IWeb repeating photo issue..

i recently updated to iLife '08..
i created my iwebsite in '07.. i have a photo page with multiple sections of differnt series of photos.. i published with password.. and it was fine.. i updated iLife.. added some new photos series.. published again..
then when i go to view.. it takes one photo series section.. and repeats that same one through out the whole page..
anybody got any ideas or suggestions.. would be greatly appreciated!..

You probably duplicated photo grid from photos page. Although photo grid duplication is allowed but only one photo grid is built per photos page.

Similar Messages

I insert a photo and save, but the next time I open iWeb, the photos are gone.

I insert a photo and save, but the next time I open iWeb, the photos are gone. Does iWeb not save?

Bummer! Try this: repeat the fixes and once the domain file seems to be working make a duplicate of it. Then download BatChmod and run it on the duplicate domain file with the settings shown below:
Click to view full size
Open the duplicate domain file and run with it. See if it reverts back to the bad behavior. Can't think of anything else.

IPod Classic: Photos Issue: Photos on iPod Show Black Screen - Replicated!

Issue / My Solution related to format = PC / Windows
*FINALLY! I've replicated the issue where some random pictures in iPod photos show as a thumbnail, DON'T show when clicked with center button (instead a nice friendly black screen is shown) but DO show when you click the center button again to start Slide Show.*
Firstly, I'll start by saying that this was one of 4-5 issues that caused me to go to my local Apple store today & get my SECOND replacement (3rd iPod Classic; Black; 160 GB). It made me laugh when the technicians told me the truth; since Apple never preps even their own people for new products to possibly get trained on so that maybe they're more technically knowledgeable then their consumers when they go on sale, this store's approach has typically been 'Problem with a 6th Generation? Here's a new one'.
It's been a quick & easy way to satisfy customers while getting them no where, but they go home thinking their new unit will work, when in reality it was never a hardware issue.
Anyways, I exchanged 2 x 160 GB & 1 x 80 GB tonight for many of the same reasons, truthfully because I felt I'm due new units after the amount of times I've reimaged (restored) each by restoring all versions of the firmware software.
Many of you have experienced the photo issue I mentioned above before going off on my tangent, many of you may not have (yet).
Well, I'm 1,000% that I replicated this one:
*When restoring one of the iPods replaced, I conveniently noticed that the pictures which showed up blank on my iPod had illegal characters in their Windows Filenames.*
*These characters can include, but are not limited to:*
*apostrophe ('); comma (,); period (.)*
*Again, the characters above are the only ones I've identified so far; granted that it should not ultimately be like this; the iPod should accept filenames containing these characters & if it can't or it's too hard for it to accept them, iTunes should display a warning to the end user to change the filenames with illegal characters.*
In conclusion, I'm about to unwrap my new 160 GB & sync it. I will avoid & hold off with the 1.0.2 update for as long as possible in hopes that a 1.0.3 comes out soon; especially since the only noticeable difference it made for me was a faster & more responsive & sturdy Cover Flow (don't even use anyways) + shuts off in my JBL Dock at work (replicated as a bug in 1.0.2; workaround: use PLAY, PAUSE & other controls on the unit itself, not with the dock or remote control on the dock.)
I learned my lesson the hard way & will definitely wait a few days until 1.0.3 is released to see how it really is by feedback posted here in this forum. For all you newbies, this is the best advice I can offer; don't bank on 1 or 2 posts, read a bunch. When you start seeing a pattern of problems, you know something can't be right. It's funny how you look at the post history of these updates (1.0.1 & 1.0.2 & you see all those who jumped to install post only the nicest things & the great enhancements they see, until a day later they're hit with the negatives of that build.
_*+--> Truth is,_ I can't believe Apple has gotten away without releasing 1.0.3 by now.+*
*+If this keeps up, I hate to say it, but their ratings will definitely go down the tubes (not being negative, just a realist).+*
Any thoughts?

