IWeb not recognizing MobileMe log-in, won't republish

Hello!
My iWeb stalled and needed to be Force Quit. Rebooting, it came up with the entire website needing republished, all pages showed red. But all content intact, so fine.
Clicking Publish entire site or any Publish, it says "log into MobileMe", which I am. I can't get around this, I've logged out and logged back in, but iWeb won't publish now and doesn't recognize I'm logged in. Help, what do I do?
I'm overseas, and need assistance to get this republished.
Thank you

Try the following:
1 - go to the System/MobileMe preference pane and log out of MMe.
2 - login with a bogus username and password, like "test" and "test". This clears the caches.
3 - login with your correct username and password.
4 - launch iWeb and try again.
OT

Similar Messages

  • Ipod nano not recognized by itunes and won't charge

    Ipod nano is about 3 months old, worked fine before with itunes, but now ipod doesn't start itunes, doesn't show up in finder, and doesn't charge.
    I have switched usb ports, reset the ipod, downloaded itunes 6. I downloaded ipod update, but computer doesn't recognize ipod so it isn't updated. I tried "restore", but again not recognized. I tried Isync but it can't find ipod.
    Do I need a new cable that attaches ipod to computer?
    powrmac   Mac OS X (10.4.6)  

    Hello,
    The cord might be the case, but first, try these suggestions:
    Try putting your iPod into disk mode, then try connecting it to your computer again...
    <a href="How to put your iPod into disk mode</a>
    Do you have a wall charger? If so, then try connecting your iPod to that, and does it charge, or not?
    Have you checked this link out?:
    <a href="http://docs.info.apple.com/article.html?artnum=60941">iPod doesn't charge correctly
    Does your iPod appear in "My Computer"? If so...
    iPod shows up in Windows but not in iTunes
    If not...
    iPod missing in "My Computer" or in iTunes
    Post back on what happens when you try these things out. I hope this helps!
    ~~Kylene

  • Plays & lights work but NOT recognized by Windows/iTunes & won't charge

    It's a shuffle 512mb from a few months back and worked perfectly until last week. It continued to play as usual, but is no longer recognized when i plug it into ANY computer (i've tried about a half dozen)! I've followed every suggestion and recommendation from both the Apple Support and the discussion groups relating to my problem though it seems no one has experienced my specific ordeal. I am quite limited as it is not recognized by Windows. I tried searching for it as a "media device" but nothing. All the fucntions and lights work while playing, but there is absolutely no response when connected to a PC. When this charge goes, i'll be without my tunes!
    Any help...
    Thanks
    Shuffle 512mb   Windows XP Pro  

    AppleNEve wrote:
    I double checked to make sure that the cable is not faulty and it's working perfectly.
    how did you test that ?
    anyhoo, you might want to give this a shot:
    +Hi, All,+
    +It works now, It suddenly stopped detecting due to unknown reasons, but try these steps.+
    +Restart the device without connecting to your pc and+
    +Connect to pc and restart again, I did this 2 times and it was recognized and its working fine.+
    +Best of luck.+
    here's the original thread: http://en.kioskea.net/forum/affich-17997-ipod-not-detected
    if still no joy, it could be that your Touch is a goner. if it is still under warranty, you should plan a trip to the nearest Apple store.
    JGG

  • Iphone 4 not recognized in Windows and won't charge

    My iPhone 4 suddenly stopped charging via ANY charge medium, connected directly to USB port with adapter, via an iHome-like stereo, nor will it work in a wall charger. Also, neither a Mac (10.7) nor will a Win 7 computer with updated iTunes recognize it. Every time I connect it I get a message "USB device not recognized and has malfunctioned..." I have already changed the battery out (it was already out of warranty) still not charging or being recognized. Any help resolving this would be far more than appreciated!!!!!!!!!! Thank you!
    ~J

    Clean the iPhone charging port with a clean dry toothbrush. See it this helps. If still problem, clean port with toothbrush and some Isopropyll Alcohol. Clean especially the pins which are on top of the port mid-rib.

  • IPod Touch not recognized in Windows & iTunes won't start unknown error -50

    I have been trying to fix a connectivity issue with my iPod touch for almost 6 hours now. I've read all over the iPod Touch forums and none of the solutions worked for me. I've installed and uninstalled iTunes multiple times and nothing seems to work.
    Also, earlier this evening iTunes was working but it wouldn't recognize my iPod touch although it would charge. Now that iTunes won't start I'm also having problems with charging my iPod and at no time, was my iPod ever recognized in 'My Computer'.
    Someone please help! I'm at my wits end without being able to use and update my iPod. All help/insight/suggestions are appreciated and thanks in advance!

