IWeb moves pictures by itself, links do not work when publishing to folder

When I first started using iWeb i would save the page I was working on and then publish it to a folder so I could look at it in Safari and it used to work fine. Now when I do this the pictures come up and they are pushed up halfway off of the top of the page and you aren't able to scroll down all the way to see the bottom of the background picture that I have. Also, the links to the other pages of the site do not work after publishing it to a folder. If anyone has any advice I would greatly appreciate it!
17" Powerbook G4   Mac OS X (10.4.6)  

I uploaded it to a free host for now. here is the link: http://www.zendurl.com/garrett/cgi-bin/www.garrettramquist.com/Welcome.html

Similar Messages

  • Youtube Widget not working when publishing to folder.

    I am having trouble adding youtube videos into my site. I am publishing to a folder than uploading, and all goes fine except the youtube widget doesn't activate when uploaded. Any thoughts on why this is happening? I did a quick work around using html widget, but would rather it been clean and the iWeb way...
    example: www.gpstravelmaps.com/About.html
    Thanks, Aaron.

    Hi,
    I too have the same problem. I looked at your link and it seems that you have the problem solved as I could see the clip. How'd you do it?
    All the best,
    Tony

  • Dynamic drill link is not working when i substitute some parameters in Plus

    Hi Gurus,
    Dynamic drill link is not working when i substitute some parameters in Discoverer plus(Tools--->Manage Links--->Edit links--->Parameters options), when i substitute some parameters it working when i click on drill value the link is popping up to go another worksheet.For some parameters link is not popping up. Could you please give any ideas.
    Thanks & Regards
    Vikram

    Hi Vikram
    Oh gosh, me and my big mouth!
    Patch 5381032 has two references to issues with links. You might want to discuss your scenario with Oracle and ask them if this patch would resolve your issue.
    Another solution would be to upgrade to 10.1.2.2 (available as a patch on MetaLink) which has most of the fixes from all of the patches applied. Again I would advise you speak with Oracle Support as they are the only one who can actually confirm whether this particular issue was fixed in this release.
    Are you by any chance seeing zero numbers display as 00 and are you seeing any graying out of icons? If so, then patch 5345595 (sometimes referred to as 5345528) fixes this and is a good patch to apply if you haven't already done so.
    All of these patches require a password which can only be obtained from Oracle by raising a service request to Support and stating the issues that you have.
    Hope this helps
    Regards
    Michael

  • Links not working when published

    I know, I know, this topic has been discussed before but I am very very new at this and most answers I just don't understand (I am used to visiting not building sites). Anyway, I am having a **** of a time getting some links in my webpages to work (better said, most work, some not). I don't understand, I've checked all links, no problems (not even when published locally). But when I FTP it to my host something seems to get lost in the transfer. I've deleted the pages where this problem occurs and made new ones. Doesn't help. Does any one have any idea and know how to explain the answer to me in the simplest terms? I would be so very grateful!
    thanx

    The correct ftp settings would be your username and password and what you use to connect to your server. If you have already uploaded your site, then these settings would be correct. If using Cyberduck with incorrect settings, you would not be able to connect to your hosting space full stop.
    Anyway, you said that you were just uploading the contents? If this is the case, perhaps if some of your links do not work, then you have not uploaded all the files that you need to. If uploading the contents of your site folder, then when Cyberduck asks you to upload, or you click it under action at the top, it will ask you to select the files - normally you would go to User and then Sites and then click on your site folder. When this shows up, click on the first file that is shown and do a select all and this will then upload all the contents. Check to ensure that all the html pages are there, plus their relevant folders - these folders contain all the CSS - so for each html page their is a folder of the same name e.g. About Us.html and About Us folder. There are also feed files that need to be uploaded too.
    What you can try to see if it works is to upload your whole site folder and separate index file and see if the links work when you do this. Your url will be different if you do this, but just try it and see.
    The other problems when links do not work is that you could have either an image or another text box too near to the navigation menu or link that covers it up so that it will not work. Go into iWeb and check this by doing a command A to see placement and you can then move images and text boxes around if this is the case.

  • Picture hyperlinks not working when published? Please help....

    Some of the hyperlinks to my pictures do not work when I publish to my folder. I´ve tried to empty Safaris cache but it still doesn´t work. Please help me, pretty urgent....

    hi briebrie,
    this is common mistake, see my post in this thread:
    http://discussions.apple.com/message.jspa?messageID=4004970#4004970
    The work around is to leave iWeb default nav bar and header enabled, add your home made nav bar (outside/below of iWeb default nav bar).
    Then turn off iWeb nav bar and header when you are done.

  • ADF Tabe's Pagination link does not work when embedded in iframe

    Hi experts,
    When I embedded ADF table(with JSF) in iframe like below code, the pagination link does not work. Is it a known bug?
    <iframe width=100% height=500 src="http://rst-act3ct2.us.oracle.com:8888/test/faces/modify.jspx" frameborder="0" scrolling="no"></iframe>
    When I use <object> instead of <iframe>, the pagination works again. However, <object> could not be used in my project.
    Any idea on it?
    Thank you in advance.
    Regards,
    Tony

    Hi,
    if you are on JDeveloper 10.1.3 then chances are that the problem can be pointed back to the mismatch of HTML and JavaServer Faces. At least you should make sure you work with a recent JDeveloper 10.1.3 release
    Frank

  • My flash links are not working when it is www request

    Dear Friends,
    We have done one application for the mobiles..in that we have used flash xml menu. In my xml menu i have mentioned the urls with www. request.
    When its http://www.xyz.com menu links are not working.
    If its http://xyz.com  my menu links are working fine. Can you please suggest me once how can i achive this.

