IWeb page looking jumbled on the net and not my computer

I think this may be the first time I've published my web page to the net with 08 and its not translated some of the images. A couple new pictures i've added are only showing as a question mark and parts of the actual apple template art are also question marks on a page i created a while ago. Also, some fonts are large, etc. I've refreshed and republished several times with no change. something isn't translating or something. If someone could lend a bit of help, this would be much appreciated.
Thanks,
Jason

http://web.mac.com/jasonmccarty/iWeb/Jamison
(notice also how the two photos on the right side are fuzzy and not the ones i've just added.)
and
http://web.mac.com/jasonmccarty/iWeb/mccartyskelowna

Similar Messages

  • I tried to reset my Iphone 5 from the phone and not a computer.  I have had a blank screen with the apple logo and a full progress bar for over an hour.  I cant turn my phone off because the button on top is not working.

    I tried to reset my iphone 5 from the phone and not a computer.  I have had a blank screen with the apple logo and a full progress bar.  I can not get my phone to restart.  What can I do?

    Sorry i meant iOs5 to ios 5.0.1

  • Pages crashes when opening any document on iPad 3 Latest version.   I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create anew document or open a document it just cr

    Pages crashes when opening any document on iPad 3 Latest version. I tried everything I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create a new document or open a document it just crashes out.

    Try this:
    Make sure IOS is updated to latest version
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings

  • I upgraded my 3rd generation ipad to ios 6.0.1 and now am experiencing various issues.  Neither Pages or Numbers will open.  I just see a gray screen that says Pages or Numbers at the top and all of my documents are gone.

    I upgraded my "new ipad" (the 3rd generation I think) to ios 6.0.1 and now am experiencing various issues. 
    1- Neither Pages or Numbers will open.  I just see a gray screen that says Pages or Numbers at the top and all of my documents are gone. The icon that allows me to create a new document also does not appear.  I went to icloud.com to see whether my documents still existed, which brings me to the 2nd problem.
    2- It appears that all of my Pages documents are still on icloud, but all of my Numbers documents are gone.  There were only about 10, but I access 2 of them nearly every day, so this is a big issue for me.
    I went into Settings and all of the icloud information is correct and it "Documents & Data" is on.  When I look at the storage, I see the Pages documents but not the Numbers ones.  The next thing I did was turn my ipad off and back on, but this didn't fix anything.  Since my Pages documents are still on icloud, I then tried to delete the Pages app from the ipad so that I could reinstall it, which resulted in the 3rd problem.
    3- I cannot delete any apps.  I can get all of the icons to shake and the small x IS available, but everything freezes when I click it.  I can't do anything at that point except reset the ipad or wait until it eventually restarts itself.  I've tried this with Pages as well as multiple other apps, all with the same result.  I've also tried downloading a new app (which worked fine) and then deleting that one, but I got the same result.
    3a- A small related issue to this that I am far less concerned about is that when the ipad restarts itself, it comes back on and the screen is really dark and I can barely make out what appears on the screen.  If I enter my password right away, it stays that way until I go into Settings - Brightness & Wallpaper and touch the brightness setting (although I'm not actually changing the setting because it already shows that the brightness is turned up a little over halfway).  If I don't enter my password right away and let it go completely dark, then click the home button, the brightness is fine.
    So now I'm stuck.  My guess is that I will need to restore it, but wanted to check before I take that step.  Unfortunately, my laptop is on its deathbed so I haven't been synching my ipad to it and I fear my Numbers documents are gone forever.  I'd like to try everything I can to fix these issues before doing the restore in hopes that I can get the Numbers documents back.
    Any suggestions for any or all of these problems?

    Purplehiddledog wrote:
    I do backup with iCloud.  I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud. 
    I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
    I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever.  Is that right?
    In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
    If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

  • Firefox 24.0 does not update any YouTube page for the download extensions. Video aivalable for download is the 1th opened in the tab and not the video playing.

