Iweb tabs not working online

For me, using my mac i have no problems navigating my webite thru www.com. When others try and navigate, they can open one (or two?) pages, but after that no hyperlinks will allow them to go any further... any help??
Thanks

If you want to keep the reflection and have it compatible with IE then try the method described in this tutorial, #7 - Converting Photos w/Frames, Drop Shadows and/or Reflections into a Single JPG Image, which is base on information provided by Koeklin in a previous topic. Works like a charm.

Similar Messages

  • Iweb archive not working online

    I've had church website up and running for a year. Every week I upload a new sermon between 25-30mgs. There are about 52 by now. This time when I went to the site online I noticed the Archive page was is working even though it's working in the program. When you click on the subject nothing happens. Also the "previous" button and other buttons at the bottom are not working either. When I opened the iweb file now the archive button is green. Any suggestions?

    Thank you for replying. I had a box with a rule around most of the content on the page. I tried selecting it and sending it into the background. This seemed to be the problem and the archive page is working online for the moment. But in iweb the "archive" icon is still green. What does this mean. If you want to look at the site the URL is www.ccc-hc.org.

  • IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
    Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

  • IWeb is not working!!!!!

    My iWeb is not working right!!! All the widgets (exept for iPhoto and iMovie) do not work, every time a place the widget it just shows a selection square were the widget should be. The same thing happends when I chose to show the navigation on the top of the page, just a blank box. I have already called the apple support and tried many different things, like uninstalling iWeb and nothing changed then he took me thought endless steps for hours and nothing. I also went to an apple store and no one there new how to fix it ether. I need this fixed NOW!!!
    Please help!!!

    I would go to an apple store and talk to someone face to face but the closest one is over 800 miles away. I tried to talk to someone in an apple store wile I was on vacation but that did not have room for me. But I did get a chance to talk to a sales man and he didn't know jack.
    I have already uninstalled and reinstalled with the application disk and it did not do anything. I have also tried accessing the widgets on another account and I have the same problem. I could try the download though, that might just work.
    I have also had the problem of, when I make a 'blog' the box that should have the blog excerpts Is also blank and I can't even double click it, and when I do it just does what everything else does and shows a blue outline around the box and nothing else.
    I wish someone knew something about this problem!

  • IE 11 - Open in new Tab Not Working

    When I click on a link that should open in a new tab (or right-click and select Open in new Tab), IE11 Opens a new tab but the screen is blank, the URL is about:blank and the tab title is 'Blank Page'.
    Windows 8.1 x64
    Internet Explorer 11 (Desktop)
    The 'Metro' version of IE 11 still works fine, it's just the Desktop version which is broken.
    I've tried all the fixes listed in the similar thread, but none have helped.
    IE 11 TABS NOT WORKING
    IE 11 opens blank tab

    Thanks, I ran a Command Prompt (Admin) and ran the following scripts:
    ie8-rereg.32on64.cmd
    ie8-rereg.64on64.cmd
    Both seemed to execute correctly, but haven't made a difference.
    Unfortunately they have never been a complete repair and now, due to security/obscurity have been made even less effective.  There was an example in here a while ago in which the poster helped me see that exploiting the original manifests might have
    been a better tack for a repair.  IIRC they uncovered some registry corruption which seemed related to mshtmled.dll but which was not repaired by registering that module and was damage which was only hinted at by looking at the manifest. 
    The poster's repair was found by comparing registries from otherwise identical systems...
    OMG look what this recollection has dredged up:  <lol/>
    http://social.technet.microsoft.com/Forums/ie/en-us/08f7a0f7-6f4b-4def-b399-12a0c281655a/ie9-wont-open-pages-just-give-a-new-tab-thats-blank?forum=ieitprocurrentver
    Interestingly, I came across another oddity which might indicate the behaviour is some sort of change to the IE security settings. On a site I frequent http://www.makegamessa.com/ none of the links work.
    They've all previously worked and they still work in other browsers, just not my IE. If you click a link it is supposed to open the page in the current window (i.e. not opening a new tab), but nothing happens. However, if I have the F12 developer tools open,
    then the links all work as expected OR if I add the site to Trusted Sites the links also work.
    That sounds like Active Scripting is inhibited.  Scripting would be disabled in a Restricted security zone or in an Internet zone which was set to High level.  Scripting would be enabled in a Trusted security zone.  Scripting would be required
    in order to use IE11 Developer Tools since that is its implementation.  It hadn't occurred to me that that might provide an override for Scripting which had been otherwise inhibited.
    FYI
    Robert Aldwinckle

  • MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICK ON TAB

    MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICKING ON TAB

    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • Which parts of iWeb will not work on third-party servers?

    Hello,
    I'm migrating my site so some new parts
    I would like to know exactly which parts of iWeb will not work on third-party servers.

