IWeb on Windows - tips on how to have this load better
I've built a personal site, but on a pc it seems to load in an odd way - with quite a delay and gray boxes in the place of images. Any tips on how to configure it so it works better on a pc? Here is the site: http://web.mac.com/lorriestapleton/iWeb/Lorrie%27s%20Site/Cyber%20BookClub.html
Lorrie the graphics/bookcovers on your welcome page are PNG's.
IE loads these AFTER all other items on your webpage have loaded.
People much more smarter than me have answered this question here:
http://discussions.apple.com/thread.jspa?threadID=683147&tstart=15
Succes
Harry
Similar Messages
-
I have a Macbook Pro 15" that is three and a half years old. Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?
I have a 250 gig drive and try to keep at least 100 gigs unused at all times, 4 GB 667 MHz DDR2 SDRAM memory, back up with Time Machine and CrashPlan, and have OS X 10.7.3.
This was my first Mac since an old Apple II GS. After that I used PC's and got really good at reformatting, replacing drives, reinstalling, defragging, resolving software conflicts, etc. Since switching back to Macs (five in my extended family now), I haven't had to do any of those things. So, although, the cost is three times as much, the aggrevation has been ten times less.
I'm retired and living on a fixed income and would therefore like to keep this computer running as opposed to constatntly upgrading.
That said, any tips?
Thanks
It does have a crack on the left of the screen case about 3/4'' up from the bottom. I've posted that as another question.Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Adding more RAM, if feasible, and a new, faster hard drive may also help pep it up a little. -
hi there. my phone was stolen and i have heaps of notes that i need to access, but i'm not able to access my notes via the cloud, any tips on how to do this? thanks
i'm not able to access my notes via the cloud
If your notes sync with your icloud account, you can access them at www.icloud.com -
Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?
Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater -
I'd love your advice/guidance!! I need to embed (not link) videos in a Powerpoint doc so that anyone (mostly PC users)can open and use from a jumpdrive without needing internet connection. I was considering using keynote and exporting as a PPT.
Or is there a way to do this in a newer version of Powerpoint? (i'd rather stick with keynote) what would that be the best option?
Any Instructions/tips on how to accomplish this? Thank you in advance for taking the time!
I have an old version of PPT on my g5 tiger tower. (microsoft office version doens't owrk on the macbook pro.)
i have iWork09 on both computers.I'd love your advice/guidance!! I need to embed (not link) videos in a Powerpoint doc so that anyone (mostly PC users)can open and use from a jumpdrive without needing internet connection. I was considering using keynote and exporting as a PPT.
Or is there a way to do this in a newer version of Powerpoint? (i'd rather stick with keynote) what would that be the best option?
Any Instructions/tips on how to accomplish this? Thank you in advance for taking the time!
I have an old version of PPT on my g5 tiger tower. (microsoft office version doens't owrk on the macbook pro.)
i have iWork09 on both computers. -
During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation.
"An Error occured during intstallation of Assembly "Microsoft .VC80.CRT type="win32". version="8.0.50727,6195", public Key Token="1fc8b3b9a1e18e3b, processor Architecture'+x86'". This is all followed by some more text and code HRESULT:0x80070005
Ive tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!
Anne MarieProbably should've searched around a bit more. Just saw a similar forum post to my own in which redownloading and burning solved another user's similar issue. As of now I've redownloaded the 64-bit ISO, burned it, and so far so good (at 72% extracting files). I will repost here if it was a success in hopes that other users with a similar issue find this and benefit from it. Hope I didn't just waste anyone's time with a question that had already been answered (haha)
-
when i open firefox, before start show window [JavaScrip Application] title that have this text:>>TypeError: urlbar is null
Try to boot the computer in [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows Safe Mode with network support] (press F8 on the boot screen) open firefox and see if that happens again.
-
I can't connect to I tunes with my I pad 3, it say cannot connect to I tune store, any tips on how to overcome this issue, thanks.
Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
Suggestions on how to make this coding better?
Hey everyone, I was just wondering if anyone had any suggestions on how to make my code better. It's for a project and I want to get a good grade on it. It works fine but I just want to see what everyone thought before I hand it in.
import java.io.*;
import java.util.StringTokenizer;
This class process the input expressions containing rational expressions and proecesses them and then outputs the results.
