IWeb website & Cyberduck load-URL not opening

I used iWeb to create a website and after reading the recommendations, I decided to use Cyberduck to upload my website. I successfully entered in the data from my web host and uploaded all of the website content into Cyberduck. The green light is ON next to my bookmark for my website. However, when I go to my URL (www.nhwctr.org), this is all I see:
HTTP/1.1 404
Connection: close
Date: Thu, 15 Sep 2011 22:52:43 GMT
Server: Microsoft-IIS/6.0
P3P:CP="BUS CUR CONo FIN IVDo ONL OUR PHY SAMo TELo"
MicrosoftSharePointTeamServices: 12.0.0.6421
X-DIP:216
X-UA-Compatible: IE=EmulateIE7
MS-Author-Via: MS-FP/4.0,DAV
MicrosoftOfficeWebServer: 5.0_Collab
X-Powered-By: ASP.NET
And at times, the message "server not found". Any suggestions as to what's going on????

Firstly, you don't upload your website content into Cyberduck - the whole point of Cyberduck is that you use it to upload your content to your server and not Cyberduck itself.
If you use Cyberduck, it will show you what is on your server as well as your desktop.
Open Cyberduck and on the left hand side there is a link that says 'Open Connection'. Click on this and then enter all your server details - ftp name, username and password and then click on connect and you will be connected to your host/server if these details are correct.
You should then be able to see everything on your server.
In Cyberduck, there is an Action button to the right side with a drop down menu - click on this and then click on Upload and you can then find the published files of your website that you published from iWeb to your desktop. Select the folder and click on upload and it will be uploaded to your server. Click on the separate index.html file and upload this too, so that it sits outside the site folder.
This is all you need to do to upload.
Don't know why you have Microsoft? iWeb sites work better with a Linux server and Windows hosting can cause problems, so you should probably consider changing.
What web host are you using?

Similar Messages

When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!

When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!

Tools > Options > Tabs - is the last preference there check-marked??

Encoder url not opening in browser.

dear all,
i have the link
When i try to open this link the corresponding file is not opening in browser
String file_str="http://www.testdomain.com/Test/TestFolder/12-Mar-2009/New Test File-Feb 09-Issue-6-v4-web.pdf"
after encodeing using
file_str = java.net.URLEncoder.encode(file_str);
output is :
http%3A%2F%2Fwww.testdomain.com%2FTest%2FTestFolder%2F12-Mar-2009%2FNew+Test+Fil
e-Feb+09-Issue-6-v4-web.pdf
but this is url not opening in browser (browser not decoding).
plz suggest.
thanx

URLEncoder class is not meant to encode complete URLs. Checkout this ...

Change the language of iphone from English to Chinese and iphope are not normally loaded and not opened. what can I do to restore it;

change the language of iphone from English to Chinese and iphope are not normally loaded and not opened. what can I do to restore it;

I found a fix for it, It turned out that the file that lists all of the songs on it got corrupt. I had to use 3rd party programs but it did work out in the end
Here is a link to where I found the fix: https://discussions.apple.com/thread/3631590?start=0&tstart=0
I followed the instructions of Geekdad3 a little bit lower on the page.
Good luck for anyone else who has this problem

My camera is not completing its loading its not opening,how can i fix it?

My camera is not finishing its loading it is not opening can any one solve my problem

Please reply to this message with the following information:
* What is the model of your phone?
* What is the OS version and Build ID found in the Device Information page? Please visit [https://support.mozilla.org/en-US/kb/how-do-i-find-what-version-firefox-os-i-have this link] if you need help finding the Build ID of your phone.
* Please provide the exact steps to reproduce the issue you are encountering.
* Who is your current cell phone carrier?
* How often do you encounter this issue?
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we have all the necessary information to investigate this behavior.

