IWeb says I'm not logged into MobileMe when I am...?

I'm trying to publish my site from iWeb but the Site Publishing Setting's page keeps saying I'm not logged into Mobileme - and I am.  I've restarted, checked for updates, downloaded the updated iWeb.  Thanks for any insight! 

Try this:
go to the System/MobileMe preference pane and log out of MMe.
login with a bogus username and password like "test" and "test". This clears the caches.
login with your correct username and password, launch iWeb and try again.
OT

Similar Messages

  • IWeb says I'm not logged into iWeb and can't upload my website

    Has anyone else had this problem? I recently reinstalled iWeb, and it says I'm logged out of MobileMe. When I click to login, my computer says I'm logged in to MobileMe, but iWeb still says I'm not. Any suggestions?
    Message was edited by: charlesspinks

    *(i do not have mobile me under the apple menu-maybe cuz of 10.4.11 so I went to sys pref>.mac>account and removed my password and user name and replaced it with a bogus one)*
    Correct. MobileMe was still .Mac when 10.4 was released.
    _Go to the Finder and go to Go > Utilities > Keychain Access
    *(same here do not have keychain access under finder but found it under application>utilities>keychain access--- )*
    Correct. It won't be under Finder. Rather when you are in the Finder (says Finder next to the Apple) you will see a "Go" menu. This has Utilities as a choice within it.
    __Delete the MobileMe keychain (it has a little blue / white cloud next to it) and close the window
    *( there were no mobile me or .mac keychain whatsoever-- hence nothing to delete)*
    This is unusual. Sign in to the .Mac Pref Pane with your correct .Mac name / password. Then open Keychain access. You should have a entry here with the little blue .Mac globe. Delete it.
    Then return to the .Mac Pref Pane and sign out.
    Remove the following to the trash and restart the computer:
    Your User > Library > Caches > com.apple.iWeb
    In your case remove the entire "Caches" folder from this location. It will be re-generated upon restart.
    Your User > Library > Preferences > com.apple.iWeb (There may be more than one of these. Remove them all.)
    Now remove the plist.
    Once the computer is restarted Go to Apple Menu > MobileMe and sign back in to your account.
    Now do this.
    If the same issue happens in iWeb at this point try the following:
    _Go to your iWeb domain in Your User > Library > Application Support > iWeb.
    _Duplicate your Domain by clicking on it and going to File > Duplicate.
    _Right click / ctrl + click on the domain file (not the Domain Copy) and choose "Show Package Contents"
    _Remove the file inside called something like "com.apple.Your .Mac Username.plist"
    _Close the window and attempt to publish again.

  • Every time I try to load an app it says you are not logged into iTunes

    Every time I try to load a new app it says I am not logged into iTunes

    Do you share your pad with someone else - are you still signed in on their account?
    Then check in settings\restrictions that Apps is not restricted - if all ok go and Open iTunes , select music (can use others) scroll down to bottom of page and tap on your email at left. Tap sign out, then repeat and sign in again.  if signin successful, try again.   If it fails.
    Go to settings\general\reset and select Reset settings, try again.
    If it still fails - Connect to your PC by cable and see if you can download an app from the Store using your PC's iTunes - If you cannot - right click your device at left hand side and select reset warnings, then navigate to Library, Apps and check at bottom of page if any updates/downloads are pending - update\download as necessary.
    if you can download an App using the iTunes store on your PC - select sync whilst still signed in. Try again using your ipad's Store
    Does this resolve your problem?
    If still having problems, in Itunes select Store, then Home page, then using quick links at right select Account.  verify all details are correct and your pad and PC are listed in Authorised devices.
    Sign out of iTunes and close with your device still connected - Power off your device by holding down the power and home buttons together - when red slider appears slide it across to power off.  Re-open iTunes on your PC and under Menu\Store sign in.  power on your iPad and try again.
    If problems still persist - check with customer support that there are no problems with your listed payment method\card restrictions on your store account.
    Regards, Ct

  • I am trying to create another email account with talk talk. and I keep getting a failed message saying 'mail could not log into the mail server talk talk. Yet I already have another email account with talk talk. Not sure what I am doing wrong

    I am trying to create another email account with Talktalk. I already have one account.
    I try to input the new email address and password and get a failed message
    'Mail could not lot into the mail server talktalk.net.
    I have tried several times and keep getting the same message.
    Any ideas

