IWeb photos color do not match with the same posted on the internet

Hello,
my question is about the quality of the images posted by iWeb on the internet.
Yesterday, I sucessfully published a simple page with two images, and the color of them was faded compared to the images showing on the iWeb application.
I used the 'Adjust' panel to increase the color, and after published again, but althought the images were more expressive, they still did not match the equivalent in iWeb application, continued not so vivid.
What might that be?
More or less a month ago, I also published images and the colors matched perfectly with the material seen in the iWeb application.

I have placed two comparison examples in my file sharing folder.
Maybe it might help explain what I am experiencing. The differences may be subtle but they exist.
For my file sharing the address is
http://homepage.mac.com/hito_/Menu4.html
Maybe this might help.
These images were transported from iPhoto

Similar Messages

  • Need to reset Airport Extreme password, but the instructions provided by Apple and the support community do not match with what I get in my computer.

    I have followed the directions given on the Apple support pages and the ones provided in this community, but they do not match with what I get from the Airport Utility. According to the dorections, after starting a soft restart on the Airport Extreme, I should select the network from the menu bar item (which I suppose is the symbol for wi fi). Then it says to open the Airport Utility and select the Airport Base Station, ok up to now. But the instructions say that after selecting the base station to "click Continue". In my Airport Utility, which is the latest version, there is no Contimue. When I select the Base Station I get a bubble with information on the base and an "Edit" button. By clicking on this button, I am able to get a new window with info on the Base, inlcuding password, but I never get the window which says that the device has been reset. I need help, as I have bought a second Apple computer and need the password to set the wifi preferences, and I forgot the password for the Airport Extreme.

    You're doing everything right. The problem is that the Apple Knowledge Base article is outdated and the screenshots do not correspond to the new version of AirPort Utility.
    If all you need to do is find the password for the Extreme, you can do that by following this procedure. Use the Mac that is already configured to connect to your Extreme's network.
    You can retrieve your existing wireless network password from a Mac you normally use on that network. Your wireless network password is stored in your Mac's Keychain.
    You must first have an Administrator account on a Mac that you use with that AirPort Base Station, one that is used to connect to your AirPort network.
    On that Mac, open the Utilities folder. Find Keychain Access and launch it.
    In the search field at the upper right, type Airport. All the Keychain entries for your base station will appear there, as well as other entries.
    Look at the column "Kind". The entry you want to select will be labeled "AirPort network password" (not "AirPort base station password" or anything else).
    If you are trying to recover the AirPort Base Station password then the entry you want to select will be labeled "AirPort base station password" not "AirPort network password".
    Double-click that, and in the window that appears check the box for "Show password".
    You will get the following window:
    In the Password field type your Mac's Administrator password - the same one you used to log in to that Mac.
    Then, click Allow, and your wireless network password will appear in the "Show password" field:
    Make note of it.
    Close the window, then quit Keychain Access.

  • Flash Chart Error "A Start-tag was not matched with an end-tag."

    All of the Flash charts on a page started displaying the error "A Start-tag was not matched with an end-tag." The charts were all working prefectly and no changes were made to the page. Any thoughts?
    Thanks.

