IWeb page w. 4 different movies creates site with 4 same movies

I can't figure this out...(iWeb '08)
I create a site in iWeb and use the Media window to drag in 4 different movies, each one a couple minutes in length. The site is just how I would like it.
I then publish the site. When I go to view the published site (at me.com), it has published 4 of the same movie. It was like I dragged the same movie in 4 times. I've restarted everything, recreated pages over game...all with no luck. The movies are all in iMovie and held as different projects (that is how I get to them through the inspector).
Any advice? This is driving me nuts!
When I create 4 different pages, each with a different movie, then it will STILL NOT publish correctly, with a different movie on 2 of the pages, and the other 2 the same. I have re-checked everything in iWeb and iMovie and everything appears normal. Ugh!
Thanks!

Try the basic and quick fix of deleting the iWeb preference file, com.apple.iWeb.plist, that resides iny your User/Library/Preferences folder. Then launch iWeb, do a Publish All to MobileMe and see if there's any change.
OT

Similar Messages

  • Can we create same party site with same customer in different OU

    I am able to create same party sites with same customer in different Operating Unit through front end but I am not able to do so using TCA Api HZ_CUST_ACCOUNT_SITE_V2PUB.create_cust_acct_site .I am getting the below error 'Value for cust_account_id - party_site_id must be unique'.Ineed to migrate customer details from one OU to another OU and the party site number need to be same .Can anyone suggest a way in which I can do the above ?
    Reeja

    We can create multiple customer acct site across different OU pointing to same party_site_id with API's also. I am sure that you have initialise the org context in your code somewhere and thus its giving you this error. Reinitialise the org to target org before calling this API.
    Thanks
    Amit Singh

  • HT1390 Why do I get a different movie price for the same movie on my iPad and iPhone. And 1 device says I can rent it but the other doesn't ,.?

    Why do I get a different movie price for the same movie on my iPad and iPhone. And 1 device says I can rent it but the other doesn't ,.?

    Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
    http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
    and here:
    http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
    Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)
    Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
    http://support.apple.com/kb/TS2296

  • How to create directories with same name in different schemas

    I have two schemas on the same database.
    I am trying to create directories with same name, but different paths in both the schemas.
    When i created the directories in second schema, the directory paths of the first schema are automatically changed to the second path.
    Is there any solution to create directories with same name, but different path in two different schemas on the same database.
    Thanks,
    Sridhar.

    Hi,
    >>When i created the directories in second schema, the directory paths of the first schema are automatically changed to the second path.
    If you have removed the REPLACE clause of your create statement, then you would see that is not possible.
    SYSTEM> connect scott/tiger
    Connected.
    SCOTT> create directory mydir as '/tmp';
    Directory created.
    SCOTT> connect legatti/pwd
    Connected.
    LEGATTI> create directory mydir as '/tmp';
    create directory mydir as '/tmp'
    ERROR at line 1:
    ORA-00955: name is already used by an existing object
    LEGATTI> select owner,object_name,object_type,created
      2  from dba_objects where object_name='MYDIR';
    OWNER     OBJECT_NAME    OBJECT_TYPE         CREATED
    SYS       MYDIR          DIRECTORY           19/12/2007Cheers
    Legatti

  • Creating Equipment With Same Equipment No. In Different Maintenance Plant

    Dear Gurus,
    Is it possible to create equipment with same equipment No. (external Numbering) in different maintenance plant of same company code?
    We have 2 plants, plant 1000 & plant 1100 & the geographlocal locations are different. These 2 manufacturing plants belong to same company code. We have implemented plant maintenance system for plant 1000 & now want to roll out the same system at plant 1100. In plant 1000 we have equipment with equipment No. M323 (External Number). Now we want to create equipment with same no. in plant 1100. How can this be done? or is it necessary to have different no.? please advice.
    Regards,
    Abhijit Khandekar

    Dear Friend
    As Equipment master data is client specific, you cannot have the same equipment number for same category of equipment, though plants are different.
    Yes, you can do it if equipment categories are different.
    I hope this will resolve your query if not let me know.
    Regards
    Makarand Gurjar
    SAP PM consultant

  • Publishing iWeb pages from 2 different Macs

    I have recently bought a MacBook to complement my G4 Powermac desktop - the desktop has iLife05 installed and the MacBook iLife06.
    I am really enjoying using the iWeb application and would like to be able to publish iWeb pages from both my MacBook and my desktop mac. Is there anyway I can get iLife06 transferred onto my desktop. I have already been firewiring files between the two - can I do the same with software or do I need to buy iLife all over again?
    Powermac G4 Dual 1.42GHz    