JazzyMac007 wrote:
I don't think it's illegal file names. I've noticed that the file takes a while to "load" even when after you see the thumbnail in the main screen. A few back and forths and hearing the hard drive spinning finally confirmed that it would take a while for the pic to show up...extremely annoying, but a hard drive type issue methinks. Photos that show up once, don't show up again or take forever to do so and vice versa.
Not sure how this affects firmware as I'm not techy (I'm jazzy :)).
I'm going to let all my photos "fully load", and then try it again.
I tried your method on 3 sixth generations with this issue (2 x 80gb & 1 x 160gb). I let them sit for 12 minutes; no picture.
Changed filename to remove a comma found in the names; then I sync it again & ALL BETTER.

Repeating key issue

I just moved to the Mac a couple of months ago. I love it and haven't looked back. However, today, I used my Mac twice. First, this morning, I didn't do anything unusual. I cleared out my trash, browsed a bit on the Internet and answered e-mail. Then I modeled some artwork. I shutdown my machine, shutdown my cable modem & router and went to work. When I came back at lunch nothing was wrong and I hardly did anything (Internet still wasn't on).
However when I came home after work, I started the machine up and the hard drive icon kept popping up and it was difficult to use the menu because I had to hold down the mouse button instead of just click. It turns out that the space key is repeating spontaniously. I thought it might be the keyboard but it doesn't stop when I unplug the keyboard.
Has anyone had this before? How do I cure it? Thanks.

Hi Redspark,
Did you arrive at any solution to your repeating key issue? I've recently joined the discussions forum because I'm having a similar problem - without having typed anything, my backslash spontaneously inserts itself into any text box available and starts repeating itself across the page. In the Finder, I also get various folders spontaneously highlighting themselves, if I pull down a finder menu, it flashes which makes it almost impossible to select anything. As well I get sudden outbursts of the error chime.
Have done an Archive and Install, reset the PMU. I've also zapped the PRAM, checked my RAM slots, checked Permissions, etc.
Let me know if you've got any further insights.
Thanks.

Enhancement Please! iWeb and Photo resizing

Hey all
I take loads of photos @ 7Megapixels which results in large file sizes. Fantastic when I want to blow them up. But to drop publish them onto iWeb it copys the graphic/photo rather than asking if you wish to resize or lower the quailty. As we know the same image will look great with a much higher compression rate when viewed.
any views on this as I think it would be a great enhacement!
Cheers
Carl

In which templates and in what situations are you seeing this happen? I certainly don't experience the same thing. For example, I have four photo pages on a site on which I've been playing around with iWeb [link to the photo 'menu' page here: <http://web.mac.com/curlytool/iWeb/iWebTryout/Photos.html>].
Comparing file sizes between originals and published versions for one of these pages I see that the largest of my originals is 1.4 MB @ 1,464 x 1,054 pixels. This has been converted to PNG and reduced to 180 KB @ 700 x 120 for use in the page header, and (still as a JPG this time) to 156 KB @ 800 x 576 for display when its thumbnail is clicked and in the slideshow. This applies both when I publish to .Mac and to a local folder.
Resizing of this nature is standard in my experience with iWeb. With photo albums in particular, images are changed to a maximum height of 800 pixels to suit the requirements of the new slideshow. I have to say, however, that my experience is limited to the Modern template. Perhaps the situation is different with others.

Photo issues on iweb

When I add photos that i have edited on iphoto onto my iweb page, instead of getting the edited version of the photo, iweb shows the original. any idea why this is happening?

You need to make iWeb run in English to get the buttons right. Set up another account with the language set to English and work on that site there. Or do File > Get Info > Language on the iWeb app icon and uncheck everything except English.

IWeb & the infamous podcast photo issue

Would anyone know how to specify which photo serves as the iTunes podcast photo *+if you use iWeb+*? I have searched extensively and cannot find any way to set it, let alone change it. I'm guessing that iWeb just randomly selected a photo from my site as the album photo. I am now aware of the general problems with podcast photos, but want to give it a shot anyway.
Thanks to any and all who can share their advice. You rock. Yes, you.

I set my podcast photo in iTunes.

