IWeb video issues for Evo with Droid

Here is my setup. I dragged a bunch of MP4's into IPhoto to make an album. Then I opened IWeb and created an album page. I then dragged the newly made album from IPhoto into the well on the IWeb page. Then I set the poster frame on each video and put the videos in order. I did not check auto play. Next I published to a folder and then FTP'd that to my Godaddy account.
When I open the page with my desktop machine, I click the album, then a video and the video pops up with the control bar underneath. I hit play and all is beautiful. Now with my evo, I open the page, click the album, then a video. The poster frame of the video pops up but there is no control bar. There is no way to play the file. In the upper right is a small link that says download. When I click that, the video opens and plays fine.
My question is that I am afraid people won't see this little download link. Is it supposed to work this way or will I need to somehow add a disclaimer to let people know they need to click this in order to play? It is really small and I don't think people will see it.
Here is the link if there are any mobile viewers out there. http://www.texasmusicchannel.net/TMC_Beta/MMB/MMB.html
Also, is there anyway to get the nicer looking controlbar from QT 10?
Jeff

Have you tried a restart from device info, reset options? This will resolve many problems and is the first thing I would try. I have not heard of any problems with the YouTube app. I have tested the YouTube app on my own Pre Plus an it is working without any issues. Have you installed any 3rd party (homebrew) apps? Some times this can cause a problem with installed apps.

Similar Messages

  • Best video card for Aperture with Power Mac G5

    Any suggestions for a good video card to use with a 2.0 GHz dual processor G5 (AGP video). The current card is an ATI Radeon 9600 Pro with 64 MB of VRAM and the performance isn't fast enough to use Aperture for image edits -- sorts and metadata updates work well enough, but something like cropping is too slow to be workable.

    I looked long and hard for this card, and after waiting for months to get one, it finally arrived...DOA. I sent it back for exchange, and they had no more in stock, so my money was refunded. I looked again, and luckily found another one at a different retailer. It arrived and worked for about a month before artifacts started showing up. I sent it back to ATI for repair on December 4, and I still haven't gotten a replacement. The latest run of X800 cards that were retooled for ROHS compliance are crap. There are so many defective ones coming to their repair facility that repairs/replacements are taking more than 10 weeks.
    That being said, the difference it makes in Aperture over the 9600 is significant, but not earth-shattering. For RAW images, it won't make performance great, but it will at least be tolerable compared to what it is now. There's no other video card upgrade for an AGP G5 that is worth pursuing. Still, it's a rather expensive card at about $300, and considering the quality issues and how difficult they are to find, I'd say it's not worth the hassle. Save up for a new Mac instead. One of the new Mac Pros, even the 4-core model with the Radeon HD 2600 XT, is blazingly fast in Aperture compared to a maxed-out G5.

  • Best video format for sharing with windows users

    I've tried many ways to share videos with different clients, they mostly have windows computers (and windows media player I guess). I tried .mov (H.264) and mp4 (also H.264) from final cut pro X, but also from Compressor. I also did some test exporting Apple ProRes and then converting them with Mpeg streamclip, or even with Adobe Media encoder. Same problem, windows does not see these videos. I finally had to use a mov to wmv converter, but the final quality is really bad. Or upload the videos to vimeo, and then share the link (but I haven´t got a plus account, so I guess what I´m doing is not allowed, and i have only 500 mb per week). I believe that windows media player can be updated to open these phootage, but I cannot explain that to my clients.
    Which would be the most compatible video format to share with clients?
    Which paramaters should I take care of while exporting them?
    Thanks!
    Pablo

    You should be able to export as H.264... I'm going to guess that your problem might not be the video -- it might be the audio. The audio track should be converted to AAC. Try exporting H.264 directly from FCPX. From Share > Export File (you might need to add that destination) > Settings > Video Codec > H.264 (audio should automatically change to AAC.)  If you export as ProRes and transcode from another app, they might not be converting the audio for compatibility (LinearPCM/AIFF is not an "expected" audio format with h264/mp4, or even WMV, etc.)

  • Use standard DV Video out for monitring with HDV Project?

    i got a ADS Pyro AV Link fo Christmas and has a composite/S Video out on the back....and connected the composite to a monitor.....and FCE has a video out option in the View menu....and whenever i select it (with an HDV proj.) it goes from the Pyro's standard color bars to a black screen.... wheever i play my project back in the canvas it still is black? whats wrong? or is it incompatibility?

    That's not going to do what you want. FireWire is only for DV material not for HDV that's been converted to the Apple Intermediate Codec. You can output to HDV via FireWire, but only using the print to video function.

