Iweb pages hosted on a web server do not look right. Funny characters appea

any web experts here?
I have designed a bunch of pages in iWeb. Published them and uploaded them to my web host. However when I view the files via the web, they are not correct. The most obvious is that quote marks, bullets and paragraph markers are shown with funny characters.
Take a look at www.dancingacademy.co.uk to see an example. Excuse the URL but its the only way I know of showing an example of what's wrong.
If I view the files locally on my mac (ie publish from iweb to a folder and open them from the local folder) then the files look fine.
It's only when they get sent from a webserver they look funny.
Any ideas what my web hosting company is doing wrong?

The server you are using is (mis)configured to force all browsers to use the wrong encoding. See this note (Server Settings section) for possible fixes:
http://homepage.mac.com/thgewecke/iwebchars.html

Similar Messages

  • After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

    Hi
    After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right. 
    I can't see menus, just version number and the basic setup page.
    Router Linksys WRT160 v2.
    Allan

    Hi
    Thanks for the reply.  
    I't works ok now.  
    Thanks again.
    Allan

  • How can i see visitor statistics for web page hosted on osx lion server

    Hello
    how can i see visitor statistics for web page hosted on osx lion server
    Thanks
    Adrian

    Just click inside the url address bar. Full url address highlighted, will appear.
    Best.

  • I can't cap the number of active downloads (via persistent-connection-to-server cap) AND still be able to load pages hosted on the same server, *because*...?

    I'm aware that, by setting "network.http.max-persistent-connections-per-server" (in about:config) to 1, I'm effectively preventing myself from being able to download a single file from a server AND load a page hosted on the same server simultaneously.
    My question is, why can't Firefox tell the difference between a file download and loading a website?
    The reason I ask is that I feel I should be able to create a download queue and have my browser download one file at a time (to minimize the impact downloads have on available bandwidth and my own downstream, while allowing me to set up a long chain of sequential downloads), YET still be able to browse websites hosted on the same server.
    I do not want to use an add-on or a separate download manager to solve this problem. I think that's stupid. Firefox should be able to tell the difference between a request to load an html file and a request to download any other type of file.
    After all, I can already configure Firefox's file handling behavior for each type separately (I have, for example, previously set PDF files to prompt me to "Save as...", in order to prevent exploits from triggering when I click on a link, by preventing Firefox from opening them in-browser).
    There is no reason I shouldn't be able to do what I have said I would like to. I should not HAVE to limit the number of max server connections in order to ACHIEVE filling a simple download queue with a 1-file-at-a-time limit.

    In your Keychain under 'login' delete the VeriSign certificates and then quit and restart all browsers/itunes/app store.
    http://apple.stackexchange.com/questions/180570/invalid-certificate-after-securi ty-update-2015-004-in-mavericks

  • XML IDOC data (hosted on a web server)   &  handling multiple WSDLs

    Hi ALL,
    1)how to design an Interface for picking up an XML IDOC data (hosted on a web server) which will be uploaded to SAP or converted to a file
    this is what the customer has given me ..can any one explain me this and help me how to more forward
    2).This Interface must use UDDI concept because we are going to use multiple BAPIs /RFCs as WSDLs
    what is this mean can any send me some document on this
    3).Use web-service navigator concept as we will be handling multiple WSDLs
    i worked on 1. to define a place holder in WebAS for holding the
    wsdls.
    2. publish the wsdls in WebAS UDDI Repostory
    but i have never used web-service navigator concept as we will be handling multiple WSDLs what is the difference ..send me some step by step docs ..
    thanks very much
    RK..

