IWeb - Text disappears in iFrame with movie and text!?

I have an iFrame in one of my pages that works to give the functionality of a submenu.
This submenu is contained in the "Music" page shown in the top menu. The iFrame is for dynamically loading the content of the different "subpages" when clicking on the submenu items. Because Film Music is the first (and default) item of my submenu, this is what comes up when you select "Music" in the top menu:
In this case, everything from the big Film Music title and below is what is contained in the iFrame. That is the content that gets changed when selecting the other submenu options (TV Music, Records and Advertising Music).
Here's the problem:
When clicking "Music" on the top menu, this default submenu page (the one shown above) never breaks. However! Once I start navigating through the submenu options (e.g. TV Music, Records, etc...) any page that loads in the iFrame that has both video and text (like this Film Music one) becomes unreliable! Sometimes it shows up fine, and others, the text from the iFrame disappears! The video stays there.
I magically found out that if I scroll the page, the text comes back. The only thing getting affected is the content of the source page that gets loaded in the iFrame. Why is this happening??

When clicking "Music" on the top menu, this default submenu page (the one shown above) never breaks. However! Once I start navigating through the submenu options (e.g. TV Music, Records, etc...) any page that loads in the iFrame that has both video and text (like this Film Music one) becomes unreliable! Sometimes it shows up fine, and others, the text from the iFrame disappears! The video stays there.
I magically found out that if I scroll the page, the text comes back. The only thing getting affected is the content of the source page that gets loaded in the iFrame. Why is this happening??
I read it in your other post. Must have missed it.
I noticed the same problem in my iframe page.
I think it's some Safari issue.

Similar Messages

Creating a iMovie with movies and slideshows

I am going to be creating a farewell DVD for some friends. I would like to have both slideshows from various events along with movies from these same events play on the DVD.
If I'm thinking correctly, I basically want to create slideshows from the various events and then insert those into the iMovie around the movies of the same event.
Can someone tell me if I'm heading the right direction? I have two weeks to do this, but I'd like to make sure I'm heading down the right road, or if there's a better way to do it, I would like to know.
Also, what is the best way to insert audio (music) into the slide show part? Is this done in iMovie or iPhoto?
Thanks!

Add the music in iMovie.
There are many ways to produce slide shows using iPhoto (see this: http://support.apple.com/kb/PH2423 ), iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
http://www.lqgraphics.com/software/phototomovie.php
(Other users here use the alternative FotoMagico: http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast, for burning.
You will be pleasantly surprised at how professional the results can be!
To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
http://support.apple.com/kb/HT1089
Preparing images for iDVD slideshows:
http://support.apple.com/kb/PH5452

I just updated itunes and a LOT of my movies and music disappeared. These are movies and music I owned already and did not purchase from iTunes. How do I find them or do I need to add them all again? Also what happened to the sidebar?

I just updated my iTunes software and have a lot of problems...
1. The sidebar option is gone. I LIKED the sidebar and it was easier for me to navigate that way.
2. Also no lists? I hate the icon way to view it. It makes my eyes go wonky and I have a harder time actually looking for what I want.
3. A LOT of my music and movies have disappeared. These are music and movies I owned that I did NOT purchase from iTunes so I can not re-download them.
How do I find the missing files? Do I have to readd them into iTunes? Is there a way I am not seeing to put thew sidebar back or make the files be viewed in list form? Can I undo this update to put it back the way it was. I hate this update...

See my answere to your post in the Mt. Lion forum.

Any "3rd" party program for making DVD's with movies and stills....???

I think I have read every post on this or other sites about maximizing burned DVD quality after using imovie. At the end of the day I can only say this. I used proshowgold on my PC and the DVD's that were burned had MUCH better quality pictures and video. The DVD when shown on a TV was much more vivid. I did not have to lace/deinterlace/h.264/mv2/upscale/drag.. etc.etc.... you get the point. I love the mac but I want to make a movie with stills and music, hit "burn" or move to iDVD and have a decent DVD to give to friends.
I looked at FCE but that didn't seem to be the answer for movies and stills.. ?? Anything else out there...???
Any help other than "your doing it wrong" is appreciated....

