IWeb sites with photo slideshows after migration from MobileMe

I raised this question in another discussion earlier today in response to another post in the MobileMe forum (no answer yet), but the recent confirmation about the death of MobileMe webhosting brings new urgency to this question for me, so I figured I'd post it in the iWeb forum.
I knew that if I migrated my iWeb sites to another host, I'd lose the counter, etc. I wasn't concerned about that, and don't have a blog or comments area that would be impacted. But, on my two sites (iWeb -->MobileMe), there are many pictures--and slideshows are an important part of those sites. Will the slideshow feature of iWeb be able to be used after I migrate to another host such as hostexcellence or godaddy??? If that's true, then I really do have a problem. (I'm not talking about galleries from iPhoto to mobileme, but photo pages in iWeb sites.)
I've spent a ton of time over the last couple of years on those sites, and would hate to redo them. While there may be alternatives to the iWeb slideshow, it will take me quite a while to figure it out. (I never had a desire to learn how to do that--if I did, I wouldn't have needed iWeb.)
If anybody who uses the iWeb slideshow on a photo page and has their sites hosted somewhere other than MobileMe could let me know--I'd appreciate it. (Let me know which host you use please!) Thanks.
I guess related to this, if it's absolutely not going to work anymore, suggestions would be appreciated. Do I have to redo my sites for this? Is there an "iWeb like" program that has an easy to use slideshow for a photopage that would work? If so, I guess I have a year to redo my sites. )

Past experience has taught me not to rely on media player assets on third party servers. Yahoo pulling the plug on the EasyListener player is a case in point.
As OT has pointed out, the slideshow works on other servers but, according to Cyclosaurus, some necessary assets are on the Apple server.
Wouldn't it be reasonable to expect that Apple will make these assets available after the demise of MobileMe if enough people requested this?
The iWeb method of getting media onto websites leaves a lot to be desired and there are a lot of other ways to display music, movies and photos. The photo page is one of iWebs few triumphs but there are many alternative slideshows and banners.
Most of these methods require that assets are uploaded to, ideally, your own server but its not so difficult once you grasp the concept and the basics of FTP.
iWeb does provide two other methods of publishing apart from MobileMe. The built in FTP is just as quick, easy and convenient as publishing to MobileMe once you set it up.
Publishing to a local folder and uploading via an FTP app. allows you to add SEO tags and optimize the files for faster download.
A good FTP application makes the task of uploading media player assets very easy - drag and drop.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Similar Messages

HT204655 How to have a unified Photos Library after migrated from iPhoto and Aperture?

The "HT204655: Get started with Photos for OS X" do not help. If you have previously used iPhoto and Aperture, when you "migrate" the iPhoto, then follow the steps to "migrate" the Aperture library, you end up with 5 files in your Pictures folder: Photos Library (from iPhoto), Photos Library 2(from Aperture), iPhoto Library (Not sure if can be deleted or not - of course no), Aperture Library (for some reason blank), Aperture Library 2 (Created by Photos?).
So, looks like a mess and no easy way to make a clean migration.
I've a hope that exists a solution to have a single Photos Library with the merged iPhoto and Aperture contents, like a real migration.
If I export everything (From iPhoto and Aperture) then import in the Photos in a single Library should work, but will lose all the organization, faces, etc...

You could merge libraries with iPhoto Library Manager, but I never tried this for merging Aperture 3 libraries with iPhoto 8.
Are you planning to keep all your photos in iCloud? Then consider to merge them in iCloud, but it will take a long time.
Are you using iCloud Photo Library (Beta) and have enough iCloud storage for the merged library?
Wait, till your current Photos Library has been completely uploaded to iCloud.
Then quit Photos, and launch it again, while holding down the alt/options key. Select the old iPhoto lIbrary.
When the upgrade of the old library has been finished, make this library the System Photos library (in the Photos Preferences > General).
Enable again iCloud Photo Library (Beta) in the Photos > iCloud preferences.
Now Photos will upload the new library to iCloud as well and create a merged library in iCloud. After this merged library synced with your Mac, you will have a merged Photos library.