  • Aggregation issue for report with bw structure

    Hi,
    I am facing aggregation issue while grouping reports in webi.
    We have a BW query with 16 values, which we bring to bw as structure. Out of 16, 8 are percentage values (agg. type should be average).
    If we bring the data at site level, data is comming properly. But if we use same query and try sum/grouping( on region level), then percentage is getting added.
    Since it's a dashboard report with lots of filters, we cannot go for seperate query at each level(site, region, zone).
    How we can resolve this.. please give me suggestion.
    Regards
    Baby

    Hi,
    Since we were using structure, it was not possible to produce the required result in BO.
    We change structure to keyfigures and bring all of them in to BO. All the column formulas are now in BO side.
    Now it is working fine.
    Regards
    Baby
    Edited by: Baby on May 10, 2010 11:39 AM

  • Newest Video Cards for use with both Premiere Pro CS6 and CS4

    Hi, I am currently using PPCS4 and just upgraded to PPCS6. On one system I'm running a GTX 285 and on the other Quadro 2000. Can you tell me which new graphics card in each catagory will be able to run both CS6 and CS4 as I have many programs still setup in CS4? I tried tech sipport with no answer from them. I looked over GTX 570 or 580 for one system and Quadro 4000 for the other but I still have reservations if there will be a problem or not with CS4. Can you help me. I'm running Windows 7 Pro 64 bit, both systems are running Intel core i7's, one with 24gb ram and the other with 16gb ram. Thanks

    CS4 does not really use any advanced features of any card... so a relatively inexpensive AMD/ATI card will do anything a more expensive card will do... for CS4
    Starting with CS5 (a complete rewrite of the source code, to go from 32bit to 64bit, plus a LOT of other changes) an nVidia card helps with some actions
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    For a list of supported nVidia CUDA cards go to the CUDA help page - http://forums.adobe.com/thread/773101
    For many others, with at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a "supported cards" file
    Which nVidia card you buy will be a combination of 2 factors... how much $$ you want to spend for a given speed level (number of Cuda cores) and the size of your power supply to drive the card
    For a PARTIAL comparison of nVidia cards http://www.pacifier.com/~jtsmith/GPU.HTM

  • Video Issues for Native YouTube app and all Web pages

    Hello,
    I seem to have a problem with my Sprint Palm Pre. All of a sudden Im getting an error of 'there was an error playing the file' for ALL Youtube file using the Palm Pre Youtube app. As well as all of the we sites that were working a few weeks ago.
    Any ideas?
    thanks,

    Have you tried a restart from device info, reset options? This will resolve many problems and is the first thing I would try. I have not heard of any problems with the YouTube app. I have tested the YouTube app on my own Pre Plus an it is working without any issues. Have you installed any 3rd party (homebrew) apps? Some times this can cause a problem with installed apps.

  • Performance issues for iOS with high resolution.

    I made an app with a resolution of 480x320 for iOS. It works quite well.
    I then remade it with a resolution of 960x640. In AIR for iOS settings I set Resolution to "High".
    The app looked great, however there was a noticeable drop in performance.
    The app functioned the same way as the original lower resolution app. but it was lagging.
    Has anyone else had this problem?
    Am I doing something wrong?

    With my game, I had around 60fps on the 3GS, and around 50 on the iPhone 4, with the high settings. I got around 10 fps extra by using: stage.quality = StageQuality.LOW;
    Air 2.6. I tried with Air 2.7, but it seems like that command can't be used there (?)

  • Need a good flash video camera for use with my Mac...Suggestions?

    I have been looking at these things for weeks, and have heard remarks about different cameras not converting over to a mac very well. There is so much noise out there about different Cameras. At this point, I think I have it narrowed down that I want one with removeable/replaceable memory cards, and an HD Model. Looking to spend not much over a grand for a basic starter kit (bag, filters, lens covers, chargers, etc) and camera with a 2 year over factory warrantee, with ample memory. I am driving Cross-country with my brother who is getting out of the military and want to be able to make use of the footage I get. I want a good camera that I can easily make work with the Mac editing programs without having to purchase a bunch of extraneous programs, etc.
    Suggestions?

    I have the Panasonic HDC-SD5 and it works well.
    Be sure to pick a camera off this list:
    http://support.apple.com/kb/HT1014

  • Help - Need OpenGL Video Card for G4 with ADC

    OK, I've got a G4 with 1.8 GHz Dual Processors. I just upgraded from FCP 5.1 to FCP 6.0 and it tells me that FCP 6.0 doesn't like my video card because it "doesn't support OpenGL." So I need a new video card - problem is, my G4 Quicksilver utilizes an Apple Flat Screen with ADC connector. I really like the Studio Display and don't want to change it. Does anyone know of a video card with "OpenGL" (that will work with FCP 6.0) that also has a ADC connector????
    Thanks, Gilbert

    As far as I'm aware, the Radeon 9000 is ATI's most powerful card with an ADC connector and the GeForce4 Titanium is nVidia's, although I don't think either supports Tiger's Core Image etc.
    The following utility can monitor VRAM usage, which may help decide whether the 128MB version of the 9000 would be noticeably better:
    http://www.macupdate.com/info.php/id/15566

  • IWeb video help needed...

