IWeb re-creates too many pages

I understand the difference between "Publish" and "Publish All", but what I don't understand is why iWeb re-creates so many pages when I "Publish". If I work on three pages and then simply "Publish", the darn thing spends five minutes re-creating those three and a half-dozen other pages I didn't touch. Not the end of the world, but kind of annoying.
Is there something I can do to eliminate this, or can someone at least help me understand why I am sitting and watching iWeb spin it's wheels for so long?
Thanks,
Bryan

The strange thing is that:
Even when the new page you are working on is in another site in iWeb the publish feature goes through some long process. While no files in the other sites are changed they are 'checked one by one,' making the publish process more tedious than it has to be.
Since the nav bar is a part of the html code all pages in the site you add a page to must be modified. If you don't wish this to happen uncheck the checkboxes in the Inspector:
1. Select the page and Open the Inspector
2. Click on the page icon.
3. uncheck 'include this page in the navigation menu.' and 'display navigation menu'
iWeb makes it very easy to create your own nav menu. Just type in some text and select it. Then open the Inspector and click on the hyperlink icon. (Arrow icon) and select 'enable as hyperlink' From the pull down menu choose one of your pages in your site.
Kurt

Similar Messages

Portal creates too many database sessions. fix doesn't work!!

Oracle Database 9i, Application Server 9iAS,
Operating System SUSE Linux 7.2
CPU - Athlon 1400
Ram - 1GB
There is a modification for the http server that aims to eliminate a problem on unix that causes the database to create too many sessions. The script can be found at
http://portalstudio.oracle.com/servlet/page?_pageid=1787&_dad=ops&_schema=OPSTUDIO
However the script fails to work. The http server is on port 80 with the redirect on port 7778. However going to http://myhost/pls/ results in a server error - connection refused. Is it possible that there may be an error in the script.
Thanks in anticipation

ok so my sound is ok now I can check that off of the list... I just looked around and found some external USB speakers that work just right. My built in computer speakers are just not the best quality.
As for the microphone, I still haven't been able to find out what is causing it to not work. I notice that it isn't actually broken since if I make a really loud noise right next to the input it will register a little but only a little bit.
$ arecord -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Intel
HDA Intel, ALC269 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
$
here is some additional information about my sound. Also, when I open alsamixer, I find that when I go to "select sound card"(F6) I see default and HDA Intel. If the default is pulseaudio, then is it possible that pulseaudio is causing the problem?

Sapscript: Output is continuous or contains too many pages (more than 3)

Hi,
I have developed Sapscript form for printing out material documents.
When users try to print out document with 68 positions, they receive error in MB90 -
" Output is continuous or contains too many pages (>3)".
Message no. TD405
If they try to print out small document, for example 3 positions, everything is ok.
What I have to check now?
Thanks,
Sveta.
Edited by: Julius Bussche on Sep 24, 2008 10:24 AM

Hi,
    Try to check the page counters for each page format.
    How many Page formats are there in your Form?
Check the First Page Attributes,
Page Counter
Mode                     START
Numbering Type     ARABIC
    Output length     00
which is next page to First page
Check Next Page Attributes
Page counter
Mode                     INC
Numbering Type     ARABIC
Output length         00
which is next page to Next page
Regards
Bala Krishna

Script error - Output is continuous or contain too many pages and get

Hi ,
I have added one more page (name affidvt ) to the existing script.
Previously
Cover page was calling next page as cover
first    page was calling next page as next
next   page as again next.
But after new addition of the page ( called as affidvt) it is now
Cover page was calling next page as cover
first    page was calling next page as next
next   page as affidvt.
When I test run this script it gives -
Output is continuous or contain too many pages and get
terminated.
Any solution ?

Check the page assignments again. Looks like at least 2 pages are calling each other.
-Cheers

Will Analyze create too many redo logs ??

DB : 10gR2
Hello Folks,
Is analyze process creates too many redo log files ?? Is their any other valid option other than no log ?

I guess that's also going to create too many log switches as it's part of DDLHUH?
REDO log switches result from DML.
If you are obsessed with LOG switches, then you need to use LOGMINER to observe the the relative per centage of changed data is from DBMS_STATS
when compared to normal DML activity.
I seriously doubt that DBMS_STATS has any significant impact to redo log switches.

