IWeb pages after content long and blank?

As you will see by clicking on the following link on the right hand side the scroll seems to go down for a long time after the content and its all blank...
Anyone know how to get rid of this?
http://www.brucewatt.co.nz/Bruce_Watt_Photography/Home.html

I should have mentioned… it's possible you have something "invisible" that is growing the length… I think I had that problem once, it was in the footer…. and I know I've read that other's have had that problem… not really a 'problem', however. 
I'd click just below your current content… drag across the page then down to the end to check to see if anything is there. - JamesJM

Similar Messages

  • In indianvisa App. page; when I clicking a link in this page after a long time (2 hours), it shows me session expired. how can i solve it? Please.

    http://indianvisa-bangladesh.nic.in/visa/indianVisaRegDetails.jsp; this is page link. I want to stay in this page for a long time but i can't, they show me a message "session expired". Also I set an add-on namely Session Keeper but don't implement it. Please solve my issue.
    Thanks
    Bishwajit Das

    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache and
    * Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
    Type '''about:preferences'''<Enter> in the address bar.
    * '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
    * '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
    If there is still a problem,
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • List of windows under menu "Window" ridiculously long and blank

    Mac OS 10.9.1 & Firefox 26: After running Firefox for several minutes, if I click on "Window" from the menu, as if I wanted to switch between open Firefox windows, the drop down list of open windows is unrealistically long and yet blank. This doesn't seem to be triggered by specific sites or by popup windows. I've rest Firefox, but the problem persists. It does nothing to hinder performance, but I worry that it is a symptom of a bigger problem.

    Much appreciated, cor-el, but that didn't do the trick.

  • Established wifi connection, web pages all load white and blank

    Hey so my MacBook Pro retina display has never had any problems with Internet, but now when I am connected to my normal wifi, all of my web pages through safari are loading blank and white. Safari is the only search engine I have downloaded (dumb I know) so I have no way of checking if it is only te browser, but I don't think so because on another computer the Internet is working fine. It is the same story for different wifi channels too so I am thinking it is something with my computer. Does anyone have anything they think will solve my problem so my web pages actually load again? Thanks!!!

    Go step by step and test.
    1. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Uncheck the box next to  " Remove saved names and passwords".
        Click "Reset".
    2.  Empty Caches
        Quit Safari if open.
        Option click the "Go" menu in the Finder menu bar.
        Select "Library" and then "Caches".
        Look for the folder 'com.apple.Safari"
        Right click "com.apple.Safari" and select "Move to Trash"
        Relaunch Safari.
    3. Turn off Extensions, if any.
        Safari > Preferences > Extensions
    4. Delete safari .plist file.
        Quit all applications.
        Option click the "Go" menu in the Finder menu bar.
        Select "Library" from the drop down.
        Library > Preferences >  com.apple.Safari.plist
        Right click it and select "Move it to Trash".
        Restart.    Relaunch Safari.
    Best.

  • Symbol on iWeb page after publishing

    Hello - I hope someone can help - I'm very new to iWeb ...  After updating a page  - the following image appears on the published site - but I can't see it on the page before publishing ?

    Whatever browser you use, if an image is missing, then it will be missing with all browsers.
    Anyway, this is missing :
    http://jimmyhogarth.com/Jimmy_Hogarth/kid_gloves_files/bg.jpg
    Should probably be this one :
    http://jimmyhogarth.com/Jimmy_Hogarth/Home_files/bg.jpg
    And a shape is missing :
    http://jimmyhogarth.com/Jimmy_Hogarth/kid_gloves_files/shapeimage_3.jpg
    So check for their presence on the server.
    Not much one can do in this forum.

