IWeb username and password problem

I've published a few sites now using iWeb, and just ran into this problem for the first time. The site I'm working on when published now asks for my apple username and password (my apple email address and apple password, for itunes etc etc) instead of the username and password I enter in iweb for password protecting the site. It says something like 'the username and password for your mobile me domain is incorrect. and when I put in my email address and apple password, it works. All my other sites that I set individual usernames and passwords for are working fine.
Anyone know why it would be doing this? I did copy the pages from another site. could that be part of the problem?

Have you found a good solution to your problem yet? I had an issue like you describe, where I thought I had to enter my MobileMe user/pass when prompted when browsing.
The issue with passwords that I saw was when creating more than one site within a single domain.sites file. I have one public site without a password, and then the other several sites in this file do have passwords, and each of them has a different password. With this multi-site and multi-password configuration, I was confused why the passwords seemed to NOT be working.
The result seems to be that the LAST site published is the user/pass used for ALL of the password protected sites. So right now, after editing a page in one of my private sites, I publish that site, and then I ALSO re-publish the site with the password that I want. This way at least I know the password being used. But it's a single password used for ALL the private sites.

Similar Messages

Username and password problems with CS3

I have Dreamweaver CS3 Version 9.0 Build 3481
When I close Dreamweaver and reopen it I lose any usernames
and passwords for FTP.
How do I solve this? The 8.0.2. Updater does not work for my
version.
Thank you

Adobe got back to me and gave me some info I'll share that
might help others who have this problem. YES the fix did work for
me, I'm running Dreamweaver 9 or the CS3 version and was losing
user name and password each time I re-opened the program.
You can find the fix at
http://kb.adobe.com/selfservice/viewContent.do?externalId=3491671c&sliceId=2
Basically it's a registry fix, appears when you have Explorer
7.0 installed.
Warning: Editing the Windows Registry incorrectly can cause
serious problems that may require reinstalling your operating
system. Adobe does not guarantee that problems caused by editing
the registry incorrectly can be resolved. Edit the registry at your
own risk.
1. Launch the Registry Editor by clicking the Start button,
choose Run, then type "regedit". In the Registry Editor, navigate
to this folder:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\
Explorer\User Shell Folders\
2. See if there is a key called AppData.
# Backup the Users Shell Folders registry branch as follows:
1. Right-click the Users Shell Folders folder and select
"Export".
2. In the "Export range" section, choose "Selected branch".
3. Save the .reg file to the desktop.
4. If problems occur after editing the registry,
double-clicking the .reg file will re-install that registry branch.
# If the AppData key is missing, then perform the following
steps. If the AppData key exists, then skip to Step 5.
1. On the right side of the Registry Editor explorer pane,
right-click in a blank area anywhere under the last key in the
list. You should get a context menu that says "New" with a flyout
menu.
2. In the flyout menu, select "Expandable String Value" and
name the new key AppData.
# Right-click the new AppData key (or the existing one if it
was already there), select Modify, and enter the following in the
Value Data field: %USERPROFILE%\Application Data. If the values for
the other keys in your User Shell Folders directory don't start
with %USERPROFILE%, then use the value that your other keys use.
For example, if your Local Settings key has a value of u:\Local
Settings, then try usingu:\Application Data.
# Open Dreamweaver, re-enter the FTP login information for
one of your sites, and see if the FTP login is now saved when you
close and re-open Dreamweaver.
Worked for me.
Thanks Adobe

Web service username and password problems

Hi,
I am trying to create a client to consume webservices exposed on a secure .net platform that is SSL protected (https).
I am using netbeans 6 with WSIT support. When I create the web service and add the WSDL file - it comes up with the certificate that I then approve, but then just displays a IO Exception. When I access the WSDL through a browser, it requests a username and password (which I supply) and it works fine.
I've tried on Netbeans 5.5 but with no luck - it asks for a username and password (at least) but doesn't accept them.
How can I connect to an https web service that requires a LDAP username and password?
Thanks,
Brendan

I'm guessing that you are trying to call an EBS API and are using FND_WEB_SEC to test that the user account is valid in FND_USER first before executing the API call. In that instance, you'll likely need to use the Oracle Applications Adapter for EBS if you want to authenticate the user through FND_USER.
If you've not purchased that adapter, you could use a simple BPEL process, with a regular database adapter to firstly call the FND_WEB_SEC package to authenticate. Pass the response from eBS into a bpel variable, add a bpel switch based on the outcome of that variable either execute the API call or throw an authentication error if the call failed.
You can wrap all this up into one web service that then calls this bpel process, taking the username and password as as input parameters.
Phil

Username and Password Problems accessing site

Yesterday I created a blog using iWeb 09 and published it and went with the option that visitors needed to have the user name and password to access the site. Friends and family reported that these wern't accepted and I had the same problem when I tried. Publishing and accessing using mobile me by the way. Removing the password UN option removed the problem. I have installed the latest update to the iLife 09 suite. This problem occurred to those using both mac and windows. Is this a bug?