    How did you fix it?

  • " send link" is not working , when click on it, nothing happens, but Firefox 4.0 will work

    File --> Send link will not work after Update Firefox 4.0 to 8.0
    It is happening all the time.
    Before update, the 4.0 version will work.

    File --> Send link will not work after Update Firefox 4.0 to 8.0
    It is happening all the time.
    Before update, the 4.0 version will work.

  • All hyperlinks are not working when published

    All of the links work on iweb 09; however, when published some of the links are not working. To get an idea of what I mean you can go to the site, thinkwhatif.org and see it. Would someone be able to provide an answer how to solve it? I have unlinked and relinked too and that didn't work (at least the one time I did it).
    Thanks in advance for helping me figure it out.
    I am learning..

    Bonjour,
    It's a layout issue. Two of your buttons (who or what) are in the navigation part of your page (nav_layer), which is back layer of your page. In your page, the content (body_layer) overlays the bottom of this layer (nav_layer) where the buttons are.
    !http://i22.servimg.com/u/f22/09/02/44/99/layout10.jpg!
    Show layout (iWeb > View > Show layout) and replace the buttons in the content. As you can see , you 've got also a empty textbox in the content

  • The navigation menu does not appear when published to folder and my 12 photos are not on the site either

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John
    Message was edited by: BOURBAH

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • The navigation menu does not appear when published to folder and my 12 photos arenot on the site eitherr

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • Close window not working when publishing as HTML5 on Adobe Connect using CP8

    Hi all,
    I'm trying to get a button that closes the project/window at the end of a video. I am using CP8.
    I can get it to work when publishing as SWF to Adobe Captivate.
    It also works when publishing as HTML5 but not on an LMS (Adobe Connect).
    I have tried various methods including
    - On success execute a Javascript =  window.close()
    - On success - exit
    - On success execute advanced action = Assign cpCmdExit with 1
    I also tried adjusting the slide settings On Exit: exit and the publishing settings Project End Options: Action: Close project.
    Nothing works.
    Any ideas?
    Many thanks,
    Aimee

    Hi Aimee,
    Can you test this to close the course window:
    Insert 2 buttons or smart shape used as buttons (as Finish course buttons).
    On the first button apply an action to execute javascript and in the script window, use this script: parent.close()
    On the second button apply an action to execute javascript and in the script window, use this script: top.window.close()
    Upload the published project on your LMS and check if any of these works for you.
    Thanks
    Himanshu

  • Rollover Slidelets not working when published

    Hi,
    I'm using CP5.5 for a course that uses numerous rollover slidelets.  Everything works as expected when previewing the slides in Captivate however the rollover slidelets do not work when the course is published and viewed in a browser.
    Any idea what could be causing this?
    Thanks,
    Matt

    Your project file may be experiencing some corruption.  Did you insert each of these slidelets using the Insert menu or did you perchance just copy and paste them from the same one?  I've seen that practice cause issues sometimes.
    Try creating a new blank project and then insert a few test slidelets using the Edit menu.  Do they work when this project is published?  If so, at least you know your Cp install is fine.
    Try hiding slides in your project as per suggestions in this post:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
    It may be that the corruption is limited to one or more slides and you can resolve it by rebuilding those slides.

  • Link from QBE-report to form not working when published as portlets

    I've created a simple QBE-report where I've linked (using a LINK) keyvalues to a detail FORM. Query and linking and automatically display of selected record works fine in the App.builder, - but when I publish the elements as portlets and access the QBE-report as a portlet on a page, - the link fails, no keyvalues are passed to the detail form. It only shows up blank.
    What am I missing here?
    Thankful for any hint.
    Regards,
    Haakon Eide
    [email protected]

    This is strange, - made the same report again, this time as a sql-query (not QBE) - and linked the report and form together exactly as before - this time the link works when using the report as a portlet.
    The QBE-report generates empty parameterstrings (i.e. foo=&bar=&) when run as portlet on a page. Is this a bug?
    Running Portal 3.0.9 on iAS 1.0.2.2.
    -Haakon-

  • Some links are not working when i click on them

    I will click on a link and it loads and then nothing. The only way I can open it is to open link in new tab. This has been happening since the new updates. Very frustrating as I have to resort to Google Chrome in order to not have to deal with this. Lots of links will not open.

    Nothing in header. Email from booking.com. Richard

Maybe you are looking for

  • Check for null values in string, if no values, print blank

    Hi  I posted a question a few days back, after playing with functions I was able to resolve it, I just have one more problem, if the string comes empty, only blank spaces should be printed, following is my string and my fix:  My string:  SEV.ORI/9999

  • Quicktime and Itunes aren't opening up. Please help. Please.

    Hello to all who have visited this post. Basically i'm not very good with computers. So i apologise for the ''noob'' internet/computer knowledge. I bought my Ipod a couple of months ago. Everything was fine. I could transfer songs from computer to Ip

  • Portal Runtime Error when communicating from JSPDynPage to JSP Using Bean

    Hi ... I am pursuing this problem for quite sometime now. Even opened a high priority message with SAP. We are using a bean to communicate value between a JSPDynPage and a JSP. When trying to access the bean in the doProcessAfterInput of the JSPDynpa

  • Error Message : Reload Software 513

    I know various people are going to direct me to previous threads and topics about this, but i can assure you that ive checked and scoured the internet to no avail. To cut a long story short, I plugged my Curve into the computer, it asked me for a dev

  • Burning songs to DVD issue

    I am having problems backing up my music library on DVD. I am able to burn the material I want, however, it burns the individual songs onto to DVD as single files. Is there anyway to burn the files so that the albums are separated into their own fold