IWeb "Original Size" download option? -- Not Even Close!
Unless I'm doing something very wrong -- which I sincerely hope is the case -- then iWeb's photo prefs are guilty of seriously false advertising.
I'm trying to create a "My Albums" page, such that the photos in the various albums it indexes can be downloaded FULL SIZE (in the same way that full res images can be downloaded from a MobileMe Gallery, provided the "Allow Downloading of Actual Size Images" option was selected when the Gallery was published).
So in iWeb, I made sure to deselect the "Optimize Images on Import" General Prefs option, before dragging in Aperture Projects and Albums from the Media Browser's Photos tab to create the new iWeb albums, and then made sure to select "Original (Full Quality)" as the Photo Sharing option for each album page in the Inspector’s Photos tab.
After publishing to my MobileMe account, I then visited the new site and did some test downloading, only to find that even with the above settings, the images which downloaded to my hard drive were still a much smaller pixel size than the originals. After a couple more tests, it appears the largest size download I can get from a picture in an iWeb photo album is 1280 pixels in either direction, whereas from a MobileMe Gallery I get the same pixel dimension as the original (so long as that aforementioned "Allow Downloading of Actual Size Images" option was selected).
So what's the deal here? Does iWeb have yet another "Don't shrink-it-just-leave-it-alone" option vis-a-vis photos and their downloadability which I missed?
Or does this "Original (Full Quality)" Photo Download Size option nevertheless impose a 1280-pixel upper limit? And if so, then WHY? I'm a big boy, I can decide how much of my allotted account space I want taken up with non-Optimized photos -- at least I SHOULD be able to decide that.
Any pointers as to how to overcome this arbitrary 1280-pixel download limit would be much appreciated!
Thanks,
John Bertram
Toronto
Roddy wrote:
I guess the answer is no.
A website is for viewing stuff online.
If you want people to be able to download them full size, put them in a folder, ZIP it and create a download link.
You would be best to create a download page(s) for this as, if you put the download files on the photo page it would take forever to download in the browser.
Thanks for the note -- though I'm going to respectfully disagree on the basic premise it presents: that a photo viewing site, and a photo sharing/downloading site, cannot co-exist.
It's a topic I've gone into at length in a new Aperture thread, posted at
http://discussions.apple.com/thread.jspa?threadID=1996786&tstart=0
In the meantime, having discovered the cause of this mysterious 1280-pixel limitation (see next post, below), I was pleased to see that including "unoptimized" images in my iWeb Photo Pages, and allowing them to be downloaded at their full pixel size, did NOT in fact slow down the actual loading or displaying of those same pages -- at least not to any appreciable degree. Which makes sense, since what iWeb is presenting to the end user are its own thumbs and individual previews -- regardless of what size downloads I've enabled in my photo sharing settings for that page. So the individual images display just as quickly.
The only thing that does take a little longer of course is when I initially publish or update my iWeb pages, and the larger, unoptimized images are uploaded to my MobileMe account. Likewise the individual downloading (not the online displaying, just the actual downloading if the user chooses to do so) of selected images -- since a 4MB jpg obviously takes a bit more time to copy to your hard drive than a smaller, 1MB version of the same image.
But the difference is negligible, and like I say, it doesn't seem to affect the preview-size displaying of the images at all, only the full-size downloading. And since my particular "audience" (the people for whom I'm creating these pages) are typically each only downloading a small handful of individual pics selected from each group of images, that's not a problem.
So the answer to my question:
...can iWeb photo pages be configured to allow downloading of images
at their full, original pixel size?
Is in fact: Yes, absolutely -- and with no apparent detriment to how well the images display online.
Cheers,
jb
Similar Messages
-
How do I get my money back? Adobe Send feature set not even close to Send Now. No password protected download link option, poor contact management, no branded sending, no Outlook add-in / support. Wow. Talk about killing an excellent product.
Poor Contact Management? I see no contact management lol.
What a fiasco!
Pay Doyle -
WYSIWYG...not even close
I'm trying to use Robohelp 9 and have many problems. One of the most time consuming is the WYSIWYG editor. Changes in the editor are not correctly reflected when I preview. I spend half my time making tiny changes and previewing until I get the results I want.
Another problem is the styles... I apply a predefined style (normal) and either nothing changes or only part of the selected text changes... I've been using this product since Robo3 and can't really say it's improved.
I would pay double the cost if Micosoft would build a tool like Robohelp based on the consistant functionality of Word.
Win7 Pro
Technical Communication Suite 3I understand that this was not coded by Adobe originally, but their name is on it now and it's not up to par with the other outstanding products they produce.
As you can see, the table column widths in this example are not even close to the same in the preview. -
Layout displayed by Dreamweaver not even close to Firefox
As a long-time Dreamweaver user, back to Dreamweaver 3, I'd
been used to the layout displayed by Dreamweaver being close to
that displayed by browsers. With Dreamweaver 8, it's often not even
close.
Typical problems:
- Vertical line spacing is different in Dreamweaver and in
Firefox 2. May be a browser problem.
- Unwanted vertical space between DIV tags in Dreamweaver
when DIV contains a FORM.
- Multiple column layout with DIV tags totally different in
Dreamweaver 8 and Firefox 2.
I realize that CSS layout is less reliable than table layout,
but that's what we pay Adobe to deal with.
This should just work by now.Ok: CSS layouts *can* be counted on to display reliably in
current browsers
just as much as table layouts can.
That's true, then? :-)
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> My experience leads me not to make such general comments
about either.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "P@tty Ayers"
<[email protected]> wrote in message
> news:[email protected]...
>> I'm assuming that by "reliable" we mean "can be
counted on to display
>> properly in current browsers". I base it on lots of
experience, and the
>> experience of almost everybody else I've heard from
about it - pretty
>> much universally accepted common knowledge, I
guess..
>>
>> --
>> Patty Ayers | www.WebDevBiz.com
>> Free Articles on the Business of Web Development
>> Web Design Contract, Estimate Request Form, Estimate
Worksheet
>> --
>>
>> "Walt F. Schaefer" <[email protected]>
wrote in message
>> news:[email protected]...
>>> I'm still curious. What do you base that on?