    Accessing your emails from any computer connected to the Internet or from a Smart phone should be straightforward.
    For help on how to set up your e-mail on some of the most common software applications and devices, see How do I set up my TalkTalk email?
    If your software application or device isn't listed, all you need to connect to your TalkTalk e-mail mailbox are the TalkTalk e-mail settings. Make sure you use the right email settings for your specific email address.
    TalkTalk email addresses only
    Login / Username
    [email protected]
    [email protected]
    Incoming mail server
    mail.talktalk.net
    mail.talktalk.net
    Incoming Port
    110
    143
    Outgoing mail server
    smtp.talktalk.net
    smtp.talktalk.net
    Outgoing Port
    587
    587
    Outgoing SSL
    Yes
    Yes
    Outgoing Authentication
    Yes
    Yes

  • IWeb hanging at logging into MobileMe (Personal Domain Problem)

    I've searched and searched for an answer to my problem all over the internet and these forums and keep coming up blank.
    Apologies if the answer is somewhere and I've missed it.
    It could be a wider problem with my MobileMe, but iWeb is where it first occurred.
    I recently had my personal website forwarding to my MobileMe site, and was using the MobileMe webspace to host my site. I had set my personal domain (in MobileMe) to the personal website. Why I did this I'm not sure, as I wasn't actually using the external webspace, merely forwarding it to my MobileMe site.
    However I then decided I wanted to create a new site and this is where the problems began to occur. When I tried to publish the new site, it seemingly tried to publish to personaldomain/new_website name/ which obviously didn't exist as there was no external webspace there.
    I then decided to reset everything, get rid of the personal domain setting within MobileMe and just merely forward my external web addresses to my Me sites. Upon deleting my Personal Domain from the mobileme settings page and logging into iWeb, the website name next to my username was still my external website address, and iWeb seemed to think it was all still published (which it was, as when I went to my web.me.com/etc, my website was there) However I wanted to start from scratch and republish everything, so I deleted all the web/sites section from my idisk, and hoped I could republish everything (this could have been a mistake!)
    Now when I try to publish, iWeb just hangs at logging into MobileMe and won't publish anything. iPhoto also won't upload new photo albums and neither will aperture. They just hang at syncing galleries.
    I'm completely at a loss as to how to proceed. I've deleted preferences from iweb and also logged out of mobileme, put a fake name in and logged back in again (to clear the cache I think) and still iweb hangs. I've even tried creating a new user account and logging in there and still it hangs.
    Apologies for the essay of a post, if anyone can help it would be greatly appreciated. Just some suggestions as to where to go would be helpful. I'm wondering if it's something to do with Keychains? I had a brief look in there but it all went over my head. This is the first problem I've ever had with my new mac, and being from a PC background, don't really know where to look to fix things.
    Thanks in advance to people who even get through reading the entire post!

    If stephen's suggestion doesn't help you might consider the following:
    Source: http://www.macintouch.com/readerreports/mobileme/index.html#d30jul2008
    Page Title: MobileMe
    Date: Wednesday, July 30, 2008 9:06:25 AM
    Jim Oase
    After waiting a day for the rolling restore to happen, I called AppleCare because Apple had sent an email saying my service was back, and it wasn't. I still could send and not receive using Mail.
    Here is what fixed it. Go to MobileMe (terrible name) in System Preferences, log out. Then enter a garbage name and password and try to log in. This apparently clears the MobileMe preferences. Then enter your real UserName and PassWord. For me this was lights on.
    I am left wondering how long ago I could have had email had I known this preference reset scheme.
    Although for a different MMe issue it will clear out the MMe login info so you can enter everything anew and give it a fresh start.
    OT

  • Says I'm using 5.5 MB in my storage with email but yet I'm not logged into anything, Says I'm using 5.5 MB in my storage with email but yet I'm not logged into anything

    I'm basically out of storage in my phone, so when I went to manage my storage in my settings it says that my mail is taking up 5.5 MB but yet I'm not logged into any email account therefore I'm not sure how I would remove it

    Bojana321 wrote:
    ... this has only come up today yet it says I'm logged into mine!
    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • My new macbook pro (Mountain Lion) will not log into my 1and1 server to connect to my e mail. My snow leopard macbook does not have this problem - Apple support say it is a 1and1 problem! do I have to wait for an update of Mountain Lion?