    1.I am not clear with the requirement too. THere is no big deal in sending XML to IDOC or File. Based on your requirement you have to import IDOC structure or ify ou are using file, create a structure for the file.
    If u are asking about sendin the XML directly without mapping, even you can do that without MM and even IM.
    Please be more elaborate and if you are not clear with what client said, paraphrase them or ask again. Its not good to start work unless we are very clear with the requirement.
    you can say to my understanding i feel this, now pI will send data like this. Is it correct?
    2. More information on UDDI
    http://en.wikipedia.org/wiki/UDDI
    I dont think you need to worry much about this now with many features provided in ESR especially
    3. http://<Host>:<port>/wsnavigator/
    The webservices going out of PI are published here.
    provide host and port are host and port details of ext system.
    Once you enter link in your browser, it shows the available webservices hosted there.
    All you need is to click on the required wsdl and test it.
    It is as good as sending your data from PI to other system.
    It is similar to Altova XML spy but the difference here is you enter the values directly here but in XML spy we send XML .

  • Can print test pages from embedded web server., put not from windows

    Hello,
    I have a P1102w that worked perfectly through the last 5 month.
    Two days ago it stopped printing anything for some reason. What happen is, when I print something, it spools, but then I get Error-Printing under the status when I double click the printer icon in the "devices and printers" manager of windows 7.
    Right now I can see the printer in Ad Hoc. I can load the embedded web server,. And I can print test pages from the embedded web server.
    However, if I tried to print test pages using the printer icon in "devices and printers" manager".. it doesnt print!
    If I go to Devices and Printers -> Properties -> Advanced -> "Print directly to printer" -> Apply
    I got an error box: "Printer settings could not be saved. Operation could not be completed (error 0x0000070c)."
     The printer works fine when connected to other laptops (with exactly the same driver/setting)..
    This problem is driving me crazy !
    Thank you in advance for your help

    Hi m-rasheed, 
    An ad-hoc connections is much more unstable than an infrustructure network using a router. At this point i would suggest getting a wireless router, and then connect the printer to your network through the router. 
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02847467&tmp_task=useCategory&cc=us&dlc=en&lang...
    Routers:
    http://www.shopping.hp.com/webapp/shopping/can.do?storeName=accessories&landing=computer&category=ca...
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Access websites hosted on local web server

    Hi there,
    I have a Cisco ASA 5505 in my home office which has a few PCs behind it with a linux web server running some websites. I can access the websites from outside no problem (i.e. on my iPhone using a 3G connection). However, I struggle to access the websites from within the network. The ASA gives me this error:
    6
    May 05 2013
    11:52:27
    192.168.55.61
    50420
    Failed to locate egress interface for TCP from inside:192.168.55.61/50420 to 86.*.*.*/80
    ASA runs version 9. Here is the config bit:
    object network denon-server
    host 192.168.55.200
    access-list outside_access_in extended permit tcp any object denon-server eq www
    object network denon-server
    nat (any,outside) static interface service tcp www www
    Any suggestions?

    Hi,
    I assume that you are trying to reach the LAN server with the public IP address that the ASA holds and also uses for the above Port Forward / Static PAT configuration?
    If this is the situation then I am afraid that with the current configuration that is not possible. The NAT configuration towards Internet is done between probably "inside" and "outside". So "outside" interface holds the public IP address. ASA doesnt let you connect to that "outside" IP address from behind the "inside" IP address. (Or any other interface for that matter)
    What you could try to do is configure a NAT that would enable you to use the public IP address of the server even when connecting from the "inside" of ASA.
    Try this
    object network SERVER-LOCAL
    host 192.168.55.200
    object network SERVER-PUBLIC
    host 86.x.x.x
    object network LAN
    subnet 192.168.55.0 255.255.255.0
    nat (inside,inside) source dynamic LAN interface destination static SERVER-PUBLIC SERVER-LOCAL
    Where
    SERVER-LOCAL = Is the "object" that defines the real IP address of the server
    SERVER-PUBLIC = Is the "object" that defines the public IP address of the server (that ASA holds on its "outside")
    LAN = Is the "object" that defines the subnet from where LAN users connect to the server public IP address
    Check that the network mask is correct for the LAN and fill in the public IP address.
    The actual NAT configuration tells the ASA this
    When a connection from LAN is coming towards SERVER-PUBLIC then UN-NAT SERVER-PUBLIC to SERVER-LOCAL and NAT LAN to "inside" interface IP address (as defined by the parameter "interface" in the configuration)
    This should enable the LAN hosts to use the public IP address to connect to the server. The server though will see the connections coming from the ASA "inside" interface IP address.
    Hope this helps
    Please remember to mark a correct reply as the correct answer if it did answer. And/or rate helpfull answers
    Ask more if needed.
    - Jouni