>>>
>>> Walt
>>>
>>> "P@tty Ayers"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>> "CSS layout is less reliable than table
layout."
>>>>
>>>> --
>>>> Patty Ayers | www.WebDevBiz.com
>>>> Free Articles on the Business of Web
Development
>>>> Web Design Contract, Estimate Request Form,
Estimate Worksheet
>>>> --
>>>>
>>>>
>>>>
>>>>
>>>> "Walt F. Schaefer"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>>>>I realize that CSS layout is less
reliable than table layout
>>>>>
>>>>> Just curious, where did you acquire that
pearl of wisdom? I've never
>>>>> heard anyone make that claim.
>>>>>
>>>>> Walt
>>>>>
>>>>> "John Nagle"
<[email protected]> wrote in message
>>>>>
news:[email protected]...
>>>>>> As a long-time Dreamweaver user,
back to Dreamweaver 3, I'd been used
>>>>>> to the
>>>>>> layout displayed by Dreamweaver
being close to that displayed by
>>>>>> browsers.
>>>>>> With Dreamweaver 8, it's often not
even close.
>>>>>>
>>>>>> Typical problems:
>>>>>> - Vertical line spacing is different
in Dreamweaver and in Firefox 2.
>>>>>> May be a
>>>>>> browser problem.
>>>>>> - Unwanted vertical space between
DIV tags in Dreamweaver when DIV
>>>>>> contains a
>>>>>> FORM.
>>>>>> - Multiple column layout with DIV
tags totally different in
>>>>>> Dreamweaver 8 and
>>>>>> Firefox 2.
>>>>>>
>>>>>> I realize that CSS layout is less
reliable than table layout, but
>>>>>> that's what
>>>>>> we pay Adobe to deal with.
>>>>>> This should just work by now.
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
> -
Iweb photo gallery -- download option unwanted
I just created my first site using iweb and put a photo gallery on there. I noticed that there is a download option which I DO NOT want on there!! I want to make my photo galleries view ONLY! Is there a way to change the settings??
Thanks!No. There is not way to prevent any photo on a web site to not be copied. At the least a visitor can make a screenshot of it.
To make it more difficult for someone to use one of your photos as if it were one of their own put a watermark on the photos. It's not foolproof but will discourage the less sophisticated users from using them.
There are many watermarking applications that can add them in batches. Go to MacUpDate.com and search for "watermark" to find possible candidates. -
My iPad screem is very big any way to put back to original size i can not open any program
my iPad screen is very big any advise how to put back to the original size? i can not open anything i have one big iten in all my screen
Try double-tapping the screen with 3 fingers, then make sure that Settings > General > Accessibility > Zoom is 'off'
-
Microsoft Course VS Exam VS Real life = Not even close relevant!
Howdy folks,
I'm writing this just after taking my exam, 70-410. (644, so fail)
Seeing it is a fail and i'm not really new to the microsoft scene, i do company migrations etc and been doing it for years.
For the exam, i've done the most things anyone would do:
- Get the Microsoft book for the Exam and go thru it.
- See what you are not so good at and repeat it and test it in labs.
- Brush up on Powershell, did the virtual acadamy for the basics, jumpstart series.
After my exam, fail.. what i noticed during the exam and annoys me to death:
- Subnetting, hellow microsoft, if i want to be a great subnetter en supernetter i will take the CCNA of Cisco. In real life we get those info's from the network guys. If not google, subnetting tools etc, you'll find it, stop re-inventing the wheel..
- What powershell Cmdlet would you use to do this.... the creator of powershell says: "Remember NOTHING we spend ages optimizing the Get-Help or Get-Command functions and building a whole friggn' ISE, because powershell is to big to memorize." i can't
stress this enough, STOP this, give an ISE and let your students MAKE the Cmdlet.
- Calculator in the exam, c'mon, not even an advanced calculator for subnetting.....???
So Microsoft, i hope you will do something about this crap because, c'mon your books are basic, use trainsignal, pluralsight or cbtnuggets, virtual labs and in the end you hang the result of an exam on what powershell Cmdlet you would use???
Kind regards,
Someone who will think 3 times of the value of your certifications.It's a common complaint that the exams contain questions that are not "real life" or they are unfair, such as memorizing a PS cmdlet for doing a certain task when you'd normally just look it up or make your own.
Agreed! However, you still need to pass this exam.
Write down everything you can remember in the exam that gave you problems. Spend at least an hour doing this. Then study up and write notes on all those topics, then take it again within a couple weeks.
It's a "brute force" method but it will help you answer those difficult (unfair?) questions and help you put this exam behind you.
Microsoft knows their exams are hard and expects you to retake them when you fail. Even Microsoft employees fail exams and retake them. I've failed my share but thankfully there is no record of my failed exams available anywhere - just the exams I have passed.
It bites, I know.
Good luck.
Best wishes, Davin Mickelson -
Download Option Not Working in ALV Using Classes
Hi,
Can anyone let me know what im missing since i get only my header downloaded when i download my output to EXCEL.
Im using ALV using CLASSES.
Thanks,
AnitaREPORT ZTMM_STOCK MESSAGE-ID zmsg
LINE-SIZE 270
LINE-COUNT 58
NO STANDARD PAGE HEADING.
tables: YGFMLINV, "Material Ledger - Inventory Data Extract
lfa1, "Vendor Master (General Section)
setheader, "Set Header and Directory(checking profit center grp)
mseg,
t001w,
mslbh,
mslb,
t001.
