IWeb not updating published status within application

I'm having a strange iWeb problem that just started up within the last day or so. When I publish any of the sites within my domain (I have seven separate "sites" that are all part of the same domain file) the updates get published to my site, but the icons in iWeb do not change color back to blue. This happens whether I choose to publish changes or publish all.
Another symptom of this problem is that my published site (http://www.adamreisinger.com) does not reflect the changes online until about five minutes after iWeb gives me the dialog box that my site has been successfully updated.
The only thing I've changed on my system recently is applying the last round of software updates, including the iLife update. I've tried trashing the application preferences and the iWeb cache and re-publishing, as well as logging out and logging back into MobileMe within System Preferences.
Any help in this matter would be greatly appreciated.

Thanks for the suggestion. I tried the steps you outlined, and unfortunately the problem persists. Also, because the files were deleted from the Web folder the iDisk, iWeb is now under the impression that EVERY page has been modified, which has actually increased my publishing time.
Some other troubleshooting steps I've taken to try and narrow down this problem:
- I've tried publishing the domain from a newly created user account on the same computer (MBP running 10.6.2 and all latest updates applied)
- I've tried copying the domain file to a different computer (one that has not had the latest iLife support update applied) and publishing from there
- I've tried publishing to a different MobileMe account (a test account set up by Apple)
- I deleted an entire site from the source list in iWeb (one that, fortunately, was not needed)
After all these steps -- tried individually -- the issue persists.

Similar Messages

Menubar is not updating based on active application.

Hi,I am using iMac with 10.7.4 mac os.My problem is menubar is not updating based on active application.And finder menu bar is appearing when i open the finder.And on thta time if i select "About my mac" or "Force quit" then that didn't give any response.At same time when i open any application like firefox or anything that finder menu bar is apper but not responding.And another probelm is at the time of login i entering the password and submitting,it's opening the desktop and again total screen will be becpme white and showing the activityindicator.Sp please tell me what's the main problem.And how can i solve these problems.

Try restarting your iMac in safe mode (holding down the shift key while restarting) then see if you have the problem. If not then use disk utility to repair your permissions. Take a look at this link, http://support.apple.com/kb/HT1452

IWeb not updating site changes, even overnight!

Hi iWeb-experts,
Having problems with iWeb and have waded through the site and other forums and yet to find a solution.
Site is marccheckley.com. I successfully moved the site before MobileMe closed shop and made updates to the site a few months back.
Now I'm trying to upload further changes but iWeb has stopped functioning. I get no status that the site is being changed, as it was previously. And I know this has not happened as I have it linked to my Facebook and no "updated website" has popped up on my Wall.
I even left it overnight to update website changes and still nothing. Even clearing brower's cache etc. I tested the FTP connection all good and nothing been changed since my last updates a while back.
All 'pages' of site remain red, not updated in iWeb.
Really not sure what's happened. Nothing but probs since the closure of MobileMe, my podcast is still on hiatus due to linking problems, now website issues with iWeb.
Anyone have an idea and fix?
Always appreciated.
Marc
iWeb 3.0.4
Macbook Air (Dec 2011)
OSX Lion

If you are using the iWeb FTP to upload make sure the box next to "Update my Facebook profile when I publish this site" is unchecked. Checking this box prevents the FTP from working.
Also make sure you have no bad file names with spaces or special characters - particularly image files. This will halt the upload process.

IWeb not updating web site.

iWeb started out working okay. I kept a blog and updated it. Then I went on a trip. Even though I had wireless internet the whole time, updating kept failing. No error message, but the update clock would stop after being about one-quarter filled. When I came home, there was no difference.
Although this started months ago (before the whole .Mac to MobileMe changeover), I do believe my recent inability to update my web site is related to it. The reason is that although I can access the last updated version of my web site at "web.me.com/myaccountname", when I go to my current iDisk and open the "sites" folder, it's empty!
Is it possible that my account has not yet been changed over to MobileMe yet? I have already installed all OS updates, including the MobileMe update. My account logs in fine.
Any ideas?????