    Features Unavailable When Publishing to a Non-Mac Server:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    From iWeb 3's Help
    In addition, unless iWeb is modified by Apple or yourself the forward, back, pause and play buttons of the iWeb slideshows will not display once the MMe servers are taken off line: 
    However, if you follow the directions in this tutorial you can work around that: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
    OT

  • IWeb Navigation Tabs Not Working

    Hi,
    I just posted my webpage to my school network folder... and the navigation tabs on the "About Me" page are not working.. they work on every other page. I thought maybe it was the page, so I deleted it and created a whole new "About Me" page and ran into the same problem. The site is http://people.clemson.edu/~lindsaa/GenEd_ePortfolio/HomePage.html

    Bonjour
    The notebook image was too high. You had to lower it (15 pixels down).
    I see you changed your template. An advice : use only one template for all the pages of your website

  • Iweb page not working in Safari

    I have just created a website - yellowcobblestones.com using iweb it works perfectly in both firefox and IE but not safari.
    The main problem is the tabs located at the top of the page do not work
    Thanks

    The work OK for me in Safari V 5.1.1. Try emptying the cache and visit the site again.

  • Tab not working on ALV report output in Persona

    In normal SAP GUI we can move the cursor position on ALV report output between different column by pressing TAB on keyboard. But in case of persona 2.00, TAB doesn't work and we have to click on each cell of the report output whatever we want to highlight. Is there any settings or SAP note we can implement to so TAB will work on persona.
    Thanks,
    harkamal

    Hi Devendra Singh,
    I think it's not possible to show all field values in another Language (Eg Thai) But it's possible if it's short Text, Long Text etc
    SE63 and follow menu
    Translation
    ABAP Objects
    Short Text / Long Text Etc..
    AND
    Translation
    NON ABAP Objects
    For that also you have to maintain it first in SE63..
    [SAP Help1|http://help.sap.com/erp2005_ehp_04/helpdata/EN/77/5719d2492011d1894a0000e829fbbd/frameset.htm]
    [SAP Help2|http://help.sap.com/erp2005_ehp_04/helpdata/EN/b4/54601d77f38e429ffad9e3e11c1b25/frameset.htm]
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7
    ilesh Nandaniya

  • Some Tabs Not Working in System Preferences

    Mac Pro E2008 14Gb/2Tb.  Installed Mavericks over OS X 10.8.4 with no problems.  Was having some problems with selected fonts not showing up in Pages 5.0.  Ran some font diagnostic software, which isolated some problem fonts.  Subsequent to this I noticed that some Tabs do not work in some preference panes.  In particualr, tha advanced tab in Security and Privacy does not work and the advanced tab does not work in Network Preference pane.  Neither does the + tab in that pane but the - does.  Also cannot edit the three locations that I have in my system.
    Found that all is restored when logged into the root account and also into a Maintainence admin account.  I also ascertained that in my faulty account, after taking out the login items plist and starting with no login items, the fault was still there.  Similarly booting into safe mode did not restore the faulty tabs.  I ran font book and deleted all questionable fonts and moved all the user fonts to the /library/fonts folder.  After each action I restarted rather than logging out.  I have tried deleting the systemuiserver.plist and removing the relevant network plists from the user/library/preferences folder.  I have also removed the com.appl.network.eapoiclient.plist and com.apple.systempreferences.plist.  I have also made invisible files visible and gone through the whole system folder/library folder and ~/library folder and deleted old preferences and obsolete files back to 2004 with the result that my system now loads very much quicker, which is an obvious bonus.  However, the problem still remains and is obviously something to do with the main user account.  If I go into root or my maintainence account, I can change or edit some settings which "stick" when I log back into my main account.  I have carried out the mail and iBook update in the mean time which has not changed anything.
    I have also ran diskwarrior and corrected the disk directory, repaired permissions, reset ACL's and emptied various caches using tinker tool system and mavericks cache cleaner.  I have I think very thoroughly inspected the library and ~/Library folders.
    So, synopsis  (1) Definitely the main account.  (2) No logins or safeboot are not the culprits. 
    Whilst not earth shattering and hopefully 10.9.1 may solve the problem, I would be very grateful if anyone could add any further possible problem areas to look at or suggest possible further solutions. 
    <Email Edited By Host>

    Hey there, sounds like you've done a lot of the groundwork already although it's not entirely clear what about the preference panes aren't working. There is further isolation that could be performed however if the issue is isolated to your user account as you mentioned then renaming the home folder library preferences, logging out and back in (preventing login items if any) and testing may give you the results you are looking for. If that works I would copy the files from the renamed Preferences folder *not replacing* existing files when prompted (of course if it doesn't work replace the existing Preferences folder with the original renamed Preferences entirely). The same type of troubleshooting also applies to the user library itself however please be careful about launching apps after renaming the ~/library or the contained prefs folder and before copying unaffected plists and/or supporting files back as unexpected results may follow (i.e. lost or missing data). Also if you are eligible for support (which you almost certainly are as you have very recently installed a new OS) I'm sure Applecare may help find a solution.

