IWeb site update problem-app missing images/files, but site is ok
I created and uploaded a web site to my .mac (yeah, MobileMe) and it displays just fine. I have visited it from a couple of different comps. The problem is that I want to add/update files/pages, but when I open iWeb, several of the images/audio files do not display: shows a x-through and a centered question mark. They are in the sites idisk folder and in the laptop's copy of the files. When I try to replace the missing images/files by dragging onto the iWeb drafting page the following message appears: "the file can't be used because you don't have access privileges, or because it contains no content or was corrupted."
I'm afraid to make any updates for fear of losing what is already published.
Extra info: have family pack and am switching between .mac accounts because iWeb published to the iDisk corresponding to the account/sub-account you are logged into (BIG pain in the ***! It should have a password protected account toggle like Panther used). I have double-checked that the files for this site are only in the one iDisk account (am redirecting my masked domain url to the .mac iDisk server-works great.
Any ideas?
The upgrade from '06 to '08 which changed the domain.sites to a domain.sites2 caused more confusion, disasters and lost web sites than the bug ridden introduction of '09.
I ended up rebuilding all my sites from new, blank domain files in '08 and the conversion to '09 went OK apart from '09's nasty habit of changing media file links.
Fortunately, I have very little QuickTime content and don't use the iWeb Photos, Albums Blog or Podcast templates.
Most iWeb built sites look pretty awful when users stick to the default page width. I start from a Blank, Black or white page and trash everything on it.
I use the "standard" 980 px page width and most, if not all, of the iWeb themes do not adapt to this.
This is why I constantly ask the question. "Do the iWeb developers actually build any websites with the application?".
Perhaps if they did, we would get more bug free releases and some of the features that "real life" users are requesting.
Similar Messages
-
NSS6000 "Firmware Update Error: The firmware image file is corrupt."
Hello All,
I've recently run into a problem trying to update the firmware on our NSS6000 to either 1.20.1 or 1.21.0. We are currently running 1.16-3.
Each time after I click "Upgrade Firmware", the upgrade fails with the same error: "Firmware Update Error: The firmware image file is corrupt. Obtain another copy of the file and try the firmware upgrade again".
I've tried re-downloading the NSS6000_FW_1.20.1.tar.gz and NSS6000_FW_1.21.0.tar.gz several times from multiple PCs, and using multiple browsers. I've tried several combinations of Windows Server 2003R2, Windows Server 2008R2, Windows 7, and Firefox, Chrome, and IE 8/9.
The downloads all appear to be fine, and they all can open/extract with 7-zip without issue. The file sizes are always the same.
No combination of OS/Browser yields a different result on the upgrade attempt either.
I tried renaming NSS6000_FW_1.21.0.tar.gz to NSS6000_fwupgrade_0121.tar.gz to match the convention used in early versions (thinking that the extra "."'s could be the issue) but no luck either.
I was able to successfully re-apply the NSS6000_fwupgrade_0116.tar.gz firmware without any issues at all.
A strange thing I noticed, though, was on the "The system will reboot now. Please close your browser." window, it shows the device as an "NSS2000 2-Bay Gigabit Network Storage System" (please see attached screenshot). I'm chalking that up to a simple reusing-the-same-web-code issue rather than the root of the problem, but thought I should mention that as well.
Has anyone else run into this issue, or have any suggestions for workarounds in order to successfully upgrade the FW on this device? Thanks in advance for any suggestions.Hi,
Not sure what is going on i haven't see the issue you are having, can you try downloading both images at a different location; instead of behind your router. Also upgrade to .20 and then .21. Im pasting the release notes upgrades step.
When upgrading the firmware from v1.12 to v1.14, v1.12 to v1.20.1, or v1.12 to
v1.21.0 the Configuration GUI displays a "Programming images.." message
for more than 12 minutes (the time it takes to upgrade the firmware is
usually 5 to 10 minutes).
The workaround is to wait at least 15 minutes to complete the upgrade and
then power cycle the NSS by removing the power cord. Do not try and
access the Configuration GUI during this time. (CSCsx17923) When upgrading the firmware from v1.12 to v1.14, v1.12 to v1.20.1, or v1.12 to
v1.21.0 the Configuration GUI displays a "Programming images.." message
for more than 12 minutes (the time it takes to upgrade the firmware is
usually 5 to 10 minutes).