Performance issue with view selection after migration from oracle to MaxDb

Hello,
After the migration from oracle to MaxDb we have serious performance issues with a lot of our tableview selections.
Does anybody know about this problem and how to solve it ??
Best regards !!!
Gert-Jan

Hello Gert-Jan,
most probably you need additional indexes to get better performance.
Using the command monitor you can identify the long running SQL statements and check the optimizer access strategy. Then you can decide which indexes might help.
If this is about an SAP system, you can find additional information about performance analysis in SAP notes 725489 and 819641.
SAP Hosting provides the so-called service 'MaxDB Migration Support' to help you in such cases. The service description can be found here:
http://www.saphosting.de/mediacenter/pdfs/solutionbriefs/MaxDB_de.pdf
http://www.saphosting.com/mediacenter/pdfs/solutionbriefs/maxDB-migration-support_en.pdf.
Best regards,
Melanie Handreck

Problem with method action after migrating from TP2 to TP4

Hi,
we are migrating our application (ADF Faces, ADF BC) from TP2 to TP4. We have encountered several problems.
The biggest that we could not solve is as following:
In our View Object's RowImpl.java classes we have method void refreshLOVAccessorQueries(). In a number of View Objects that method is placed in client interface. In pageDefs of jspx pages that are bound to that View Objects we have method action like
<methodAction IterBinding="TeeCronTtVOIterator"
id="refreshLOVAccessorQueriesCron"
InstanceName="bindings.TeeCronTtVOIterator.currentRow"
DataControl="TradingAppModuleDataControl"
RequiresUpdateModel="true" Action="invokeMethod"
MethodName="refreshLOVAccessorQueries"
IsViewObjectMethod="false" IsLocalObjectReference="true"/>
and invoke action like
<invokeAction id="refreshCronLOVs" Binds="refreshLOVAccessorQueriesCron"
Refresh="prepareModel"
RefreshCondition="#{!requestContext.postback and empty bindings.exceptionList}"/>
When we are accessing such a jspx page the application rases error:
"Method bindings.TeeCronTtVOIterator.currentRow.refreshLOVAccessorQueries() not supported "
In TP2 everything worked fine. Now in TP4 for some VO that refresh is OK and for others just mentioned error is thrown. Confusing is that all View Objects and their java classes are created in the same manner and they are almost identical, and this counts for pageDefs too.
What could be the reason of all this?
Second thing is that in adfc-config.xml in backing bean defs we have managed-property like:
<managed-bean>
<managed-bean-name>regionBacking</managed-bean-name>
<managed-bean-class>app.view.backing.RegionBacking</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>bindings</property-name>
<value>#{bindings}</value>
</managed-property>
</managed-bean>
JDeveloper warn us about that with: ' EL token bindings" is unknown '. Why is that? It looks that everything connected with that managed property works fine.
Another problem is not severe but unpleasant
After migration to TP4 nothing (not one element) is visible (shown) in the design view.
The structure of the pages is similar as in the StoreFrontDemo and it shows just fine in TP2.
Thanks!!!

Thanks Frank,
but working from beginning is to much work so, we have solved it in another way.
Regard to first problem we discovered that it is happening only when there is no Rows in iterator for which we are invoking action. In invoke action we have changed refresh property to default value and the problem is solved.
Second thing is warning that has no other effect so we will ignore it.
About third problem, when we create new working copy of application in JDeveloper without system11.1..... directory, JDev works fine and all jspx pages are shown in design view. After some work, due to undiscovered reason design view is lost... What could cause this?
Maxa