Internal Tables Declaration
data: begin of i_ygfmlinv occurs 0,
BDATJ like ygfmlinv-bdatj, "Posting date YYYY
POPER like ygfmlinv-poper, "Posting period
BUKRS like ygfmlinv-bukrs, "Company Code
PRCTR like ygfmlinv-prctr, "Profit center
WERKS like ygfmlinv-werks, "Plant
BKLAS like ygfmlinv-bklas, "Valuation class
MATNR like ygfmlinv-matnr, "Material number
BWTAR like ygfmlinv-bwtar, "Valuation type
STOCK_IND like ygfmlinv-stock_ind, "Stock indicators
MEINS like ygfmlinv-meins, "Base unit of measure
MLAST like ygfmlinv-mlast, "Material Price Dtermination: Control
LBKUM like ygfmlinv-lbkum, "Total valuated stock
vprsv like ygfmlinv-vprsv, "Price control indicator
lc_mvp_prc like ygfmlinv-lc_mvp_prc, "LC:Moving Avg/Periodic Prc
LC_CURTP like ygfmlinv-LC_CURTP, "Currency Type
LC_CURRENCY like ygfmlinv-lc_currency, "Currency Key
gc_curtp like ygfmlinv-gc_curtp, "Grp.Curr Type
gc_currency like ygfmlinv-gc_currency, " Grp.Curr
LC_TOT_AMT like ygfmlinv-lc_tot_amt, "LC: Total Amount
KONTS LIKE T030-KONTS, "G/L Account No
XBILK LIKE SKA1-XBILK,
lc_cogs like ygfmlinv-lc_var_amt,
lifnr like mslbh-lifnr,
lc_trfix_amt like ygfmlinv-lc_trfix_amt,
lc_lofix_amt like ygfmlinv-lc_lofix_amt,
lc_var_amt like ygfmlinv-lc_var_amt,
lc_utp_amt like ygfmlinv-lc_utp_amt,
end of i_ygfmlinv.
data: begin of i_mslbh occurs 0,
MATNR like mslbh-matnr, "Material number
SOBKZ like mslbh-sobkz, "Special stock indicator
LIFNR like mslbh-lifnr, "Account number of vendor or creditor
WERKS like mslbh-werks, "Plant
CHARG like mslbh-charg, "Batch number
LFGJA like mslbh-lfgja, "Fiscal year of current period
LFMON like mslbh-lfmon, "Current period (posting period)
LBLAB like mslbh-lblab, "Current period (posting period)
LBINS like mslbh-lbins, "Stock in quality inspection
end of i_mslbh.
data: begin of i_MSLB occurs 0,
MATNR like mslb-matnr,
WERKS like mslb-werks,
SOBKZ like mslb-sobkz,
LIFNR like mslb-lifnr,
LFGJA like mslb-lfgja,
LFMON like mslb-lfmon,
LBLAB like mslb-lblab,
LBINS like mslb-lbins,
LBEIN like mslb-lbein,
end of i_mslb.
*data: begin of i_t030 occurs 0,
KTOPL like t030-ktopl,
BKLAS like t030-bklas,
KONTS like t030-konts,
end of i_t030.
*data: begin of i_ska1 occurs 0,
SAKNR like ska1-saknr,
XBILK like ska1-xbilk,
end of i_ska1.
DATA : BEGIN OF i_non_subc OCCURS 0,
MATNR LIKE YGFMLINV-MATNR, "Material
WERKS LIKE YGFMLINV-WERKS, "Plant,
bukrs like ygfmlinv-bukrs, "Company Code
BKLAS LIKE YGFMLINV-BKLAS, "Val Class
PRCTR LIKE YGFMLINV-PRCTR, "Profit Center
BWTAR LIKE YGFMLINV-BWTAR, "Val Type
LBKUM LIKE YGFMLINV-LBKUM, "QTY
PEINH LIKE YGFMLINV-PEINH, "Price Unit
MEINS LIKE YGFMLINV-MEINS, "Unit of Measure
lc_currency like ygfmlinv-lc_currency,
lc_curtp like ygfmlinv-lc_curtp,
gc_currency like ygfmlinv-gc_currency,
gc_curtp like ygfmlinv-gc_currency,
LC_VAR_AMT LIKE YGFMLINV-LC_VAR_AMT, "LC :Variable Amt
LC_TRFIX_AMT LIKE YGFMLINV-LC_TRFIX_AMT, "LC :Trnsfer Fixed Amt
LC_LOFIX_AMT LIKE YGFMLINV-LC_LOFIX_AMT, "LC:Local Fixed Amt.
LC_COGS LIKE YGFMLINV-LC_VAR_AMT, "Total LC fixed COGS
"added as per CC01507
LC_UTP_AMT LIKE YGFMLINV-LC_UTP_AMT, "LC:UTP Amount.
LC_TR_VAL LIKE YGFMLINV-LC_LOFIX_AMT,"TotalLC Transfer value
XBILK LIKE SKA1-XBILK, "Balance Indicator
gc_var_amt like ygfmlinv-gc_var_amt,
gc_trfix_amt like ygfmlinv-gc_trfix_amt,
gc_lofix_amt like ygfmlinv-gc_lofix_amt,
gc_cogs like ygfmlinv-gc_var_amt,
gc_utp_amt like ygfmlinv-gc_utp_amt,
gc_tr_val like ygfmlinv-gc_lofix_amt,
END OF i_non_subc.
Final Output Table
types: begin of t_output,
matnr like ygfmlinv-matnr,
lifnr like mslbh-lifnr,
werks like ygfmlinv-werks,
spstk like mslbh-lblab,
totstk like ygfmlinv-lbkum,
lc_currency like ygfmlinv-LC_CURRENCY,
lc_curtp like ygfmlinv-lc_curtp,
gc_curtp like ygfmlinv-gc_curtp,
gc_currency like ygfmlinv-gc_currency,
name1 like lfa1-name1,
vprsv like ygfmlinv-vprsv,
bukrs like ygfmlinv-bukrs,
mlast like ygfmlinv-mlast,
meins like ygfmlinv-meins,
bklas like ygfmlinv-bklas,
maktx like makt-maktx,
stdprice(18),
totval like ygfmlinv-lc_tot_amt,
sobkz like mslbh-sobkz,
end of t_output.
Work Area for Final Output Table
data: wa_output type t_output.
ALV Display
Name of Custom Container added on the screen
data: G_CONTAINER TYPE SCRFNAME VALUE 'ZGRID_CTRL',
ALV GRID Instance Reference
G_GRID1 TYPE REF TO CL_GUI_ALV_GRID, "Grid
Instance Reference to Custom Container
G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
PBO Status
data: ok_code like sy-ucomm,
Field Catalog Table
gT_FIELDCAT TYPE LVC_T_FCAT,
Layout Structure
gs_layout type lvc_s_layo,
Sorting anf Subtotal
gt_sort TYPE lvc_s_sort occurs 0,
gt_output type standard table of t_output.
data: g_curr(2).