Make your site private and add a username and pw, then publish your site. You will get a popup when it is done publishing which gives you the option to announce your site. If you choose that option the user name and pw will be sent to those you choose. If you opt to have people visit your site, they will need the username and pw that you made youe site private with. Hope that helps.
Smokenaxs

Username and Password problem when trying to conne...

I decided to try and connect to a BT Wifi hotspot for the first time the other day, but when i enter my primary bt usename and password it says that the username and/or password is incorrect. I know they are the correct ones as i can log into the bt wifi website from my pc at home and it confirms that i have infinity 2, am opted in to the wifi scheme, and shows that i havent used any minutes yet.
I have tested this by connecting to the wifi hotspot that my own router puts out as a test, but it gives the same error.
I was wondering whether it may be because i have been with BT for quite a while and my primary email is an @btopenworld address which is causing some issues?
Thanks in advance for any suggestions.
Solved!
Go to Solution.

You've probably answered your own question. BT Wifi will only accept btinternet.com email addresses from BT Total Broadband customers; no problem though as the domain name is interchangeable with btopenworld. (In fact to access BT Wifi you only need to enter your user name and can omit "@domain".)
You can click the white star next to this message if you think it was helpful.

Username and password problem

New to apex with new install
Successful install of apex --- verified logs
Completed all of the post install tasks 4.1 thru 4.2 of the read me file with success
Unable to log on to
http://host:port/apex/apex_admin
http://host:port/apex
Receive unauthorized with all username/password attempts
4.8.2 of readme states a declared password --- I did not declare any password for apex
Please assist

Thanks for the reply
I don't recall providing a password for apex at any time. This is put on a fresh install of
Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows on a Windows XP box
The db is accessible and up and running. The install log from apex provided no errors and provided the message
Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the FLOWS_030000 schema.
Not sure where to go from here --- new to apex
Any assistance would be helpful

Username and password problems

All data appears To be correct. Mail appears at log on despite statement that password/username is wrong. What can be done.

You have told us "all data appears to be correct, but you haven't told us what you are trying to do but are not having any success with.
Mail appears at log on. Where?
"What can be done" .... About what? You can't get mail? You can't send mail? Both?
Are you in the correct discussion forum? Using iPad?

Problem with iWeb asking for username and password to access my public site

Today for some reason anyone trying to access my site is being asked for username and password. I have made no changes that would require a password. My site has always been public.

I am having the same problems. My site is public, I checked the settings on the public folder on MobileMe to ensure that it was public and did not require password protection either. But for some odd reason, even though I didn't change anything, my site's pages seem to require a user name and password to get into them. If one continues to click cancel, the page continues to load.
This does not happen every single time, but it happens more often than not. I have tried this with my iMac, Macbook, as well as my iPod Touch, and I get this on all machines. My brother has tried logging in from another location using his Macbook Pro, and he gets the password prompt as well.
I tried turning on password protection to the site and uploading the changes, then disabling password protection and reupping the changes once again. I've tried uploading entire site, instead of just changes, but the problem continues to persist. I definitely need this issue solved since this site is important to me.
The site url is: http://www.globalwinetour.com
Does anyone have any suggestions to rectify this, or does anyone have any idea what is causing it? Am I missing something here? Am I doing something wrong? Please help me out!
Many thanks in advance!

I'm trying to access a forum that requires a user name and password. When I do it on my mac it tells me the password is incorrect but when I do it on my iPad, I can access it without any problem. I can confirm the username and password are the same

I am trying to access a forum for which you need a username and password but it keeps telling me the username/password i've entered are incorrect. Bizarrely, when I enter the same username/password combination on my iPad, it grants access without any problem.
What could be causing this, is it an issue with cookies, caches or similar. How can I resolve it? The forum administrator is at a loss as to what the problem is.