@author *****
@version 1.0
public class Proj1
private static String buffer = null; //User input
private static BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
private static PrintWriter outfile = null;
private static int totCount = 0, goodCount = 0, badCount = 0; //Total, Valid, and Invalid counts
private static boolean fileInput = false; //File to read data
private static boolean fileOutput = false; //Output for the data
private static boolean screenOutput = false; //Output so the user can view it
private static String outFile = null; //File for output
private static String inFile = null; //File for input
Main method
public static void main (String[] args) throws Exception
Proj1 proj1 = new Proj1();
proj1(args);
runs the program
private static void proj1(String [] args) throws Exception
if (args.length == 0)
printBanner();
System.out.println("\n" + "\n" + "Please enter an expression, or type quit");
do
screenOutput=true;
BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
processData();
}while(!buffer.equals("quit"));//exits if quit is entered
if (args[0].charAt(0) != '-')
badOption("Invalid Option Specified ");
for(int i=1; i<args[0].length(); i++)
switch(args[0].charAt(i))
case 'f': fileInput = true;
break;
case 'o': fileOutput = true;
break;
case 'b': fileOutput = true;
screenOutput = true;
break;
default: printBanner();
invalidOption("Proj1: Invalid Option Found: " + args[0].charAt(i));
if(fileInput && args[0].length() == 2)
screenOutput = true;
if(fileInput && !fileOutput)
if(args.length == 1)
badOption("No Input File Specified.");
else
File inFile = new File(args[1]);
if(!inFile.exists())
nonExist("Input File " + args[1] + " not found");
br = new BufferedReader(new FileReader(args[1]));
printBanner();
processData();
closeFiles();
if(fileOutput && fileInput)
printBanner();
if(args.length > 2)
outFile = args[2];
else
if(args.length > 1)
outFile = "proj1.dat";
noOut("No output file specified , defaulting to proj1.dat");
inFile = args[1];
br = new BufferedReader(new FileReader(inFile));
processData();
closeFiles();
if(fileOutput && screenOutput)
printBanner();
if(args.length == 1)
outFile = "proj1.dat";
noOut("No output file specified, defaulting to proj1.dat");
System.out.println("\n" + "\n" + "Please enter an expression, or type quit");
BufferedReader stdin = new BufferedReader(new InputStreamReader(System.in));
processData();
closeFiles();
else
outFile=args[1];
System.out.println("\n" + "\n" + "Please enter an expression, or type quit");
br = new BufferedReader(new InputStreamReader(System.in));
processData();
closeFiles();
Processes the input data by the user by doing the specified operations and then displays the output
private static void processData() throws Exception
if(fileOutput)
outfile = new PrintWriter(new FileOutputStream(outFile), true);
else if(fileOutput && screenOutput)
outfile = new PrintWriter(new FileOutputStream(outFile), true);
buffer = br.readLine();
while(!buffer.equals(""))
StringTokenizer reader = new StringTokenizer(buffer);
int count = 0;
String number1 = null;
String number2 = null;
String op = null;
boolean valid = true;
boolean secondNumber = true;
while (reader.hasMoreTokens())
switch(count)
case 1: number1 = reader.nextToken();
break;
case 2: op = reader.nextToken();
break;
case 3: number2 = reader.nextToken();
break;
count++;
if(number1 == null || number1.equals("quit"))
printSummary(goodCount, badCount, totCount);
closeFiles();
if(number2 == null)
secondNumber = false;
char character;
int position = 0;
String s = "0123456789/-";
for(int i = 0; i < number1.length(); i++)
character = number1.charAt(i);
position = s.indexOf(character);
if(position == -1)
valid = false;
if(secondNumber)
for(int i = 0; i < number2.length(); i++)
character = number2.charAt(i);
position = s.indexOf(character);
if(position == -1)
valid=false;
int denomin2 = 0;
int numer2 = 0;
String n1 = null;
String d1 = null;
int izerCount = 0;
StringTokenizer st2 = new StringTokenizer(number1,"/");
while(st2.hasMoreTokens())
switch(izerCount)
case 1: n1 = st2.nextToken();
d1 = "1";
break;
case 2: d1 = st2.nextToken();
izerCount++;
int numer1;
int denomin1;
int tokenCount = 0;
if(valid)
numer1 = Integer.parseInt(n1);
denomin1 = Integer.parseInt(d1);
String n2 = null;
String d2 = null;
if(secondNumber)
StringTokenizer st3 = new StringTokenizer(number2, "/");
while(st3.hasMoreTokens())
switch(tokenCount)
case 1: n2 = st3.nextToken();
d2 = "1";
break;
case 2: d2 = st3.nextToken();
tokenCount++;
numer2 = Integer.parseInt(n2);
denomin2 = Integer.parseInt(d2);
RationalNumber z1 = new RationalNumber(numer2, denomin2);
RationalNumber z = new RationalNumber(numer1,denomin1);
RationalNumber z1 = new RationalNumber(numer2,denomin2);
boolean lt = true; //whether the first number is less than the second
boolean gt = true; //whether the first number is greater than the second
boolean eq = true; //whether the first number is equal to the second
boolean le = true; //whether the first number is less or equal to the second