The workaround is to wait at least 15 minutes to complete the upgrade and
then power cycle the NSS by removing the power cord. Do not try and
access the Configuration GUI during this time. (CSCsx17923)
If this don't help you might have to give us a call @ 1-866-606-1866 and open a support case.
Thanks,
Jasbryan
Cisco Support Engineer -
I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.Can you drag it to the Desktop?
-
what is the best way to reconcile the iphoto, aperture, and lightroom catalogues, to ensure that no files have been lost? my macbook pro (2008) quit on me recently and i think that i am missing image files now. also i should say that i am backing up my iphone to the machine and not the cloud.
i should also say that i am now using a 27 inch imac (2011)
-
[svn:osmf:] 13570: Fix bug FM-310: Metadata video sample app missing readme file.
Revision: 13570
Revision: 13570
Author: [email protected]
Date: 2010-01-18 09:44:00 -0800 (Mon, 18 Jan 2010)
Log Message:
Fix bug FM-310: Metadata video sample app missing readme file.
Ticket Links:
http://bugs.adobe.com/jira/browse/FM-310
Modified Paths:
osmf/trunk/apps/samples/framework/MetadataVideoSample/MainWindow.as
Added Paths:
osmf/trunk/apps/samples/framework/MetadataVideoSample/readme.txt -
Restore new iPad Mini from iPad 1 backup. Ican update new apps from Apple store but most of my apps have been showing the Waiting status for over 12 hours. Store shows them as installed. What gives?
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
I am trying to purchase an app and update my apps all are free but it won't accept my card, all it keeps saying is that my payment method has been declined, I only have one card so can't try another. Now I can't use some of my apps because they are waiting to be updated. Somebody please help!!
Hello Sriggers,
Welcome to the Apple Support Communities!
I understand that you are attempting to update some applications on your iPhone but the payment method was declined. In this situation, I would recommend reading over the information in the attached article to help resolve the situation.
Pay an unpaid balance in the iTunes Store - Apple Support
Best,
Joe -
I tried to update the App that I purchased but the message told me that my Apple account is not valid for use outside of US and I must switch back to US store to able to do it. How can I switch the account from foreign countries back to US?
On your phone (from http://support.apple.com/kb/ht1311):
Change your iTunes Store country
Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information. -
I am trying to update my apps on my 4s but says there is not enough space. It shows i have 19.3 GB of 25 GB. Also, in my itunes...it shows about a quarter of space on the bar is photos but I took all the photos out. Don't make sense.
It's telling you there's not enough space *on your 4S*. The 25GB you refer to is probably that on iCloud, that's different memory than that on your iPhone. You need to delete video, pictures, apps, or whatever ON THE IPHONE, to make enough room for downloading updates to your apps.
-
An updated game app has erased itself but App Store still has it as 'Open'. Tried to reinstall but it won't allow me to. Any solutions out there?
Download to your iTunes library and
- First try syncing to the iPod
- Next backup the iPod to iTunes and then restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes -
IWEB site lost problem - have archive.html file
I've lost my previously published IWeb site but have found a full copy of it (photos and blog) on my computer here - file:///Users/.../Sites/Site.../J...s/Archive.html. It's no where else to be found. Is there any way/where that could restore this site to the web from this file alone? I had a serious computer issue and have lost many of those site photos.
janemci wrote:
If I get this old site back into IWeb...
Jane ~ It's not clear to me what the situation is. Do you have two iWeb Domain files on the same Mac? ...If so, it's okay to keep them separate (in their own folder) and open each as needed by double-clicking. By the way, for searching purposes it may be useful to know that an iWeb '06 Domain file is called "Domain.sites" and iWeb '08 & '09 Domain files are called "Domain.sites2" — although the “.sites” extension is usually invisible.
It's also possible to merge multiple Domain files into one — see this old beta software called iWebSites:
http://mistergregg.com/cocoadrillosoftware/iWebSites/
Post back with more info about what Domain files you have and where they're located and perhaps someone here will chip in with some good advice. But whatever you decide to do, first make backup copies of your Domain files — just in case. -
Saving/publishing site fails - Error in saving image files
A friend has created a simple portfolio site for his artwork (about 80 jpegs) but when he goes to save (or publish) iWeb says it can't save some of the images and shows a list of the ones it can't save and stops. I believe that the problem is related to image file name length. Is there a restriction on file length? If not has anyone seen error this before?