  • Crystal report viewer are displaying blank page after deploying in web server

    Dear friends,
                       i have designed crystal report (in VS2010 &  CRRuntime_64bit_13_0_6 installed in web server) it's working fine in local machine even web server also but in http://localhost, if i change from localhost to my domain name or local IP address(like http://192.168.1.71) then it's getting blank page.
    but same report if i open in pdf format it's working fine.
    I have tried the following one. But this is not working for me.
    Copy the entire Crystal Report Support folder
    C:\inetpub\wwwroot\aspnet_client\system_web\4_0_30319\crystalreportviewers13
    in web.config, the below code also added.
    <sectionGroup name="businessObjects">
          <sectionGroup name="crystalReports">
            <section name="crystalReportViewer" type="System.Configuration.NameValueSectionHandler" />
          </sectionGroup>
        </sectionGroup>
    <crystalReportViewer>
    <add key="resourceURI" value="~/crystalreportviewers13"/>
    </crystalReportViewer>
    please suggest me some solutions to resolve this issues...
    Regards,
    Manikandan.V

    Have a look at this blog for how to configure the viewer:
    Visual Studio 2012 Crystal Report not working on Windows Server 2012/ 0x800a1391 &amp;#8211; JavaScript runtime error: &…
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Running ABAP Web Dynpro Application without host entry of web server

    Hi All,
    I am trying to run a web dynpro application, its working fine when I have done host entry (host nam.domain.extension) of web server.
    But when I remove this entry from host file it not runs.
    Can you tell me the posibility of running this application without host entry? Based on this possibility I have to proceed my work. Please guide me.
    Thanks and Regards
    Sudhir Gupta

    Hi Sudhir ,
    See the below link , its necessary to provide FQDN.
    http://help.sap.com/saphelp_nw70/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
    Regards
    Yash

  • Plumtree portal server (v5.0.1) hosted on iPlanet Web Server (v6.0)