As Shawn said they keep on changing things around
In an older version it looked like this [link to image|http://dvdstepbystep.com/toast.jpg]
Click on New disc on the bottom, name the disc and drag the AUDIO_TS and VIDEO_TS File in
You can also [use this|http://www.kenstone.net/fcphomepage/image_to_diskstone.html] to make a .img from iDVD and DVD SP then burn to disc....

DVD project with movie and additional files on same disk?

Hi-
Dell 9200 (aka XPS 410), WinXP Pro SP2, Encore 2.0.
I have a DVD project that I am assembling and need to include different types of files on the same DVD. I have an educational movie that is already formatted on a stand-alone DVD (just like one you would rent from Blockbuster). It needs to go onto a DVD along with some additional supporting files in .pdf and .txt file formats. The DVD has to be able to autostart and play on both a home TV/DVD setup as well as a computer. Users also need to be able to access the additional .pdf and .txt files if it is viewed on a computer. Can these two viewing arrangements co-exist on one DVD? Seems to me that it would all work fine if I converted the stand-alone DVD movie into a something like a Quicktime or Windows Media file, created a XHTML file that can be used as an autostart menu, and then link the movie, .pdf and .txt files from there. All of this can then be burned onto one DVD that can be viewed on a computer, but I assume it would NOT be able to be viewed on a TV/DVD home setup. On the other hand, If I created a DVD using Encore I could just make an autostart screen with menu, but I don't think the menu would suppport something like linking to the .pdf and .txt documents (not that they could be viewed on a home TV/DVD setup anyway.
So, am I looking at having to make two separate DVDs--one with the movie and one with the additional .pdf and .txt materials? Would this have to go onto a dual-sided DVD? One side with the movie and one side with the additional materials? Would it be best to just convert the movie and stick all the files on one DVD? (Even though my boss hates this idea because it will reduce the quality of the current DVD movie).
Any suggestions would be greatly appreciated.
-=Scott

eDVD is one option. It uses the Interactual Player to link to your extra content directly from the DVD material. Your other option is just to create your own separate content for use on computers. DVD players only pay attention to the VIDEO_TS folder, which must be in the root directory. If you also have an autorun.inf in the root directory, Windows-based systems will follow the instructions there rather than treating the disc as a DVD-Video disc. So you could use an autorun.inf to launch whatever you want to play on the computer (Director projector, other executable, etc.). You can add that extra stuff to the DVD either by using the "ROM Content" feature in Encore or by building to a folder and then burning your disc with other burning software (be sure to use the UDF filesystem or it won't work in DVD players).
Notes:
1. Mac computers will still launch whatever application is set to handle DVD-Video discs in the System Preferences (usually the Apple DVD player).
2. If computer users need to view the DVD-Video content, you will need to give them some help in doing that. (i.e. instructions to manually launch their software DVD player, linking directly to the DVD-Video content from your Director project, providing a separate copy of the video, etc.)
3. eDVD's effectiveness is diminished by the fact that it requires installation of the Interactual player. If the user is unwilling/unable to install software on their computer, such as many corporate/educational users, they will be unable to take advantage of the eDVD features.

Need DVD with movie and interative quiz...how?

I'm getting frustrated. I already have iMovie, iDVD, Final Cut Express. I already made educational dvds and it worked beautifually. However, now I want to create a interactive quiz at the end of the movie and can play in stand alone DVD player with the movie. I want to create several mulitple choice questions with the movie and if they pick the correct one, it will go to the next question, if picked the wrong question, it will go back and replay to help them review and study. Is there a way can do it with my current program or do I need another program that is currently available somewhere? I tried to google "interactive quiz in DVD" and not seem to get a clear cut answer. thank you for anyone who is able to assist me.