IWeb and photo corrections and importing photos

Yeah, another iWeb problem. I both love and hate the application. I hadn't had this problem before now. I imported many, many photos into albums (via Aperture...) before noticing that the photos in download mode on my website were showing up at half the pixel size that the originals were. The photo download option is checked as 'original' so that's not it. I did a little checking and couldn't figure out why iWeb is importing these photos from Aperture at half size... So, I did an end run around it and dragged and dropped directly from the folder to iWeb. Great, right? Nope... started noticing that the photos that I am dragging in are not holding their corrections (mainly brightness/contrast) that I had applied in Photoshop. They show up fine in the folder, they look fine as I am dragging them, but when I release in the iWeb folder/page they lose their corrections? HUH?!?
No matter what I do (dragging them from the folder or from the desktop is the same...) they lose the corrections in iWeb... They still hold their corrections if I drag them from the Aperture sidebar in iWeb, but then they are half sized...
And no, the optimize images on import button is NOT checked, thought for sure that that would be the problem. Any thoughts, ideas on either problem, the size issues or the corrections... What determines the size that iWeb chooses for display? I notice that there are three listings when I upload them in FileZilla...
And on a side note, the preview images in the main album page show low res images... What controls the resolution for them and could this be somehow related?
I also tried to export a photo from Aperture which shows the correct resolution of 1280 X 1280 to the Desktop and got a correct 1280 X 1280 image. Dragged it into iWeb and it kept the corrections as well, but when published, the website displays a half size image with a 640 X 640 download size... Sigh...

Did you reboot? That often clears out caches and corrects errant behavior in apps. That and deleting the preference file. Either that or offering the right sacrifice to the computer gods.
OT

IWeb 09 photo album loses hyperlinks to external pages

I have an album of images on my site and have hyperlinked the image caption text to open videos on external pages. This always worked fine in iWeb 08, in fact the images themselves on the main album page automatically became hyperlinked, which was cool. Upgraded to 09 and published (fortunately on a temporary site and not my live site), and now whether you click on the image or the text nothing happens. If you click on an enlarged image it just forwards to the next image.
Am using Transmit to upload, uploading to my site hosted on machighway, not mobileme.
Links work fine and open when I'm in iWeb. Tried dragging the index file to the browser and the links don't work, so obviously the problem is with iWeb 09. So my request to Apple--give us a "revert/undo" command that will take our imported docs and application back to the earlier version of software while you debug AFTER product launch. I really really hope this is fixed soon with a new version because my clients expect me to upgrade my site monthly and I'm dead in the water now until Apple fixes this.

I'm right there with you, and echo bjaquez's post. I've been frustrated by the situation. Been working (2) trials/options; create an album and try to hyperlink, and create a page and try to hyperlink. First, let me give some history.
I have about 140 photos of books to put on my site's Publications Page; plan is to hyperlink each book photo to the site where it can be purchased (external link). I reviewed the import options the Help menu provides for bringing all the photos into iWeb; one option open the Media Icon at the bottom tool bar. I found the photos in my iPhoto section, selected & imported. The issue here is it imports all photos, stacked on top of each other. When I attempt to spread them out and down the new page, iWeb will not let me scroll down the page any further, even when I've expanded the rows, columns, spacing, etc.
Option 2 was to prep the photos in iPhoto, then export to iWeb as a new page. That worked great, all photos carried over, etc.
Now, regardless of how I do it, when I open the Inspector, the Hyperlink "enable" is grayed out. It will not allow me to hyperlink the photos.
I'm definitely not a Mac guru, but pretty stoked how much I've learned this past year. I think the inability to hyperlink on an Album page makes sense in some weird way (maybe it's not weird and I've got it right, anyone can let me know) because I noticed once you click on a photo, it blows up in size so you can do a slide show or see the next photo. So, I'm thinking this would override a Hyperlink ability, or if it did Hyperlink, it would override the ability to blow up the size of the photo.
So, my next thought is to tackle this from creating a new page and dragging the photos over one by one and hyperlink.
Any feedback is helpful. Is it twisted to be frustrated, but intrigued at the same time as I feel like a sleuth trying to solve the crime

IWeb missing photo albums

Hi all,
My .mac subscription expired yesterday. I chose to purchase hosting services with Mecca and used Fetch to upload the iWeb data to www.walterafable.com. Everything seems okay, EXCEPT when you go to the Photo Album page, only 1 of the 6 albums shows up. Anyone else experiencing this or anything similar? Where should I look to troubleshoot? The uploaded data mirrors my local folder--I don't get it.
thanks in advance,
Walter