    AppleNEve wrote:
    I double checked to make sure that the cable is not faulty and it's working perfectly.
    how did you test that ?
    anyhoo, you might want to give this a shot:
    +Hi, All,+
    +It works now, It suddenly stopped detecting due to unknown reasons, but try these steps.+
    +Restart the device without connecting to your pc and+
    +Connect to pc and restart again, I did this 2 times and it was recognized and its working fine.+
    +Best of luck.+
    here's the original thread: http://en.kioskea.net/forum/affich-17997-ipod-not-detected
    if still no joy, it could be that your Touch is a goner. if it is still under warranty, you should plan a trip to the nearest Apple store.
    JGG

  • IWeb not recognizing podcast exported from Garage band

    I've been sending my podcasts to iWeb for over a year. I used to host my site on MobileMe but switched to a WordPress site through GoDaddy last year. Regardless, I've always continued to send my podcast to the old iWeb site and pinged iTunes from there. Have had no issues doing so.
    When the podcast exports, iWeb has always prompted me/asked me which "blog" page I want to use for the new podcast. (Naturally, I chose my "podcast" page as the old site had multiple pages). Now, iWeb is not prompting that option, essentially not acknowledging that there is new content being exported in.
    Any ideas where the disconnect might be? I've redone the share/send podcast to iWeb process from GarageBand 5 times with no success.

    Did you ever figure out the answer? I am having the same problem.

  • Ipod nano 1st gen (not recognized by iTunes and won't resotre)

    My ipod nano 1st gen has been working fine up untilthis afternoon..I plugged it in as normal while running iTunes and I wanted to remove some music files t add new ones and all of a sudden it wasn't recognized by itUnes anymore, you can't resotre it on iTunes or manually and whenever I plugge it in the itunes shut down..
    It was working fine before that, I was able to add and remove songs on it..I also have Ipod Touch 5 that works fine no problems and UBS ports are ok as well (all other ubs devices work on them). I have the latest, newest version of Itunes instaled
    HELP
    Thank you

    Hey moni8181,
    If you are having an issue with your iPod nano not being recognized by your computer, I would suggest that you troubleshoot using the steps in this article - 
    iPod nano Troubleshooting
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • Jpeg files on camera are not recognized by iphoto and won't import

    Kodak EasyShare Z712 IS is connected via USB and recognized by iPhoto, however none of these files are importing because the files are unreadable and in an unrecognized format. An example file name and ext that is not importing is "100_2327.JPG".
    I do not have a card reader and currently the only way I can get photos from my camera onto my hard drive is using the USB cable.
    Thanks in advance for your consideration

    Had the same problem after ? upgrade (before everything worked well with my Canon EOS 450) Found out that import worked fine when connecting to my wife's iMac - so, it could not be the camera or formatting og the cameras memory...
    Problem was definitively located to connection via USB hub build in to Apple Monitor!!! When connecting to USB connector on keyboard, everything works well - connecting back to Apple Cinema Display (connected to MacBook) is reproducing the same error. I assume that the same may happen with other hubs? But not tested!

  • IWeb not recognized

    Trying to launch iWeb08 gives this message:
    "You can't open the Application "iWeb" because it is not supported on this architecture."
    I noticed this around the time I tried to install the 10.5.2 update so it may be related but not sure. Had 10.5.2 problems but those were resolved by running disk warrior and reinstalling the software, but it looks like I am still having iWeb problems.
    Other iLife 08 apps OK.
    Jim

    Reinstalled yet again (this time deleting current copy first) and downloaded update. Works now.

  • My ipod 7th gen is not recognized in itunes it won't sync, i have windows 8 toshiba laptop

    I need help my itunes is not syncing my ipod

    the message box says like this:
    An ipod has been detected but could not be identified properly. Please disconnect and reconnect ipod, then try again. If the problem persists, unisntall itunes then install itunes again.

  • My computer no longer recognizes my 7th Gen iPod Nano. "USB Device not recognized." What can I do to fix this?

    Hi!
    So here's what happened: My nano has been working just fine. I plugged it in this morning to my computer, and it automatically turned on, but instead of charging, it went to play music. I turned it off. However, it did not switch to charging mode. So I unplugged it, and then I plugged it back in. "USB Device not recognized." My iPod won't turn on anymore, and my computer simply does not recognize the nano.
    It may have gotten slightly damp yesterday as it rained a bit when I was walking home (though I kept it covered). When I got home, it proceeded to work for another two hours after that--then I turned it off. And this morning? It doesn't work, as described above.