CLASS lcl_event_receiver DEFINITION
class lcl_event_receiver definition.
public section.
Add SUB TOTAL TEXT to the ALV DISPLAY
methods handle_subtotal_text
for event subtotal_text of cl_gui_alv_grid
importing es_subtottxt_info ep_subtot_line e_event_data.
endclass.
Declaration for EVENT Receiver
data: event_receiver type ref to lcl_event_receiver,
l_subtxt(60) value 'Subtotal Text'.
field-symbols: <fs> type t_output,
<fs1>.
CLASS LCL_EVENT_RECEIVER IMPLEMENTATION
CLASS LCL_EVENT_RECEIVER IMPLEMENTATION.
METHOD HANDLE_SUBTOTAL_TEXT.
FIELD for which the SUBTOTAL is Calculated
if es_subtottxt_info-criteria = 'MATNR'.
ASSIGN EP_SUBTOT_LINE->* TO <FS1>.
ASSIGN E_EVENT_DATA->M_DATA->* TO <FS>.
CONCATENATE es_subtottxt_info-keyword ':MATERIAL'
<fs>-matnr INTO <fs1>.
ENDIF.
ENDMETHOD. "HANDLE_SUBTOTAL_TEXT
ENDCLASS. "LCL_EVENT_RECEIVER IMPLEMENTATION
Constants
constants: c_eb(2) value 'EB',
c_m value 'M',
C_KTOPL(4) VALUE 'TCOA',
C_KTOSL(3) VALUE 'BSX',
C_KONTS(4) VALUE '002%'.
Selection Screen
selection-screen:begin of block b1 with frame title text-001.
select-options: s_lifnr for lfa1-lifnr , "Vendor
s_werks for YGFMLINV-werks obligatory, "Plant
s_prctr for YGFMLINV-prctr, "Pr.Ctr
s_matnr for ygfmlinv-matnr, "Mat.No
s_bwtar for mseg-bwtar no-display.
parameters: p_bukrs like YGFMLINV-bukrs obligatory, "C.Code
p_pctrgp like SETHEADER-SETNAME, "Pf.ct.Grp
p_poper like YGFMLINV-poper obligatory, " Period
p_bdatj like YGFMLINV-bdatj obligatory, " Year
r_ccode radiobutton group rad1 default 'X',
r_grpcur radiobutton group rad1.
selection-screen: end of block b1.
Ranges Declaration
RANGES : R_PROFIT_CTR FOR CEPC-PRCTR.
INITIALIZATON
*initialization.
Validations for Selection Screen
Validation for Vendor
at selection-screen on s_lifnr.
select single lifnr
from lfa1
into lfa1-lifnr
where lifnr in s_lifnr.
if sy-subrc ne 0.
message e039.
endif.
Validation for Plant
at selection-screen on s_werks.
select single werks
from t001w
into t001w-werks
where werks in s_werks.
if sy-subrc ne 0.
message e040.
endif.
Validation for Profit Center
at selection-screen on s_prctr.
select single prctr
from ygfmlinv
into ygfmlinv-prctr
where prctr in s_prctr.
if sy-subrc ne 0.
message e041.
endif.
Validation for Company Code
at selection-screen on p_bukrs.
select single bukrs
from t001
into t001-bukrs
where bukrs eq p_bukrs.
if sy-subrc ne 0.
message e042.
endif.
Validation for Profit Center Group
at selection-screen on p_pctrgp.
if not p_pctrgp is initial.
select single setname
from setheader
into setheader-setname
where setname eq p_pctrgp.
if sy-subrc ne 0.
message e043.
endif.
endif.
Validation for Fiscal Period
*at selection-screen on p_poper.
select single poper
from YGFMLINV
into YGFMLINV-poper
where poper eq p_poper.
if sy-subrc ne 0.
message e045.
endif.
Validation for Fiscal Year
*at selection-screen on p_bdatj.
select single bdatj
from YGFMLINV
into YGFMLINV-bdatj
where bdatj eq p_bdatj.
if sy-subrc ne 0.
message e046.
endif.
start-of-selection.
if p_pctrgp ne ' '.
perform f_profit_center_select.
endif.
perform f_data_selection. "using p_profit_center..
end-of-selection.
call screen 100.
*& Form f_data_selection
text
--> p1 text
<-- p2 text
FORM f_data_selection.
data: l_flg,
l_lblab like mslbh-lblab,
l_name1 like lfa1-name1,
l_rate like mslbh-lblab,
l_maktx like makt-maktx,
l_diff_stk like mslbh-lblab,
l_totval like ygfmlinv-lc_tot_amt.
From profit center group get Profit Center
LOOP AT R_PROFIT_CTR.
IF R_PROFIT_CTR-LOW EQ R_PROFIT_CTR-HIGH.
R_PROFIT_CTR-OPTION = 'EQ'.
R_PROFIT_CTR-HIGH = SPACE.
MODIFY R_PROFIT_CTR.
ENDIF.
ENDLOOP.
if r_ccode eq 'X'.
g_curr = '10'.
else.
g_curr = '30'.
endif.
if g_curr eq '10'.
Fetch TOTAL STOCK ,VALUE from ML - Inv. Data Extract Table
select BDATJ POPER BUKRS PRCTR WERKS BKLAS MATNR
BWTAR STOCK_IND MEINS MLAST LBKUM
vprsv lc_mvp_prc LC_CURTP
LC_CURRENCY LC_TOT_AMT
lc_var_amt LC_UTP_AMT
lc_trfix_amt lc_lofix_amt
gc_curtp gc_currency
from YGFMLINV
into corresponding fields of table i_YGFMLINV
where bdatj eq p_bdatj and
poper eq p_poper and
bukrs eq p_bukrs and
werks in s_werks and
matnr in s_matnr and
STOCK_IND eq c_m and
trans_type eq c_eb and
lc_curtp eq g_curr.
else.