You might be able to do a real simple version of this in iDVD, but everytime you attempted to loop back to a previously seen video, you would need a new instance of that video on the DVD. Clearly not optimal and limits what you can do.
Apple used to make a product called DVD Studio Pro. It came bundled with Final Cut Studio (Final Cut Pro Version 7). It would do this. Apple no longer sells this product but you might be able to find some copies of Final Cut Studio on Amazon or eBay. To see DVD Studio Pro in action, see this podcast of MacBreak Studio with the guy from BoxWrench. http://www.pixelcorps.tv/macbreak18
Adobe Encore CS5 is a currently supported professional DVD authoring software. I have no personal experience with it so I do not know if it will do what you need.

Garageband video podcast shows up with a QT logo ? in Safari, and nothing in Firefox. Tried with .mov and m4v. Looked at a lot of discussions and no answers.

Went from iMovie 11, then to Garage band, made the podcast, then went to iweb. Uploaded and nothing in firefox, and in Safari I get the good old quicktime logo with a ?. Tried the put the movie in a textbox trick. No dice. I don't understand code. I just use the darn thing and can usually figure things out by looking at discussions but I'm coming up flat on this one. Have used iweb for three or four years. This "should" work but can't get it to work, have tried switching out the podcast with different formats and nothing. Any ideas are appreciated. 10.6.8

The first thing you should do is clean up the movie file name by taking out the space and the apostrophe. Never use spaces or special characters in any file name that is going to be uploaded to the server.
Change this...
Chiro%20Works%21.m4v
... by taking out the ! and replacing the space with a hyphen to this...
Chiro-Works.m4v

IDVD crashed folder with movie and project gone/invisible

I just created a movie with iMovie 6 and had it saved on an external Firewire drive, then I exported to iDVD 8, again saving the project to the externa drive and same folder, then as I was adding media to the menus iDVD suddenly quit. I navigated to the external drive in the finder, and the folder is gone!
When trying to open/save a project from iMovie or iDVD, the folder name shows up with a blank rectangle icon, but there's no directory.
Any ideas on how I can restore the folder?

Disk Utility and Repair Disk restored the folder and all it's content - from now on, I'll put my iDVD projects in a separate folder!

HT202157 subtitles appear on screen with movies and i cannot remove. Help? Version 1 TV so this may be outdated

Subtitles appear on the TV screen when watching a downloaded movie from apple TV (Version 1) Cannot remove. Any advice?

What is the output of:
ls -l /etc/systemd/system/multi-user.target.wants
netctl-auto cannot be used with explicitly enabled profiles (ie, those for which you have used `netctl enable <profile>`).

HT3209 Help with Movies and Ipod Nano

Can an SD movie download to an Ipod Nano?

I have to disagree, for some reason 1 out 5 movies i have purchased through itunes have been able to be uploaded to our Ipod Nano. Don't understand why, have tried to file convert through choose file, create new version, but that option won't highlight. Still looking for help