Try the following steps in Safari to see if they help:
1) First try clearing the Safari cache. To do this pull down the Safari menu and select 'Empty cache...', then try logging into the site again.
2) If the issue continues then reset Safari by pulling down the Safari menu and select'Reset Safari...'. You will be presented with a list of items that can be reset. I suggest selecting the 'Reset saved names and passwords', and 'Remove all website data' options at a minimum.
Here is a list of the options and what they do. I pulled it from the Safari help page.
Clear history:
Clears the list of webpages you viewed.
Reset Top Sites:
Clears any changes you made to Top Sites, such as adding or pinning sites. If you also clear your history, your Top Sites page reverts to showing the webpage previews displayed when you first installed Safari.
Remove all webpage preview images:
Clears any thumbnail images Safari saved of webpages you viewed.
Clear the Downloads window:
Clears the list of files you downloaded from websites. Only the names are removed; the files themselves are still on your disk until you remove them.
Remove all website icons:
Removes website icons, which are small graphics that help identify sites on the Internet. You see them in the Safari address field and bookmarks list, and other places. These icons are stored on your computer.
Remove saved names and passwords:
Removes user names and passwords that Safari automatically fills in at websites that require them (if the AutoFill feature is turned on).
Remove other AutoFill form text:
Removes some personal information, such as telephone numbers, that Safari uses to automatically fill in forms on webpages (if the AutoFill feature is turned on). Removing AutoFill information does not remove information from your address book.
Close all Safari windows:
If you don’t close all Safari windows, someone could use the Back and Forward buttons to view the webpages you visited.
Reset all location warnings:
Clears any information websites saved about your location.
Remove all website data:
Removes cookies, tracking information, and other data that websites stored on your computer.

Problem with username and password

I've been trying to set up a new back up from scratch, and after losing my network and wifi connection, I just about have it all working again.
I have wireless connection, and I have the TC appearing correctly in Airport Utility, green light, reporting no issues, and seemingly ready to go.
It shows up correctly when I select disk in TM's system preferences, and it shows up and connects OK i n Finder, under shared items.
However, when I try to initiate a backup, its reporting a problem with the username and password, even though I'm entering the correct password.
I've checked it in the keychain, changed it in AU to be sure etc, and when I enter a wrong password, it just tells me its the wrong password, rather than this longer message explaining there's a problem with the username or password.
So I guess it could be with the username, but not sure what that might be - any ideas?
The only thing I can think of is that the name appears as Time Capsule b7e45c in AU, but as Iain MacDonald's Time Capsule on Time Capsule b7e45c in TM's system prefs.
Message was edited by: Iain MacDonald1

Exactly the same here...error 107 is reported when I try to back up.
There are 4 computers sharing the time capsule and only one of them reports this error.
Is there a way to remove the sparsebundle and start again for this computer without having to lose all the others?

I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?

Dear Apple I buy a refurbish iPhone 5s the IMEI ******* and ICCID ******** and i restored the device when i restored its locked to iCloud and i don't know the username and password i hope to help me about the problem asap. Best regard

Dear Apple
I buy a refurbish iPhone 5s the IMEI ******** and ICCID ********** and i restored the device when i restored its locked to iCloud and i don't know the username and password i hope to help me about the problem asap.
Best regard
<Edited by Host>

This is a user forum. You aren't talking to Apple here.
Return your iPhone for a refund. There is no way to remove the Activation Lock. Apple won't get involved.
<Edited by Host>

I cannot get into iCloud, it sites connection error. I am online otherwise. My username and password check out. Anyone else with a similar problem?

I Cannot getinto iCloud, it sites connection error. I am online otherwise. My username and password check out. Anyone else with this problem?

SUCCESS! I was trying to get in with Internet Explorer, and getting the error message.
I switched over to FireFox, and connected immediately!

Hi guys, I was presented with iPhone and then I rewrote the program, but right now, the ability to such a problem ..... want username and password

hi guys, I was presented with iPhone and then I rewrote the program, but right now, the ability to such a problem ..... want username and password

I don't understand. What "program" do you mean, and what do you mean by "rewrote"? If you mean that the iPhone has Activation Lock - that is, you restored the iPhone and now it's asking for the previous owner's Apple ID and password to activate the device - then you will need that information, or you'll need to get the previous owner to remove the device from his/her iCloud account:
http://support.apple.com/kb/PH2702
If you can't reach the previous owner or he/she is unwilling to cooperate, then the device is unusable by you.
Regards.

Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?

IWeb username and password problem

Similar Messages

Maybe you are looking for