IWeb with flash widget not posting correctly on Firefox on PC
I created pages on iWeb, with flash widget. It looks great on Safari and Firefox on the mac, terrible on firefox PC. Basically on Firefox PC, the iWeb created site that should be in front of the flash file, gets behind it when the page loads, so the page only shows the flash file.
Can anyone help? I have tried to figure out the HTML and CSS, without success.
Here's a link to a page that's fine on the Mac side, bad on the PC:
www.franckgoldberg.com/Design/AR_Media.html
Why would it work on the mac, and not on the PC?
The kind folks at Firefox and Flock should know that.
How did you succeed on your second example
The moving butterflies is a web page with the SWF file (made in Keynote 08) embedded in the HTML Snippet with the iframe HTML element.
http://www.wyodor.net/_Movies/iWebBannerVids/VlinderSWF.html
[The static butterfly|http://fohn.net/monarch-butterfly-pictures> is an image on top of it. Idem ditto for the transparent area around the SWF. Drag both images to see.
Similar Messages
-
Iweb updated page does not display correctly in firefox or safari
www.rohanstevenson.com
tried to update my site with a couple of cues and the wheels have completely come off. i cannot get the site to display correctly.
it looks a bit better if i open the page directly from the computer, but after sending it to ftp host it will not load up properly in the browsers.
i have no idea what is going on and i rather desperately need that site back up and running
help!!This is happening probably because the text encoding on your server end is set wrong. Or perhaps your FTP program is doing the encoding differently. This is commonlly seen when uploading iWeb pages to 3rd party servers and can be corrected.
Our own Tom Gewecke has a nice writeup about these strange looking characters that can appear. He also has some suggestions about what to check and what to do. Check it out and see if any of it might be relevant to your situation. If not come on back and we'll keep trying to troubleshoot with you...
http://homepage.mac.com/thgewecke/iwebchars.html
Good luck! -
Help with Flash Player- Not Playing
I recently went to a website where it said that i needed to
download the latest version of Flash Player. I followed the
directions and installed it, and the movie came up after
installation, but on the website it still said i needed to install
flash player again. I went through the other forum posts and tried
everything, but it still wouldn't show up. Then today i was on the
website and finally the video came up, but then when i refreshed
the page the video was gone and it again said i needed to install
the latest version of Flash Player. The video has shown up twice in
the past day, then says i need to reinstall again. I've tried
everything, but the videos just wont show up. Does anyone know how
to fix this for good?JDB... your problems and solutions are different (and much
more complex). Read this CAREFULLY.
Printable, lovingly formatted versions of these steps, valid
as of 9/15/2007 are available. I recommend printing them and
following along with the print version:
.doc:
http://www.supportflash.com/bent/flash_player_ocx_troubleshooting.doc
.pdf:
http://www.supportflash.com/bent/flash_player_ocx_troubleshooting.pdf
The issue is this: You have multiple accounts on your XP
machine. One account plays Flash no problem, the other doesn't,
although both are Administrator accounts. Or possibly you have only
one account, and that account fails to play any Flash content. In
any case if you have ANY odd trouble with the Flash Player ActiveX
control for Windows as of September 2007, these should be your
steps. And yes, you need to do both sets of steps, in order!
The cause: This is usually caused by either or BOTH of the
following problems:
1. Leftover locked bits of an old Flash Player installation
2. Registry permission errors (aka 'ACL's)
OK so what do you do about this?
ONE: Identify possibly leftover Flash player bits
a. Open C:\WINDOWS\system32\Macromed\Flash folder.
b. Download the latest FP uninstaller from
http://www.adobe.com/go/tn_14157.
c. Run the uninstaller. If you get a notice saying you need
to reboot, then reboot.
d. Look at C:\WINDOWS\system32\Macromed\Flash folder.
e. Does any file ending in .ocx remain? (flash.ocx,
flasha.ocs, flash9d.ocx etc...)
e1. If no, then you don't usually have any leftover locked
bits.
You're done with this part of the problem, proceed to TWO.
e2. If yes, then that remaining .ocx file may be locked.
Right click it
and select properties and look at the version tab.
What is the version number?
f. Is the version number Flash Player 9.0.16.0 or earlier?
f1. Use the uninstaller instructions from this technote:
http://www.adobe.com/go/4da116d3
-- section "Flash Player 9.0.16.0 and earlier"
-- DO NOT re-register the uninstaller. ONLY do this
UninstFl.exe part.
Yes, you'll need to know how to use the command line to do
this. If you're not
comfortable with that then take your machine to someone who
is!
g. Is the version number Flash Player 9.0.28.0 or higher?
g1. Use the uninstaller instructions from this technote:
http://www.adobe.com/go/4da116d3
-- section "Flash Player 9 (9.0.28.0) and later"
-- DO NOT re-register the uninstaller. ONLY do this
UninstFl.exe part.