Hey maybe you need to replace only the page that was updated, do not change all the published site, try I just did it and it work I have change a page and a file to be downloaded from the web site, now I can see the changes live on the web. this is what I wrote to others.
Hey I have found not a solution but a way to publish without iWeb, Just did it and I have seen the changes on the web site. If you guys want to try:
I have published my updated web site to a folder on my desktop. then open iDisk from the web (where my web sites files are stored for everyone else to see) then open both windows side by side and only replace the files of the updated pages from the desktop folder to the iDisk folder, there is always a file and a folder with the same name. I just replace them, I then checked on the web and Woalah! changes were made. Well... it did work for now without iWeb, not sure if is the right thing to do but if you are brave enough to follow this go ahead and go to bed as I will until the bug is fixed (hopefully tomorrow) then we can go back to normal. Hope is clear and it help! Rog

Iweb not updating pdf links

I am using iWeb 3.0.2 and have made a site with many pages and links. Many of the links are to pdf pages. I have recently changed many of the pdf files - but kept the names the same. After publishing the updated site the pdf links still open the old versions of the pdf files. Other links just don't work at all - as if they are not links.
I have tested the site in Safari - after emptying the cache and Firefox.
Any ideas? Help is needed soon. This site is for my department and it is supposed to go on line before the holidays.
The site can be looked at here: http://web.me.com/wijtman/VAS/Home.html

How did you add the links to the pdf files to the page? Did you use the Inspector/Link/Hyperlink pane and use the link to file option? If so I've found that that often does not update as you're experiencing.
I suggest you do the following:
1 - Create a folder titled pdfs and put it in your iDisk/Web/Sites folder.
2 - place your pdf files in that folder.
3 - link to the files as An External Page
Click to view full size
with the following URL:
http://web.me.com/wijtman/pdfs/file_name.pdf
Now when you want to make a change to a pdf file just upload the new file to the pdfs folder on your iDisk replacing the old file. There is no change required to the web page using iWeb.
OT

Captivate 6 Not Updating Publishing Title

Captivate 6 is not updating the title when publishing. It IS updating the publishing location.
I've tried doing "Save As" in a totally different folder, and it's still remembering the publish title from the original CPTX file that i copied.
I've also tried a techniques from this forum, but to no avail.
http://forums.adobe.com/thread/747950
Anyone else experiencing this?
Micky

Hello Micky ,
If you have already tried all the steps from the above thread shared by you, please try recreating the preferences:
Location for Captivate Preferences folder is:
Windows 7: C:\Users\[user name]\AppData (hidden folder)\Local\Adobe\Adobe Captivate 6 folder
Windows XP: C:\Documents and Settings\[user name]\Local Settings\Application Data\Adobe\Adobe Captivate 6 folder
Mac: /Users/[user name]/Library/Preferences/Adobe Captivate 6 folder
You will have to close the Captivate 6 first and then rename the Captivate 6 folder to Captivate 6_OLD.
PS: Recreating the preferences will reset all customizations, workspace and settings.
Thanks and Regards
Himanshu Satija

OOTB Approval Workflow on Custom List does not Update Approval Status

I have a custom list on which I've required content approval. I then created a workflow instance from the "Approval - SharePoint 2010" template. For this workflow I have selected "Update the approval status after the workflow
is completed (use this workflow to control content approval". When I approve the list item via the workflow task item the status of the item is not updated but stays at pending even though the
workflow shows "Completed" with the Outcome of "approved". Is this the expected behavior, i.e. does "Update the approval status after the workflow is completed (use this workflow to control content approval"
not work for custom lists? Does it work on any of the lists?

Hi Kalos1840,
If you check "Require Content Approval" setting, only the way above can update the approval status due to the approval status is for this approval workflow. As this approval workflow cannot achieve your demand, I recommend you un-check "Require Content Approval"
setting and create a custom workflow such as the OOTB Approval Workflow or SharePoint Designer workflow.
Here is the steps of a SharePoint Designer workflow:
1.Go to your custom list , click Create a Workflow in SharePoint Designer.
2.Add a “Start a task process” action in your workflow.
3.Click “these users” and Start a Task Process edit page will pop up.
4.In the Participants field, input your approvers based on the order of approval.
5.In the right of Participants field, select “Serial (one at a time)”.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Change_connection does not update entire info about application

The procedure change_connection does not update the entire info of the about application window. When I change my connection the connect string in the about application window still shows the old connection string.
I added the line g_connect_string := get_application_property(CONNECT_STRING);
to the procedure change_connection between the lines
-- Reset user preference settings for new user connection
qms$user_prefs.init;
and the lines:
-- The menu must be replaced because the new user might have other security privileges
Now the connect string will change in the about window.