    Hi James,
    Your response definitely helped me since my boss and I are trying to maintain a website on both of our computers...
    BUT, i have a huge problem. Before I knew how to transfer or find the domain files, I used the "FIND" option to search for the domain site on my computer and when i clicked it open, my site didn't come up but rather a prompt asking me what type of website I'd like to create. For months, the website we created showed up every time I opened iweb but now when i simply clicked on domain.site or whatever it was that turned up in the "Find" folder, I can't bring up or locate the site I created on the computer so I have no way to update it or put it on a disc for my boss... Do you have any idea what caused my site to disappear simply by clicking on domain or any idea where i could find my site??
    please help!! thanks!
    Vanessa
    one more thing: is it possible for my boss to edit the content of the website without iweb? could she do it through the actual website with a password or something? just curious... also if i can't get that original domain site back, is there a way i can transfer my website to a different website other than iweb so that i can keep updating without having to redo the whole thing? even being able to transfer separate blogs from iweb to the original site would work too - anything to not have to redo the welcome page and picture pages that are already online

  • Can you work on the same iweb page on 2 different computers?

    hi, i usually work on my imac doing my iweb pages, i would like to work on a second ibook that is in the house. i've tried and tried but can't find a way for the ibook one to pick up the pages. it has the same .mac idisk folder as the other mac with the iweb backup but won't start up with the iweb pages, the iweb starts up blank asking for its first page.
    is there a way?
    thanks

    Chuck thanks, I found I can do it from that post, all you need to do is copy the iweb main folder to a USB mini, then I replace the iWeb folder in the next machine... it works great, you just have to remember to update it when you leave one machine and add the update to the next.

  • Manage site with same IP but different port

    My computer was updated from Windows XP to Windows 7 and I'm still using CS6.  I can not manage two different sites with the same IP address but one has a different port number.
    I have it set on Docuemnt Root but apparently it doesn't matter because I'm having the same issue if I change it to site root.
    This is what I get to preview:
    file:///B:/Admin/facility-management-leasing/facility-management/forms.shtml  instead of
    http://168.40.15.60:81/Admin/facility-management-leasing/facility-management/forms.shtml
    I have the same IP address with out a port to another location
    I'm getting file:///W:/news/Announcements.html instead of http://168.40.15.60//news/Announcements.html
    Please help this is past frustrating!!!!!
    Debby

    Make two different site definitions.

  • Adding a Second Project Site with same restore data

    This is the first time I've had to accomplish this 
    I have a dev server where I restore a backup from 2 weeks ago to http://devserver/pwa
    My team has asked for a restore from 2 weeks + 1 day to http://devserver:99/pwa - I've tried deleting site collections, tried several other ways of doing the restore; however, during the mount-spdatabase I get only 1 site to come back (pwa)  but
    it doesnt show in the site list
    The enumallwebs shows the following (notice the in sitemap)
    stsadm -o enumallwebs -databasename content_database  
    databse site count 1
    <site ID = random characters > <owner = farmguy> <In sitemap = False>
    Web count = 235
    ==============
    I believe/know the issue deals with the same site ID being on the first pwa site; however when I try to do a Mount-SPContentDatabase content-database -WebApplication "http://dev:99" -AssignNewDatabaseID I still get the same issues - new database
    ID but still same site ID for the "dev/pwa" site database
    Is there anyway to clone (yes I've seen the other articles) or have two sites with the same data?
    I've also thought about trying to export the stsadm enumallwebs data and copying that to a new PWA site but have been unsuccessful in the export (or even finding a way to do it)
    Can I get any ideas on how to either
    1) Change the site ID from a database backup/restore
    2) Restore a PWA site to the same server/database server 
    3) other ideas?
    My team members would like to do a comparison of the two dates between a project to check for differences (I just found out about
    FluentPro Audit Lite Pro)  
    Any and all suggestions would be appreciated... 
    Thank you 

    I'm still experiencing issues
    I tried the following (http://social.technet.microsoft.com/Forums/projectserver/en-US/edc6f56a-5850-4102-841b-32d4df6e6882/how-i-to-restore-the-project-site-deleted-on-project-server-2010-?forum=projectserver2010general) by recovering the data from an unattached
    Database (I also did the site collection backup)
    1) Trying to do an Import-SPWeb but this was unsuccessful
    created a web application 99 -> provisioned a pwa with the old databases -> data appear in project center but when you click on the sites it gives an error message
    created a web application 99 -> create a site collection -> provisioned a pwa with the old databases -> data appear in project center but when you click on the sites it gives an error message - same as above
    the below while it held promise it didnt work for going against a separate port... using the data from an unattached content database export (link above)
    also reference (http://pwmather.wordpress.com/2012/06/28/move-a-sharepoint-2010-sub-site-to-a-different-location-on-the-same-farm-sp2010-ps2010-powershell/) 
    2) Tried to do a SPSite Restore and it ends up deleting the provisioned PWA and still appears to be there but no PWA soo 
    3) removing the ophaned PWA site (http://mrhodes.net/2011/02/24/fixing-an-orphaned-site-collection-within-project-server-2010/) wont help since it will remove the PWA sites/subsites from the content database I want
    4) I'm still unsure how to approach what Krishnp stated...
    unless #2 was his approach
    Any other help would be greatly appreciated - I'm trying everything it's time consuming since the backup files take over an hour to restore to a site - while it is faster to do the original when its just one content database/4 pwa databases... 
    I've read its possible to do to different ports (of course I closed the page) but I have only seen one post point it out 
    thanks again 