In both the D and E sections above you'll need to use the
specific name of the control that remains
in the C:\WINDOWS\system32\Macromed\Flash. So if you had a
stuck flash9b.ocx[DJM1] in the folder
and version was 9.0.28.0, your uninstall command would look
like this:
UninstFl.exe -u
c:\windows\system32\Macromed\Flash\Flash9b.ocx
That said, if you have trouble running these commands it
really is necessary to find someone who knows how
to use the command line, either a friend or a local
professional. Or spend some time learning about the
command line yourself.
h. RERUN the uninstaller you downloaded earlier. This should
get rid of the remaining (now unlocked) .ocx file and fix any
registry keys associated with it.
ALL of section "ONE: Identify possibly leftover Flash player
bits" is important. BUT this locked bit problem only happens on
maybe one out of 50 machines. So most people with installation
problems such as this are not going to have locked bits.
AND even after reinstalling you may still have continued
problems with Flash Player not being recognized.
Then we have to move on to section two..
TWO: Registry Permission Problems
We have been working on Flash Player failures caused by
Windows System Registry issues. We have not been able to determine
what’s causing these permissions to change. But that change
prevents the successful installation of Flash Player ActiveX
control (used by IE Windows).
Registry permission problems can be resolved using a tool
called SubInACL, built by Microsoft to correct system registry
issues.
Symptoms: What to look for:
1. If you install Flash Player on IE and are unable to see
Flash content on any webpage
2. After installation C:\WINDOWS\system32\Macromed\Flash
will have flash 9c.ocx in it but it failed to register
3. It appears that Flash Player installed correctly, but
unable to view Flash content
4. Flash Player works on other browsers, but NOT Internet
Explorer
5. If you are missing groups in HKEY_CLASSES_ROOT Advanced
Permissions
6. If you have run registry cleaners in the past, this may
have corrupted your system
Warning: The following solution involves the Windows System
Registry. Editing or manipulating the registry incorrectly can
result in serious system damage which may require re-installation
of the operating system. If you are not comfortable editing the
registry, then take your system to a professional. If you choose to
proceed, then it is essential that you create a complete system
backup and a Windows System Restore Point before proceeding. Adobe
Systems cannot be held responsible for damage resulting from this
information.
1. Select Start > Run
2. Type in “regedit”
3. Right click on HKEY_CLASSES_ROOT
4. Select Permissions
5. Select Advanced
For Vista
Compare your permissions with the ones in this screenshot.
http://www.supportflash.com/vista_key.png
For Window XP Pro or other flavors of XP
Compare your permissions with the ones in this document
“Troubleshooting system registry issues that prevent Flash
Player installation” (scroll down to the bottom of page).
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=kb400116
Notice any major differences, missing groups, incorrect
permissions?
How can you repair the System Registry, what's the fix
Download SubInACL from Microsoft to fix permission issues
that prevent the Flash Player Installation.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fb1634cb
NOTE: The Microsoft version of the .cmd script run by
SubInACL is not be run on any XP version other than Pro. HOWEVER,
the Adobe .cmd script in the above technote is tested safe for ALL
VERSIONS OF XP!!!
If you have a Windows System Registry permission issue that
sounds like the one described above, SubINACL may be the solution.
Please note that if you have this issue on multiple accounts on one
machine you’ll need to fix each machine individually. -
So I've just started using iWeb to post photo blogs about my adventures in snowboarding.... The home page turned out great... BUT the individual blog posts are not posting correctly at all.....I add my entries like so....
text,text,text,text.vffdfdfdsfffvbfss
then an image here
more text,text,text,klhkjhkhklhlh
next image here
more text,text,text
another image here
So after I get it all done and post it the text and image placement comes out very different from how I entered it... Sometimes the image is over the text.....
I have to go back and move my images around and add massive amounts of spacing to get it to seem somewhat normal... it's not coming out how I want it... WHY is iWeb doing this....
Here's the URL to my Blog.... http://web.me.com/tylerbrawley/TylerBrawleys_Blog/Splitboarding_the_Wasatch/Entries/2009/3/27_Mill_D%2C_Short_Swing3-27-09.html This published page looks nothing like what it is in iWeb...
Here's the same Blog published to a web site forum... http://splitboard.com/talk/viewtopic.php?f=5&t=6633
I wish I could get iWeb to publish just like that... Can anyone help?
Thanks in advance!Really? No one can help?
-
The software for communicating with ipod is not installed correctly..
Everything used to work fine on my laptop. I'm fairly sure it was after I had uninstalled Zune crap from my laptop when my iTunes started messing up and saying "the software for communicating with ipod is not installed correctly".