Fetch TOTAL STOCK ,VALUE from ML - Inv. Data Extract Table
select BDATJ POPER BUKRS PRCTR WERKS BKLAS MATNR
BWTAR STOCK_IND MEINS MLAST LBKUM
vprsv lc_mvp_prc LC_CURTP
LC_CURRENCY LC_TOT_AMT
lc_var_amt LC_UTP_AMT
lc_trfix_amt lc_lofix_amt
gc_curtp gc_currency
from YGFMLINV
into corresponding fields of table i_YGFMLINV
where bdatj eq p_bdatj and
poper eq p_poper and
bukrs eq p_bukrs and
werks in s_werks and
matnr in s_matnr and
STOCK_IND eq c_m and
trans_type eq c_eb and
gc_curtp eq g_curr.
endif.
Delete Entries not in Profit Center range
LOOP AT I_YGFMLINV.
IF NOT I_YGFMLINV-PRCTR IN R_PROFIT_CTR.
DELETE I_YGFMLINV.
ENDIF.
ENDLOOP.
if not i_ygfmlinv[] is initial.
data l_date like mkpf-budat.
move : p_bdatj to l_date(4),
p_poper to l_date+4(2),
'31' to l_date+6(2).
Get the TOTAL STOCK for Vendor and Material
SELECT MATNR
WERKS
CHARG
SOBKZ
LIFNR
LFGJA
LFMON
LBLAB
LBINS
FROM MSLBH INTO corresponding fields of TABLE I_MSLBH
for all entries in i_ygfmlinv
WHERE MATNR eq i_ygfmlinv-matnr and
WERKS EQ i_ygfmlinv-WERKS AND
SOBKZ in p_stkind AND
LIFNR in s_LIFNR AND
LFGJA GE P_BDATJ and
lfmon eq p_poper.
if sy-subrc eq 0.
DELETE I_MSLBH WHERE LFGJA EQ P_BDATJ AND
LFMON LT P_POPER.
endif.
endif.
sort i_mslbh by matnr lifnr werks lfgja lfmon.
sort i_ygfmlinv by matnr werks bdatj poper.
loop at i_mslbh.
l_lblab = l_lblab + i_mslbh-lblab.
at end of lifnr.
l_flg = 'X'.
endat.
read table i_ygfmlinv with key matnr = i_mslbh-matnr
werks = i_mslbh-werks
bdatj = i_mslbh-lfgja
poper = i_mslbh-lfmon
binary search.
if sy-subrc eq 0.
select single name1 from lfa1 into l_name1
where lifnr eq i_mslbh-lifnr.
if sy-subrc eq 0.
select single maktx
from makt
into l_maktx
where matnr eq i_mslbh-matnr and
spras eq sy-langu.
if l_flg eq 'X'.
Subtract Total stk from Special Stock Vendor to get the difference
l_diff_stk = i_ygfmlinv-lbkum - l_lblab.
move : i_mslbh-matnr to wa_output-matnr,
i_mslbh-lifnr to wa_output-lifnr,
i_mslbh-werks to wa_output-werks,
l_lblab to wa_output-totstk,
l_name1 to wa_output-name1,
i_ygfmlinv-vprsv to wa_output-vprsv,
i_ygfmlinv-meins to wa_output-meins,
i_ygfmlinv-lc_mvp_prc to wa_output-stdprice,
i_ygfmlinv-mlast to wa_output-mlast,
i_ygfmlinv-bukrs to wa_output-bukrs,
i_ygfmlinv-bklas to wa_output-bklas,
i_mslbh-sobkz to wa_output-sobkz.
if g_curr eq '10'.
move: i_ygfmlinv-lc_curtp to wa_output-lc_curtp,
i_ygfmlinv-lc_currency to wa_output-lc_currency.
else.
move: i_ygfmlinv-gc_curtp to wa_output-gc_curtp,
i_ygfmlinv-gc_currency to wa_output-gc_currency.
endif.
if wa_output-totstk ne 0.
l_rate = i_ygfmlinv-LC_TOT_AMT / i_ygfmlinv-lbkum.
wa_output-totval = l_rate * l_lblab.
endif.
append wa_output to gt_output.
move wa_output-totval to l_totval.
clear: l_rate,wa_output.
if l_diff_stk ne 0.
wa_output-totval = i_ygfmlinv-LC_TOT_AMT - l_totval.
move: i_mslbh-matnr to wa_output-matnr,
*Included - Remove
i_mslbh-matnr to wa_output-matnr,
i_mslbh-werks to wa_output-werks,
l_diff_stk to wa_output-totstk,
i_ygfmlinv-vprsv to wa_output-vprsv,
i_ygfmlinv-meins to wa_output-meins,
i_ygfmlinv-lc_mvp_prc to wa_output-stdprice,
i_ygfmlinv-mlast to wa_output-mlast,
i_ygfmlinv-bukrs to wa_output-bukrs,
i_ygfmlinv-bklas to wa_output-bklas.
if g_curr eq '10'.
move: i_ygfmlinv-lc_curtp to wa_output-lc_curtp,
i_ygfmlinv-lc_currency to wa_output-lc_currency.
else.
move: i_ygfmlinv-gc_curtp to wa_output-gc_curtp,
i_ygfmlinv-gc_currency to wa_output-gc_currency.
endif.
append wa_output to gt_output.
clear: i_ygfmlinv,l_flg,l_lblab,l_name1,wa_output,
i_mslbh.
endif.
endif.
endif.
endif.
endloop.
sort: i_ygfmlinv by matnr werks,
i_mslbh by matnr werks.
LOOP AT I_YGFMLINV.
read table i_mslbh with key matnr = i_ygfmlinv-matnr
binary search.
if sy-subrc eq 0.
delete i_ygfmlinv.
clear i_ygfmlinv.
else.
MOVE-CORRESPONDING I_YGFMLINV TO i_non_subc.
APPEND i_non_subc.
CLEAR I_YGFMLINV.
endif.
ENDLOOP.
sort i_non_subc by matnr werks.
data: l_lc_cogs(16) type p decimals 2,
l_lc_tr_val(16) type p decimals 2,
l_gc_cogs(16) type p decimals 2,
l_gc_tr_val(16) type p decimals 2.
