IWeb not saving changes when published to folder

Hello,
I'm very new to iWeb and to the whole web-design in general. My problem is when working in iWeb, and I save (or publish, if it isn't the same) to a folder, it goes fine the first time. But when I republish (I use republish in order to save my project) the changes I've just made i'snt there. When I go to the folder to check my website from the, I can't se changes there. That's very anoying (or how it's spelled )
Here's what I find odd:
ONLY when I restart my computer, the changes are there, and I can see them.
Why is that, and what do I do?
Kind regrds
Palle
Denmark

This may be too late to help you, I've just started to work with iWeb myself and discovered that if you go to the File Menu, you should see the option "Publish Site Changes", Click that and it will save the changes.
I've also noticed that the pages in the list on the left are 'red' if you've made changes to them and haven't published the changes, and blue when you have published.
(I'm also publishing to a folder for now)
Elizabeth

Similar Messages

  • IWeb NOT showing changes after publishing

    I had 2 sites I created with iweb. I made some changes on one, but not only did it not show any changes after I published it but said there was an error. I could access the site when I entered my basic domain name, but not through iweb. I deleted BOTH sites and started from scratch. Saved my work and tried publishing at least 5 different times. It STILL shows my DELETED sites (which I can't even see on my computer because I DELETED THEM!). MobileMe account is current. Domain name current.
    Anyone else having these issues? ANy idea what to do?
    Thanks

    But did you delete your site folder from MobileMe too? It's all very well deleting your site from iWeb, but if you really want to delete it and start again, you also need to delete your site folder and index file from MobileMe. Log into MobileMe and then go to your iDisk and delete the files from there too and then re-publish from iWeb and your new pages should show.

  • Iweb not updating changes since moved to godaddy

    Today I switched from mobileme to godaddy and everything worked fine. Then I cancelled the mobileme account. Now when I make changes in iweb and save to a folder, the changes are not being saved in the folder. (I'm trying to change my contact info & delete my email address). The edited page appears changed in iweb, but when I look in the folder it created, the email address is still there. This is the process I'm using:
    1. Make changes in iweb
    2. Save changes
    3. publish to folder in iweb (on desktop)
    4. Using Fetch to upload to godaddy server.
    I get no error messages with iweb, Fetch or Godaddy. (In iweb site inspector, I changed site name to http://www.babysmithsite.com
    url contact page: http://www.babysmithsite.com/Contact.html
    Any ideas?

    Sorry I wasnt clear about this. What I was trying to accomplish was to develop a site that only family members could access (with user name and password) and that the bots couldnt sniff my email address.
    After everything was working on godaddy, I decided to change the email address on the site from my PERSONAL email account to a new one I got from godaddy.([email protected])
    1. Deleted the old email address from iweb. Added the new one ([email protected])
    2. Made new folder (site2) and uploaded that via Fetch.
    That's when the problems started. The new email address didnt appear on the site. After 4-5 hours, I decided to delete all email addresses from site for security reasons (bots). Finally at 11 pm last nite, I called godaddy and the new page (suddenly) reads correctly with just a phone number and not any email addresses. So now the bots cant sniff my site, but it's still not private. Godaddy says I cant do that with them. Aargh! Mobile me was so much easier but it's 3X more expensive and I only need it for this little family website. Seems like switching wasnt such a good idea. Thanks to everyone for all the help.

  • How to publish to an FTB server in iWeb 2 using the File ➙ Publish to Folder option??

    I was just given the following advice regarding publishing to an FTP other than MobileMe. 
    Web 08 does not have that feature (drop down menu to publish from "site" icon).  You will need to upgrade to iWeb 3 in iLife 11 in order to get that feature.  You can get iLife 11 at the online Apple Store while supplies last since iWeb (and iDVD) have been discontinued by Apple
    To pubish to an FTB server in iWeb 2 use the File ➙ Publish to Folder menu option and then use a 3rd party FTP client like Cyberduck to upload the site files.
    Follon-on question, can anyone provide more details on how to do exactly what was suggested?  I toyed with it and can only get it to publish to a folder on my desktop, but not to an external FTP.  (I have already purchased a web-host package, just need to publish to it!)

    Okay.  When you publish your site from iWeb to a local folder what you will get is one site folder - this site folder will have the same name as you gave your site in iWeb and one separate index.html file.
    Your site folder contains an index.html file as well as the separate index.html file.  You NEED both.
    What you need to do is firstly using Cyberduck or whatever, upload your site folder to your host into whatever folder you need to upload to on the server - could be 'public_html', 'htdocs' or whatever - this is your root folder.
    You then need to upload your separate index.html file to your server too, but this index file needs to sit outside your site folder because it needs to point in towards the index.html file that is in your site folder - this is the first page of your site.
    You don't delete or duplicate any index files - iWeb produces the two index files that you need when you publish to a local folder - one index file in the site folder itself and one separate index file that sits outside the site folder and points into the first page of your site. 
    Also, remember to call the first page of your site something like Home or Welcome, but DO NOT name it index.
    By the looks of things here you have not uploaded your index files correctly.
    What I would suggest that you do is start over - so open Cyberduck and connect to your server and go and delete your site folder and your other index file if it is still there.
    Go back to iWeb and publish to a local folder again and notice that you have both your site folder and separate index.html file.
    Now go and open Cyberduck again and connect to your server and note where you need to upload your files to.
    Now go and upload your Site Folder to your server and once this has finished go back and upload your separate index.html file, but this needs to sit outside your site folder.  If you do this, then your site should display okay - as long as your other index file is pointing into to the first page of your site it should display correctly.