If it is file length the he will have to rename the files he moved in iWeb from iPhoto. I understand that it's impossible to change file names in iPhoto. Is this true?
Thanks
He is running iPhoto 6 on an iMac PPC 20" 10.5.4Hi Rob,
Coming to your error, it’s really strange. You can able to access/use your WCF service for a while and after sometime you get error. Few things which I would recheck are as follows:
Make sure it’s not due to your active directory. I would check if there are any issue with AD after an elapsed period of time to valid my app pool credentials.
In your Application-pool, under process model, try by increasing the “Idle Time-out (minutes)”. This time decides the amount of time worker process will remain idle before its shutdown.
I personally never required to change it from default value-20 mins, but looking at your issue, it’s worth trying this.
In your Application-pool, under CPU, Check the setting “Limit Action” to “KillW3WP”. Default is “NoAction”. “KillW3WP” setting potential could have impact like yours. If so change it to
“NoAction”.
When you create a WCF service using wizard, I expect to have default values; check any setting at IIS level is having an impact.
Few things I would try:
Create a separate App pool for this WCF service and check the impact
Reapply the credentials of you app pool. Just simply go to the “Identity” section and reapply the same valid credentials. This could clear any cache related things to do
with the credentials/AD validation.
I understand you’re overwriting the service/virtual directory while creating the SCF service in Wizard. Try manually deleting the virtual directory folder and create the
WCF server as fresh using Wizard, without using the overwrite checkbox.
Hope the above suggest helps.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Import Problems and Missing Images
Hi
Firstly apologies for this being so long and so detailed, but I wanted to include as much as possible to narrow down options.
I'd like to say before describing the problem(s) that I use lightroom 2 and have not knowingly changed any settings since I started using it last year.
It seems I've been having a problem with Importing and haven't been aware of it. I wondered if anyone can throw any light on the situation, or help pinpoint the problem(s) and provide any solutions. All images I've imported since starting with Lightroom have been stored in folders according to date taken.
Today I tried importing photos all taken on the same day, on the same memory card. The images had never been imported, or on the computer before. I used import from device and left it to get on with it. When I checked back, only five images seemed to have been imported and three other image file names were shown with grey boxes.most of the images had not been imported, so I started import again.
This time all the remaining images were imported. However, when I looked across at the 'Folders' list there were now two. Previously I had only ever noticed/used one. The names of the two are "Local Disk (C:)" and "Backup (D)". The first only has three folders in it from July and September 2009. One of these contains the images from the restarted import. They all seem fine. The second [Backup (D:)] contains all othet folders since 2002 and a folder with the first five of today's images.
The five images from today in "Backup (D:)" are all blurry. Also, when I try to open them I get the following messages. Either "The fie appears to be unsupported or damged" or "The file named IMG... is offline or missing". Although I was concerned, I decided to leave it and look into it later. I then started to work on some photos I'd taken in July, in the folder shown in list "Backup (D:)". All these photos came from a different camera and different type of memory card.
Halfway through reviewing these images I came across lots of greyed out boxes each with a file name corresponding to photos I had taken. When I click on any of the greyed out boxes, or one of the perfectly clear images I get the same message as above for the five images from today. If I open one of the images from July in Develop and click on 'File' there is no 'export' option. I haven't had time to check yet, but suspect there may be more folders like this one. (Big sinking feeling!)
Again, apologies for the long description of the problem, but if anyone can help with any of the following questions I'll be very grateful.
Why has this problem started to occur with 'import' and any suggestions for rectifying it, apart from checking all images straight after importing?
Even though I have very sharp images in 'Library' and 'Develop' for the July images, have I lost them? If not, where can I find them, or how can I export them? It may be worth mentioning that the memory card the images were originally on has been formatted and I think used since.
Finally, how can I get back to one safe working list of folders. This includes how do I get the working ones in both lists into one?
Thanks for reading this and I look forward to any suggestions for any of the problems.
GrahamHi
An update on the situation. First some more information that may be of relevance later. I started out with LR1 and updated to 2 when it became available. There were a couple of glitches, but when I did, I just imported the settings directly from 1. I can not remember any of the settings I specified now. On my computer I use two physically seperate hard drives, with the 'D' drive being for backups.
Back to the problem. We can now eliminate faulty files or images. After some exhaustive searching all of my photos are well and healthy in a folder I created in 'My Documents" called "Photos" (how original). In that folder there are sub-folders with dates only and others with names like "imported in 2009 20th July". Each of these folders contains the images imported in to LR on that day (not taken on that day).