LOOP AT i_non_subc.
if g_curr eq '10'.
l_LC_COGS = i_non_subc-LC_TRFIX_AMT +
i_non_subc-LC_LOFIX_AMT.
l_LC_TR_VAL = i_non_subc-LC_VAR_AMT + l_LC_COGS +
i_non_subc-LC_UTP_AMT.
else.
l_gc_cogs = i_non_subc-gc_trfix_amt + i_non_subc-gc_lofix_amt.
l_gc_tr_val = i_non_subc-gc_var_amt + i_non_subc-gc_cogs +
i_non_subc-gc_utp_amt.
endif.
at end of matnr.
l_flg = 'X'.
endat.
if l_flg eq 'X'.
move: i_non_subc-matnr to wa_output-matnr,
i_non_subc-werks to wa_output-werks,
i_non_subc-lbkum to wa_output-totstk,
i_non_subc-meins to wa_output-meins,
i_non_subc-bukrs to wa_output-bukrs,
i_non_subc-bklas to wa_output-bklas,
i_non_subc-lc_curtp to wa_output-lc_curtp,
i_non_subc-lc_currency to wa_output-lc_currency,
i_non_subc-gc_curtp to wa_output-gc_curtp,
i_non_subc-gc_currency to wa_output-gc_currency.
if g_curr eq '10'.
move l_lc_tr_val to wa_output-totval.
else.
move l_gc_tr_val to wa_output-totval.
endif.
i_non_subc-mlast to wa_output-mlast.
select single maktx
from makt
into l_maktx
where matnr eq i_non_subc-matnr and
spras eq sy-langu.
if sy-subrc eq 0.
move l_maktx to wa_output-maktx.
append wa_output to gt_output .
clear: wa_output,l_flg,l_lc_tr_val,l_lc_cogs,
l_gc_cogs,l_gc_tr_val.
endif.
endif.
ENDLOOP.
ENDFORM. " f_data_selection
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ZPF_STATUS'.
SET TITLEBAR 'ZTITLE'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module alv_display OUTPUT
text
MODULE alv_display OUTPUT.
data: total type ref to data,
subtotal1 type ref to data.
field-symbols <total> like gt_output .
field-symbols <subtotal1> like gt_output.
if g_grid1 is initial.
perform f_create_objects.
perform f_build_field_catalog changing gt_fieldcat.
perform f_prepare_layout changing gs_layout.
perform f_sort_sub_total changing gt_sort.
CALL METHOD G_GRID1->GET_SORT_CRITERIA
IMPORTING
ET_SORT = gt_sort[] .
CALL METHOD g_grid1->GET_SUBTOTALS
IMPORTING
EP_COLLECT00 = total
EP_COLLECT01 = subtotal1 .
EP_COLLECT02 =
EP_COLLECT03 =
EP_COLLECT04 =
EP_COLLECT05 =
EP_COLLECT06 =
EP_COLLECT07 =
EP_COLLECT08 =
EP_COLLECT09 =
ET_GROUPLEVELS = .
assign total->* to <total>.
assign subtotal1->* to <subtotal1>.
*ALV Display - Specify Sorting,Filtering Criteria
if gt_output[] is initial.
message i015.
endif.
CALL METHOD G_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
IS_LAYOUT = gs_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
IT_OUTTAB = gt_output[]
IT_FIELDCATALOG = gt_fieldcat
IT_SORT = gt_sort[]
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
others = 4 .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
else.
CALL METHOD G_GRID1->REFRESH_TABLE_DISPLAY
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
FINISHED = 1
others = 2 .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
ENDMODULE. " alv_display OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
case ok_code.
when 'BACK'.
set screen '0'.
leave screen.
when 'EXIT' or 'CANCEL'.
PERFORM EXIT_PROGRAM.
endcase.
clear ok_code.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form f_create_objects
text
--> p1 text
<-- p2 text
FORM f_create_objects.
Creating Custom Container Objects and GRID
IF G_grid1 IS INITIAL.
*Creating Custom Container Instance
Pass the name of the control that you have created on the screen
CREATE OBJECT G_CUSTOM_CONTAINER
EXPORTING CONTAINER_NAME = 'ZGRID_CTRL'.
*Creating ALV Grid Instance
CREATE OBJECT G_GRID1 EXPORTING I_PARENT = G_CUSTOM_CONTAINER.
endif.
ENDFORM. " f_create_objects
*& Form f_build_field_catalog
text
--> p1 text
<-- p2 text
FORM f_build_field_catalog changing pt_fieldcat type lvc_t_fcat.
data ls_fcat type lvc_s_fcat.
Val Type
ls_fcat-fieldname = 'BUKRS'.
ls_fcat-inttype = 'C'.
ls_fcat-outputlen = '4'.
ls_fcat-coltext = 'Val.Type'.
ls_fcat-seltext = 'Val.Type'.
ls_fcat-col_pos = '1'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
Val.Class
ls_fcat-fieldname = 'BKLAS'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-outputlen = '4'.
ls_fcat-coltext = 'Val.Class'.
ls_fcat-seltext = 'Val.Class'.
ls_fcat-col_pos = '2'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Plant
ls_fcat-fieldname = 'WERKS'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-outputlen = '4'.
ls_fcat-coltext = 'Plant'.
ls_fcat-seltext = 'Plant'.
ls_fcat-col_pos = '3'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Material
ls_fcat-fieldname = 'MATNR'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-outputlen = '18'.
ls_fcat-coltext = 'Material'.
ls_fcat-seltext = 'Material'.
ls_fcat-col_pos = '4'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Description
ls_fcat-fieldname = 'MAKTX'.
ls_fcat-TABNAME = 'MAKT'.
ls_fcat-outputlen = '40'.
ls_fcat-coltext = 'Description'.
ls_fcat-seltext = 'Description'.
ls_fcat-col_pos = '5'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Price Control
ls_fcat-fieldname = 'VPRSV'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-outputlen = '1'.
ls_fcat-coltext = 'Price Control'.
ls_fcat-seltext = 'Price Control'.
ls_fcat-col_pos = '6'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Price Determination
ls_fcat-fieldname = 'MLAST'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-outputlen = '1'.
ls_fcat-coltext = 'Price Determination'.
ls_fcat-seltext = 'Price Determination'.
ls_fcat-col_pos = '7'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
Total Stock
ls_fcat-fieldname = 'TOTSTK'.
ls_fcat-REF_TABLE = 'YGFMLINV'.
ls_fcat-REF_FIELD = 'LBKUM'.
ls_fcat-QFIELDNAME = 'MEINS'.
ls_fcat-IFIELDNAME = 'YGFMLINV'.
ls_fcat-coltext = 'Total Stock'.
ls_fcat-seltext = 'Total Stock'.
ls_fcat-col_pos = '8'.
ls_fcat-do_sum = 'X'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
Std. Price
ls_fcat-fieldname = 'STDPRICE'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-REF_TABLE = 'YGFMLINV'.
ls_fcat-ref_field = 'LC_MVP_PRC'.
ls_fcat-coltext = 'Std.Price'.
ls_fcat-col_pos = '9'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
if g_curr eq '10'.