I think I found the issue, and you, Cyclosaurus put me on the right track:
The following link does not work:
http://www.walterafable.com/site/PhotoAlbums/Pages/Fall_Festival_files/Media/IMG0508/mip.jpg
And this link DOES work:
http://www.walterafable.com/site/PhotoAlbums/Pages/Fall_Festival_files/Media/img0508/mip.jpg
SOMEHOW, when Fetch uploaded the Media folders, the case of the leading letters of the folder names changed from lower case to upper case and vice versa. The reason why the last album seems to work, as far as I can tell, is that those folder names only contain numbers.
Someone much smarter than me knows exactly why this happens but my hunch is that it is some cross-platform glitch that obviously .mac avoids.
So I'm either going to rename all of my photos to file names with numbers only or try a different method of uploading the files, CaptainFTP or simply using the Finder >Go>Connect to Server... option.
I will post the results.
Walter

IWeb Online Photo Albums

What am I supposed to do with all my meticulously created online photo albums now that iWeb is going away? Any suggestions?

You can find a 3rd party hosting service and move your iWeb sites from your iDisk to it and continue as before. Of course there will be somethings that iWeb will lose upon moving to a new server and the MMe servers are taken off line June 30, 2012:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
All of these issues can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
Apple has announced that iLife is now an unsupported product and those iApps will only be available thru the App Store from now on. However, the boxed iLife 11 at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought. Personally, if I already didn't have a copy I would purchase one to have it for reinstallation purposes if ever needed.
There are a number of web development applications out there that you can migrate to once iWeb no longer works or does'nt suit your needs. They vary in their ease of use and simplicity. Just search the iWeb community as Wyodor suggested to find discussions on the pros and cons of these apps. We have until June 30th to make our decisions and move the sites. Lots of time to experiment and settle on an alternative.
OT

IMessage photo issue

So recently I cannot receive photos through iMessage from other iPhone users. Those same iphone users can send between each other just fine. I can receive it if they send as text but iMessage fails repeatedly. Tried the basics like turning it off and on in my iPhone settings. I have not erased the phone yet and would hope there is a better solution than that. Space on the phone doesn't appear to be the issue as I have at least 2 GB free.
I wondered if this had anything to do with servers at Apple as it's only been since iOS 8 beta went live this week. I have two Macs which also receive the messages but I've turned those off to trouble shoot. Up until yesterday they were fine.

Hello JonathanSmith2006,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Messages issues:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Jabber for windows 9.7 photo issue

Hello,
I'm facing an issue with corporate photos on Jabber version 9.7. Before, with version 9.2 i had the same problem but after add an entry on the file jabber-config.xml the corporate photos were already shown.
What can be the cause for this behaviour with version 9.7?

Hi Amit,
Hope you're doing well. Guess the problem is solved. We installed this new version 9.7 of jabber on a machine with Windows XP OS. After reviewing the Cisco Jabber for Windows 9.7 Release Notes I noticed that the only available Operating Systems for jabber 9.7 are:
Operating System Support Cisco Jabber for Windows 9.7 supports the following operating systems:
•Windows 7 (32 bit and 64 bit)
•Windows 8 (32 bit and 64 bit). Note: Metro Interface and Windows 8 RT are not supported.
•Windows 8.1 (32 bit and 64 bit). Note: MediaNet (including deskphone video feature) does not currently support Windows 8.1
Thanks a lot!

Iweb slider html issues

Hi there!
I'm trying to utilize the "anything slider" via the html widget on my welcome page. I've got all of my files properly located, I think my issue is with the html working correctly in iweb. The original html code opens up a beautiful slider and when placed into an html snippet on my welcome page it's all wacked out and images are not displayed properly.
Here is my html that I'm working with:
Original file: http://dl.dropbox.com/u/29215513/slider_original.html
MY file: http://dl.dropbox.com/u/29215513/slider-edit_this_one.html
Any help would be appreciated as soon as possible, as I'm trying to update this for a job interview... I feel like I'm losing my mind or iweb just decided to hate my guts.
Thanks! J