Big Blunder with movies in iPhoto '08 and web galleries

I've just upgraded to iLife '08 and found a REALLY BIG BLUNDER in the use of movies with iPhoto and the web gallery. As it is, the new 10GB limit won't be enough for diddly squat of movie hosting.
I've got a Canon A640 that saves to .JPG and .AVI formats. iPhoto opens a gallery with them just fine.
But .AVI movies take up ~50MB per minute of video. A 2 minute movie I made is about 100 MB, while a 9 minute movie is 550MB in size. So while it's fine to view them on your desktop, you do NOT want to upload them!
However, iPhoto has no ability to convert .AVIs to any other formats.
I went into iMovie and manually selected each .AVI clip and Exported it as "medium" to my local drive. Ok, this gets you a .m4v file that's much more workable.
Going back to iPhoto ... uh, gee, "iPhoto cannot recognize that file format".
The new iMovie can export exactly ONE format -- .m4v -- and iPhoto thinks it's an iTunes file and won't work with it. Thanks a lot guys. What movie format IS iPhoto expecting to use, exactly?
I went over to the Apple store and presented my dilemma to one of the geniuses there, and the ONLY solution he could recommend was to get a license for Quicktime Pro and use it to do the conversion to .MP4. But, even then, iPhoto won't recognize .MP4 files in your folder. You have to explicitly import them. Again, iPhoto seems to like movies, but ... in what formats?
As an aside, MP4 files are smaller than M4V files, but the additional compression takes quite a toll on the image quality.
I filled up two 4GB SD chips with a couple dozen photos and several movies. The way iPhoto works right now, the only way to get these movies onto a .Mac gallery is to upload them directly, which is NOT a good idea! They take up an ENORMOUS amount of disk space, take FOREVER to upload, and I doubt users will find it very fun waiting for a 500MB download to view them (which download will take longer than the length of the video being viewed).
iPhoto needs a way to recognize .AVI files and STRONGLY discourage you from uploading them -- offering instead to convert them to something more useful, like .M4V format, WITHOUT having to swith over to iMovie or use Quicktime or some other program to do the conversion.
It also needs a way to tell it to handle other movie file format besides .AVI files.
Thanks
-David

Errrr.... you guys are totally missing the point.
Apple sells little Canon cameras, and they have them sitting right next to just about every Mac in the store. Ever noticed them? Maybe you own one? (I suspect not because you probably would have noticed this already if you did.)
These Canon cameras take two types of images: stills are .JPGs and movies are .AVIs. Got that?
JPGs are compressed and "ready to use".
AVIs are UN-compressed and NOT "ready to use". You can play them locally and they look fine. But there's not much to tell you they're HUGE FILES. When I say "huge", I'm taling 50 MEGA-BYTES PER MINUTE huge. That means a measley 2 minute clip is 100 MEGA-BYTES in size. OK? Now, what's the download rate on your iPhone? How long will it take you to view a 2-minute AVI file? But, surely, nobody is dumb enough to load them onto their Web Gallery, right? Keep on reading.
See, when you connect the camera to the computer, most people have their system set to open something like iPhoto or Aperture when the camera is connected. Agreed? (Maybe YOU don't, but LOTS of people DO.)
Notice that you can choose to have iMovie or Final Cut Pro or something else launch when you plug the camera in as well. It's up to you. Most people launch iPhoto - or Aperture if they've got it.
It so happens that iPhoto '08 loads in in BOTH sets of files. Why in the world iPhoto is happy reading in AVI files is beyond me, considering it won't recognize M4V files and has to be slapped to get it to take MP4 files. But it happily reads AVI files with no problem.
Now, if you've got your iPhoto set to AUTOMATICALLY SYNCHRONIZE with your WEB GALLERY, what happens?
Well, if you're like me and you filled two 4-GIGA-BYTE Flash cards with movies, and iPhoto launches (like when you plug the camera or flash memory into the computer) and starts to SYNCHRONIZE with your WEB GALLERY, what's gonna happen?
Did you actually TELL it to upload those files? NOPE! But it DID!
Several HOURS LATER your computer will finish UPLOADING 8 GIGA-BYTES of MOVIES to your WEB GALLERY! And if you interrupt it, well, it'll happily start over when you turn the computer back on again.
That's really nice since .Mac now has a 10 GByte limit. Two and a half 4-GB flash cards will fill up your .Mac account if you shoot movies with your Canon camera, have iPhoto set to launch when you attach your camera, and/or have it set to automatically synchronize with your web gallery.
All I'm saying is that if iPhoto is going to work with movie files, it should NOT blindly upload AVI files, NO WAY. I'd much prefer it if it would let you apply some kind of compression to them, eg., turn them into MP2 files. (MOV files are even bigger than AVI files, from what I can tell.)
We're not talking about what you THINK about doing. We're talking about the DEFAULT BEHAVIOR of the program for a VERY COMMON SCENARIO -- that you don't HAVE to think about.
So it's very possible that while you're happily editing your AVI movies in iMovie or Final Cut, iPhoto is happily sitting in the background uploading the same files to your Web Gallery. And you are clueless.
Is that making sense now?