Currency Type
ls_fcat-fieldname = 'LC_CURTP'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-coltext = 'Currency Type'.
ls_fcat-seltext = 'Currency Type'.
ls_fcat-col_pos = '10'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
else.
Currency Type
ls_fcat-fieldname = 'GC_CURTP'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-coltext = 'Currency Type'.
ls_fcat-seltext = 'Currency Type'.
ls_fcat-col_pos = '10'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
endif.
*Per Unit Price
ls_fcat-fieldname = 'STDPRICE'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-ref_table = 'YGFMLINV'.
ls_fcat-ref_field = 'LC_MVP_PRC'.
ls_fcat-currency = 'LC_CURRENCY'.
ls_fcat-coltext = 'Per.Unit.Price'.
ls_fcat-seltext = 'Per.Unit.Price'.
ls_fcat-col_pos = '11'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
Quantity Measurement
ls_fcat-fieldname = 'MEINS'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-coltext = 'Base Unit'.
ls_fcat-seltext = 'Base Unit'.
ls_fcat-col_pos = '12'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Total Value
ls_fcat-fieldname = 'TOTVAL'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-currency = 'GC_CURRENCY'.
ls_fcat-coltext = 'Total Value'.
ls_fcat-seltext = 'Total Value'.
ls_fcat-col_pos = '13'.
ls_fcat-do_sum = 'X'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Value/period
ls_fcat-fieldname = 'TOTVAL'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-currency = 'GC_CURRENCY'.
ls_fcat-coltext = 'Value/Period'.
ls_fcat-seltext = 'Value/Period'.
ls_fcat-col_pos = '14'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Vendor
ls_fcat-fieldname = 'LIFNR'.
ls_fcat-TABNAME = 'LFA1'.
ls_fcat-coltext = 'Vendor'.
ls_fcat-seltext = 'Vendor'.
ls_fcat-col_pos = '15'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Vendor Description
ls_fcat-fieldname = 'NAME1'.
ls_fcat-TABNAME = 'LFA1'.
ls_fcat-coltext = 'Vend.Desc'.
ls_fcat-seltext = 'Vend.Desc'.
ls_fcat-col_pos = '16'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Special Stock Indicator
ls_fcat-fieldname = 'SOBKZ'.
ls_fcat-TABNAME = 'MSLBH'.
ls_fcat-coltext = 'Spl.Stock Ind'.
ls_fcat-seltext = 'Spl.Stock Ind'.
ls_fcat-col_pos = '17'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
ENDFORM. " f_build_field_catalog
*& Form f_prepare_layout
text
<--P_GS_LAYOUT text
FORM f_prepare_layout CHANGING P_GS_LAYOUT type lvc_s_layo.
p_gs_layout-zebra = 'X'.
p_gs_layout-grid_title = 'Material List: Prices and Inventory Values'.
p_gs_layout-smalltitle ='X'.
p_gs_layout-no_totline = 'X'.
p_gs_layout-no_totarr = 'X'.
p_gs_layout-no_totexp = 'X'.
p_gs_layout-totals_bef = 'X'.
ENDFORM. " f_prepare_layout
*& Form f_profit_center_select
Validate the Profit Center Groups with Profit Center
--> p1 text
<-- p2 text
FORM f_profit_center_select.
DATA:V_RETCODE LIKE BAPIRET2,
V_GROUPNAME LIKE BAPICO_GROUP-GROUPNAME ,
p_kokrs like CEPC-KOKRS value 'DU01',
I_HIERARCHYNODES LIKE BAPISET_HIER OCCURS 0 WITH HEADER LINE,
I_PRCTR LIKE BAPI1116_VALUES OCCURS 0 WITH HEADER LINE.
V_GROUPNAME = P_PCTRGP.
CALL FUNCTION 'BAPI_PROFITCENTERGRP_GETDETAIL'
EXPORTING
CONTROLLINGAREA = P_KOKRS
GROUPNAME = V_GROUPNAME
IMPORTING
RETURN = V_RETCODE
TABLES
HIERARCHYNODES = I_HIERARCHYNODES
HIERARCHYVALUES = I_PRCTR.
LOOP AT I_PRCTR.
R_PROFIT_CTR-LOW = I_PRCTR-VALFROM.
R_PROFIT_CTR-HIGH = I_PRCTR-VALTO.
R_PROFIT_CTR-SIGN = 'I'.
R_PROFIT_CTR-OPTION = 'BT'.
APPEND R_PROFIT_CTR.
ENDLOOP.
ENDFORM. " f_profit_center_select
*& Form f_sort_sub_total
text
<--P_GT_SORT text
FORM f_sort_sub_total CHANGING P_GT_SORT.
DATA: ls_sort TYPE lvc_s_sort occurs 0 with header line.
ls_sort-spos = '1' .
ls_sort-fieldname = 'MATNR'.
ls_sort-up = 'X'.
ls_sort-subtot = 'X'.
ls_sort-expa ='X'.
ls_sort-group = 'UL'.
append ls_sort TO gt_sort.
ENDFORM. " f_sort_sub_total
*& Form EXIT_PROGRAM
text
--> p1 text
<-- p2 text
FORM EXIT_PROGRAM.
data: g_repid like sy-repid.
g_repid = sy-repid.
CALL METHOD G_CUSTOM_CONTAINER->FREE.
CALL METHOD CL_GUI_CFW=>FLUSH.
IF SY-SUBRC NE 0.
add your handling, for example
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
TITEL = G_REPID
TXT2 = SY-SUBRC
TXT1 = 'Error in Flush'(009).