    Here is what I get when I click Show XML in debug mode. Thanks.
    <?xml version="1.0" ?>
    - <root>
    - <styles>
    <style type="background" id="background" background_type="solid" color="0xffffff" alpha="0" />
    <style type="deal_background" id="dealBackground" enabled="yes" color="0xdddddd" alpha="100" />
    <style type="deal_border" id="dealBorder" enabled="yes" thickness="1" color="0x666666" alpha="100" />
    <style type="deal_position" id="dealPosition" left="146" top="169.1707317" />
    <style type="deal_size" id="dealSize" startAngle="0" endAngle="180" innerRadius="0" outerRadius="109.5" />
    <style type="indicator_background" id="indicatorBackground" enabled="yes" color="0x000000" alpha="100" />
    <style type="indicator_border" id="indicatorBorder" enabled="yes" color="0xFFFFFF" thickness="1" alpha="0" />
    <style type="scale_size" id="scaleSize" length="7.3" />
    <style type="scale_position" id="scalePosition" radius="102.2" />
    <style type="scale_lines" id="scaleLines" enabled="yes" thickness="1" color="0x000000" alpha="100" />
    <style type="scale_labels_position" id="scaleLabelsPosition" radius="109.5" />
    <style type="scale_labels_background" id="scaleLabelsBackground" enabled="no" />
    <style type="scale_labels_border" id="scaleLabelsBorder" enabled="no" color="0x000000" />
    <style type="scale_labels_text" id="scaleLabelsText" font="Verdana" size="10" color="0x000000" bold="no" italic="no" underline="no" align="right" />
    <style type="scale_labels_size" id="scaleLabelsSize" />
    <style id="areaBackground0" type="area_background" enabled="yes" color="0x669999" alpha="100" />
    <style id="areaBackground1" type="area_background" enabled="yes" color="0xCCCCCC" alpha="100" />
    <style id="areaBorder" type="area_border" enabled="yes" thickness="1" color="0xFFFFFF" alpha="100" />
    <style id="areaBorder0" type="area_border" enabled="yes" thickness="1" color="0x666666" alpha="100" />
    <style id="areaSize" type="area_size" outerRadius="105.85" innerRadius="36.5" />
    <style type="circle_object_border" id="dotBorder" enabled="no" />
    <style type="circle_object_position" id="dotPosition" left="146" top="169.1707317" />
    <style type="circle_object_size" id="dotSize" radius="7.3" />
    <style type="circle_object_background" id="dotBackground" enabled="yes" color="0x000000" alpha="100" />
    <style id="emptyBorder" enabled="no" />
    </styles>
    - <shapes>
    - <shape id="indicatorShape" type="polygon">
    <point x="0" y="-4" />
    <point x="-97.82" y="0" />
    <point x="0" y="4" />
    <point x="0" y="-4" />
    </shape>
    </shapes>
    - <objects>
    <circle sizeStyleId="dotSize" positionStyleId="dotPosition" backgroundStyleId="dotBackground" borderStyleId="dotBorder" />
    </objects>
    - <data>
    <deal minimum="0" maximum="100" sizeStyleId="dealSize" positionStyleId="dealPosition" backgroundStyleId="dealBackground" borderStyleId="dealBorder" />
    - <areas>
    <area startValue="1" endValue="99" backgroundStyleId="areaBackground1" borderStyleId="areaBorder" sizeStyleId="areaSize" />
    </areas>
    - <scales>
    <scale startAngle="0" endAngle="180" angleStep="18" labelsPrefix="" labelsPostfix="%" decimalPlaces="0" sizeStyleId="scaleSize" positionStyleId="scalePosition" linesStyleId="scaleLines" labelPositionStyleId="scaleLabelsPosition" labelBackgroundStyleId="scaleLabelsBackground" labelBorderStyleId="scaleLabelsBorder" labelTextStyleId="scaleLabelsText" labelSizeStyleId="scaleLabelsSize" />
    </scales>
    <indicator value="51.7412935" backgroundStyleId="indicatorBackground" borderStyleId="indicatorBorder" shapeId="indicatorShape" />
    </data>
    </root>

  • Drill down value not matching with Displayed Report Painter Issue-GR55

    Hi,
    Need your help for an issue in drill down value of report painter from actual cost coloumn.
    I have created a new report group based on OSS Note-157720 in GR55 Traction. This new report group will provide data of Planed / Actual cost, Planned / Actual Quantity of the project in range of fiscal year/periods. The issue in this report is displayed data of actual cost is not matching with drill down data. The actual cost coloumn is formula coloumn which framed by subtracting All periods cost coloumn, Before Periods Cost Coloumn and After periods cost coloumn.
    Could you suggest on this issue.
    Thank you for your cooperation.
    Regards,
    Rakesh

    The report you are running first might have been created with some hidden columns that contain more than one variables relating to period and fiscal year. These may not be matching those that are required to run the drilldown. Look into the definition of the drilldown report. If you would want to match the first report, It may be better to identify which report runs on drilldown and the run that report with the required parameters.