    My new macbook pro (Mountain Lion 10.8.1) will not log into my 1and1 outgoing mail server. ( It will receive mail - but does not send)My old Snow Leopard macbook does not have the same problem ( server settings etc. are identical) . Apple Support say its a 1and1 problem , 1and1 say it is an operating System prob - I have tried changing port numbers.

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • I can not log into iCloud

    Please help - I've upgraded to ML 10.8 (and also 10.8.1) and i can not log into icloud.
    I get an error saying "You can not log in at this time".  I have no hair left on my head because I've pulled it all out!
    Now, there are many published fixes for this, but NONE work. I've tried everything I can find:
    Yes, I have an AU and US apple ID, and both dont work
    I installed ML from a fresh disk wipe + install.  No baggage from previous OS's.
    Everything is standard, no tricky fixes or apps
    No Little snitch installed
    Have deleted the ~/Library/App Support/iCloud folder
    Have deleted any preference files
    Have opened up the permissions on the ~/Library/Caches/iCloud folder
    Have reset keychain
    Have deleted all references of any @me or @apple accounts
    Have re-installed the ML OS from a DIFFERENT bootable USB stick
    No proxies, SOCKS, or mods to network
    Plain old home WIFI network, never had a problem
    Have icloud successfully set up at work (QC 2.8GHZ Mac Pro 2010), on my iPhone, iPad and Macbook Pro - Zero issues
    The mac having problems is a 2008 iMac, Core2Duo 2.8ghz Intel w 4gb 1067mhz ram) - Runs well, use for design.
    Is it a problem with the iCloudHelper process not having sufficient permission to write to the iCloud user DB? or the Accounts folder?
    Have looked into console, and when I try and log into iCloud, I get these three errors.  Same every time, no matter which apple ID account you use:
    1: AOSKit ERROR: (System Preferences[352]) AOSKC ([email protected]): Failed to store key, couldn't add kc item, error 100013 (service=iCloud, dsid=146089737)
    2: AOSKit ERROR: (System Preferences[352]) AOSKC ([email protected]): Failed to store account info key (dsid=146089737).
    3: AOSKit ERROR: (System Preferences[352]) Failed to store account info for appleID=[email protected]
    Please help!  Is this an incompatibiloty with the iMac problem, or a ML problem? 
    Much appreciated
    Rick

    Where EXACTLY are you trying to log in to it?
    Through your web browser at iCloud.com?
    Or through the iCloud system preferences pane on your Mac?

  • I can not log into iMessages

    I can not log into iMessage.
    It keeps giving me the error of unable to connect to network.
    It says:
    iMessage Activation
    Could not sign in.
    Please check yout network connection and try again.
    My email is correct and so is my password.
    It happens on wifi and 4G.
    What can be causing this?
    Stan

    Just hang tight, these services are taking a while to catch up with the traffic on the servers right now. things should start working as the evening goes on.

  • Can not log into server computer with any accounts - "You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."

    I have a Mac mini running the latest version of OS X and Server. Been running fine and flawlessly. However, I had a strange problem with the iCloud preferences panel crashing when I tried to access it, so I rebooted. Now I can not log into the system with any accounts. My master admin account (along with all the others) gives me the error:
    You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."
    I am able to see the server from other macs and I can log into it using the same account, but it only shows me a few of the shared folders I have access to but NOT to my main directories.
    Rebooting into Command-R and doing a disk utility, I try and repair permission on that drive and get a bunch of errors like:
    ACL found but not expected on Users
    Repaired "Users"
    ACL found but not expected on Users/.localized
    Repaired "Users/.localized"
    ACL found but not expected on Users/Shared
    Repaired "Users/shared"
    ACL found but not expected on Users/Shared/.localized
    Repaired "Users/Shared/.localized"
    Permissions repair complete.
    But rebooting is no joy...same problem. Any idea what is going on or how to repair it? Should I do a time machine restore? Complete new OS X install? Any idea what is causing this or how to salvage it?

    Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
    I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable.

  • ICal could not log into the caldav server

    Hi,
    I have a OS X Lion server that i am trying to set up for home. I have made an account for myself and have got mail running for it but when I go to turn on Calendars and Reminders, i get the error message iCal could not log into the caldav server "me.com". One I am not sure how this has anything to do with me but anyway, the mail compnent works. Also when i go to the folder webdav via browser servername/webdav/ i get permission denied. I also get and Unathorized message when I try to specifically access the calendar via adress https://servername:8443/calendars/users/username/ I mention the permission denied stuff because i am assuming they are all connected to the Calendar service (ie it runs on caldav which runs on webdav). can anyone help with this as I would like to get this working.