  • SQL tab not working in V2.1 EA1 for non-DBA users -- how to fix?

    In v2.1 EA 1 the tab to show the SQL script (DDL) in the object browser is not working for non-DBA users. In the prior version, these users would see a message about DBMS_METADATA and then the message would indicate that an "internal generator" would be used to generate the DDL script. After that brief message the DDL would show up as expected. This doesn't seem to be the case in the newest version.
    I issued the following two grants to a particular user which worked, but I am reluctant to issue the grants to "PUBLIC".
    SQL> grant execute on DBMS_METADATA to XXXXX;
    SQL> grant select_catalog_role to XXXXX;
    So, my questions are:
    1) Will the old functionality (that didn't require these privileges) be added to V2 at some point?
    2) What security implications are there for issueing the above grants to PUBLIC?
    NOTE: After granting execute on the DBMS_METADATA package, it still didn't work. I left that grant in place and granted SELECT_CATAOG_ROLE, so I can't say for sure that the 1st grant was required.
    Edited by: user615070 on Nov 19, 2009 9:30 AM
    Edited by: user615070 on Nov 19, 2009 10:06 AM

    An OEM account is separate from the database account. You need to use OEM UI to create an OEM account, however, for certain tasks to be done in the databases which OEM is monitoring they will also require separate database accounts within those databases. For example, to view the performance tab in OEM UI, a database account is required.
    OEM only has two types of users, i.e. Super Administrator and Administrator, but don't go by the names. You can grant an OEM 'Administrator' account access to specific targets and what they can do within OEM, such as only viewing reports, targets, and so on. For access within a database, the user created need not be a DBA either.
    I hope you understand.

  • Hyperlink to iWeb Page not working

    I have created an iWeb page. I have a hyperlink to the page on a document. The hyperlink takes me to a mobile me error page ie "We can't find the page you requested. Please make sure the URL is spelled and capitalized correctly, and try again."
    Yet if I copy and paste the exact same url I have entered in the hyperlink filed into the address bar on Safari it goes to the right page no problems.
    Any ideas please?

    Is that the page you're trying to link to in the PDF document?
    I was able to place a hyperlink in an rtfd text file and and Word 2008 document to your web page that works. The link in the Word document takes about 5 to 7 seconds to get to Safari and open the Page. The rtfd document, created with Bean
    Bean, a great, free word processor, opens the page in Safari almost immediately.
    In Work I used the Insert ➙ Hyperlink menu option and entered the URL of you page and the text to use as the link. For the Bean document I clicked and dragged the link title at the top of your web page onto the Bean page and saved as a rtfd formatted file. If the page is saved as a plain text document the hyperlink is lost.
    Click to view full size
    If I do a Print ➙ PDF ➙ Save as PDF from Bean I get a working link in the resulting PDF file. But with Word the link does not work.

  • Spry tab not working correctly after custom changes

    Hi,
    i have used Spry Widget for making tabs in Dreamweaver for one of my project. i have customize these tabs. every thing was working fine until i add the horizontal scrolling to tab by jquery. tabs are not working correctly they do not show the tab content. i am sure there is some linking issue. all this problem begin when i added a addition div within the spry div tags if i remove <div style="overflow: hidden;" class="sc_menu" > every thing start working fine but this div control the scrolling and its important to put there. please can any one guide me what i am doing wrong i have uploaded the project to my server. below is the zip file link to download.
    http://khurram.visbl.com/test.zip
    please let me know if someone having problem in downloading above zip file. also waiting to find a solution for above. hope anyone is here who knows the solution 
    Best - Khurram

    Sorry to disappoint, the structure of the tabbed panels is
    <div id="TabbedPanels1" class="TabbedPanels">
      <ul class="TabbedPanelsTabGroup">
        <li class="TabbedPanelsTab" tabindex="0">Tab 1</li>
        <li class="TabbedPanelsTab" tabindex="0">Tab 2</li>
      </ul>
      <div class="TabbedPanelsContentGroup">
        <div class="TabbedPanelsContent">Content 1</div>
        <div class="TabbedPanelsContent">Content 2</div>
      </div>
    </div>
    As soon as you change that structure, this widget (out-of-the-box) will not work.
    Gramps

  • ShIft caps lock tab not workIng correctly

    My keyboard has started to behave strangely.
    The left shIft key dIsplays an I.
    The caps lock key does nothIng and doesnt lIght up. tab does not work. If I type I and n together It becomes IN. enter key goes back to begINnINg of sentance. typINg thIs Is very dIffIcult as nothINg Is doINg what I want It too. any help would be greatly apprecIated.

    Hey,
    Sorry to hear about the keyboard problem.
    In a post a while back had this to say.  He makes a suggestion that the keyboard might need to be replaced, then the person with the question tried something else.  You might take a look and see if there's something there that will help.
    Thanks for coming to the forum.
    Hope I helped,
    GeorgeFN
    I work on behalf of HP.

Maybe you are looking for