I want to block IP address' that I don't want to access my website for security reasons. How do I do this? Is there any script I could use in the HTML snippet?Use .htaccess IP restriction by creating an .htaccess file with the following code:
ErrorDocument 403 http://www.example.com/403.html
Order Deny,Allow
Deny from 127.0.0.1
Deny from 127.0.0.2
Deny from 127.0.0.3
Allow from all
Enter the IP addresses you'd like restricted and place the saved .htaccess file in the directory on your server that you'd like restricted based on those IP addresses. Add additional lines for Deny from if you want multiple IP addresses restricted.
Creating an .htaccess file may be a little tricky for inexperienced users. On OSX you can use Terminal to enable Finder to display hidden files and then rename htaccess.txt to .htaccess locally before upload. Alternatively you can upload htaccess.txt to your server and rename it to .htaccess on your host after it's uploaded. -
I created site in iweb 08 and posted to netfirms... the pages are all loaded up but there is no nav bar, where the nav bar should be is only a small black dot on each page. How do I get the nav bar to load up and show? It was a disaster loading up my site as it changed the case of the letters and at first no pages were seen, so I had to go through and change the letters that were supposed to be cap, back to cap in every file. I don't know if this has something to do with it or not. The tech support doesn't have an answer. Please let me know if you have any ideas and solutions. Thanks bunches!
Here are links to the simple 7 pages....
http://www.rednosedesign.net/home.html
http://www.rednosedesign.net/about_us.html
http://www.rednosedesign.net/logos.html
http://www.rednosedesign.net/flyers_&_ads.html
http://www.rednosedesign.net/notecards.html
http://www.rednosedesign.net/business_cards.html
http://www.rednosedesign.net/contact_us.html -
i have made with iweb a website on my macbook, now i want to change it, through my imac, how can I get in the program , which is on the mac book. On both computer I have Lion
You need to transfer your domain.sites file from your MacBook to your iMac. This is the file where iWeb stores all info and can be found under User/Library/Application Support/iWeb/domain.sites.
Transfer this file from your MacBook to the same place on your iMac and double click the domain.sites file and iWeb will open it on your iMac and you can update your site from there too. -
After updating AVG anti-virus, I encountered a problem on Firefox. I would select a link from the drop down on the address bar but the page would not open after clicking on it. I would select it again, even double click, but the page does not open. I could only reach website by selecting google or yahoo from my dropdown on the most visited list and then click the website that I want to visit. I would like to do this in one step by just selecting a link from my history on the address bar and select a link instead of going to google and then writing the page I want to visit. What could be the problem? When going to the address bar to select a link to open, why does the site not open? Any help would be appreciated.
Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars] -
IWeb and Arles Image Web Page Creator
I've been using Arles Image Web Page Creator on a friends Windows computer to almost effortlessly make pages with thumbnails of many, many images. I have over a hundred yearbooks with about many pages each to turn into web pages and was wondering if IWeb can do the same thing as Arles, and, if not, can anybody recommend a Mac application that will. Thank you very much.
I have this problem as well. When trying to create a new podcast blog entry:
"The application iWeb quit unexpectedly after it was relaunched. The problem may have been caused by the 3ivxVideoCodec plug-in." -
How to display a music album in a iWeb created website on MobileMe
Hi There
I have several songs and some Music videos that make up a Music Album (mine that I have made myself do I have the copyright to them) that I want to publish on my iWeb created website (hosted on MobileMe)
How can I get the whole Album to import. I have try dragging the things from the media side bar, I have also just tried dragging the whole album direct from the iTune Library, but no matter what I try it displays all the songs and the video as separate files and wont import them as a whole album.
Can someone tell me how to get them as a whole album
Thanks
Jason
Message was edited by: Jason G Telford -- message was accidentally posted before it was completedDo you want to have the visitors play each of the songs and videos? You can use a flash based jukebox for the audio files and a video jukebox for the videos. You would only have to upload the files to your server once and then link to them there. With these methods the files don't load until you select the play button thus allowing the page to load much quicker.
Roddy's iWeb for Musicians site has a number of such examples on these pages: Music Players and Video LightBox Audio Jukebox.
Happy New Year -
Why can't I access certain websites, such as google or facebook, in any browser?
This started last night, and it is strange. I am unable to access a few websites, such as Google, Facebook, and the sign in page for my google account. I have tried Firefox, Chrome, and Safari all with pretty much the same results. I have reset the original settings in these browsers, cleared my caches and browsing data, ran the disk utilities and permissions check. And still the same results.
Two particularly peculiar things have been occuring.
In youtube, I am unable to sign into my account in two of the browsers, and in Chrome I am already logged in but the autoplay of my watch later playlist acts very odd. one the main skeleton of the website is loaded It will show the red bar of the video loading across the top, then instead of playing the video, it skips to the next one. It will continue down the playlist without playing any video whatsoever and marks the videos as 'watched' afterwards. I can still use Yahoo search with no problems.