  • IDVD 06 not saving changes?

    Greetings. I teach an adult ed class in iLife. Unfortunately, the lab has old single 533 G4s. When we use iDVD 06, the program is not saving changes made in the different drop zones, etc. We place elements in drops zones, tell the program to save, quit and relaunch...nothing saved.
    This problem was repeated by a student on his G5 at home.
    Any ideas?
    Thanks.
    Michael Colin
    Mac G4 Single 533   Mac OS X (10.4.4)   Problem on G4 and G5

    Hw much free space is left on the macs?
    Plenty. These are very small projects we're working on.
    Thanks for the response.
    Michael
    Mac G4 Dual 533   Mac OS X (10.3.9)  

  • Internet Explorer 10 and 11 not saving cookies when Roaming Profile used.

    Hi,
    We are using Citrix Xenapp 6.5 with roaming profile and IE9.
    I have tried to upgrade to IE10 and IE11 on a test Xenapp server, when we log off Windows and log back on again any website settings stored in cookies were lost.
    The cookies is stored in the roaming part of the profile. New in IE10 is the webcache file database that keeps track of cookie stored in the profile
    AppData\Local folder gets deleted when you log off, if you have a roaming profile, and when you log on again all coockies are rewritten. Same problem with IE11.

    Hi,
    Here is a workaround to make cookies work is to set a Group Policy Preference to set the registry value, please see detailed instructions in the following link
    Internet Explorer 10 not saving cookies when Roaming Profile used
    http://rcmtech.wordpress.com/2013/08/30/internet-explorer-10-not-saving-cookies-when-roaming-profile-used/
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Yolanda
    TechNet Community Support

  • Stocks App not saving changes

    My stocks app is not saving changes no matter what changes I make.  After making a change, I'll exit the app, re-enter and it defaults back to a whole bunch of stuff I didn't add.
    Can someone help me with this, I'm not sure where to even start!

    Nadia Bielawa wrote:
    This did not help at all.  I'm not about to restore my iPhone and set everything up again, there must be a simpler solution. 
    Th simple solution is restart.
    If that fails,  thenreset.
    If that fails, then restore from backup.
    If that fails, then restore as new.
    If that fails then make an appointment at the genius bar.

  • Blog Archive Webpart Does Not List Posts When Publish Date is About early months,years in sharepoint 2013

    I create blog posts . Their publish date are different from now and their publish date are the early months. For example i create 30 blog bosts in 15.08.2014. But 10 blog posts' publish date is 15.04.2013,20 blog posts' publish date is 15.03.2012. I can
    not see them in the blog archive part. There must be April 2013 and March 2012 in the archive part,but i can not see them.
    How can i see them in the blog archive webpart?
    When i create a blog post, what is the main issue about the date? What is the main issue about date about grouping them.
    How can i show the blog posts according to the publish date not create date? İs it possible?
    Can you help me please?

    It seems you created another thread for same issue. Let's wait for the response from original thread, instead of creating a new one.
    http://social.msdn.microsoft.com/Forums/en-US/2a3f7d99-c74b-4554-94bf-e597a88b5425/blog-archive-webpart-does-not-list-posts-when-publish-date-is-about-early-monthsyears-in-sharepoint?forum=sharepointcustomization
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • How do I remove old web site when publishing new site with same URL in iweb? Hit replace when publishing new iweb site (so we could have control over changes) but new site name is attached to old via a / after our www address we want to keep.

    I hit the replace when publishing the new iweb site (so we could have control over changes - last one was not an apple based site) but new site name is attached to old via a forward slash and underscore after our www address. Makes it very messy with a very long web address.  Original address now followed by iweb site name followed by name of first page? Went for iweb as not that computer literate - all going so well?! Cheers for help in anticipation. Have to get off to work now but be great end to week if we could be sorted tonight. Rupes

    Well yes of course, if you try and publish through iWeb there won't be an option to publish without your site folder which is exactly why I told you to download Cyberduck and use Cyberduck to upload your site to your server having published your site from iWeb to a local folder.  That is what you need to do if you don't want your site name to be included in yoru url.
    It would have been easier also if you had used Cyberduck initially to connect to your server and delete your old site yourself - at least that way you would have deleted the correct files rather than relying on your hosting service to do it and doing it incorrectly.
    Download Cyberduck and then select the publish to a local folder option from iWeb and then use Cyberduck to upload your site to your server, but rather than uploading the whole site folder and separate index file, upload ONLY the contents of your site folder and then your url will be http://www.domain.com/page_name.html.
    It really isn't rocket science!