    On YouTube, when more than one video have been played, staying on the same page, videos aivalable for download, by any Firefox Download Extension as Downloader Helper, Flash Video Downloader or 1 Click Video Download, are the format options for the first video opened in the tab, and not format options for the video actually playing.
    I have tried resetting Firefox ( Firefox menu : ? \ Troubleshooting Information \ Reset Firefox), and reinstall Videos Downloaders (without Adblock Plus that I normally use), it did not solve the problem.
    Temporary Solution :
    Refreshing the http://www.youtube.com/... page ( by hitting the round arrow at the right of the adress bar ) allows me to update the download features but it is annoying as it restarts the playback every time I decide to download a video ( so is it having to remember to refresh the page ).
    I am surprised it seems no one have experience and solved this problem yet.
    Regards to the team
    Running under
    Windows XP SP3 updated
    Adobe Flash Player 11 ActiveX and Plugin
    Adobe Shockwave Player 12.0
    Java 7 update 25
    Windows Media Format 11
    QuickTime Plugin 7.7.4
    Avast Free Antivirus

    What hardware are you on? Flash is always a finicky beast, especially on older hardware. This is not an entirely uncommon problem. Try looking at this [[Flash Plugin - Keep it up to date and troubleshoot problems|support article]] and see if that helps.

  • I try to generate a chm file over the net and I get a compiling error message

    Hi all,
    I am trying to generate chm files over the net, and the same project when I am generating the same chm locally works fine, however when I am attempting to generate the same chm on a network location, it gives me a compiling error and aborts the generation. It is also keeping the chm file open afterwards, so I have to reboot the machine.
    It is RH7 working on a Windows XP Pro 32 bit.
    Thank you

    It is not a project issue. RoboHelp is just not designed to work that way but like a lot of things, some people can use them outside what they were designed for. However, just because some people can work that way, it does not follow everyone can.
    I've seen people with projects on a network and they say have been doing it for years so it must be OK. A while later they come back and say the problem is fixed since moving it locally.
    Sorry but it looks like you are stuck with working the way you do or getting your colleague to do it. It might be as simple as he is on a different bit of your network.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • I have lost the possibility to control sharpness. I've lost the window to look at for the sharpness and the buttons... I am using a Mac 10.9.5 and Lightroom 5.7.1

    I have lost the possibility to control sharpness. I've lost the window to look at for the sharpness and the buttons... I am using a Mac 10.9.5 and Lightroom 5.7.1

    Hi Jim, thank for the answer. It works thank you very much..
    Kind regards.
    Louis Dijksman
    Op 24 jan. 2015, om 20:55 heeft JimHess <[email protected]> het volgende geschreven:
    I have lost the possibility to control sharpness. I've lost the window to look at for the sharpness and the buttons... I am using a Mac 10.9.5 and Lightroom 5.7.1
    created by JimHess in Photoshop Lightroom - View the full discussion
    I am interpreting that to say that the detail panel is missing your develop module. If that is the case, right-click on one of the other panel headings and make sure there is a checkmark for detail.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7128302#7128302 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7128302#7128302
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Why does my site look nothing like the design and during testing once uploaded to the server?

    Why does my site look nothing like the design and during testing once uploaded to the server?,
    Im using Muse whichj crashes like you would not beleive, but after much perseverance I got a basic 4 page holding site together, I tested the site and it all looked fine, when I uploaded it to the server it looks nothing like the site I tested, to the point that even the background has changed colour and nothing is in the rite place.