  • Adding material to an iWeb page after it is published

    I have published a very simple two page web page on dotmac. There is a very short introduction and then about 15 photos. (Actually, the topic is about a 100th birthday) (The terminology of the web is confusing here: one web page can contain many pages. Is there a name for the subsequent 'pages' of a web page?)
    I wish to add some more photos, separately, on a completely unrelated topic to the original ones along with some additional text. I wish the new photos to be separate from the first photos and the additional text to be separate also.
    I do not see how to do this and any advice would be most welcome.
    David Amies

    (The terminology of the web is confusing here: one web page can contain
    many pages. Is there a name for the subsequent 'pages' of a web page?)
    David,
    The appropriate terminolgy is that a 'site' can be made up of several 'pages'. In iWeb this distinction is indicated in the Site Organizer by the fact that Site names are in bold type and have a globe icon beside them. The pages within sites are indented. The icon in this case looks like a page with the top corner turned down.
    I wish the new photos to be separate from the first photos
    and the additional text to be separate also.
    It would help if you could provide the address of your site. Judging from what you describe, though, I would suggest that you repeat what you've already done with your first photo page. Use the + button at the bottom left of the iWeb window, select the Photos page from your preferred template, replace the placeholder text with your own, drag in your photos to replace the placeholder ones, and re-publish.
    [ Visit here for iWeb Tips, Tricks and Hacks ]

  • It takes 1 min   to change pages after clicking on and the ferris wheel just turns and turns forever

    Why does it take 1 min or longer to change screens after clicking on one.?

    What year, screen size, CPU speed and amount of RAM installed?
    How full is your Mac's hard drive?
    How many applications do you run simultaneously in the background while working in another application?
    Do you run any antivirus software on your Mac? Antivirus software can slow down the normal operation of OS X.
    Do you run any "crapware" like Mackeeper or any other type of "crapware" like so called hard drive "cleaning" apps?
    Have you downloaded and installed anything from the Internet, recently?
    Also, so I cover all of the bases from now on, your iMac's hard may, possibly, be failing.

  • Lost iweb pages after format.

    I started my website when i had ilife 06.
    Now i had to reformat and have loas all mt saved iweb things....
    How do i connect iweb upto my .mac site again? is there a way?

    Sorry, but you can not import the files back into iweb.
    Without the "domain" file your starting over.
    If you had backed that file up you would be ok.
    In the future it's located in your account library/application support/iweb

  • Why "Tuvaro" is highjacking my computor and home page after down loading and installing firefox ?

    when ever I down load and install fire fox the home page is automatically changed in to "Tuvaro" and changes all settings. I tried several times, and the same repeated. so I totally uninstalled from my system and like to reinstall without Tuvaro. is it possible ? I am using acer i5 with window7. 64 bit.

    Dear Mr. Philipp, thank you very much for your help and support. I could solve the problem much easier than I thought and regain the fire fox without "Tuvaro". thanking you once again, with regards.

  • Double sided printing, adding blank page after two different groups

    Post Author: adepper
    CA Forum: General
    I have created a report that is structured as such:
    Group 1 - Based on formula, groups by type
    Group 2 - Based on formula, groups by use
    Group 3 - use (pulled directly from Database)
    Group 4 - ID
    I have the report printing an extra page after group 3.  I used this formula in the Section Expert - New Page After
    remainder(pagenumber,2)=0
    I also use that formula to reset the page number
    What I would like to do is print a second blank page if group 2 does not start on the top of the page, meaning I do not want either group 3 or group 2 to start on the back of a page, so that this report can be placed in a binder, with dividers.
    I have group 3 giving me a blank page with no issues, it is just group 2.
    Any help and/or suggestions would be appreciated.  If I did not give enough details, I am sorry.
    Thanks!