  • Utilization values not matching with g/l accounts

    Hi Mentors
    while I am doing the utilization (J2IUN) FOR the month april my utilization balances not matching with g/l accounts. till the march my balances is tallying.
    why i am not tallying in april. please suggest me.
    thanks in advance
    Laxman

    During utilization, the GL balances are read and shown. Hence there should not be any discrepancy. However, please check the GL transactions for the month of April to find out if any non excise posting (a financial JV, for example) has been entered.
    Regards,
    Aroop

  • With color management, color picker current color does not match canvas color

    What gives here with color picker in CS3?
    RGB doc
    using color management/profiles
    View>>proof color using my Epson RGB printer profile
    create box
    double click fill box in palette box to view color picker
    pick color from spectrum area
    close color picker
    want to change color of box
    double click fill box to view color picker
    NOW current color does not match color on canvas, subtle but vexing color shift. So how can I use current color to pick a new color on the canvas is always different.
    here's an in illustration of the problem:
    http://docs.google.com/Presentation?id=dfv8h494_18gwqbsjg5

    Rob, here's screenshot of Acrobats Output Preview Object Inspector. You can download my PDF here - //www.fileswap.com/dl/Q1CzzOzEqt/
    I'm not sure if CM was assigned to document when created or  afterwards. In Color Settings preferences is stated Fogra 39 (if it matters - document was meanwhile saved and opened...). Are there other options to assign workspace to exsisting document?
    Peter, this is not the case. Placed image has embeded same color profile as is working space of document in ID. I tried the same with sRGB image placed in same ID document and compared it to PS but color shift (greenish) is present - it looks exactly the same.
    Guys, I can't tell you how happy I am to have you help me with this terrible and nerve-wracking problem.

  • Printing with Canon printer, colors do not match at all... Help

    Hello there, I have a Canon pixma 4300, every time I print somthing with a logo or a picture on it, the colors do not match.
    Is anyone else having this problem?
    Is there a new driver or a solution to this problem, this, seems to me, is really abnormal.

    This is a common problem, and it is very hard to get a complete colour match, between any printer and the screen, due to the differing nature of the way both create their colours.
    First off, you should check that your printer is properly calibrated with the correct ICC profile, and make sure your screen is also calibrated. Fur more info on this there is a PDF which explains it in more detail (Written for Tiger, but the principles are the same with Leopard.
    http://images.apple.com/pro/pdf/ColorMgmtinTiger.pdf
    sRGB would be a good starting point, as most printers can handle this profile. Also, you did not mention how different the colours were? If for example yellow is printing an off yellow/brown or yellow/green, then it is definately the colour profile, if it is printing yellow as red, well then that is something else entirely.
    Hope this helps, as chances are, the printer is not faulty, it just isnt set up right. Also, your images stand a better chance of printing correctly if they are created in the CMYK colourspace, not RGB. Especially true of logos.
    Message was edited by: Hazzardus

  • The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

    Hi ,
    We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and  as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
    We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
    "The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
    this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
    Please let us know reason behind this error message.
    Thanks,
    Mruduala

    You are kidding?  It took me about 3 minutes to scroll down on my tab to get to the triplex button!
    Habe you read the error message? 
    Quote:
    java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
    Check the trigger and it should work again.
    Timo

  • GL account balance not matching with the total stock value

    Hi,
    The GL account balance is not matching with the total stock value in report RM07MBSTfor stock in transit, Can anyone please let me know, where should, I look into to verify the reason for difference.
    Quick response will be appreciated.
    Thanks & Regards

    I am able to solve this issue. My client has a customized report, which helped me to look into the details of stock in tranisit account. Stock in transit account actually include PPV and TPV alongwith standard cost.