You didn't follow the instructions. You skipped a step. You need to correct the links for iWeb.
You need to add you MobileMe info "http://YOURMobileMe.com/"
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
    <title>Jen Slides</title>
    <meta http-equiv="content-type" content="text/html; charset=utf-8" />
    <meta name="keywords" content="Jen Slides" />
    <meta name="description" content="Jen Slides" />
    
    <link rel="stylesheet" type="text/css" href="http://YOURMobileMe.com/engine1/style.css"/>
    <style type="text/css">a#vlb{display:none}</style>
    <script type="text/javascript" src="http://YOURMobileMe.com/engine1/jquery.js"></script>
    <script type="text/javascript" src="http://YOURMobileMe.com/engine1/wowslider.js"></script>
    
</head>
<body style="background-color:#d7d7d7">
    
    <div id="wowslider-container1">
    <div class="ws_images">
<span><img src="http://YOURMobileMe.com/data1/images/1.jpg" alt="1" title="1" id="wows0"/></span>
<span><img src="http://YOURMobileMe.com/data1/images/2.jpg" alt="2" title="2" id="wows1"/></span>
<span><img src="http://YOURMobileMe.com/data1/images/3.jpg" alt="3" title="3" id="wows2"/></span>
<span><img src="http://YOURMobileMe.com/data1/images/4.jpg" alt="4" title="4" id="wows3"/></span>
<span><img src="http://YOURMobileMe.com/data1/images/5.jpg" alt="5" title="5" id="wows4"/></span>
<span><img src="http://YOURMobileMe.com/data1/images/6.jpg" alt="6" title="6" id="wows5"/></span>
<span><img src="http://YOURMobileMe.com/data1/images/7.jpg" alt="7" title="7" id="wows6"/></span>
<span><img src="http://YOURMobileMe.com/data1/images/8.jpg" alt="8" title="8" id="wows7"/></span>
<span><img src="http://YOURMobileMe.com/data1/images/9.jpg" alt="9" title="9" id="wows8"/></span>
<span><img src="http://YOURMobileMe.com/data1/images/10.jpg" alt="10" title="10" id="wows9"/></span>
<span><img src="http://YOURMobileMe.com/data1/images/11.jpg" alt="11" title="11" id="wows10"/></span>
</div>
<div class="ws_bullets"><div>
<a href="#wows0" title="1">1</a>
<a href="#wows1" title="2">2</a>
<a href="#wows2" title="3">3</a>
<a href="#wows3" title="4">4</a>
<a href="#wows4" title="5">5</a>
<a href="#wows5" title="6">6</a>
<a href="#wows6" title="7">7</a>
<a href="#wows7" title="8">8</a>
<a href="#wows8" title="9">9</a>
<a href="#wows9" title="10">10</a>
<a href="#wows10" title="11">11</a>
</div></div>
<a style="display:none" href="http://wowslider.com">jQuery Slider Examples by WOWSlider.com v2.0.3m</a>
    <div class="ws_shadow"></div>
    </div>
    <script type="text/javascript" src="http://YOURMobileMe.com/engine1/script.js"></script>
    
</body>
</html>

Iweb 8 photo gallery doesn't work.

Hey
I created a homepage i iweb 8. I publish the homepage to a folder and upload to the ftp server of my webhost. homepage works fine, but the photo gallery does not show any pictures. Can anyone help me with this? When I go to the folder on my homepage and open index file, it shows perfect. so something goes wrong when I upload to ftp.
Thanks in advance... more details can be provided if needed.

your other photos page: Træskåle_%28klik_på_billedet_for_at_se_galleriet%29
contains special characters %28 = ( %29 = )
But most of all, characters that you use in Danish probably had lost in javascript translation, this is expected:
http://www.drudssnedkerfirma.dk/Sted_2/Galleri/Sider/Træskåle_(klik_på_billedet_for_at_se_galleriet)_files/Træskåle_(klik_på_billedet_for_at_se_galleriet).js
but note the erros show different:
TrÃ¦skÃ¥le_(klik_pÃ¥_billedet_for_at_se_galleriet)_files/TrÃ¦skÃ¥le_(klik_pÃ¥_billedet_for_at_se_galleriet).js
consider change the page name.

IWeb repeating photo issue..

Similar Messages

Maybe you are looking for