Problem with some queries after migration from MS Access

Hi everyone!
We've just finished a migration from a MS Access database and we notice some errors when running some queries like :
Query1:
SELECT A.field1, A.field2, B.field1 as FieldTmp
FROM A,B
where (B.field1 <=10);
Query2:
SELECT Query1.field1, Query1.field2, Query1.FieldTmp
FROM Query1 LEFT JOIN Table3
ON (Table3.field1 = Query1.Field2) AND
(Table3.field5 = Query1.FieldTmp)
WHERE ((Table3.field5) Is Null)
ORDER BY Query1.field1, Query1.FieldTmp;
The Query1 runs as expected, but when I try to run the Query2 I got a ORA-00904 error message. If I remove the (Table3.field5 = Query1.FieldTmp) statement or modify to compare with another field (as instance, field2) everything goes fine.
If I modify the first query to a make-table query, the Query2 request runs as desired too.
Is there anything that we can do to keep the queries statement as it is when using the MS Access DB?
Thanks in advance,
Elaine Viel Denadai

Hi Turloch! Thanks for your help!
Those SQL Statements were extracted from the MS Access application that we will continue to use to access the data , now on an Oracle Database.
I don't know what I can do to make this kind of statements works as it is on Access database. The first query, that I called Query1 works fine on Oracle, I just mentioned it because the 2nd Query , named Query2, use it.
I'm not able to understand why when I change the 1st. query to a "make-table" query the Query2 works as desired, but if I keep the Query1 and Query2 as it is on the MS Access Application I got the ODBC error message and the ORA-00904 error message , related (I think!) to the FieldTmp field used on the LEFT JOIN statement (AND).
As I told before, if I change the AND clause to compare to another field, as instance, field1 :
FROM Query1 LEFT JOIN Table3
ON (Table3.field1=Query1.Field2) AND
(Table3.field5 = Query1.Field1)
it works.
Please, is there anything that I can do to keep the MS Access Application unchanged?
Oracle = 8.1.6
Oracle ODBC Driver = 8.1.6.4
Oracle Migration Workbench = 1.3.1
Thanks in advance,
Elaine Viel Denadai

POST MIGRATION - Project Site cannot be found after migration from 2007 to 2010

Hi,
I have done full migration from Project Server 2007 to Project server 2010. All the databases have been restored. The details in the Project Center are coming correctly. But When I open the Project Site , I get error webpage cannot be
found.
I have done the Bulk update but it is not updating the URL to 2010 URL.
Please help.
Regards

Use PowerShell to list all the sites in your PWA site collection.
There are many examples online.. Here is a link that is useful
http://blogs.msdn.com/b/vijay/archive/2009/10/01/how-to-list-all-the-sub-sites-and-the-site-collections-within-a-sharepoint-web-application-using-windows-powershell.aspx
Cheers
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Outlook can't connect with Exchange 2013 after migration from Exchange 2007

