Iweb website doesn't look good on our web server (apache2)

hello,
I made a website on iweb and then published it to a folder. I then copied the files to our web server (linux, sles9). When I viewed the files on my laptop, it looked fine. But when I put the files on the web server, it looks bad.
please see www DOT tkminc DOT com
Why are all the spaces full of capital letter A's? It's not just that. The second page doesn't look good either. I was all happy about using iweb until I saw the results on the web server. Why is this happening?
Thanks,
oskar

Why are all the spaces full of capital letter A's?
I don't see any A's.
But if one does see such characters, it is normally because the server is (mis)configured to force all browsers to use the wrong encoding. See this note:
http://homepage.mac.com/thgewecke/iwebchars.html

Similar Messages

  • Gui program doesn't look good with startx

    I did not install a DE in arch linux, just to keep it lightweight. However, my GUI application doesn't look good running with start x.
    is there any package I can install to make it look better, like fonts, visuals, or the only way is to install either KDE or GNOME desktops?

    If you did not install a desktop environment or one of the windows managers, and you are using startx without having created your very own ~/.xinitrc, then you are using a very simple WM called twm.
    You may really want to look at the wiki documentation that was linked in your other thread -- If you are trying to stay light, there are other choices to Gnome or KDE.   Look at i3,  Openbox, xfce4, or any of the other beloved environments discussed at length of these forums.
    Even with twm, you can install and run a screen shot program.

  • KDE fonts under Gnome doesn't look good

    Ok, most people complains about GTK fonts under KDE. I have the inverse problem, my kde apps doesn't look good into gnome.
    If I run kde, the fonts are displayed properly with small size, but if I run gnome and the run a kde app, the fonts are very big.
    When i run a gtk app under kde, the fonts are showed properly but it doesn't use my gnome theme.
    Anyone have a solution on making kde apps looking good under gnome?

    Even though it's the inverse problem, it's likely still the same solution.  Gnome has a Gconf setting for DPI.  Otherwise you change it as an option to X.  Where you do so depends on how you start up X though (startx, xdm, kdm, gdm, etc).  I'll post back once I'm in Gnome and tell you where you can change the DPI.

  • Can someone help explain why my iWeb website doesn't publish correctly...

    I'm a professor and I'm trying to build a professional website--nothing fancy, six or seven pages and perhaps a blog. The site I have built on iWeb looks wonderful in iWeb, but once I publish the site (GoDaddy is hosting it), various text boxes, fonts, and background shapes get randomly distorted. Moreover, the site has different errors when viewed on my iPad, when viewed on my Macbook in Safari, and when viewed on Macbook in Mozilla. From what I've been gathering, web developers don't like iWeb. I'm not a computer expert, so I like the usability of iWeb (I'm not using any of their prefab templates--that might be the problem). I just want the site that I've built in the program (which looks good) to actually publish correctly. Any help would be greatly appreciated, even if it is just pointing to other software...
    Thanks!
    -Will
    Greensboro, NC

    What's the URL of your site so we can examine it first hand?   Also if you're considering some serious blogging I suggest you create your blog on one of the established blogging sites like Posterous, WordPress or Blogger. This will allow you to manage your blog from any computer anywhere and even from some mobile devices.  With an iWeb blog you must have a Mac and the domain.sites2 file used to create the site.
    Then you can embed that blog into one of your iWeb pages as shown on this demo page: Embed a Site Within an iWeb Page
    OT

  • How come the photoshoped images on my blog doesn't look good? They're a bit blurry.

    Before saving the images in photoshop, it looked good. But after posting it on the blog, they are a bit blurry. Here are the links to the post: http://bit.ly/15Ytu4x and http://bit.ly/19RzUWE. Could someone please help?

    I guess Blogspot is using some form of compression when you upload. Try re-sizing the images yourself in the Editor by saving a smaller copy (Image >> Resize >> Image Size) then add sharpening and try uploading again.

  • This doesn't look good.  Help would be appreciated.

    Booted up into 10.3.9 after being on OS 9.2 which is on another internal drive and got a BLACK screen with this message.
    etc/master password: NO SUCH file or directory
    Lucky enough I was able to go back to my OS 9 drive. My 10.3 is still there on the desktop with everything in it. What am I looking at and how can I get back on my 10.3 drive? I have my OS disks and still can access my files if need be from my OS 9 drive if this can offer to any solutions.
    Like everyone I have alot invested and do have most everything backed up on an external drive. **** good thing too.
    Thanks to anyone with some suggestions or assistance.
    Chad

    < have my OS disks >
    Well. it would seem to me that the best way to proceed would be as follows:
    You say you have backup copies of all your most important stuff.
    You also say you have OS9 and OS10 installed on 2 separate hard drives.
    This is not really necessary, as OS10.3 includes Classic (a perfectly functioning version of OS9).
    I suggest that after making backup copies of anything else in your computer that you feel is very important, you reformat the bigger of your two internal drives, and do a complete clean re-install of 10.3.9.
    Then you should just trash the other copy of OS9 so that the only thing your computer can start up from, is OS 10.
    Also, avoid the "master password" thing by not setting one. I've heard many terrible stories of people forgetting the master password. IMHO a password for each user is more than enough to stop intruders getting into my computer, plus encryption software that make my most sensitive files impossible to penetrate.