Mark,
This has been implemented in Headstart PATCH6530_for_6i and PATCH6530_for_9i.
Regards,
Marcel

IPod 4th Gen not updating "played" status.

Hi, recently I'm having a problem with my Ipod touch 4th Gen. It works fine, plays music and videos normally, but it does not update the "last played" status, nor "last played date". This is a problem because I sync my videos based on "most recent not played", and I have some smartlists that make use of that statur or date too.
This happened once before I upgraded from iOS 5 to Six, but apparently was corrected; however, since I upgraded to iOS 6, none of my played items is being updated. Could it be because of the iOS upgrading, or maybe there is something else I'm missing?

iOS: Device not recognized in iTunes for Mac OS X
It will not show up in Finder/Spotlight search

CLEAN_REQREQ_UP not updating the status of all confirmations.

Hello All
We have scheduled the cleaner report as a job running every 2 minutes.
This job changes the status of the confirmations from 'Approved' to 'Transmit to backend system'.
However the job doesn't process a few confirmations randomly.
In such confirmations, the status remains as ' Approved'.
There is no issue for replication for such confirmations in the backend.
This happens on 30 % of all confirmations.
All these confirmations are coming from an interface and the following sequence occurs
1) MFG Batch user creates Confirmation in SRM
2) WF Batch user sets the status as Approved
3) Job Batch user( CLEAN_REQREQ_UP) updates the status to 'Transmit to Backend system'
I am trying to find out why the job wont process these confirmations.
Regards
Kedar

HI
for eg,
when we do confirmations in SRM
message type MBGMCR and RFC takes GOODS CONFIRMATION / SERVICES data to .ECC
and BBP_GET_STATUS_2 job bring the informations of ECC GR status and update in SRM.
bbp_docuemnt_tab get entries of srm confirmation data and clears clen req up table (po+confirmation number).
clean job must clean this PO+confirmation line in the bbp_docuemnt_tab table.
check your PO number in BBP_DOCUMENT_TAB TABLE.
i need to check it up.
br
muthu

Since iLife '11 upgrade, iWeb does not update/publish my website.

It shows progress and says it publishes, but when I go to the website after iWeb confirms the site has completed publishing, none of the changes are made. Please help.

Here's what I've gathered so far....It publishes to the FTP just fine. I can preview the pages from the FTP accurately as a local file. I use the exact same path from the local file to pull up the second page on the site, and it pulls up the old page. BUT, when I use the home page (or index) path to pull it up online, it says "Not Found".
I gather that for some reason the site is not publishing accurately, as it did before. All the files show up on the remote ftp site, but something is wrong.

IWeb not updating to MobileMe

hello everyone. I have never posted to this forum before and I am relatively new to macs, so please go easy on me if I come off sounding like an idiot.
I have a webpage that I had previously published through my .mac account. After the update from .mac to MobileMe, my computer can't seem to publish my page. When I click the menu items in iWeb, there are still options that say "publish to .mac" and "publish all to .mac" and NOT "publish to MobileMe." I have checked for new updates to the iWeb software, but the software updater says everything is up to date.
Is there something I need to change within iWeb to make it communicate with MobileMe or is this a central Apple issue? I should mention that I have been able to log into MobileMe and my addresses, calendar, etc. has updated to MobileMe just fine.
I appreciate any and all suggestions. Thanks in advance for your help!!