<style type="text/css">P { margin-bottom: 0.21cm; }</style>
Hello,
recently we've done a Exchange 2007 sp3 to 2013 sp1. Users can conect perfectly with OWA and with his iphone clients.
But the problem is they can't connect from his Outlook clients (2010, 2013), both internaly and externaly. Always fails with the message: The Connection to Exchange it is not avaliable.... Can't resolve the name of Exchange server.
To try to resolve it we've done:
- Check Outlook anywhere configuration en EAC: it is configure with and external url mail.company.com and internal server.domain.local. The security is the default Negociation, but we've tried all.
- Check the internal dns, there are records for mail.company.com and exchangeserverdomain.local pointing to the exchange local ip. Also there is a public zone company.com with the record mail.caompany.com pointing to the exchange local ip. Also we've made
records autodiscover.company.com and autodiscover.domain.local pointing to the exchange local ip.
- In the public dns from our domain there is the record A and MX pointing our public ip. There aren't any record Autodiscover but we think that the manial conection should work.
Check certificates: we've made a new self-signed certificate including all this internal and external domains and for all services.
- Check Outlook Anywhere block: we've cheked.
Currently server state:
- Old Exchange 07 server can't start, it was in very bad state and we achieved migrate the mailbox to the new server, after that we tried to uninstall, but it crashes with a public folder replication error. We got uninstall all the roles
unless the mailbox. After a restart it can't start.
-The new Exchange 2013 looks great, there isn't any trail of the old server, or we haven't seen anything in the EAC or shell.
I paste below the result of Microsoft Remote conectivity analaizer, with Outlook anywhere test. It is clear that there is a problem with that.
Sorry because the test is in spanish and I translated it with google, from here I only can access the tool in spanish.
We continue to try to resolve the problem.
Thanks to all in advance!
Testing RPC / HTTP connectivity.
Error in testing RPC / HTTP.
additional Details
Elapsed time: 24295 ms.
Test steps
Connectivity Analyzer Microsoft is trying to test Autodiscover for [email protected] .
Error in automatic detection test .
additional Details
Elapsed time: 24294 ms.
Test steps
Attempting each method of contacting the Autodiscover service .
Failed to properly contact the Autodiscover service using all methods.
additional Details
Elapsed time: 24294 ms.
Test steps
Trying to prove possible Autodiscover URL https://empresa.com/AutoDiscover/AutoDiscover.xml
Error in testing this potential Autodiscover URL .
additional Details
Elapsed time: 1509 ms.
Test steps
Attempting to resolve the host name in DNS empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 80.36.252.194
Elapsed time: 507 ms.
Testing TCP port 443 on the host to ensure empresa.com listening or is open.
The port was opened successfully.
additional Details
Elapsed time: 464 ms.
Testing the SSL certificate to make sure it is valid.
The SSL certificate is not exceeded one or more certificate validation checks .
additional Details
Elapsed time: 537 ms.
Test steps
Connectivity Analyzer Microsoft is attempting to obtain the SSL certificate from remote server on port 443 empresa.com .
Connectivity Analyzer Microsoft successfully obtained the remote SSL certificate.
additional Details
Remote Certificate Subject : CN = mail.empresa.com , issuer : CN = mail.empresa.com .
Elapsed time: 454 ms.
Validating the certificate name .
The certificate name was validated successfully .
additional Details
Hostname empresa.com was found at the entrance of the alternative subject name of the certificate.
Elapsed time: 1 ms.
Is validating the trusted certificate .
Validation Error trusted certificate.
Test steps
Connectivity Analyzer Microsoft is trying to build certificate chains for certificate CN = mail.empresa.com .
Could not build a certificate chain for the certificate.
Tell me more about this issue and how to resolve
additional Details
The certificate chain did not end in a trusted root . Root = CN = mail.empresa.com
Elapsed time: 31 ms.
Trying to prove possible Autodiscover URL https://autodiscover.empresa.com/AutoDiscover/AutoDiscover.xml
Error in testing this potential Autodiscover URL .
additional Details
Elapsed time: 21723 ms.
Test steps
Attempting to resolve the host name in DNS autodiscover.empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 46.16.56.40
Elapsed time: 498 ms.
Testing TCP port 443 on the host to ensure autodiscover.empresa.com listening or is open.
The specified port is blocked , not listening or does not generate the expected response .
Tell me more about this issue and how to resolve
additional Details
Network Error communicating with the remote host.
Elapsed time: 21224 ms.
Attempting to contact the Autodiscover service with the HTTP redirect method .
Error when trying to contact the Autodiscover HTTP redirect method .
additional Details
Elapsed time: 606 ms.
Test steps
Attempting to resolve the host name in DNS autodiscover.empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 46.16.56.40
Elapsed time: 14 ms .
Testing TCP port 80 on the host to ensure autodiscover.empresa.com listening or is open.
The port was opened successfully.
additional Details
Elapsed time: 202 ms.
Connectivity Analyzer Microsoft is checking the automatic detection of host empresa.com for an HTTP redirect to the Autodiscover service.
Connectivity Analyzer Microsoft could not get a HTTP redirect response for Autodiscover .
additional Details
Web exception occurred because an HTTP 404 response was received - Unknown NotFound . Headers received: Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27:58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 +
lenny3 with Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3 HTTP Response Headers : Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27: 58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 + lenny3 with
Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3
Elapsed time: 388 ms.
Attempting to contact the Autodiscover service using the method of DNS SRV redirect server.
Connectivity Analyzer Microsoft could not contact the Autodiscover service using the DNS SRV redirect method .
additional Details
Elapsed time: 186 ms.
Test steps
Trying to find the SRV record in DNS _autodiscover._tcp.empresa.com .
Not the Autodiscover SRV record in DNS found .
Tell me more about this issue and how to resolve
additional Details
Elapsed time: 186 ms.
Checking for a CNAME record for Autodiscover in DNS for your domain " empresa.com " to Office 365.
Could not validate the Autodiscover CNAME record in DNS. If your mailbox is not in Office 365 , you can ignore this warning.
Tell me more about this issue and how to resolve
additional Details
No Autodiscover CNAME record for your domain ' empresa.com ' .
Elapsed time: 268 ms.
jspt