boolean ge = true; //whether the first number is greater than or equal to the second
boolean zeroDenom = true; //whether the denominator is zero
if(denomin1 == 0 || denomin2 == 0)
zeroDenom = true;
badCount++;
else
zeroDenom = false;
if(!zeroDenom && secondNumber)
if(op.equals("+"))
RationalNumber z2 = z.add(z1);
if(screenOutput)
System.out.println(buffer + " = " + z2.getNumerator()+ "/" +z2.getDenominator());
if(fileOutput || fileOutput && screenOutput)
outfile.println(buffer + " = " + z2.getNumerator()+ "/" +z2.getDenominator());
goodCount++;
else if(op.equals("-"))
RationalNumber z3 = z.sub(z1);
if(screenOutput)
System.out.println(buffer + " = " + z3.getNumerator()+ "/" +z3.getDenominator());
if(fileOutput || fileOutput && screenOutput)
outfile.println(buffer + " = " + z3.getNumerator()+ "/" +z3.getDenominator());
goodCount++;
else if(op.equals("*"))
RationalNumber z4 = z.mlt(z1);
if(screenOutput)
System.out.println(buffer + " = " + z4.getNumerator()+ "/" +z4.getDenominator());
if(fileOutput || fileOutput && screenOutput)
outfile.println(buffer + " = " + z4.getNumerator()+ "/" +z4.getDenominator());
goodCount++;
else if(op.equals("/"))
RationalNumber z5 = z.div(z1);
if(screenOutput)
System.out.println(buffer + " = " + z5.getNumerator()+ "/" +z5.getDenominator());
if(fileOutput || fileOutput && screenOutput)
outfile.println(buffer + " = " + z5.getNumerator()+ "/" +z5.getDenominator());
goodCount++;
else if(op.equals("<"))
lt=z.lt(z1);
if(screenOutput)
System.out.println(buffer + " is " + lt);
if(fileOutput || fileOutput && screenOutput)
outfile.println(buffer + " is " + lt);
goodCount++;
else if(op.equals(">"))
gt=z.gt(z1);
if(screenOutput)
System.out.println(buffer + " is " + gt);
if(fileOutput || fileOutput && screenOutput)
outfile.println(buffer + " is " + gt);
goodCount++;
else if(op.equals("="))
eq=z.eq(z1);
if(screenOutput)
System.out.println(buffer + " is " + eq);
if(fileOutput || fileOutput && screenOutput)
outfile.println(buffer + " is " + eq);
goodCount++;
else if(op.equals("<="))
le=z.le(z1);
if(screenOutput)
System.out.println(buffer + " is " + le);
if(fileOutput || fileOutput && screenOutput)
outfile.println(buffer + " is " + le);
goodCount++;
else if(op.equals(">="))
ge=z.ge(z1);
if(screenOutput)
System.out.println(buffer + " is " + ge);
if(fileOutput || fileOutput && screenOutput)
outfile.println(buffer + " is " + ge);
goodCount++;
else
if(op==null)
if(screenOutput)
System.out.println("Invalid expression: " + buffer);
if(fileOutput || fileOutput && screenOutput)
outfile.println("Invalid Expression: " + buffer);
badCount++;
else
if(screenOutput)
System.out.println("Invalid expression: " + buffer );
if(fileOutput || fileOutput && screenOutput)
outfile.println("Invalid expression: " + buffer);
badCount++;
else
if(screenOutput)
System.out.println("Invalid operand: " + buffer);
if(fileOutput || fileOutput && screenOutput)
outfile.println("Invalid operand: " + buffer);
else
if(screenOutput)
System.out.println("Invalid operand: " + buffer);
if(fileOutput || fileOutput && screenOutput)
outfile.println("Invalid operand: " + buffer);
badCount++;
buffer = br.readLine();
Prints the banner for the program
private static void printBanner()
System.out.println("+++++++++++++++++++++++++++++++++++++++++"+"\n"+"+Welcome to the expression connection +"+"\n"+"+++++++++++++++++++++++++++++++++++++++++");
Prints the total number of expressions, total number of valid expressions, and total number of bad expressions.
private static void printSummary(int goodCount, int badCount, int totCount)
totCount = goodCount + badCount;
System.out.println("\n");
System.out.println("+++++++++++++++++++++++++++++++++++++++++");
System.out.println("+ Total Expressions: "+totCount);
System.out.println("+ Total Valid Expressions "+goodCount);
System.out.println("+ Total Bad Expressions "+badCount);
System.out.println("+++++++++++++++++++++++++++++++++++++++++");
Prints the error message if there is no output file specified
private static void noOut(String errorString)
System.out.println("\n");
System.out.println("Proj1: " + errorString);
Prints the error message if there is an invalid option input by the user
private static void invalidOption(String errorString)
System.out.println("\n");
System.out.println("Proj1: " + errorString);
System.out.println("Proj1: Usage is: java proj1 [-fob] [input] [output]");
System.exit(0);
Prints the error message if there is a bad option input by the user
private static void badOption(String errorString)
System.out.println("\n");
System.out.println("Proj1: " + errorString);
System.out.println("Proj1: Usage is: java proj1 [-fob] [input] [output]");
System.exit(0);
Prints the error message if the input file does not exist
private static void nonExist(String errorString)
System.out.println("\n");
System.out.println("Proj1: " +errorString);
System.out.println("Proj1: Usage is: java proj1 [-fob] [input] [output]");
System.exit(0);
Closes the files used by the user
private static void closeFiles( )
if(fileOutput && !screenOutput)
outfile.close();
System.exit(0);
}Well working is good...