    Hi John, Sure it's
    http://www.thezine.co.uk
    thanks
    it should be looking like this

  • Ajax is caching the output and not updating the page.If you force a second postback after you should have seen a popup (but didn'), you then see popup displayed

    Ajax is caching the output and not updating the page.If you force a second postback after you should have seen a popup (but didn'), you then see popup displayed

    Hey, thanks for replying. It is the user who needs to manually submit the page.
    Basically our page has a hidden div with various text fields and combo boxes. When the user click on specific links on the page, this div is populated and made visible to the user in server side code.
    What happens for all other browsers other than firefox 23 onwards (worked fine in 22) is that after the user clicks on the link, our server side code is executed via a HTTP post. The server then renders the hidden div and sends the additional HTML down to the browser via ASP.NET AJAX.
    With Firefox 23, the additional HTML is not rendered on the first postback. Subsequent clicks of the same link execute the same server side code but the additional HTML is rendered on the browser without issue.
    We've done a lot of debugging now and the issue is localised to a specific third party supplier's (Infragistics) control. I think Firefox 23 must have changed the way that the viewport or screen bounds are calculated or reflected back to this control as the issue seems to stop when we remove the control's MaintainPositionOnScroll attribute. It might be that the Firefox 23 DOM is not able to provide the screen dimensions accurately when the page is first rendered. I say this as the second postback renders the additional HTML fine.
    The control in question is quite an old version so I don't think it's your issue to be honest.
    Just so that this might be helpful to other developers using the Infragistics Window Dialog Control, setting MaintainPositionOnScroll to false solved this issue for us.

  • I'm trying to print onto mailing labels, but it won't line up correctly.  It looks right on the template and the 1st row prints right.  The text keeps moving down a line on each row of labels, preventing it from printing the rest of them correctly.

    I'm trying to print onto mailing labels, but it won't line up correctly.  It looks right on the template and the 1st row even prints correctly.  The text keeps moving down a line on each row of labels, so the rest of it will not print correctly.  

    There are several ways you can go about this.
    1. Most labels come with Word templates or downloadable Word templates. Simply open those in Pages.
    2. Make a table with extra cells for the thin spaces between the labels and skinny those down to match the spaces. ie You have big fat cells for the actually labels and thin narrow empty ones for the gaps.
    3. Make a floating Text box the size of one label, format with dummy text just the way you like it.
    +Menu > Format > Advanced > Define as Placeholder text+
    You can now drag and drop snippets of text, the addresses etc onto those and it will replace them matching the style of the existing text.
    You duplicate that text box into position of the other labels by clicking on it with the command kety held down, then drag copy it up or across with the option and shift keys held down. Fine tune the positions with:
    +Inspector > Metrics > Position+
    Peter

  • How to download a file from the net and save it into .txt format in a datab

    Can some one show me a tutorial on how to download a file from the net and save it into .txt format in a database?
    Thank you,

    http://java.sun.com/docs/books/tutorial/networking/urls/readingWriting.html

  • I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem

    I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem

    I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem

  • I am trying to surf the Net and every time I click the SAFARI button, a window pops up saying that this application was closed all of a sudden

    I am trying to surf the Net and every time I click the SAFARI button, a window pops up saying that this application was closed all of a sudden. What can I do to solve this problem?

    How are you connecting to this website?

  • When I single finger click on my iMac Trackpad, on a .pdf document, (happens in a webpage only) Quicktime app. always opens the document and not Adobe or Preview! If a document has severaI Quicktime opens one page only. Can anyone assist?

    When I single finger click on my iMac Trackpad, on a .pdf document, (happens in a webpage only) Quicktime app. always opens the document and not Adobe or Preview! If a document has severaI pages Quicktime will only show one page. So, not very useful!!
    Can anyone assist?

    More threads: https://support.mozilla.org/en-US/search?q=fbi&asked_by=&answered_by=&w=2&a=1&sortby=1&esab=a

  • HELP I have lost all my motion 4 content from all the files, ive looked in all the files and they are all empty. can i get replacement content as I my dvds where stolen along. with my other laptop.

    HELP I have lost all my motion 4 content from all the files, ive looked in all the files and they are all empty. can i get replacement content as I my dvds where stolen along. with my other laptop. any Ideas. would be a great help. For Motion 4.

    Try a hard reset:- hold the home button AND the power switch - ignore the red "Slide to power off" and wait ubntil the iPhone powers down, and then restarts - at the Apple logo, release all the buttons and see if your contacts reappear.

Maybe you are looking for