    One possiblity is that the user you created has not been granted access to the calendar service.  How did you create the user on the server, via Server.app?
    Are you able to browse to https://servername:8443/principals/users/username/    (of course substituting the appropriate server and user names)

  • After upgrading to Snow Leopard, I can not log into the computer. What Can I do?

    after upgrading to Snow Leopard, I can not log into the computer. What Can I do?

    SqueezeAce wrote:
    after upgrading to Snow Leopard, I can not log into the computer. What Can I do?
    Stick the 10.6 disk into the machine and reboot holding the option/alt key down on a wired/built in keyboard.
    On the second screen, under the Utilities menu is a Password Reset, use it.
    Step by Step to fix your Mac
    What this will do is reset the password and the user account permissions in the process.
    You might have problems with Keychain afterwards, to fix that.
    https://support.apple.com/kb/HT1631  https://support.apple.com/kb/TS1544
    If your still having trouble, look through these User Tips
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

  • HT201365 I reset my iPhone 4 and it says I need to log into my iCloud

    I reset my iPhone 4 and it says I need to log into my iCloud, but I don't have an iCloud even though it gives me the first letter to an email, of which I don't have. I bought my phone from Verizon when it was new. What do I do?

    It can't be tracked with Find My iPhone if it wasn't enabled, and even if it was it can be tracked if it's turned off.  All you can do is physically look for it.
    You might also want to read this: http://support.apple.com/kb/HT5668.

  • If I am not logged into skype, can hackers still g...

    Hi guys!
    So i have a question!
    Yknow how easy it is to get someone's IP address through skype? 
    Well i was wondering, if you're not logged into Skype on my computer, will they still be able to obtain my IP?
    I hardly use the computer and more of the mobile app and I already have an VPN on my tablet.
    (Btw I share this computer with my mother who doesnt want to get VPN for some reason.)

    You can share the purchasing Apple ID in Settings > iTunes & App Stores > Apple ID: (your dad's appleid here)
    With all other Apple services, iMessage, iCloud, Game Center, FaceTime etc. use your own Apple ID.

  • Safari for Windows will not log into IIS sites with Windows Authentication

    Safari for Windows will not log into IIS sites with Windows Authentication enabled. The IIS log has thousands of login attempts from Safari that result in 401 errors.
    I disable Windows Authentication on IIS and it works fine. The problem with that is that my Windows clients stop working properly with seemless logins when I disable this.
    The expected behavior is that Safari will work with basic authentication when NTLM does not work. That would result in a password prompt followed by a successful login instead of Safari stopping at "Loading" while hammering the IIS logs.
    It does this on all machines that I have tried.
    Any ideas or is this a bug?

    I noticed that as well. I have to wonder if it's due to not making note of the the different end of line characters between Mac OS X and Windows in code.

Maybe you are looking for

  • Shared photo streams not working in new iPhoto?

    I upgraded to Mavericks and the new iPhoto to be able to work with the shared photo streams I'd created on my iPhone, but they seem to be nonfunctional in iPhoto 11. I'll select photos, create a stream, and add the photos; the pictures will say "adde

  • Cooling fan issues

    Hi I just turned on my computer and i got a message saying "cooling fan not operating properly, computer will shut down in 15 sec-don not recommend using computer it can damange files or corupt harddrive.  Do i just have another cooling fan installed

  • When we connect two bw systems to one R/3 system?

    Hi , When we connect two bw systems to one R/3 system, could you please exlain what is the imact to SAP and BW in terms of query performance, batch performance,Develoment ,Quality system,security,BW Support. Thanks in advance. Regards, kranthi

  • HTTP Sessions / h

    At Workload Analysis (sol man diagnostics) what is the difference between the KPIu2019s u201Cavg http sessions / hu201D and u201CPeak http sessions / hu201D? Because I did a simple test at Sol Man Diagnostics, I selected a range of 1 hour at the same

  • Copying internal tables

    If I want to copy full contents of one internal table itab1 to another itab2, what is the best method? I see, Loop at itab1. Append itab1 to itab2. clear itab1. endloop. is ok. Is there any other simpler method using assigning etc? Thanks.