  • New GL acc for COGS with same movement type

    Hi
    I have  a requirement where i want to assign the new GL account to the COGS simulataneouly using the existing one.
    i dont want to create a new movement type.
    i want to use a same movement type, same valution class.
    Can this be met by using a new Acc modifier?
    How can this be acheive
    Regards,
    DDP

    HI
    Yes i am talking about 601 movement type
    We want to now send a existing material from different plant also.
    currently we are sending it from "A" plant
    NOw we want to send it from "B" plant also.
    In both the above cases we want different COGS account (valuation class will remain same)
    Hope this is clear
    Revert in case of queries

  • Create Equipment with same Number rang at Diff Equipment Catagory

    Hallo Guys,
    client bymistake created some equipments which are actually PRT with catagory M ( Machine)
    now they made deletion indicator to that and inactive the part and now want to create same machine as a PRT with same number range interval
    as that of made at machine, but as per std system is not allowing to create duplicate records.
    How to achive this ?
    Regards,
    Rip

    If no Equipments were created after the Deleted Equipments then you may have an option.
    Tcode OIEN
    Go to Number range interval, Then the Current number  can be changed as under. Reduce this Current number by those many equipments. Then new equipments will have the same numbers of the deleted equipments
    You should do it in trial servers and if suits to you then you can decide to go ahead. You should be prepared to have filters in Selection-screes to avoid the DLFL INAC equipments appear in the reports
    Jogeswara Rao K

  • How to export edited GoPro mov from Premiere with same settings & similar size?

    I feel like this should be easy but every time I try to export my edited video it's much bigger than the original, or it's smaller and bad quality.
    My business partner sent me a 720p GoPro MOV that is 33:50 long and 1.78GB. I edited out 3 minutes and want to render in the same quality.
    I've tried exporting as MOV and MP4 with various settings and it either ends up huge, like 25GB or more, or half the size and terrible quality.
    I also tried rendering "match sequence settings" and it chooses a GoPro codec with a weird file extension (MXF).
    The closest I've gotten is H.264 "Match Source - High bitrate" but that's still 2.29GB
    Thanks,
    Phil

    i would guess the gopro MOV file that was sent to you is h264. you can adjust the bitrate on export to h264 from premiere so its smaller. if you want more compression with sightly better quality you will have to export as dnxhd/prores or even uncompressed and then use a program like handbrake to transcode to x264 or x265.

  • My iWeb page has a different font when shown on a windows vomputer how come????

    when my web page is shown on a windows computer, the font changes... how come?

    iweb has something called fontmapping, this is defined in one of its plist file.
    here are couple links about it in a few years back:
    http://11mystics.com/2008/10/06/faq-managing-the-way-fonts-display-on-a-windows- pc/
    http://11mystics.com/2007/09/12/how-can-i-ensure-the-fonts-i-use-will-look-good- on-a-pc/
    now, it's depend on the font, you can use web safe font or not... it's up to you.
    to use none web safe font, you can use css @font-face....
    or you can use Cufon: http://cufon.shoqolate.com/generate/
    here is Cufon exmaple: http://home.cyclosaurus.com/_Cyclosaurus.html

  • How do I remove old web site when publishing new site with same URL in iweb? Hit replace when publishing new iweb site (so we could have control over changes) but new site name is attached to old via a / after our www address we want to keep.

    I hit the replace when publishing the new iweb site (so we could have control over changes - last one was not an apple based site) but new site name is attached to old via a forward slash and underscore after our www address. Makes it very messy with a very long web address.  Original address now followed by iweb site name followed by name of first page? Went for iweb as not that computer literate - all going so well?! Cheers for help in anticipation. Have to get off to work now but be great end to week if we could be sorted tonight. Rupes

    Well yes of course, if you try and publish through iWeb there won't be an option to publish without your site folder which is exactly why I told you to download Cyberduck and use Cyberduck to upload your site to your server having published your site from iWeb to a local folder.  That is what you need to do if you don't want your site name to be included in yoru url.
    It would have been easier also if you had used Cyberduck initially to connect to your server and delete your old site yourself - at least that way you would have deleted the correct files rather than relying on your hosting service to do it and doing it incorrectly.
    Download Cyberduck and then select the publish to a local folder option from iWeb and then use Cyberduck to upload your site to your server, but rather than uploading the whole site folder and separate index file, upload ONLY the contents of your site folder and then your url will be http://www.domain.com/page_name.html.
    It really isn't rocket science!

  • Creating slideshow with AVI movie files in iDVD 06?

    Today I was trying to create a slideshow movie with iDVD. I had some AVI movie files that came from my Canon digital camera. I wasnt able to drag them into the slideshow well, so I thought I had to convert them to a .mov file, after converting them I still wasnt able to use them. Is it possible to make a slideshow with movie files as well as pictures in iDVD 06? I know for a fact that I can do this on iDVD 08, so is it possible? thanks in advance.

    Slideshows using movies is just an iLife '08 thing.
    I suggest you do what I do. Use VisualHub to convert the AVI slideshows to DV video movies. The DV video will work great in iDVD 6 when put on a menu page.

Maybe you are looking for