  • The creditors report is not matching with the G/L account

    Hi Gurus,
    The creditors report is not matching with the G/L account ,where i can go and find out the differences ?
    Please give me advice,
    I will assign points
    Thanks&Regards,
    Kumar

    Hi Kumar,
    There could be three reasons.
    1. You may have more than one recon accounts for different vendor groups. So, you need to select all the GL accounts when reconcile with Vendor balances.
    2. You may have some special GL transactions, which may post to different reconciliation accounts. Please check Special GL transactions (Down payments so on)
    3. Your vendor recon accounts may be changed after some postings. Please check. If changed, you need to select these GLs also for reconciliation with vendor balances.
    Hope this will help you. If not clear please reply, I will explain you.
    Pl. assign points if useful.
    Thanks

  • Balance in vendor recon account is not matching with the balance in subsida

    Dear All
    Balance in vendor recon account is not matching with the balance in subsidary ledger, the recons accounts inthe masters have been changed,how do i reconcile them

    Hi Surya,
    check f101 - tab parameter, flag Change recon acct.
    f101 carries out postings or gives you a simple list to determine all the open items with changed recon accounts.
    Best regards
       Horst
    Edited by: HorstRn on Jun 24, 2008 6:22 PM
    By the way.... this is the AM forum... Chance to get a solution is much higher in financials....

  • Accounting doc entries not matching with the the entries from j_1ipart2 entries

    Hi,
    After creating PO, I have done MIGO and J1IEX. Now, posted MIRO. The end screen shows a number stating accounting document created.
    I checked the accounting doc in fb03 and the document is displayed over there. I also checked the table for values captured in PART2 of excise. The value displayed in table is not matching with the value displayed in accounting document. Can anyone help?

    Hello Tejas,
    Here is the updated version of the situation.
    After the transaction J1IEX, I got a message saying an 'Accounting Document' has been created. But the accounting document number does not match with the original values. I checked all the tables and found out that the accounting document is not created.
    In this case, I thought of creating an accounting document manually and adding them directly to the table.
    Here are my questions,
    -Can I manually create an accounting document for multiple line items?
    -Few tax values should be split and should go to 2 different GL accounts. so how to do this if I am creating it manually
    -Or can I delete the values captured during 'J1IEX' in the table and reopen the GR so that the t-code j1iex can be processed again?

  • SAP format is not matching with the bank format

    Hello,
    I have created an invoice for a specific vendor and run the transaction F110 ,created a proposal and carried out a payment run.
    Later when I go to Environment --> Payment Medium --> DME Administration and choose one item and try to display it, the data
    medium contents are  being displayed correctly.But the displayed Data medium contents are not matching with the bank format
    for which the payment transaction has been made.
    Would request you to suggest the changes to be made either in DME or the corresponding ABAP code for making the Data
    medium contents  match with the bank format.
    Regards,
    Vineela.
    Edited by: Vineela S on Jul 27, 2011 8:24 PM

    Hi Kumar,
    There could be three reasons.
    1. You may have more than one recon accounts for different vendor groups. So, you need to select all the GL accounts when reconcile with Vendor balances.
    2. You may have some special GL transactions, which may post to different reconciliation accounts. Please check Special GL transactions (Down payments so on)
    3. Your vendor recon accounts may be changed after some postings. Please check. If changed, you need to select these GLs also for reconciliation with vendor balances.
    Hope this will help you. If not clear please reply, I will explain you.
    Pl. assign points if useful.
    Thanks

  • The number of details is not matching with the total count.