Hello,
We have the Self-signed certificate that comes with Exchange, and we've created a new self-signed including all our domains mail.company.com, domain.local, exchange13.domain.local, autodiscover.company.com, autodiscover.domain.local.
below I print you the result os the comand Get-ClientAccesServer | fl . Now we've configured a SPC objetct folow the instructions of Wizard
Exchange Server Deployment from Microsoft. We've executed the commands in our new Exchange 13, but can't did it in the old Exchange:
$AutodiscoverHostName = "autodiscover.contoso.com"Get-ExchangeServer | Where {($_.AdminDisplayVersion -Like "Version 8*") -And ($_.ServerRole -Like "*ClientAccess*")} | Set-ClientAccessServer -AutoDiscoverServiceInternalUri https://$AutodiscoverHostName/Autodiscover/Autodiscover.xmlThis is the result of
RunspaceId                           : 89c86f8e-d156-4480-b31d-59215976879b
Name                                 : EXCHANGE13
Fqdn                                 : EXCHANGE13.domain.local
ClientAccessArray                    :
OutlookAnywhereEnabled               : True
AutoDiscoverServiceCN                : EXCHANGE13
AutoDiscoverServiceClassName         : ms-Exchange-AutoDiscover-Service
AutoDiscoverServiceInternalUri       : https://autodiscover.company.com/Autodiscover/Autodiscover.xml
AutoDiscoverServiceGuid              : 77378f46-2c66-4aa9-a6a6-3e7a48b19596
AutoDiscoverSiteScope                : {Nombre-predeterminado-primer-sitio}
AlternateServiceAccountConfiguration :
IsOutOfService                       : False
WorkloadManagementPolicy             : DefaultWorkloadManagementPolicy_15.0.825.0
Identity                             : EXCHANGE13
IsValid                              : True
ExchangeVersion                      : 0.1 (8.0.535.0)
DistinguishedName                    : CN=EXCHANGE13,CN=Servers,CN=Exchange Administrative Group
                                       (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=First Organization,CN=Microsoft
                                       Exchange,CN=Services,CN=Configuration,DC=domain,DC=local
Guid                                 : e83055fe-217b-4ed6-9cd0-7711097baf99
ObjectCategory                       : domain.local/Configuration/Schema/ms-Exch-Exchange-Server
ObjectClass                          : {top, server, msExchExchangeServer}
WhenChanged                          : 09/03/2014 12:46:07
WhenCreated                          : 08/03/2014 19:15:54
WhenChangedUTC                       : 09/03/2014 11:46:07
WhenCreatedUTC                       : 08/03/2014 18:15:54
OrganizationId                       :
OriginatingServer                    : severdc.domain.local
ObjectState                          : Unchanged
I hope this stuff can help you.
Thanks!!
jspt

Photos disappeared after migrating from iPhoto to Photos

I just upgraded to OS X 10.10.3 and the Photos App, however when I started to migrate my iPhoto libraries (have nine(9) libraries) no pictures show up on the third one I migrated. I checked and the migrated library file has been created (11.3 GB) however nothing shows up when I select the library file and open it.
Any suggestions by anyone would be appreciated.
iMac (24-inch Early 2008), OS X Yosemite (10.10.3)