    Try cleaning the connector on the bottom of the phone. Use a magnifying glass to see what is stuck inside, a dry toothbrush and/or wood or plastic toothpicks (nothing metal). If that doesn't resolve the problem your phone is broken.

  • MobileMe account not recognized on AppleTv.

    Hi All Expert's.
    I have just received my new AppleTv, but when I try to log into my MobileMe account, I get the message, that my account is not recognized! How can that be? My account is very much in function (and paid for), so why does my AppleTv not recognize my MobileMe account?
    +
    My AppleTv are not recognized in my iTunes. It does not show. Why? I can steam my iTunes and it's working, but shouldn't it be seen in my iTunes?
    Kind regards from
    Steen Pihl

    Pihl wrote:
    Hi All Expert's.
    I have just received my new AppleTv, but when I try to log into my MobileMe account, I get the message, that my account is not recognized! How can that be? My account is very much in function (and paid for), so why does my AppleTv not recognize my MobileMe account?
    what are you entering? you only need to enter your username (and not @me.com)
    My AppleTv are not recognized in my iTunes. It does not show. Why? I can steam my iTunes and it's working, but shouldn't it be seen in my iTunes?
    the new appletv is not supposed to show up in itunes, as it connects via HomeSharing.

  • Iphone not recognizing i'm logged in with same acct.

    I am trying to use my macbook to make calls.  Macbook air is on Yosemite, iphone 5 is on 8.1.  The problem is that when i go into settings-facetime, and try to turn on iphone cellular calls, I get the message "cannot turn on iphone cellular calls - Facetime and icloud must be signed in to the same apple ID to use iphone cellular calls."  I have logged out of and back into both facetime and icloud, done a hard reset on the phone, and still cannot get iphone cellular calls to turn on. Why is my phone not recognizing that I'm signed into both areas with the same account?  Thanks.

    I did multiple times, I'm logged on my iPhone and iPod and sometimes when I get a text the notification disappears as if someone read the text and when I point it out when I tell my friend about it then it stops. One time I didn't say anything to see if it would keep happening and it did and when I called it out again the notifications were normal again all of a sudden.

  • Is there a way to restore photos from Drop box to my desktop iPhoto in a large batch instead of one at a time? I tried and a zip file was downloaded but won't open. Says file format not recognized.

    Is there a way to restore photos from Drop box to my desktop iPhoto in a large batch instead of one at a time? I tried and a zip file was downloaded but won't open. Says file format not recognized. I see how to do it one at a time with the "download" button in Dropbox but that's so cumbersome for lots of photos.

    Have you tried these avenues?
    Contact us - Dropbox
    Dropbox Help Center
    Dropbox Forums
    Submit a help request - Dropbox
    OT

  • My iPod nano 5th generation is not recognized by iTunes. I did update, but still, it won't work. I don't want to uninstall the iTunes cos  I don't want to lose my music and audio books. What to do? It started after I updated iTunes.

    my iPod nano 5th generation is not recognized by iTunes. I did update, but still, it won't work. I don't want to uninstall the iTunes cos  I don't want to lose my music and audio books. What to do? It started after I updated iTunes.

    iPod appears in Windows but not in iTunes

Maybe you are looking for

  • WBS Elements - Cannot change status

    Hi Guys, When we are trying to change the status of a WBS element to " CLSD " , it is giving us the following error message " There are still open down payments for WBS XXXXXX ". Please advise as to how these down payments for the WBS be tracked and

  • Emulator suddenly stopped working

    Hi, recently I have encountered problem with emulator suddenly stopped working. I am using linux (Mandriva 2009.1), WTK 2.5.2_01 and Eclipse 3.5. The only thing I am getting is message "Running with storage root ~/j2mewtk/2.5.2/appdb/temp.DefaultColo

  • Rule based on a block

    Hi I have a block that is based on many tables, 4 actually. I'm using forms 10g release 1 and the database is oracle 10g. The block is very slow because the query is cost based. When I'm launching the same query with the hint /*+ rule */ the query is

  • Sound loop in a flv embeded video

    I have embedded an flv sound clip into my Flash file but can't seem to get it to loop. I'm sure there must be a straightforward way of doing this?

  • JSP Check. JSP is not responding after installation

    While installing e-buz I got an error for JSP Check. JSP is not responding after installation After that I just stucked. What might be the error. All system requirements were satisfied. MKS(I used cygwin, then MSVC, gnumake) Everything went fine till