    Hi all,
    I'm trying to add some video to my webpage & I'm having no end of trouble.
    iWeb sends the file up okay but the silly things dont want to play once uploaded.
    I just tried again with a 40mb .m4v file and here's what happens...
    Try to open in Safari & the progess bar on the video shows it loading, once loaded the buttons to play etc can't be clicked yet when you right-click you can download the movie to view from the desktop.
    This is pretty much the same in Firefox & Chrome.
    Here's the strange thing though.
    On my iPhones (3gs & 4) & iPod Touch it runs fine...
    The video is from iMovie exported as HD & then converted through Toast to the smaller portable format. I also tried using Quicktime to convert & had mixed results, it would load in FF, give a Quicktime question mark in Safari & load in Chrome.
    So I guess my questions are as follows...
    1)- What's the best way to get a reasonable quality video out of iMovie for use on the web? (I tried some of its lower res export settings and it ended up as blocky and unwatchable.)
    2)- What is the best video format for use with iWeb that will be watchable across the widest number of browsers and devices?
    3) - What is the best way to get video to a web-ready state?
    Please bear in mind that I'm a novice with this stuff.
    Oh, the web-address would help for anyone that wants to check it.
    Here's the direct link;
    http://www.adamwoodhams.com.au/Site/VideoGallery/Entries/2010/11/16_CamelliaRevival.html
    As always.. help is deeply appreciated.

    Okay, have it sorted.
    I found a way to decrease the file size, maintain quality & get it to work cross-platform...
    I opened the video in QT7 Pro. From that there is a 'share' option that allows you to e-mail your video.
    I selected large & let it write the video file & auto-attach it to an e-mail.
    I then saved the video file to the desktop from that e-mail.
    The file was around 20mb as opposed to the 40mb+ from the other means.
    I dropped this video into iWeb and then selected 'Autoplay' in the QT tab of the inspector.
    Uploaded and now performing as expected.
    A couple of friends on Windows have checked it out & it's working for them too.
    Sounds like a 'round-about way of doing it but it's quite easy & gets the desired result. That is - video effectively streams and starts playing almost instantly.

  • Transformation Issue for 2LIS_03_BF

    Dear All.
    I am facing very strange issue for 0IC_C03 with the transformation of 2LiS_03_BF the cube was first got loaded from our Sandbox and every thing was fine, latter we connect BW development with R/3 development.
    i have transfer all the data source for MM Inventory and try to create the transformation for 2LiS_03_BF for the infosource 2LIS_03_BF_TR but it did not map any field, but with the sand box client with the same data source it mapped all the fields.
    Also when i try to load the 2lis_03_bf it make all the key field values to 0 even the process key is determined correctly in the R/3 side and Industry determination is alo set and also in BF10 BW is selected.
    i try to debug the update rule and found that the process key and the value is updated correctly in the routine but after that there is an exception coming CX_RSROUT_SKIP_VAL.
    please help....

    Yes reinstalling the business contents solve the problem and it come up with all the mappings but the strange problem is that all of my key figures after loading showing '0' value.
    i try to simulate the DTP by applying a break point on one routine and during the debugging it is filling the correct values and after some steps its throwing a CX_RSROUT_SKIP_VAL exception which might deleting the target value.
    i am totally lost that why this exception is coming as before it never comes it only comes when we connect the development system and try to load the cube from there.
    in between can you please help me out for getting rid of this exception.
    thanks & best regards,

  • Audio/video input for quicksilver

    Hi, does anyone have recommendations on the best/inexpensive (under $500 if possible) way for me to import audio and video onto a machine that has no audio input jack? I want to be able to capture stuff via rca audio and rca video or rca audio and s-video cables for use with quicktime, imovie and idvd. Any help would be greatly appreciated!
    Thank You
    S

    Datavideo's DAC-200 converts analog A/V to digital and connects to the computer via FireWire. I've seen it for under $200, so you can compare prices for the best deal.

  • Goods issue for subcontracting

    Hi,
    when I post a goods issue for subcontracting with trx MB1B and mvt 541 the system replies with:
    For object XABBELEGNR , number range interval 01
    does not exist OMJ6
    It seems that numeric ranges are ok

    Hi,
    Number Range for GR/GI Slip Number
    Please check in OMJ6 t.code are anybody maintained number range,If not please maintain.
    Hope this would help.
    Regards,
    JS

  • When I open iWeb it does not "Highlight" the New site or new page options. It ahs had this issue for over a year! I have tried uninstalling and re-installing it. What do I do? It opens the tutorial video, then when you close it, nothing else is clickable.

    When I open iWeb it does not "Highlight" the New site or new page options. It has had this issue for over a year! I have tried uninstalling and re-installing it. What do I do? It opens the tutorial video, then when you close it, nothing else is clickable.

    Open iPhoto, select a couple of photos and use the Share ➙ iWeb ➙ Photo page menu option.  That has jump started iWeb for others.  I could take a couple of tries.
    If that doesn't work try the following:
    1 - delete the iWeb preference file, com.apple.iiWeb.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iWeb folder. 
    Click to view full size
    3 - launch iWeb and try again.
    OT

Maybe you are looking for