IFrame with code for video doesn't load in iWeb but works in Safari?

I've got a strange problem... I have encoded several videos using H.264 as .mov files and then import them into a flash file. Flash 10 plays these files just fine. However, when I put this on an iWeb page using an iFrame the video never loads. If I go ahead and publish the pages I can open the pages with Safari and see the videos just fine. Why won't iWeb loads these videos so I at least see a preview of the first frame? Instead, the Flash skin progress bar just keeps running and never stops. The path is valid obviously since the actual pages work when viewed with Safari.
Here is the code I'm using in the HTML snippet:
<IFRAME SRC = "http://xxxxxxx.xxxx.net/FLASH/PL2009/PL2009.html" WIDTH="320px" HEIGHT="280px" FRAMEBORDER="0" --if "0" no border, otherwise "1" with border MARGINWIDTH ="0px" MARGINHEIGHT="0px" SCROLLING="no" --"no" no scrolling bar, "yes" show always, "auto" showed when need > Your browser does not support IFRAME </IFRAME>

Wouldn't that lose the skin etc?
One interesting thing I just tried is that I renamed the H.264.mov file so it had a .flv extension. I then went to Flash CS4 and opened the Flash document and re-linked to the .flv file and then re-published it. I then FTP'd all of the published files to my host and then went to iWeb. I clicked on the existing container and then clicked "Apply". Low and behold the movie loaded just fine!
So, I'm left to assume that iWeb cannot load H.264.mov files via an iFRAME unless you change the extension. Like I said, everything actually worked on the web site it's just that iWeb didn't load the video and it was annoying to see the buffer bar in a continuos update mode.
So what are your thoughts on this? Thanks!
Message was edited by: Bruce Carillon1
Message was edited by: Bruce Carillon1
Message was edited by: Bruce Carillon1

Why is Photoshop CC 2014 nearly crash with Wacom and fix itself when I move my regular mouse?

I have Photoshop CC 2014 (completely updated through Creative Cloud). I am currently using a Wacom Intuos 3 9"X12" with the Intuos drivers all updated. Everything is updated. I am working on Windows 8, on a computer with 8 GB's of RAM. I have never had this problem before using Photoshop until just recently. Before I updated Photoshop CC 2014, I was having trouble putting in text into my files. I would go to edit or add text, and it would say that the text function was unavailable. I was pretty ticked, since I'm in school full time for animation and NEED Photoshop to work as fast as possible and this was making things harder. So, I updated. The text thing got fixed, but for some reason, whenever I use my wacom tablet to draw, it will work for a little bit (like two minutes) before it pretty much freezes my computer. It gets laggy and doesn't show anything on screen. I have waited almost two minutes before. But, whenever I move my REGULAR mouse (trackpad or USB mouse) it catches up with what just happened (including going from layer to layer if I clicked on those to get things moving). It makes it REALLY hard to work with this, and it's increased my worktime by at LEAST 45%, since I have to constantly fix this with a move of my regular mouse. During that time, I cannot click on anything with my wacom pen or use the hotkeys on the keyboard (the default ones).
It, so far, doesn't seem that Photoshop CC has it, but I cannot update to that version. I always get to 75% or something REALLY fast, and then it says there was an error. I just don't know what's going ON with my programs. Do I have to uninstall and reinstall or something? My computer is set to optimize weekly, and I've done multiple scans to make sure I don't have a virus or something. Everything in clean, and I'm not overloaded on stuff, either. I usually only have two or three programs total open, Photoshop CC 2014 included. It ends up either being Photoshop and Firefox or Photoshop, Firefox, and iTunes to listen to music. I use a second monitor, as well, to make my flow go faster.
Help ASAP would be VERY much appreciated! Thanks in advance!