The code itself is less than spectacular I'm afraid. There is very little
OOness to this. For your future reference when you complete a program
and it consists of nothing but static methods you have done something
incorrectly.
As far as the code you do have goes some refactoring would be nice.
The two main methods you have (proj1 but especially processData) are
too long and unwieldy. processData seems to be a program in an of
itself. It's complicated and hard to follow.
My recommendation to you would be to read this http://java.sun.com/docs/books/tutorial/java/index.html
Especially focus on the sections dealing with explanation of Object
programming. These terms and concepts can certainly be confusing to
new programmers so you may also want to consider finding yourself a
tutor to help you get a better grasp of these concepts.
In short if it works that's good. And it's also good to see that you put the
effort and time in that you have. However if I was grading your project
I'd give it a C- at best because this is a Java program in syntax only. -
How to make this loader? (Saw it from apple shuffle demo)
Hi, how is this loader done?
By animation or action scripts?Any tutorials for this?
i attach an image*
a direct link to see:
http://203.211.138.133/siewna/yen/flash_load2.jpg
Thanks!!!Thanks for your reply!
I had reattached -
I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx, -
I
To get the best answer to your question, go to the forum that relates to the software you are using and then give complete details on what you have done. There are specific forums for Photoshop, After Effects, Premiere, Flash, etc.
Your question is too vague to make sense. -
I have an iMac with an OSX 10.9.5. I have an MPEG4 program that is running. QuickTime Player can't open it up for me to stop it. What are my options? I've tried downloading QuickTime Player 7, an older version but that hasn't helped.
Not sure what you mean then. Is QuickTime still open and playing the video? If so, do you mean you can't even get back to QT to shut it down?
Check the Dock for the QT logo. Click it to bring that app to the foreground. The menu bar then should say QuickTIme Player next to the Apple logo. Close the app and the video will shut down with it. -
Error message after allowing an upgrade:My dialogue box in the error message says: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll--this happened after I allowed an upgrade to be installed. I have HP Windows 7. Now my Iphone will not sync. What do I do?
Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well. -
Up until recently I was able to watch Netflicks movies thru streaming. I now received a error message: plug in failure. Can anyone suggest how I can correct this?
I had the same problem. I checked with Netflix and they told me to uninstall and reinstall the silverlight? plug in. We went through several versions of this. Long story short, nothing worked, but it DID run just fine on other users on the same machine. a couple of months later, BAM it suddenly works perfectly again. Netflix blames Apple, Apple blames netflix... who knows...
Here's my advice: download the Silverlight or whatever it's called plugin and do the uninstall, then reinstall. If that works, great!
If not, make up a new user and see if netflix plays from that account. If so, you have a workaround that is tedious, but at least lets you watch your movies! Someday in the future,it might just start working again.
Maybe you are looking for
-
Iphone calendar sync to exchange is one-way, mail & contacts working
i had a problem where i was getting nothing from the exchange server ( SBS2003 ) in my calendar... but if i added something to my iphone 3g, it would show up in outlook. my iphone 2.2.1, ipod touch 2.2.1, and dev iphone using 3.0b5 all were the same.
-
hello everyone here is my procedure in procedure select statement is running very slow it takes 20min DECLARE y10_pad_sd_1 number; y10_sad_sd_1 number; y10_sad_oe_1 number; y10_she18_avg_1 number; y10_she_avg_1 number; y10_o_pad_sd_1 number; y10_e_pa
-
Error in running the Financial Brokerage System (FBS) sample application
hi, i hav successfully compiled and deployed the FBS app in Standalone OC4J903. Jedeleoper IDE verion - 903 preview When i try to run the app using : http://mymachinename.com:8888/ibfbs/controllerservlet I get the following error : Error in Admin Man
-
What tool is this & where is it? During keynote,=take portion of image(mask
The demo that I saw was a flower? I think, they took the flower out of the image and all that was left was the flower, no background. Some sort of mask function. Thanks!
-
Digital waveform editor can not open hws file generated by niHWS store waveform
Hi, I am using a simple VI to store the U32 array to a hws file in LabVIEW, however, the file generated can not be opened by Digital Waveform Editor. The VI used to be working well before I upgrade LabVIEW from V7 to V7.1. Meanwhile I also found out