  • IWeb is not making changes to published page.

    After making changes minor changes to my webpage and hiting publish.  iWeb tells me it's published and to visit the site.  Nothing has changed!  I saved the changes made, quit iWeb and restarted, hitting publish.  Nothing changes.  I have not changed text or anything other than my schdule.  Any ideas..... it's pretty important.  Thanks.

    You should read and heed this User Tip: Do not install MacKeeper
    OT

  • IWeb crashes when publish to folder.

    Hi,
    I'm having some difficulties with iWeb when I try to publish my site to a folder. My site contains among other pages, one that is quite large (a lot of text in mulitple textboxes).
    When I tell iWeb to publish to a folder (since I do not have .Mac) it starts thinking and when it's finished publishing the large file it crashes.
    I'm not sure wheter the problem is the large file or something else, problem is the crashing. Have not been able to publish my site!!! Realy anoying.
    Hopefully somebody got some suggestions.
    Thanx Mark

    might be interesting to copy the "domain" file so you can restore it, delete the suspect page and try to publish that. You can copy the orginal file back if needed.
    Good idea to backup that file once in a while anyway.
    user/library/applcation support/iweb/domain

  • The navigation menu does not appear when published to folder and my 12 photos are not on the site either

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John
    Message was edited by: BOURBAH

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • The navigation menu does not appear when published to folder and my 12 photos arenot on the site eitherr

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • Links changing size and not appearing normally when published to the web

    I can figure out what is happening. No matter what I do I can't get the 'main page' button to appear as it does in iWeb when published. Help!
    http://web.mac.com/andrew.santangelo/iWeb/Site/Booking.html

    http://web.mac.com/andrew.santangelo/iWeb/Site%202/Private%20Lessons.html
    http://web.mac.com/andrew.santangelo/iWeb/Site%202/Home.html
    http://web.mac.com/andrew.santangelo/iWeb/Site%202/Booking.html
    Here are the pages I'm having problems with

  • Edited hyperlinked shape images not hyperlinking properly when published

    At my website:
    www.trianglepolysteel.com
    I've tried to add and edit hyperlinked shape images at the top of the page, namely "The PolySteel Systems" and "FAQs". No matter what I do--bring to front, recreate a brand new image, copy and paste one I know works--the published version does not hyperlink properly. I unselect "make all hyperlinks inactive" in the hyperlink inspector pane, rollover my mouse to ensure that all buttons take me to the proper place, then click them to prove it. Works in iWeb, not on the published page.
    Does anyone know how iWeb creates the code? When I save changes I've made, does it rewrite code for the entire page, or does it plug in edits at the end of the existing code? When I go in to view source in safari, it looks like it put the two edited/added images in a different location.
    Help! Visitors/potential customers are missing a valuable link on my site.
    Bradley

    OT,
    Yes, each is its own image, as making one text box and hyperlinking each word/phrase results in the unchangeable (arrrgh!) grey underlined text that changes to red on rollover.
    I've already been experimenting with exactly what you mentioned. I just tried shrinking all the image boxes, without encroaching on the text, so they would clearly not overlap. I'm publishing to me.com for these experiments so I don't have to keep publishing the entire site to a folder, then ftping to my server. Here's the page I just experimented with:
    http://web.mac.com/bradleyoder/iWeb/Triangle%20PolySteel/WhatIsPolySteel.html
    In iWeb, all links are good to go, no overlapping, etc. Curiously enough, on this page, there are even more dysfunctional hyperlinks with those image boxes.
    Any further thoughts?
    Bradley

Maybe you are looking for

  • Trying to install 1st generation iPod Nano on Windows 7 OS laptop.

    When trying to open i Tunes installed from my original software CD, I get a message ""The files 'i Tunes Library.itl' cannot be read because it was created by a newer version of i Tunes." I have a 1st generation iPod Nano and a Windows 7 OS laptop. T

  • Link between Employee and Cost center and TCode CAT2

    hi all, can anybody tell me where is the link b/w a PERNR and Cost center (which infotype) ? if anybody has played with Tcode CAT2, please revert back !!!!!!!!! Any help will be rewarded !!!!!! Thnx, Preeti

  • Customer exit doubts

    Hi everybody, Can anyone tell my doubts pls. I need to write customer exit using RSR00001 for that tell me the steps and sample code for execute query using any date variables like system date or last week etc. i do not know the steps to write exits.

  • How to run wrap command

    Hi, I want to run wrap command for encryption. I am a bit confused about syntax. Can anybody help. Prashant....

  • Basic JPA native query design question

    Is this ok to reuse the lookup of the EntityManager and not close it? //Database call try { Query query = Resource.getEntityManager().createNativeQuery(sqlStatement); results = query.getResultList(); catch(Exception pExc) { LogTool.error("Error runni