    Hi all, again stuck with the code.
    There is a form where i have to populate all the details of few tables in excel & there is a report where i have to make count of all these details.
    The problem here is the number of details that is populated in excel is not matching with the count in report, both have to match. There some problem in code, please help me in matching it.
    The below is the 5 tables with the columns below.
    Tables are ENQACEDTL, ENQACEHDR, ENQACMDTL, ENQACMHDR, ENQACSPEC:
    The Names mentioned below the table's name are Column Names:
    ENQACEDTL
    ENQACEHDR
    ENQACMDTL
    ENQACMHDR
    ENQACSPEC
    ENQNO
    ENQNO
    ENQNO
    ENQNO
    ENQNO
    ENQAMDNO
    ENQAMDNO
    ENQAMDNO
    ENQAMDNO
    ENQAMDNO
    ENGREF
    ENGREF
    QTY
    OFFREF
    MINSL
    ITEM
    EPREPBY
    ITEM
    BRANCH
    EINSL
    FRAME
    DEPT
    RATING
    DEPT
    MTEMP
    TECOLD
    ENGREFTDT
    ENCLIP
    MKTREF
    ETEMP
    THE BELOW IS THE SELECT STATEMENT CODE FOR POPULATING DATA IN EXCEL:
    SELECT ENQACEDTL.ENQNO, ENQACEDTL.ENQAMDNO, ......... (....ALL COLUMNS)
    FROM ENQACMHDR,ENQACMDTL,ENQACEHDR,ENQACEDTL,ENQACSPEC
      WHERE
      ENQACMHDR.ENQNO=ENQACMDTL.ENQNO  AND
      ENQACMHDR.ENQNO=ENQACSPEC.ENQNO  AND
      ENQACMHDR.ENQAMDNO=ENQACSPEC.ENQAMDNO AND
      ENQACEHDR.ENQNO=ENQACSPEC.ENQNO  AND
      ENQACEHDR.ENQAMDNO=ENQACSPEC.ENQAMDNO AND
      ENQACMHDR.ENQAMDNO=ENQACMDTL.ENQAMDNO AND
      ENQACMHDR.ENQNO=ENQACEHDR.ENQNO  AND
      ENQACMHDR.ENQAMDNO=ENQACEHDR.ENQAMDNO AND
      ENQACEHDR.ENGREF=ENQACEDTL.ENGREF AND
      ENQACMDTL.ITEM=ENQACEDTL.ITEM AND
      ENQACMHDR.DEPT=:PROC_DEPT AND
      ENQACEHDR.ENGREFDT BETWEEN :FROMDATE AND :TODATE
      ORDER BY ENQACMHDR.ENQNO,ENQACMHDR.ENQAMDNO;
    THE BELOW IS THE SELECT STATEMENT CODE FOR COUNT OF DETAILS IN REPORT:
    SELECT ALL  ACENQ.ENQACEHDR.DEPT, COUNT(ACENQ.ENQACEHDR.ENQNO) COUNT
    FROM ACENQ.ENQACEDTL, ACENQ.ENQACEHDR
    WHERE (ACENQ.ENQACEDTL.ENGREF=ACENQ.ENQACEHDR.ENGREF)
    AND ENQACEHDR.LOCKE=1 AND
    ENQACEHDR.ENGREFDT BETWEEN  :P_STDATE  AND :P_ENDDATE
    GROUP BY ENQACEHDR.DEPT;
    There is problem in join condition of 1st code that is in the "SELECT STATEMENT CODE FOR POPULATING DATA IN EXCEL":
    Please help me to sort out this problem..
    Thank You.
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    Oracle Forms & Reports Builder 6i.

    As Karthick points out, we cannot help if we cannot see your correct table structures (create table statements) and some example data and expected output (insert statements would be helpful).  You're telling us there's a problem, but we cannot see what the problem is as you've not shown it.  Just saying your query is not working is like me telling you my car is not working, but not telling you what the symptoms are.  You wouldn't know where to start in fixing it.
    Why are you using Oracle 9.2.0.1 ?  Not only has that version been unsupported for about a decade, but 9.2.0.7 was the first version of 9i that was considered 'stable' as versions prior to that were considered buggy.  So you're using an old, unsupported and buggy version of oracle.  Seriously, you need to consider upgrading to a supported version, preferably at least the latest 11g version.
    And what has oracle Forms and Reports got to do with the issue?
    And please explain how you are getting your data out of Excel and presenting it to Oracle to be able to query against it.  Excel does not have "tables", so your question is completely unclear how you are querying the data from Excel.

  • HT201317 why the last photos in photo stream are not sync with my iPad?

    why the last photos in photo stream are not sync with my iPad?

    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
    Photostream only syncs when the camera app is closed, ensure it is closed.
    Photostream only syncs when the battery is above 20%, try recharging the device
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

Maybe you are looking for