Here is the really odd thing. When I tried to load youtube in Safari, which I almost never use, it sat and spun waiting for the website then in the end it took me to a 'get google chrome webpage;' this was the same in Firefox (see attached images). Note: the navigation urls are facebook.com and youtube.com, but the favicon shows the chrome icon and my homepage is not set on this. I also included the network traffic overview to show how 47 servers are being accessed via Safari with only three tabs, none of which have loaded. And Chrome is not my default browser.
Also, I have a network montitor that I watch during this and it is very busy going to many different websites accessing over 50 different servers. These are websites which some I recognize, such as chat.facebook.com, and some webservers that I don't recognize. But I don't have any of these open in any tabs and hadn't tried to get on these sites for days.
Two things which may have contributed to these anomolies:
I updated to OS X 10.9.2. It was downloaded two nights ago, and I told it to restart the computer in an hour as I went to sleep. I assumed that it was already installed, but when I opened the AppStore today, it still had to go through the install restart process. Since this update invovled changing how website certificates are handled, maybe my downloading without doing the proper restart install caused something weird to occur. It is true that all of the affected websites do use an https: SSL address. But if this is the case then why wasn't this issue fixed when I finally did a correct installation. And why is there so much traffic to websites on the browser activity that have nothing to do with the open websites in the browser.
The final thing is that I read about how Adobe Cloud accounts, over a few million, were recently stolen. When I was researching this I found a link that was supposed to show me if my account had been one of the compromised ones. I went to the website, http://www.geek.com/apps/how-to-check-if-your-adobe-account-was-hacked-1576194/ which led me to the website http://adobe.cynic.al/, and ( stupidly) entered my account email to search if it was on the list, only to realize after that this was not a legit adobe webpage. If memory serves me correct, the problems going to webisites was worse after I did this.
So, I thought I would bring this to peoples attention. I am now going to do the only thing left I can think of to try and repair this so I can watch my youtube newsclips and google searches again, and that is to do a complete reinstall of Mavericks and then a migration from my backup afterwards, Unless someone had a better idea. BTW I did go through all of my main accounts to websites, using a different computer, and changed all of my passwords.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ \(\2\)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caught bu|GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|SATA W|ssert|Thrott|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; d=`ipconfig getoption $(route -n get default | awk '/e:/{print $2}') domain_name_server`; [[ "$d" != "$o" ]] && n="not " || n=; Ps "DNS (${n}from DHCP)"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test will take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
How to report iWeb users website for Violations to iWeb's and Apple's Terms of Services?
I would like to report an iWeb users website for violating iWeb's & Apple's Terms of Services Policy.
The iWeb users website clearly visibly includes the Apple logo and brand "Made on a Mac" on all they're iWeb pages.
The iWeb users websites contains abusive nudity, etc. and is an escort site.
How and where should I report this iWeb users website?Thanks QuickTimeKirk
For the help and if it's not a TOS Violation then I appologize -
After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?
Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
-> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
* Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
* Change value from 0 to whatever you want over 0 (Default value is 50)
* click OK
-> Close the '''about:config''' tab and then Restart Firefox.
See this post:
* https://support.mozilla.com/en-US/questions/860894#answer-229574
Check and tell if its working. -
When i use any shortcut to access a website, firefox opens google website. how to correct?
suddenly, about 3 days ago, any time i click on a desktop shortcut to a website, firefox opens a google homepage. the only way i can use firefox to access web sites is to type a url into the address bar on the google page. all of my desktop shortcuts now open to google home page.
major problem is that desktop shortcuts don't show url until firefox opens to the webpage.
so unless i know the url and can type it into google homepage address bar, i can't access
any of the shortcuts on my desk top.Glad to hear it. Every once in a while scan again. Say once a month or so.
As you saw from the reports, one scanner picked up where another did
not. So use two or three scanners. Happy Computing. -
The google page fills the entire screen. I have no access to firefox and no ability to go to a website i want.
Try hitting '''F11'''.
Maybe you are looking for
-
Very Slow Broadband and Poor Customer Service
Hi, Since April we have been having issues with our broadband line dropping the connection and terribly slow speed (around 0.4Mbs). We have had 3 engineer visits changing the master socket, home hub, filter and even work done out in the road. Each on
-
I am looking for an app for my iPhone and iPad, equivalent to Font Book on the iMac. I would like to be able to download a variation of fonts to use in Pages. Does this exist?
-
Several years ago, I downloaded much music to my iPod (5th gen). I have since replaced my computer and iTunes no longer lists my music. I there any way to upload my music from my iPod to iTunes on my computer?
-
Is there a max size aperture library? Mine is over 800g and crashes, won't update to vault
Is there a max size aperture library? Mine is over 800g and crashes, won't update to vault
-
Active Directory - Lingering Objects
Hello, I'm having an issue with replication and I'm hoping someone can point me in the right direction. I have the Strict Replication setting enabled on all of my DCs. I am running into a problem with replication failures due to lingering objects.