I also have a folder on the 'D' drive called 'Lightroom' that has lots of sub-folders with dates. These contain images imported into LR and are all sorted according to the date taken. I assume that this must be the automatic backup. when I tried to open the folder for the July images that were faulty in LR, I got a 'corrupted' message. The original images are all fine on the 'C' drive in the 'Photos' folder. I'm assuming the corruption probably occured on backup.
Please correct me if I'm wrong, but this leads me to believe that the issue in LR for me is a database/catalog one. In my first post I explained that under 'Folders' I have somehow regently aqquired a second option ("Local Disk (C:)" and "Backup (D:)"). I only recently noticed this and previously had only one list with folders. What I now need is help in getting LR to offer me the options of the images in "Photos" on the 'C' drive.
When I go to "File\Recent" in the catalog section of LR I'm offered two options.
The first is "Lightroom 2 Catalog-2.Ircat-(Filepath to Lightroom)\Backups\2009-09-05 1155" This option is ticked.
The second is "Lightroom 2 Catalog-2.Ircat-(Filepath to Lightroom)" This option is not ticked.
When I look in the "Lightroom" folder, that I assume LR created in "My Documents" I can see a sub-folder that relates to the first option in the "Backups" folder.
I'll post this now, but if detailed information about all the folders, sub-folders and files displayed in the "Lightroom" folder could help, I could provide it.
Thanks again for reading this and the help/suggestions so far. Any thoughts, suggestions, or solutions will be much appreciated.
Graham -
Mobile app missing images only after packaging for App Store?
This is general, but I was wondering if anyone else has had this problems, as it's happened to 2 different apps I recently posted to the app store.
Basically, the apps worked in the simulators fine, I intalled and tested on 10 different iphones, and it works fine. When I packaged up the app, and downloaded from the app store after approval there were various missing images. For example, 3 images on a page with 6 png would be missing. They weren't loaded any differently.
So I rechecked the app in flex simulators, worked fine, installed on phones, worked fine. I could not replicate problem anywhere. I randomly just resaved out a few images and that 'appears' to have worked. So when my next app was exhibiting the exact same behaviour, i 'resaved' out the broken images and a few were fixed, but a few are still broken.
This is just so strange, since I can't replicate the issue anywhere except after downloading from the app store.
Anyone else having similar issues?
thanksMake sure your paths are *NIX compatible. Things like incorrect case or spaces in the file name will work just fine in the emulator, but fail on the device.
Are you saying the images work when installed on the device using a provisioning profile, but that very same app doesn't work when downloaded from the app store? If that's the case, the problem is probably in your build settings (IE. not including all the asset files, etc.) -
What's the fix for "missing (image) files" that won't save?
I keep re-entering some images on my iWeb site & save them, only to find them "missing"????
Help! Thanks.
SunnyHow are you adding the images to iWeb - dragging them onto the page or onto a Photo template?
Where are they missing from - the published website? If so, try publishing to a local folder...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
... and launch the site in the browser by double clicking the index.html file. Are the images still missing?
Maybe you are looking for
-
LiveType Credit Roll Text Blurry Shaking in DVD Studio Pro Completed SD
I first created text scrolling directly from inside FCP. The texts appear shaking/blurry in the exported MOV. After trying different font family/size but still getting the same bad result, I did more research. I then created the credit roll in LiveTy
-
Loading BW Cube from R/3 using ABAP
I am new to BW thus this question. I have an ABAP program called Z_ABC in SAP R/3 . Can I create a BW Cube taking using this program as an input? If not what are the steps needed in order to create a BW Cube if I know the tables that are used in the
-
To add value in LOV for Attachment Catorgy
Dear ALL I want to add value in lov in catagory Discription ..( When we click on Attachment Icon , there is a column CATAGORY.. in that i would like to add a value ... how can i do it .. please help... Thanx in advance.. Edited by: 790113 on May 25,
-
I can't open system preferences on mac os x v10.5.8
Does anyone know how i can open system preferences on my Mac os x v10.5.8?
-
What's the best way to transfer apps to another iPad?
I just upgraded from the original iPad to the iPad 4th gen, and I want to transfer apps and their saved data as well if possible so I don't have to repurchase them. What's the best way to do this?