    Post Author: adepper
    CA Forum: General
    After a lot of blood, sweat and tears, not to mention a lot of curse words directed at the computer, I was able to get this to work.  Now I just have to do it for three groupings instead of two (deliver the impossible to your bosses, and they turn around and move the brass ring right out of reach again!)
    In case anyone is interested in how I was able to manage this (I found many sites where people asked this question, but not one complete answer), this is what I did:
    In the footer section:
    Group 4 - ID (database field)
    Group 3 - PrimeUse (database field)
        3a - Contains data
        3b - Contains data
        3c - New Page After, Keep Together, and Reset Page Number After are all checked.  In the condition for Reset Page Number After I also have this formula:
        remainder(pagenumber,2)=0
        3d - New Page After, Keep Together, and Reset Page Number After are all checked.  In the condition for New Page After I have this formula:
        remainder(pagenumber,2)=0
    Group 2 - Suppressed
    Group 1 - Grouped by Store Type -
        1a - Suppressed, New Page After and Keep Together are all checked.
        1b - New Page After and Keep Together are checked.  In the condition for New Page After I have to following formula:
        remainder(totalpagecount,2)=1
    If anyone sees any errors, or if you think you can get it so that I get another page blank, after Group 1, if the Group starts on an even numbered page, I would appreciate the help.
    Thanks!

  • How can I edit or remove iWeb pages from Mobile me after I have published it to another site?

    I have published iweb pages to another server and now I need to replace the mobile me version with page "pages moved to..." or at least I need to delete old version. However I can't find any way to do this from mobile me or from iWeb.
    From Mobile me I cant find any way to even delete pages.
    With iWeb I cant edit the old version because I cant find way to have two version of same pages. As I understand what I need is a version of my republished pages that only contains the index page "pages moved to...". But I cant create that because I cant have two versions.
    Yours Mika

    Go here : https://www.me.com/idisk/
    Then follow the folders :

  • Adding Flickr to iWeb page

    Hi. I'm trying to add a link to my iWeb pages which has my Flickr photos on. How do I do it? I know how to just add an ordinary link, but I want to to add one of those links that I see on other blogs that show little thumbnails of the photos.
    Hope it makes sense!

    If you can get the code from Flickr, you can add it to your iWeb page after publishing.
    Here are some basic instructions for making html changes after publishing in iWeb:
    1. Type a placeholder in place of where you want the item to go. i.e. CODEGOESHERE or something like that. Publish your site via iWeb
    2. Find your html files.
    Go to iDisk/Web/Sites/iWeb/Sitename/Pagename.html
    (If you publish to a folder, look in the folder you selected or try looking in your Sites folder of your home folder. )
    There are two ways to handle accessing your iDisk.
    Method 1:
    Turn on local copy of your iDisk in System Prefs, with or without automatic syncing.
    If you publish your site via iWeb, now the updated pages exist online but the old pages are on your local iDisk. You need to sync (automatically or manually) to get the new pages on your local iDisk (on your computer).
    Then you can open the updated files, make your html changes in Text Edit or whatever program, and SYNC AGAIN (automatically or manually) to update the online version of the site to match what you have just changed on your local iDisk
    Method 2:
    Mount the iDisk when needed via the "Go" menu in Finder. This is the ONLINE VERSION of your iDisk, not a local copy. When you publish your site via iWeb, the changes INSTANTLY appear on the iDisk on your desktop. If you make html edits or other changes, they appear INSTANTLY online.
    I recommend Method 2 - much easier!!!
    3. Make the html changes.
    You can open the html files generated by iWeb in any text or html editor. In TextEdit, to view the code in an HTML file, choose File > Open and select "Ignore rich text commands." Then locate the .html file (as described in step 2) and click Open.
    Make your changes (i.e. replace CODEGOESGERE with your code!) and don't forget to save your changes (not Save As, just Save)!!!
    4. Remember, if you make a change to a page like this post-publishing, and later re-publish, you have to make the html changes again! Set up a Find/Replace command in MassReplaceIt and you can do this very quickly. You can save your queries so you can make all of your changes with one click the next time you save.
    Download here:
    http://www.hexmonkeysoftware.com