Creat too many instance when writing an oracle database

Hi
I want to write Oracle database with database toolkits;
but..i found there are too many instance or called session（exceed the upper limit) created when the program running . that makes the Orace server stop responding
Is there anything i need to modify？
Attachments:
Oracle DB.vi ‏36 KB

Frankly I have never seen this problem, but then I make a point of never using the database connectivity toolkit. Assuming a Windows platform, Windows implements something called connection pooling so when you "close" a connection the OS inserts it into a pool so If you ask for another connection it doesn't actually open a new one it just gives you back a reference to one of the ones you "closed" before.
What OS are you running on?
What version of Oracle?
Is the instance of Oracle local or on another computer?
How are you communicating with Oracle (odbc, oledb, etc)?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

IPhones w ActiveSync creating too many connections on mail server

Over the past two days, I have started getting 503 errors, indicating too many connections. When I went to look at active connections, I noticed that the vast majority were from the iPhones that connect using ActiveSync. Just in the 45 minutes since I cleared all active connections, my iPhone has created 14 active connections. When you multiply that by the eight iPhones we have at this company the number jumps to 112. It is easy to see why the 503 error is getting generated by the end of the business day. It is as though the iPhone is unable to let go of an active connection, and just starts a new one. This only seems to be happening since the iPhone 3.0 update. Is anyone else experiencing similar issues?

Yes - I'm having a very similar problem on our server. But in this case the user has a very large mailbox - and imap processes are spawned but never die unless I go in and manually kill them.

HP 4620 Scanning too many pages; Extra blank pages ???

My 4620 Fax/Scan/Print/Copy will not scan correctly. I put one page to scan to my computer adn it scans 20 + pages. No matter how many pages I put in it always scans extra blank pages. I have reset the machine, I have realligned the machine and nothing works. Doe anyone know how I can fix this problem??
Thank you,
Mel

Hello Mel7777,
Welcome to the HP Forums.
I see that you are having an issue with the printer scanning multiple blank pages.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please be sure to power cycle the unit with the ON/OFF button after you have connected the power cable to the wall outlet. This will do a semi power reset on the unit.
So I can better assist you, please respond with which Operating System you are running.
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Print message - Output is continuous or contains too many pages ( 4)

I have created a new page in SAPScript called COVER_PG and now when I attempt to print an invoice I get that message. I am using Esker to send an email to a recipient and then the message comes up. I am not sure what it means or how to fix it. Any help would be appreciated.

May be your ESKER can handle upto 4 pages only... Try with some less pages like 3 or so.. and see what happens...
Regards,
Naimesh Patel

Photoshop CS6 creates too many History States withing 1 stroke

I'm on MAC OSX 10.6.8, Photoshop CS6, using a Wacom Cintiq 12".
Too often Photoshop remembers way too many History states within one pen stroke. In previous versions I don't remember this behaviour. Previously, each stroke, no matter how long, was registered as only one History state, until I raised the pen from the tablet. Now, totally sporadically without any obvious rule, Photoshop decides to remember even 100 history states within only one stroke.
Although this is sometimes useful, if you work on really long strokes, but mostly it's highly disturbing, as after using just one tool to paint only one little circle, I loose all my other, much more important History states.
Can somebody explain to me why???

Noel Carboni wrote:
Done with a mouse I get exactly one "Brush Tool" state in the history and one "Use brush" state recorded in an action.
Could it be that your tablet driver is actually delivering information to Photoshop that makes it think you're lifting the stylus and putting it down many times per stroke?
-Noel
Hmmm... could be, but I don't know how to test it, as it happens occasionally... I don't experience it in other software, but I will keep an eye on that.

Pc Companion - too many page faults

I have PcCompanion version 2.01.192 installed on Vista 32 bits Professional. I own an X10a.
PcCompanion is constantly running into page faults. After 1 hour after rebooting, it already has over 47 millions page faults. I have had this problem ever since I have my X10 on all versions of PcCompanion which I have been running. No other application is running in millions of page faults on my PC, not even my browser with many tabs open. PcCompanion is only using 21Meg of memory, it has no reason to hit so many page faults.
Is there any way to disable PcCompanion without de-installing it or get a fix for this fault.
I can't find any good explanation why a program like PcCompanion would hit so many page fault. This must be a bug.
Anything you want me to collect from my PC to help you identify the bug and re-issue a new software ?
Am I the only one with this problem ? You can check the Page Fault column in the process view of the Windows Task Manager.
Andre

You should sync your contacts and calendar with Google
open your phonebook
press MENU button -> tap on Send Contacts -> select all -> send it to your email
on your computer
-> download the file -> go to your gmail -> click on contacts -> click on more actions -> on the drop down menu click on "import" -> choose the file -> and click import
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Too many pages on my iphone

When I updated the software on my iphone 3GS it moved my compass app creating a new page with only that app. I've tried moving it to my apps page with space, but ended up creating another page with only one app. Is there away to condense the apps to 3 pages instead of 5?

Hold down the icon to make them all "jiggly". Then, hold down over the app you want to move and drag it to the left side of the page..all the way until the app icon is headed off the page. This will then pop to the page before that one and you can let go of the icon there. You can move them where ever you'd like, forward and backward. Do this with all the apps on the page and if there are no other pages after it, this page goes away leaving fewer pages.