    Has anyone tried to port the Plumtree Corporate Portal v5.0.1 portal server component to iPlanet Enterprise Web Server 6.0 (aka SunONE Web Server, v6.0 )? Plumtree doesn't support this, but I am trying to merge a custom SSO authenticator to the Plumtree portal (v5.0.1). The authenticator runs as a plug-in to SunONE Web Server and has been in place on our customer's web site for a long time now.
    I have this working great in with SSL turned off, but I am having a difficult time getting past an error when I turn on SSL. I can get the portal server to run fine with SSL turned on through Tomcat on the same machine, using the same certificate and JRE. I can also get the SunONE server to run other servlet applications fine with SSL turned on. However, there appears to be either: (1) an incompatibility between SunONE's NSServlet plug-in that handles servlets and the Plumtree framework classes that set up replies via SSL, or (2) a configuration error in my setup somewhere. I'm hoping that (2) is the real culprit, but I've tried just about everything I can think of, and haven't been able to resolve this problem.
    The server starts up fine and I can load non-portal content without a problem. But when I log in, the portal's main community page that should be returned is not being returned to the client. PTSpy (a debugging aid for the Plumtree portal) doesn't indicate any problems, so I know the content is being built by the portal correctly, but the built page is never being sent back to the requesting client.
    Here is the error that gets logged to my SunONE server's error log:
    [29/Dec/2003:15:05:53] failure ( 2772): Internal error: Unexpected error condition thrown (unknown exception,no description), stack: java.lang.NoClassDefFoundError: javax/net/ssl/SSLSocket
    at sun.net.www.http.HttpClient.parseHTTPHeader(HttpClient.java:793)
    at sun.net.www.http.HttpClient.parseHTTP(HttpClient.java:702)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:583)
    at java.net.URL.openStream(URL.java:960)
    at org.apache.xerces.readers.DefaultReaderFactory.createReader(DefaultReaderFactory.java:149)
    at org.apache.xerces.readers.DefaultEntityHandler.startReadingFromDocument(DefaultEntityHandler.java:493)
    at org.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.java:314)
    at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:1097)
    at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:195)
    at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
    at com.plumtree.openfoundation.xml.dom.XPBuilder.LoadDocumentFromURI(XPBuilder.java:203)
    at com.plumtree.xpshared.jsutil.JSRegistry.LookupJSComponentVersions(JSRegistry.java:243)
    at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponentVersions(JSRegistry.java:184)
    at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponent(JSRegistry.java:465)
    at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponent(JSRegistry.java:444)
    at com.plumtree.uiinfrastructure.statichelpers.ConfigHelper.GetCommonJSIncludes(ConfigHelper.java:1330)
    at com.plumtree.uiinfrastructure.form.AFormAS.DisplayCommonJavaScript(AFormAS.java:59)
    at com.plumtree.portalpages.common.uiparts.PlumtreeAS.DisplayCommonJavaScript(PlumtreeAS.java:88)
    at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayHead(PlumtreeDP.java:599)
    at com.plumtree.portalpages.common.uiparts.PlumtreeDP.Display(PlumtreeDP.java:112)
    at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.ProcessDisplayPageOrRedirect(Interpreter.java:816)
    at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.HandleRequest(Interpreter.java:1589)
    at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.DoService(Interpreter.java:448)
    at com.plumtree.uiinfrastructure.web.XPPage.service(XPPage.java:141)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:919)
    at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1061)
    at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)It looks like a Java classpath issue, but I've verified (even in the same log file with java debugging turned on) that the SSLSocket class is getting loaded. I've even tried moving the specification of the jar file containing this class (jsse.jar, part of the JRE) to the beginning and end of my classpath setting.
    I'm using the same JRE that is bundled with the Tomcat release supplied with my Plumtree 5.0.1 installation (1.4.1_02). I can't get the JRE that came bundled with the SunONE v6.0 release to work at all.
    I've posted a similar message on a couple other forums (Java and iPlanet-related, as well as on Plumtree's customer forum) and haven't found an answer yet. Does anyone have any ideas?

    In case anyone else experiences this, I have apparently stumbled upon an issue with iPlanet's handling a specified JRE/JDK instead of the supplied JDK in iPlanet Web Server v6.0, SP5, though I found a way around it to resolve my problem.
    I had been specifying a different JRE to run with through the administrative server manager. However, even though I was specifying to load all the JRE's jar files in my classpath setting, iPlanet was only loading the rt.jar file for my specified JRE. With verbose logging turned on, the error log was indicating that the other classpath specified jar files were being loaded, but apparently they were not being used. The JDK that was released with iPlanet appears to be being used for all other JRE classes outside of those defined in rt.jar. Since the JDK supplied with the iPlanet release didn't contain jsse.jar, which contains SSL support, it was not being loaded and was causing the problem I was seeing.
    Instead of specifying the JRE of a different JDK that I was using, I changed the global setting in the administrative server manager to override the entire JDK. This has resolved my problem.
    So if you specify a JRE to override the iPlanet supplied JDK/JRE, it appears that only the rt.jar file of the specified JRE will be loaded, and the jar files associated with the iPlanet-supplied JRE will be used for all other classes. Specification of a complete JDK to override the supplied one will resolve this.

  • UCCX Reading XML file hosted on IIS web server

    hi guys,
    i have a customer on CCX 8.5 environment and they have a .NET application running on an IIS web server. As part of this .NET application, the app produce an XML file.
    My questions is
    "Can CCX read XML file that is hosted externally on IIS web server rather than parsing the XML file on CCX document repository?"
    All of the examples of XML parsing points to the XML file in document repository.
    Any pointers to links and documentation/example on how to do this would be greatly appreciated.
    If this is not achievable, if you could kindly suggest a different way of doing it too would be greatly appreciated.
    Thanks in advance,
    Daniel