Delete the migrated version, repair the Library with iPhoto and try again.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Problem with "missing" songs after migrating from Win PC to Macbook

Hello,
I'm trying to move my daughter's iTunes library from her old Win PC to her new Macbook Pro. I mostly got it right, but there are roughly 100 songs which do not play because they cannot be found. I can click through each and "find" them for iTunes, such that they will work, but is there a way to do this globally at once?
I suspect it has something to do with "Consolidate Library", but I can't quite seem to make that work. How can I tell the Mac to search out ALL missing songs and reconnect them (or even move the files all to the iTunes folder)?
I think I should have done a “Consolidate” on the old machine first, but is there a way to salvage this without starting completely from scratch?

Authorize the computer.
iTunes Store: About authorization and deauthorization - http://support.apple.com/kb/HT1420 - and another helpful post: https://discussions.apple.com/message/17828050

After migrating from MobileMe to iCloud I lost junk mail filtering

Now I get junk mail on all of my mobile devices. Is there a fix?

I'm also having this problem with no junk mail filtering...anyone have any suggestions?

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

I don't see my images on Photo after migration from iPhoto

i recently purchased an iMac, which uses Photo, and don't see my photos after migration from an older mac which has iPhoto. I see the event folders and the photo count but there's no actual image! Help.

Is it here?
http://www.imore.com/yes-camera-roll-gone-ios-8-heres-where-it-went-and-why

Problem with Java Native Type after Migration from 7.0 to 7.1

Hi,
after Migration from Netweaver 7.0 to Netweaver 7.1 I get following error:
FileDownload 'FileDownload.data': Context attribute 'PrintSelectedView.PdfToDownload.resourceInputStream' has the Java native type 'com.sap.tc.webdynpro.progmodel.api.IWDInputStream' and cannot be bound to this property. Hint: Remove the binding or bind a context element matching the property's type.
What have I done wrong?
How could I fix this problem?
Best regards,
Peter

Hi,
thanks, this solved the problem.
Thank you.
Best regards,
Peter

Whether using Oracle after migrating from MySQL be easy or not?

Though oracle is tough secured one, I don't know exactly the complexity of using Oracle database. Using MySQL 4.1.22 in my website https://www.puntercalls.com/ . Though the site is based on providing share market tips, it deals with a huge amount of stock market data and in much more real time basis hand-to-hand with NSE and BSE info which means a tough security is the utmost demand of the time.
My question is whether using Oracle after migrating from MySQL be easy or not. You can check my site at https://www.puntercalls.com/ for different real time data updation parts.
Kind suggestions are greatly appreciated in advance!
Edited by: 968684 on Oct 31, 2012 7:04 AM

Hi,
As you are really asking about how to setup and use securioty features in an Oracle database it woul db ebetter to raise the question in this forum -
Forum: Database Security - General
Database Security - General
They will have more knowledge about Oracle security features and which it would be best for you to use.
Regards,
Mike

Is it possible to have 2 iWeb sites with one .mac account?

I am trying to create a business site with my CV (resume) and work credentials as well as a personal site with photos etc for family and friends. Is this possible to do with iWeb?

To keep sites totally separate for publishing you
need to keep their data files totally separate,
either by switching them in and out or by running
iWeb from separate user accounts. The data file is
located at
Users/username/Library/Application
Support/iWeb/Domain
thank you -- that's gonna have to be the answer I guess, til they hopefully add a new feature.. my non-.mac site is for my kids' swim team, so I'll just create a 'swim team' user account for now. Not TOO inconvenient, I don't suppose.
If you have two sites in the same data file already
you can separate them by making a copy of the current
Domain, then deleting one site from the current
Domain, putting that somewhere safe, inserting the
old Domain copy, and deleting the other site from
that, giving you two Domains each with one site.
keeping my fingers crossed that this works.
thanks again,
Jo

IWeb sites with photo slideshows after migration from MobileMe

Similar Messages

Maybe you are looking for