IWeb, FTP and too many Macs

I have created a site using iWeb on my MacAir with the assets uploaded to an FTP server through e-noise. I now have a iMac and would like to make changes on the machine, but every time I open iWeb it only allows me to start a new site. I'd like to be able to make changes on my iMac (at home) and on the road (MacAir). Can anyone advise me on how I might go about this please.
Many thanks
Kieron

I use dropbox. I love it. It's free for up to 2GB of capacity. I'm editing my site from three different computers. It eliminates any confusion regarding which file was the last one edited, which machine it's on, etc. I keep my domain file in dropbox and keep an alias in the left sidebar of the finder window. So all I have to do to edit my site is double click the domain file alias in any finder window, no matter what computer I'm working on. The dropbox website also keeps backups of your files so in case you ever lose your work, you can retrieve a back up from DropBox.com.
One thing you need to be careful about is to not edit your file from two different computers at the same time, The file can become corrupted if you do this.
David

Safari has problems displaying WAY TOO MANY pages.

For some time now, I've noticed that Safari simply cannot display certain pages. The first time I noticed this was on my MBP17 with a Snow Leopard (10.6.8) installation, using Safari 5.1.9. After a barage of Security Updates started creating a flurry of problems on this computer (including the Safari problem, as best I recall), I finally gave in and migrated (I can't really say upgraded) to Mountain Lion. It was my hope that this would cure the recent problems. It did not! After migrating to Mountain Lion (10.8.5) and Safari 6.0.5, I still see the same thing that I get on my MBP15 that remains on OS 10.6.8 and Safari 5.1.9.
The problem I see is that Safari simply can't display certain pages. Many of them are on Apple's own website. For a while, I just thought Apple was creating pages with no content. It wasn't until I got to a page that had menus that wouldn't work (at all), that I decided to try the same page with Firefox. To my surprise, the page displayed perfectly on Firefox. I pasted the source code from pages displayed in both the Safari and Firefox into separate BBEdit documents and compared the source. It was absolutely identical! Presumably, therefore, the problem occurs with JavaScript modifications to the DOM. While it's easy to cut n' paste the DOM from Firefox, I've yet to find an easy way to do this with Safari's debugger. So, I can't tell exactly where the problem starts. Besides... Apple just doesn't pay me enough to debug their code for them!
The follow screenshots show the results of the attempt to display http://www.apple.com/support/itunes/ in both browsers. (I was on this page trying to figure out a solution to the error message "an unknown error occurred (-42408)" that I keep getting in iTunes... a whole different can of worms!)
As displayed in Safari (or as NOT displayed in Safari)...
As displayed in Firefox...
This problem crops up on many sites and is rather unpredictable. The thing that amazes me most is how often it occurs on Apple's own site! And since I see it on two different computers, with different OS and Safari installations, I can't possibly be the only one who sees this. I did just try it on my iPad 1 and the same page displays fine. Do I just need to go back to an even older OS version on my MBPs? Maybe OS 8?
Anybody have an idea what might be going on? I have spent the entire past week debugging iOS7, iTunes, Safari and Mtn Lion. After over 34 years on Apple products, I'm just about ready to go buy a PC!! Maybe even a CPM box.
PLEASE HELP!
PS: Just to make it WORSE... I have tried to enter this several times and keep getting an error. I finally had to switch to Firefox and try again. What the HEXX has happened to Apple???

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

Exporting clickdummy as "html + images" creates too many gifs

Hi, I created a prototype in Fireworks, exported as "HTML and Images". There are multiple pages and a few slices. My problem now is the images folder. It's huge. There are thousands of gifs. Is this normal? I wanted to provide this prototype via an online link, but you mostly see the images loading from top to bottom when opening any page. It's annoying. Working offline from desktop is fine of course.
Do I have to reduce the number of sclices so that there are fewer gifs in the image folder? I would have to cick off some hover states... or is there any other way to reduce the number of images the page is build of?
Thanks for any help and advice!
Mari

OK, thanks, that already helped me. But unfortunately I didn't manage to create these html-text slices. There are just green solid boxes where I can enter html text but I dont know how to transfer my different text areas in combination with images to html + image slices. Do I have to slice up the whole page?
After trying and studying the article you mentioned above I exported as Css and Images and now my page consists of html text and some images, looks nice and is edidable in Dreamweaver. But with this method I loose all the hover functionality. In which direction should I work on?
A export as Css and Images and try to insert the hover and swap-image functionality manually in Dreamweaver or
B export as Html and Images and try to learn how to add html text slices?
Thanks again!
Mari

IWeb re-creates too many pages

Similar Messages

Maybe you are looking for