"Go to URL" not opening in a new browser window

We are using FrameMaker 10 and RoboHelp 9 in a Windows 7 environment.
When we create hypertext links, we use the "Go to URL" command. According to the FrameMaker 10 online help, this is what the command is supposed to do: "Launches browser and displays the specified Web page."
Then we publish the content to RoboHelp's WebHelp.
When we see the hypertext link in the WebHelp/HTML output, it looks like this: http://www.adobe.com
When we click it, the Web page appears inside the content frame of the WebHelp. It does not open a new browser window.
We can manually go into the html file and look at the hypertext link. It looks like this in the WebHelp output:
<a href="http://www.adobe.com">www.adobe.com
In order to manually change the link so that it opens the Web page in a new browser window, we can edit the link as follows:
<a href="http://www.adobe.com" target="_blank">www.adobe.com
After we manually edit the HTML file, save it, launch the WebHelp, and click the hypertext link...it now opens the Web page in a new browser window.
Is there a way to create the hypertext link in FrameMaker so that the WebHelp output will open the Web page in a new browser window?
Thank you in advance!
Tim

Please see the previous posts in this thread to review how you create hyperlinks in FrameMaker that open the Web page in a new browser window.
The problem is this: If you publish the exact same file to PDF, the hyperlinks will not work.
The properties (syntax) of the hyperlinks in PDF output need to look like this: http://www.adobe.com
The hyperlink syntax in WebHelp (in FrameMaker) needs to look like this: http://www.adobe.com" target="_blank
(...so when they are published to Webhelp, they look like this: "http://www.adobe.com" target="_blank")
Other than going into either the HTML or the PDF output and manually changing each hyperlink URL syntax for the specific output, is there a syntax that opens a new browser window in both PDF and HTML with one single "Go to URL" command?
Thanks in advance for your help.
Tim

When I try to install abode - it will download but says i have to close firefox before it will install. also i try to open a word document from a website and it will not open - it will only download

i install abode - it will download but not install and indicates i have to close firefox before it will download. Also, I try to open a word document from a website - it will download but not open.

You need to close Firefox to install many plugins, including those from Adobe.
As for the Word downloads, see the changing downloads action section of this link - https://support.mozilla.com/kb/Managing+file+types

Cant open itunes on system, will load but not open!

Every time I try to open itunes on my computer windows says it has encountered a problem and has to close itunes. I have tryed to uninstall and reinstall it both from the web site and the disk. I have tryed to dissable my McAfee virus protection. I have backed up all of my music and unloaded all of my itunes and ipode applications and folders and tryed to reload just itunes. I have called microsoft and they say it is a dell or itunes problem. I have called dell and they say it is a itunes problem, I called apple and they sent me two emails of whitch I followed to tee, I have scanned for viruses, I have scaned for spyware, and I am stumped. My system recognizes itunes in my programs and I can find all itune applications when loaded but it will not open, help!

I have read all feeds reguarding this problem and tryed installing quicktime standalone, all kinds of spyware etc, I have called dell, windows and apple and they all say it is the other companys problem, itunes and ipod worked for a year and a half and now nothing!!! latest error message I recive is "error# 0x80040707 dll function call crashed" Any help would greatly appreciated!!!! I an about to give up on itunes after three days of this! But i love my ipod please please please help!!!!!!!

Urls not opening

I have a number of buttons in a tutorial that need to open specific urls when clicked. I've set them to open in new tabs as per other comments on this issue I've seen elsewhere but the links still do not open.
The tutorial is saved on a web server.
Please can someone advise what else I can do?

Hi there
Well, actually there is one other thing to look at and consider. Where is the Captivate output when you are testing? If you say you are testing the compiled output from your hard drive, Flash Security settings may be nailing you.
Click here to read more about that
Cheers... Rick

Never had an issue now i do, can go to a webpage but click a link within that website and it will not open

Not sure what happened. I used to be able to go to a site and then click a link within that site and it would open. Now it won't, I added it to pop-page and still nothing
so i am in blogger and try to "add a gndget" and the link will not open
i was in myprofitbuilder.com and tried to open a banner code and won't open
I had to go to my other computer to use Internet Explorer
Thanks

Customer Care takes care of activation problems. Contact Customer Care

Firefox 4 Totally removed 3 incl registry 4 loaded will not open

Cleaned registry Reload Firefox 4 Click on desktop icon starts to try to locate application then stops .Have also tried to run firefox direct from download site No other firefox versions in processors. OS windows 7 Had no problems with old version.updated Java

No it was a fresh install totally removed all previous versionsIcon is for new firefox4 all plugins are up todate.When I click on icon it tries to open but just drops outwith completely no change or desktop activity.Have also tried thru the programs run mode still will not open Have removed & reloaded several times firewall & antivirus turned off no different.Firefox used to run perfect on Vers 3.06
Removed old firefox entries in the registry before install of Vers 4

I can pin three or four websites that load when I open Firefox, but I do not want a homepage to open full. Can I just have pinned sites open? At this point it looks like I must have homepage. Can a homepage be pinned?