    Hi,
    to be quite honest with you, I don't know anything about Sharepoint - so I am afraid I cannot help you with its XML editing capabilities. XML is just a well formed text file that follows some logical rules, so no additional application is required for editing, in fact, I always encourage everybody to use Notepad/Textpad/ to read and edit XML files. Of course, if it's not possible, you will find a great number of various user friendly XML editing applications.
    A UCCX script will normally access an XML using the Create URL Document step and then, using the Get XML Document data step with the help of an XPath expression, will filter out the necessary information from the XML document.
    The protocols used are standard and well known, including HTTP and XPath (and XML itself). So it does not really matter what kind of HTTP server serves the XML file, IIS is just an option.
    Examples may be found in the Scripting guides for your particular UCCX version.
    HTH
    G.

  • Crystal report viewer 13 are displaying blank page after deploying in web server

    Dear friends, i have designed crystal report (in VS2012 &  CRRuntime_32bit_13_0_8 installed in web server) it's working fine in machine VS2012, but when deploying in web server (Windows Server 2008 R2 64bit) it's getting blank page.
    I have read the http://adilmca.wordpress.com/2013/04/08/visual-studio-2012-crystal-report-not-working-on-windows-server-2012-0x800a1391-javascript-runtime-error-bobj-is-undefined/. But this is not working for me.
    I have copy the entire Crystal Report Support folder : C:\inetpub\wwwroot\aspnet_client\system_web\4_0_30319\crystalreportviewers13
    Please suggest me some solutions to resolve this issues...
    Regards, Stefano S.

    There is something "deeper" happening here (unless you're using dome old version of IIS (v. 6, etc.))... I think logging the app will help. I'd use Process Monitor first - see if you get any "Access Denied" messages. An http sniffing utility like Fiddler may also provide useful info.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Can't print anything other than a test page from the embedded web server

    Hi all
    I have two computers hooked up wirelessly to my HP C410b All in one printer.  One computer works fine and prints everything.  The other one did until this weekend.
    The one printer that will not print will print a test page if I go to the embedded web server and print a test page but if I try to print anything else - even a test page not through the embedded web server - it fails to print.  It does not give an error message it just states print failed.
    The computer shows alerts for the printer like when it runs out of paper or ink so it seems like it's connected but it just won't print.
    I've tried unistalling all the software and printer and reinstalling but it still has the same problem.
    Anyone any ideas???
    Thanks

    What operating system?
    If some version of Windows, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju... 
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Sun One Web Server instance not starting

    I have installed Sun One Web server 6.1. The administrator server is starting up. However, the instance of the web server through which I want to serve the web pages is not starting. Altough, there are no error messages that are shown when I am starting the server. Please help.

    I would check the logs directory for a PID file. It could be that there is a bogus pid file and when it tries to start you will get no error message. If there is a PID file delete it and try again.

  • Web Server Aliases not working!!

    I have set up a virtual domain "internal.blahblah.com" within that I have setup Web Server Aliases. However, I cannot get them to resolve for the life of me! I tried somthing as simple as * . No go when I enter "server.internal.blahblah.com". Anyone else having these problems? Any solution?

    It's not clear from your post what you're trying to do, or what you've done so far.
    Let me see if I can decode...
    I have set up a virtual domain "internal.blahblah.com"
    OK, so this is a 'Site' in Server Admin -> Web, right?
    However, I cannot get them to resolve for the life of me
    Define 'resolve', please. Do you mean 'resolve' as in DNS name resolution, or 'resolve' as in access the web site, even when DNS is properly configured?
    I tried somthing as simple as *
    Umm.. where have you entered *?
    In DNS? In your web server?
    If in the web server config, are you using 'Alias' (a URL remap) or 'ServerAlias' (a secondary name for the server)?
    No go when I enter "server.internal.blahblah.com".
    'server.internal.blahblah.com' is in no way related to 'internal.blahblah.com'. In order for this to work you need to have a DNS entry for 'server.internal.blahblah.com' that points to your server - hence the question regarding DNS above.

Maybe you are looking for