I have Photoshop CC 2014 (completely updated through Creative Cloud). I am currently using a Wacom Intuos 3 9"X12" with the Intuos drivers all updated. Everything is updated. I am working on Windows 8, on a computer with 8 GB's of RAM. I have never had this problem before using Photoshop until just recently. Before I updated Photoshop CC 2014, I was having trouble putting in text into my files. I would go to edit or add text, and it would say that the text function was unavailable. I was pretty ticked, since I'm in school full time for animation and NEED Photoshop to work as fast as possible and this was making things harder. So, I updated. The text thing got fixed, but for some reason, whenever I use my wacom tablet to draw, it will work for a little bit (like two minutes) before it pretty much freezes my computer. It gets laggy and doesn't show anything on screen. I have waited almost two minutes before. But, whenever I move my REGULAR mouse (trackpad or USB mouse) it catches up with what just happened (including going from layer to layer if I clicked on those to get things moving). It makes it REALLY hard to work with this, and it's increased my worktime by at LEAST 45%, since I have to constantly fix this with a move of my regular mouse. During that time, I cannot click on anything with my wacom pen or use the hotkeys on the keyboard (the default ones).
It, so far, doesn't seem that Photoshop CC has it, but I cannot update to that version. I always get to 75% or something REALLY fast, and then it says there was an error. I just don't know what's going ON with my programs. Do I have to uninstall and reinstall or something? My computer is set to optimize weekly, and I've done multiple scans to make sure I don't have a virus or something. Everything in clean, and I'm not overloaded on stuff, either. I usually only have two or three programs total open, Photoshop CC 2014 included. It ends up either being Photoshop and Firefox or Photoshop, Firefox, and iTunes to listen to music. I use a second monitor, as well, to make my flow go faster.
Help ASAP would be VERY much appreciated! Thanks in advance!

I have noticed an issue with utilizing the "stream" function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clea

I have noticed an issue with utilizing the “stream” function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clearly see that storage has been reduced under the usage, yet under the “videos” tab it still states “No Data” the only way to delete what you have partially downloaded is to fully download the video, which is fine but there is no way to tell what videos have been partially downloaded (I.e which occurs a lot when your child switches between movies using the so called “stream” function). This becomes troublesome once the capacity of the ipad is almost met and you have no way to delete this data since you may have several videos that have started to be viewed (hence partially downloaded). Apple needs to somehow make it truly streaming or provide an update so the storage can be managed. The only way I have been able to remove partially downloaded videos is by doing a total software restore. (The video data that is in question when connected to my MacBook shows up in iTunes as “other”) if you have any insight into this issue it would be greatly appreciated. Thanks.

Here are the screenshots for what it's worth.
Not sure why I can't post them in the original post.<br>
<sub><b>Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]</b></sub>
'''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
'''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

Entourage Tasks and iCal "To dos" have disappeared during sync with .Mac

All of my “tasks” (both completed and incomplete) in Entourage and "to dos" iCal have disappeared, apparently during a sync with dot Mac. This problem has happened twice in the past two weeks (the first time I lost all of my Entourage “notes” too, but I haven’t put any back).
The tasks show no problems for a week and then all of a sudden disappear from both Entourage and iCal. My calendar and address book (which I also sync) seem not to be affected. Entourage doesn’t seem to offer a way to sync the calendar without syncing the tasks as well.
Here are my questions:
Why did my tasks disappear?
How do I prevent their disappearance again?
has anyone else experienced this problem?
My Entourage database is fine. I’m running Entourage 11.2.3 (which rencently added a feature "sync services" that allows syncing with .Mac and iCal).

I had the same problem and I got my To Dos to appear when I clicked on the To Dos by Priority column header and checked/unchecked the Hide Items outside Calendar View option. (Doesn't seem to make any difference whether it is checked or unchecked ... it displays all of the items ... at least until restart iCal ... then it is a bit unpredictable.)
I also have intermittent problems when I create or change a new Event. Sometimes the change does not appear until I move off the page that I am displaying and come back (e.g. move forward a week in week view and then back.)

IWeb - Text disappears in iFrame with movie and text!?

Similar Messages

Maybe you are looking for