I have three or four sites that I want pinned when my browser opens. And would like only those to open pinned and not have another tab (homepage) open.
Or if something has to open I'd like to choose one of my pinned sites to be focused on but still pinned.[http://www.dougsstuff.com/tabs.PNG link text]

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

Many websites (Ubuntu machine) are not opening or loading properly as they in IE.

Many sites are not compatible with firefox

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Edit > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Edit > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

My GoDaddy hosted, iweb created web site will not open flash

Hello,
I'll try to be thorough:
I created a site with iWeb - It is band site.
I uploaded/published the site to godaddy.com, along with my URL www.momsgreatweed.com
If I access the URL from the Mac on which I created the site, it works fine, in SAFARI only (not firefox) even after having emptied the cache.
On all other computers (Mac and PC) I cannot open the "Tunes" page, which has a flash player and 10 mp3 files.
I receive the following error:
To view this page, you must log into area "me.com" on idisk.mac.com:80
Needless to say, this is making me slightly insane. I can't possibly be the only person to ever experience this issue. I did call GoDaddy "tech support"; but a 30 minute call turned out to be useless.
Please, before I pull my hair out...any help would be GREATLY appreciated.
Be well,

You pasted the code in the HTML Snippet.
Upon further inspection I noticed the links to the tunes are wrong too :
(Sorry for the streched code)
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0" width="241" height="422" id="wimpy" align="center">
<param name="allowScriptAccess" value="always" />
<param name="movie" value="http://idisk.mac.com/kramocker//Web/Sites/mp3s/wimpy.swf" />
<param name="loop" value="false" />
<param name="menu" value="false" />
<param name="quality" value="high" />
<param name="scale" value="noscale" />
<param name="salign" value="lt" />
<param name="bgcolor" value="#7F0DF2" />
<param name="flashvars" value="playlist=http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/Jeez%20Loiuse%20%28Take%20439%29.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/World%20Of%20Her%20Own.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/Dream%20Believer.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/Beggars%20and%20Thieves.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/Blow%20it%20Away.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/End%20of%20Innocence.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/Living%20the%20Dream.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/Comin%27%20Home%20%28Johnny%27s%20Song%29.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/Where%20Are%20You%20Now.mp3&wimpySkin=http://idisk.mac.com/kramocker//Web/Sites/mp3s/skins/skintube.xml&wimpySkin=http://idisk.mac.com/kramocker//Web/Sites/mp3s/skins/skintube.xml" />
<param name="wmode" value="opaque" />
<embed src="http://idisk.mac.com/kramocker//Web/Sites/mp3s/wimpy.swf" flashvars="playlist=http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/Jeez%20Loiuse%20%28Take%20439%29.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/World%20Of%20Her%20Own.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/Dream%20Believer.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/Beggars%20and%20Thieves.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/Blow%20it%20Away.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/End%20of%20Innocence.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/Living%20the%20Dream.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/Comin%27%20Home%20%28Johnny%27s%20Song%29.mp3|http%3A//idisk.mac.com/kramocker//Web/Sites/mp3s/Where%20Are%20You%20Now.mp3&wimpySkin=http://idisk.mac.com/kramocker//Web/Sites/mp3s/skins/skintube.xml&wimpySkin=http://idisk.mac.com/kramocker//Web/Sites/mp3s/skins/skintube.xml" loop="false" wmode="opaque" menu="false" quality="high" width="241" height="422" scale="noscale" salign="lt" name="wimpy" align="center" bgcolor="#7F0DF2" allowScriptAccess="always" allowFullScreen="true" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" />
</object>

WorkSpace URL not Opening

Hi All,
I am unable to open the workspace url ...it gives these error
Error Message in Mozila
Not Found
The requested URL /workspace/index.jsp was not found on this server.
Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server Server at hyperion.xyz.local Port 80
Error Message in Explorer
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Please try the following:
If you typed the page address in the Address bar, make sure that it is spelled correctly.
Open the home page, and then look for links to the information you want.
Click the Back button to try another link.
Click Search to look for information on the Internet.
HTTP 404 - File not found
Internet Explorer
Pl Help me to figure it out...Other users are able to open...
Regards
BK

Hi BK,
1. Did you use IIS to deploy .
2. In that case, go to IIS manager and try to right click on 'workspace' folder -> browse.
3. Is it by any chance on 64 bit env?
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

IWeb website & Cyberduck load-URL not opening

Similar Messages

Maybe you are looking for