  • T60 exhibiting 1 long and 2 short beep and black screen

    Hello all,
     i own a thinkpad t60 with ATI radeon x1300 graphics card. I read through your complete "T61p exhibiting 1 long and 2 short beep and black screen" thread and I have the same beep problem with my t60. Let me briefly explain you how the beeps occur in my system:
    My t60 had this problem after I initally formatted my system and this 1 long and 2 short beeps used started occuring. But the strangest fact is that after those beeps and blank screen, the power light in the indicator light group is on along with battery and ac power lights. But then when I repeatedly switched on and off the system, the sequence of beeps dont occur all the time. Then I completely switched off the system and when I booted the next times I started pressing the ESC keys after pressing the on button. Most of the times ( 8 out of 10 times), the first 4 times it produced the same beep codes but after the 5th time, the system turns on.  All those 5 times, I kept on pressing the ESC key once I powered on the system.
    Also, every time I'd a chance I did run the pc doctor to find any pro blem with the board or video card, but every time it turned out to be fine. So now,every time I turn my system off or use a stanby/hibernate whichever turns the screeen off, on immediate reboot it comes out blank but with the power indicator light on.
    Here by I also list any changes that I'd made:
    1. I reformatted the system and only then this started to occur.
    2. after reformatting lsat time, I forgot to change the boot sequence but now I;d fixed that by pressing F9 under startup in bios.
    3. I'd also once replaced my RAM with a different one (have 4gb now, but I suppose t60 can support a max of 3gb). WIll this be a problem?
    4. And in the recent times due to the ati3duag.dll BSOD has occured. Any idea what this error might be due to?
    5. Due to all these uncertainities, I havent updated tot he latest ATI driver which is 8.593 * and I still have the 8.293* . Will updating to the new one be a problem?
    I appreciate any help or guidance you can give me in this matter and I badly need to fix it for my projects.
    Thanks
    Vishak

    I think your best way of diagnosing this is to remove the new ram and install only one chip, if the problem persists, try the other. If the problem persists, then I'd try booting from a Linux LiveCD (any will do but I'd recommend ubuntu.com). boot with the option to not change anything on your PC. If you get this same problem when booting linux, then you know it's a hardware problem, in which case I'd remove as much hardware as possible, drives, cards, etc... if it still persists, then you most likely have a bad system board. In this unfortunate event your best option would be a used one. A new one would cost more then the laptop is worth, but used T60 boards are pretty reasonable, I just found one for another member and could probably help you find one to if necessary, but lets hope it's just a ram chip. And by the way, your system is limited to 3GB, but in the chipset, and in your 32bit OS they came installed with. You can install 4GB, but it won't be able to use it all.
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • Best way to refresh page after returning from task flow?

    Hello -
    (Using jdev 11g release 1)
    What is the best way to refresh data in a page after navigating to and returning from a task flow with an isolated data control scope where that data is changed and commited to the database?
    I have 2 bounded task flows: list-records-tf and edit-record-tf
    Both use page fragments
    list-records-tf has a list.jsff fragment and a task flow call to edit-record-tf
    The list.jsff page has a table of records that a user can click on and a button which, when pressed, will pass control to the edit-record-tf call. (There are also set property listeners on the button to set values in the request that are used as parameters to edit-record-tf.)
    The edit-record-tf always begins a new transaction and does not share data controls with the calling task flow. It consists of an application module call to set up the model according to the parameters passed in (edit record X or create new record Y or...etc.), a page fragment with a form to allow users to edit the record, and 2 different task flow returns for saving/cancelling the transaction.
    Back to the question - when I change a record in the edit page, the changes do not show up on the list page until I requery the data set. What is the best way to get the list page to refresh itself automatically upon return from the edit-record-tf?
    (If I ran the edit task flow in a popup dialog I could just use the return listener on the command component that launched the popup. But I don't want to run this in a dialog.)
    Thank you for reading my question.

    What if you have the bean which has refresh method as TF param? Call that method after you save the data. or use contextual event.

  • Transfer my iWeb pages to my new hard drive

    I lost my hard drive and everything on it. The good news is that most of what I need was backed up on .Mac. I need to know how to transfer my iWeb pages that are published and on .Mac, back to my new hard drive.

    Wyodor wrote:
    The OP is from Las Vegas, not Hawaii
    hmmm... What an oversight on my part... What about "Howdy!" would that fit better?
    Goede dag,
    Cédric

Maybe you are looking for