  • Exported QTmovie quality doesn't look good at all..

    I've composed, graded, and edited my sequence within FCS and just now exported it as a QT movie file.
    It looks WAY less quality than the original movie file which was encoded with Compressor to Apple ProRes 422 (HQ).
    Let me explain about my workflow and please tell me what I am missing here.
    1. Shoot with Canon 5D Mark2 at the highest quality
    2. Encode the files to Apple ProRes422 (HQ)
    3. make a sequence and send to Color
    4. Create two grades, G1 is in color and G2 is in B&W, render and send back to FCP
    5. make a new sequence, put G1 in track v1 and G2 in track v2, bring it to Motion
    6. in Motion, change the top layer's blend mode to exclusion, save it and export as QT movie
    7. import the exclusion sequence to FCP, make a new sequence with it
    8. Now, v1=exclusion movie(background) and put v2=original color clips(showing part of it), send it to Motion
    9. Compose two layers with bezier mask putting some feather around
    10. Save it in Motion and export it in FCP as Apple ProRes 422 (HQ)
    The final output looks bad. Especially, the feather and graded parts looks choppy and not smooth.
    Information of the files before and after is almost the same except output file has *Integre (Big...)* right after Apple ProRes 422 (HQ)...
    I will look into details and all the settings but if you think of anything please let me know.
    Where to look and what should be set ...etc.
    I'd really appreciate your input! Thanks in advance.

    Hi Nick,
    Thanks for the link but it doesn't seem to apply my case.
    I've already set the QT preference and I use Leopard+FCP7.
    Maybe, I am using too much of Motion/Color for composing, layering, masking etc?
    All the integration cause that kind of result??---Lesser quality export.
    Please let me know what I should keep in mind most when I want to integrate FCP/Color/Motion, going back and forth.
    I'd appreciate any advice from you!

  • New itunes 9 mini player doesn't look good

    for a moment i was having graphic issues w/ itunes or my compt. the new shadow at the top header makes it look like a bent metal. i like previous graphic where it was simply across the surface and the window simply pops-out of the screen among other window on your screen. also the void space at the bottom is disconcerting. it just appears that something that something had to be there. i see no additional value or function for these two new visual characteristics.

    You can post feedback about iTunes from the main iTunes drop down menu.
    MJ

  • Having problems compressing web movie, quality doesn't look good, PLZ HELP

    Hi guys,
    I used to be able to create a sharp/ crisp clean quicktime 7 web streaming movie in compressor 3 with it's default settings but lately it appears to be compressing a very poor quality QT7 web streaming movie. I have not changed any settings as far as I know.
    I have always used H.264 800kbps for High Bandwidth and never had any problems with quality or the way it looked.
    Can anyone help me out please.
    Thanks,
    Zia

    Are you compressing the same kind of source material (content) as before? If you have content with a lot of fast motion (i.e. sports), you might need to adjust the video bitrate accordingly (increase it).
    You could also try implementing frame controls and try an other more appropriate frame size. Have a look at this post: http://discussions.apple.com/thread.jspa?messageID=7525834&#7525834

  • My website doesn't look the same as it does in Dreamweaver

    I just finished designing most of my site on dreamweaver, and I uploaded it to a test site and now nothing looks like it did in dreamweaver! Can anyone explain to me where I went wrong?!?
    http://test.netfc.com
    Help please! Thanks!!!

    Its hard to say. Do you want to provide a screen shot of what it should look like?
    At the moment its scrambled all over the page ....so don't know where anything should be without a visual clue.
    Found a clue:
    The link to your stylesheet is pointing at a file on your computer NOT at the css file on your remote server:
    <link href="file:///C|/Documents and Settings/Administrator/Desktop/MM_DWCS5/Chapter04/twoColFixLtHdr.css
    Hummmm.....did you define a site folder at the outset of your project so Dreamweaver can manage your files and keep them all in one folder?

  • I use cs6 and am trying to get my photos to look good on a web site with a 4meg limit

    have a bunch of photos I am shareing on a web site. I regulary see chrystal clear photos in the 30-50k range but by the time I convert my Nikon raw files to jepg  then reduce them to the 4meg limit they look sorry what am I doing wrong?

    Not enough information to tell.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Why the jsp tag jsp:forward page="page.jsp" / works when i work with web server iPlanet in a Solaris machine and doesn't work with the same web server, in a Windows 2000 machine ?