ENDIF.
LEAVE PROGRAM.
ENDFORM. " EXIT_PROGRAM -
Disk full error, but not even close!! Please help.
I recently moved my I-Tunes music folder to an external hardrive on my network. Everything has been functioning great, but when I tried to make a purchase from the Itunes store today, I get the following message when trying to donload:
**The disk you are attmpting to use is full**
However, my preferences show the new location, which has over 150 GB available. I have not had any trouble adding to my library from other sources. My laptop has over 14 GB available, same as my Ipod. I cannot see where the source of the problem is. I have tried:
*restarting Itunes
*restarting my machine
*repairing my disk permissions (based on another thread)
None of these have eliminated the message and allowed download. Suggestions would be greatly appreciated.
PowerBook G4 Mac OS X (10.4.8) Itunes 7.0.1I don't understand it either, and I didn't study the problem at all after I got it working. I've read accounts of people experiencing this with varying amounts of space available, so I'm pretty sure it isn't directly related to the exact amount leftover (maybe it has to be above a threshold for the problem to occur at all...). Also, 200GB, while a nice even number in decimal form, isn't anything special in two's complement binary.
I'll assume that you are using the most current version of iTunes (7.0.2 I believe), so this confirms that the problem has not been repaired since I experienced it (7.0). So it is a lingering bug. I did experience the same oddness where I could download podcasts, but it was failing with videos. At the time I assumed it had to do with some arbitrary limit, and that the podcasts were small enough to remain under it. Now, I think it has to do with some state that is stuck in iTunes, and gets reset when something happens with the volume's filesystem.
Anyway, if following the above linked advice doesn't help in your situation, I'm at a loss for what else to try. I guess rebuilding your library may be worth a try. On a few occasions I've had to run "consolidate library". You could try that (if you are using the option to organize your files). It won't damage any of your settings.
On your last point, absolutely correct. Sorry about that, but that's my point of view.
Good luck.
Chris -
Artwork not downloading - iTunes not even trying!
I ripped Ryan Adams's (excellent) album Easy Tiger tonight. When I tried to download the art from the iTunes Store, iTunes thought about it for a little bit, then stopped. I assumed (wrongly) that the album doesn't exist in the iTS. I checked though, and there it is. So I tried again. This time the "Getting Album Artwork" blipped by in a fraction of a second, and I still had no artwork.
Trying it a third time yielded the same result, with iTunes giving NO indication that it was even TRYING to get the artwork. It will refuse to fetch ANY artwork at this point.
Things you might want to know:
MacBook, iTunes 7.5, MacOS 10.4.10. I repaired the permissions and it still does this. The library in question is on an external drive, but this has not been an issue. This is a fresh install of the OS (and I'm sticking with 10.4.10 on purpose) though the library in question is itself rather old. I'll rebuild it if need be. Can anyone tell me how to preserve ratings and playcounts as well as the dates tracks were added to the library?
Many thanks!The tags for the album may not match exactly what the iTunes Store has — an extra space or capitalized letter can throw it off. If you have an album that you know iTunes can find artwork for, try deleting its existing art and seeing if iTunes will find album art for it again. If it does, you'll know there's something off in your Ryan Adams tags.
-
Profile-based Lens Vignette Correction for Nikon 18-200 - Not Even Close!
Wow. I'm in the process of converting some of my photos from PV2003 to PV2010 and I've been discovering that the profile based lens vignette corrections for my 18-200 are way off. With a profile setting of 100, I have to add a manual amount of about -40 at a midpoint of 95-ish to even it out. DxO's correction is perfect without tweaking - so I know its not a peculiarity of my lens.
PS - The Make, Model, & Profile appear to be correct.
(I haven't checked my other lenses very closely - but I will be)
Anybody else?
RobWhat kind of filter you got stuck on the end of the lens?
-
Download option not showing in MD06 transaction
Hi,
We run the transaction MD06 for MRP list display. Records are showing but there is no option to export / download the records into excel file.
Please let me know how can i download these records in excel format.
Regards..Hi Anil,
When u run MD06 go to MRP list in the header and select print . There you will get option to export.
Hope this will help
Regards
Mahesh M J -
That is all, no more details possible. I tried also uninstall Firefox and install the newest version again, but it did not help. I even have to stop Firefox with the Taskmanager.
As a result I am noew using Google Chrome (and that is not a good solution I think).
So it is not a normal crash and I do not have an ID.
The previous version worked well with me.You might consider connecting it to the charger and charging up the battery overnight.
Please Get the iPod Touch User Manual for iOS 5 -
I cant download anything not even the updates. Is the problem firefox or my computer.
I try to download click potatoe or bearshare or even the updates needed for firefox and they wont download.
I read on another discussion that sucking air out of the headphone slot works, I tried it and guess what, it worked.......weired....apparently something to do with moisture accumulation....!!!!!!
-
I was trying to open facebook and it just stopped without anything really on the screen, the time is working and I can change the volume, but my friend tried to send me a message on another app and it didn't notify me or anything. I bought it used and I don't have a warrenty. Help?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Thenb the remaining items of
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
I opened "yahoomail" in one new tab,mail page asks me to enter "UserName and Password" once typed my details, it allows me to see my mails.Again I opened "yahoomail" in new tab (Still my 1st yahoo mail account in "login" state) to check my other acco
-
Very simple Java AWT Frame resize question
In the following code, I create an awt Frame. Unfortunately, when I run the resulting Java application (on Windows) and use the mouse to resize the window, none of the Frame's resize/setSize methods get called. Can anyone explain why this is? Thanks
-
About the 3rd point of my question
Yesterday I posted my question here. And one said that the 3rd point of my question is not so clear. I am sorry. And I repeated it here. In many cases it is interesting to know where a particular point in the image space moves in the course of time s
-
Printing with Bluetooth - anycom PM300 / HP 5150
I get the following Error Message: The application printer set up utility has unexpectedy quit I am in OSX 10.3.9 I am using a D-Link DBT 120 off my PBG4 Titanium I have the latest HP drivers installed, and I have been to Linex and installed some dri
-
Bonsoir, je souhaite connecter mon iphone 5 avec la 3G mais impossible je suis chez Bouygues télécom. Merci pour votre aide