These issues are happening for everyone it seems. The whole reason I subscribed to the .Mac (MobileMe) service was to be able to use iWeb and publish my own personal site. I'm not a big fan of the Web 2.0 (Facebook, MySpace, etc.), so using this service was a no brainer for me to keep my family and friends updated in the lives of my boys and I without all the work and drama of the other sites.
Anyhow, I know that although my pages are actually publishing, it is quite annoying to be getting the error messages. It's just a constant reminder that Apple still doesn't have things working the way that they should.
I'm sure they will have a fix soon as I'm sure that there are quite a HUGE number of customers out there who are actively seeking out other alternatives.
This situation is annoying, disappointing, and very unprofessional on Apple's part and I'm just a Ms. Everyday Person. I can only imagine these emotions are intensified for those of you who do rely on these services for professional purposes.
~C

IWeb not updating photos

When I update photos on iWeb (I have a Photos page with 9 albums), sometimes the published website "ignores" the updates. Although I save and update a new photo, it just doesn't appear on the website. This doesn't happen every time, or with every album. And sometimes even if I rearrange the albums, to try to give iWeb an extra "push", it doesn't see that change either. Forced updating of the entire website doesn't fix the problem. Any ideas? Updates work fine on other pages, and on some photo albums. I'm running iWeb 3.0.4 on Lion, and the website is not hosted on mobileme. The url is http://www.hsvbrushstrokes.com/HSVBS/Home.html

First you need to make sure you are emptying the browser cache before visiting the published site.
To make sure that iWeb is actually adding the images, publish you site to a local folder...
http://www.iwebformusicians.com/iWebMusicWebsite/MusicWebsiteBuilding.html
... and launch it in the browser by double clicking the index.html file. Are the photos present in this version of your site?

Changes are not updated in Vistex BSP application

Hi Friends,
Iam working on VIstex BSP Applications. I have a problem with data update.
I create a new Agreement Request using existing Agreement in BSP. In the Agreement Request I have different Rules and each Rule has some records in it. When I click on Save, initially all the records are alloted a temporary variable $$000000XX (XX is some number). After Save, from the Number Range object, these records are alloted permanent numbers. Up to here it works fine. When I go to any of the Rules tab and add a new record to that then this record is not saved properly. I mean when i go to the ECC (backend), it shows the newly added record, but when i click on the same tab again in BSP i could see in debugging, that
the record still has a temporary number to it. So it always inserts a duplicate record in ECC.
The issue is after i add a new record in BSP, Save the Agreement Request and come out of the transaction, then it saves properly. But when i add the record, Save and go the same tab again and change something to the newly added record, it is creating duplicates. And this is because it is not saving the record properly.
Also if I just come out of the BSP page and load it again after clicking on save, the save is done properly and no duplicates are created if i modify the newly created record.
Any suggestions to solve the issue will be appreciated.
Thanks & Regards,
Raju
Edited by: Narayana Raju Sampathirao on Oct 6, 2009 3:02 AM

Looks It's a Refresh issue part of BSP

0FI_AR_4 not updating item status

Hi !
I am facing a problem with extractor 0FI_AR_4. When loading a delta load with clearing docs the status of the document cleared by this delta is still O.
I can find the clearing doc in the ODS, but the cleared one is still the same, with blank clearing doc and clearing date.
Is this correct ? Shouldn't the cleared doc appear as cleared with its corresponding cleareing doc and clearing date ?
edit: I have just found an OSS Note 1051099 - BUC: Change to clearing information not reported to BW, but I know for certain that the clearing process is made through SAP standard transactions and not the program mentioned in the note. But the problem is the same. The chage of status that should update the record in the ODS is not beign generated, so I have only two records in PSA, one for the original document and another for the clearing doc, but there should be a third one for the update of original doc with status changed to C. Am I right ? Has this happened to anyone else out there ?
Please tell me where to start looking for answers !!
Regards,
Santiago
Edited by: Santiago Reig on Mar 11, 2008 7:32 PM

Hi..
For FI datasources you will not be able to see any data in the delta queue..
Data will get populated in the delta queue during extraction..
After init...it writes the entries into the time stamp table BWOM2_TIMEST in the SAP R/3 System with a new upper limit for the time stamp selection...
Depending on that data will get fetched from the table BKPF based on creation date (CPUDT)...
For 0FI_AR_4 (AR- line items )Selections are made from tables BSID/BSAD (Accounts Receivable)
This is for new entries.......
For changed records data will get fetched from the table BWFI_AEDAT , depending on the time stamp table BWOM2_TIMEST....
Check the following blog :
/people/swapna.gollakota/blog/2008/01/14/one-stage-stop-to-know-all-about-bw-extractors-part1
Regards,
Debjani.........

IWeb not updating published status within application

Similar Messages

Maybe you are looking for