    The request parameters don't go to the "page.jsp"...

    If someone else runs into this, here is how I solved the problem -
              If you create a PrintWriter object with the autoflush option, it
              doesn't flush the underlying buffer till you call println on it. I
              looked through the generated code for the servlet, and it was doing a
              JSPWriter.print() to output information.
              So, I changed the ResponseWrapper to keep a handle to the PrintWriter
              object, and then flush it in the filter, and that works.
              Why the same code behaves differently in JRun & Weblogic, I'm not sure
              --Sridhar
              

  • Our web server has been changed can't connect through outlook now

    Dear Members,
    i am really thankful for you i have learn a lot of things from this forum.......today i want to ask one question about outlook, we have a website and we use the company email addresses some period ago we received a lot of spam emails when we talk to our
    hosting company they said we will transfer your website to a new server. as they transferred it to new server all the email address were deleted automatically. but we got the backup of emails and create all the email address with same id again,,,,........problem....is
    this that now we can't connect through outlook for example if i try to setup outlook it goes up to "try unencypted connection" and here stops that can not establish a connection. if i go directly to mail server there all is fine. the hosting company
    give us all the spec that incoming port should be 110 outgoing 587 and pop3. i tried all this but not working even i tried on such a computer where never outlook was installed .....but there it does not work as well..................Thanks;;;;;;;;
    Tahir Mehmood

    Hi Tahir,
    According to your description, my understanding is that you can use OWA but Outlook using pop3 can't work. Right?
    In general, the port for SMTP they are 465 (SSL) and 587(StartTLS) and 25 (unencrypted). 
    The following list for your reference:
    Default   Ports:
    Server:
    Authentication:
    Port:
    SMTP   Server (Outgoing Messages)
    Non-Encrypted
    AUTH
    25 
    Secure   (TLS)
    StartTLS
    587
    Secure   (SSL)
    SSL
    465
    POP3   Server (Incoming Messages)
    Non-Encrypted
    AUTH
    110
    Secure   (SSL)
    SSL
    995
    As you said, your outgoing port is 587,  I  recommend you refer to the following screenshot to set your pop3 setting, and check if any helps:
    Best regards,
    Niko Cheng
    TechNet Community Support

  • All websites down after uninstalling Exchange 2010 from Web Server

    Hello,
    I successfully uninstalled Exchange 2010 (Client Access Role) from a webserver that hosts a company website and some other web apps, as a last step on a migration to 2013. But after that, some application pools were not started automatically, resulting on a
    503 error even after starting the app pools manually.
    I was getting IIS event Id 5139.
    Fortunately it is a hyper-v server so I applied a snapshot I created prior to uninstalling exchange and got it working again. I need to know what happened before doing it again.
    I would like to know about similar scenarios and how did you fix it.
    thanks in advance.

    Hi RCKSTR,
    Are you running website in Exchange? If yes it is not a recommended way of working. Exchange is supposed to a standalone.
    Websites will not run if IIS uninstalled.
    Ensure IIS is installed and your website settings remains the same.
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • HD TV show (Monk) doesn't look very HD on the AppleTV

    Is it playing the SD or HD? It sure doesn't look good.
    Also, you can only buy the SD from the AppleTV menus.

    Hey, Kenuck, do you know when HD TV shows are coming to Canada?
    The link you gave to the Apple Canada website does say that we can watch HD TV shows, as you quoted, and that we can buy Grey's Anatomy. Both of these things are unavailable at the iTunes Canada store and I can't find a date for when/if they are coming to the Canada store.
    Anybody know when/if HD shows are coming to Canada?

Maybe you are looking for

  • How to delete my iCloud using an old email no longer in use.

    I have an old AOL account that I no longer use.  I tried resetting the password but that didn't work.  So every time I go to delete the account it asks for my password which I do not know or not able to get anymore.  Does anyone know a way to delete

  • How to delete song on iPhone which can't be wiped?

    Hi there, after about one full day of fighting with iTunes Match (including full deletion of iCould Library by using an empty iTunes Library), I finally have a working iCloud Library with all my songs and artwork (tested in my iPhone 4S). Unfortunate

  • Frieght for intra company stock transfer

    hi all, Greetings! Our requirement is to include the Freight cost included to the intra company stock transfer. Generally, we don't use any pricing procedure for intra company STO and ther is no condition tab for the PO.And the GR will be valuated at

  • Get_file_name problem with forms 9i

    Hi all, Why does not the built-in function get_file_name work in forms 9i ? I created a button in my forms and coded the when-button-pressed trigger associated with it , in which I declared a varchar2(60) variable to hold the return value of get_file

  • New update after restore?

    for some reason iTune said i have updates when i already have the current version of the app after i have restore my iPod touch