I've searched the whole internet front to back about this error and most things I find are from 2005'ish. I've tried changing the registry permissions, reinstalling itunes, clearing out everything that has to do with itunes, doing all the msconfig things, manually starting the ipodservice.exe.
I still cannot figure it out and I've had this error for like 3 months. Only thing that I notice that MIGHT be odd is that I'll have ipodservice.exe running (from System) and when I open iTunes another ipodservice.exe will open (from my username) and then close after a few seconds and then I plug my ipod up and bam, the error from above comes up. Anyone have any clue? Like I said everything worked fine at one point!
Thanks!Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!
-
Photo clicked with flash does not give clear image
photo clicked with flash does not give clear image
I did some more testing with this, and it appears to be a Gmail problem with iOS iPhoto.
I called Apple support, and this issue was escalated to engeneering.
When sending photos from iPhoto for iOS via Gmail from the iOS device, only the small and medium sized photos can be opened in Mail on the iOS device. The large and original photos do not open in Mail.
This occured across different devices I tested, including iPad 2, 3, and 2 separate iPhone 4S devices. All were updated to the lastest firmware. iPhoto was uninstalled, and reinstalled.
When sending and receiving photos from iPhoto for iOS via iCloud me.com email servers, all the photos of different sizes could be opened in Mail fine on the iOS devices.
It appears that Gmail servers somehow change the way the photos are encoded, and make them not viewable on the iOS device. Very disappointing, since the native Mail program has no problem, and photos sent via gmail or other are fine.
Another iPhoto for iOS glitch! -
The web site of Adobe does not show correctly in FireFox
I have a bizarre problem. The site of Adobe (including where I can download the flash player) does not show correctly in FireFox and I only see it as a text HTML page, but without most images (typically, for instance, I do not see the image "Download now" but see a text line "Dowload now", and so on...
This seems to specifically affect the Adobe web site as I have no problme for other web sites (so far).
It is something specific to FireFox as I do have the problem with Internet Explorer.
The problem persis even if I restart FireFox without any add-on (safe mode).
Any suggestion ?Does this only happen in Firefox? What do you see with Internet Explorer or Chrome? If it is only Firefox, I'd try these steps in this order:
1. Clear your cookies and cache
2. Reset your Firefox settings
3. Make a new profile
Chris -
Page does NOT load correctly in FIREFOX
My HOME page does not RELOAD correctly in FIREFOX when when
the link is clicked on from another page in my little "2 page"
site.
BUT if I click on the BACK button it loads CORRECTLY
It works correctly in IE
Here is the Home page:
http://www.quicksubmitbrokerswholesale.com/
Here is page 2 where clicking on the link in FIREFOX loads
incorrectly:
http://www.quicksubmitbrokerswholesale.com/submitforpricing.html
What do I need to TWEAK to make it work OK in FIREFOX?
Thanks in advanceHere is the crux of all your problems:
<!-- Fireworks 4.0 Dreamweaver 4.0 target.
You built the site in Fireworks, and a very old version at
that, and then
imported the site into DW. Graphics apps like Fireworks and
Photoshop
produce bloated, convoluted code and fragile structures. If
you want a
worthwhile site you will have to start over. Create only your
graphics in FW
and build the entire site in DW. Be cautioned though such an
old version of
DW won't produce a site consistent with today's standards.
You really should
upgrade if you want to deliver value to your client.
Walt
"electro-dud" <[email protected]> wrote in
message
news:gb2k07$9v4$[email protected]..
> My HOME page does not RELOAD correctly in FIREFOX when
when the link is
> clicked
> on from another page in my little "2 page" site.
> BUT if I click on the BACK button it loads CORRECTLY
>
> It works correctly in IE
>
> Here is the Home page:
>
http://www.quicksubmitbrokerswholesale.com/
>
> Here is page 2 where clicking on the link in FIREFOX
loads incorrectly:
>
http://www.quicksubmitbrokerswholesale.com/submitforpricing.html
>
> What do I need to TWEAK to make it work OK in FIREFOX?
>
> Thanks in advance
>
> -
Firefox display problems regarding this customers site:
http://gardenia.dk/collections/collection/
Thumbnails are not displayed correctly in Firefox - only a tiny bit of the picture is visible, incorrect scale (displayed correctly in Safari and Google Chrome).
Can I do anything to make it work in Firefox, too?
Kind regards,
AnnetteThis article might help you-
https://support.mozilla.org/en-US/kb/websites-look-wrong-or-appear-differently -
Certain special characters which display correctly in Explorer do not display correctly in Firefox. Example: <font COLOR="#1f1a17" FACE="Symbol" SIZE="3">¬</font>
Is there a fix?The symbol font usually doesn't work in Firefox, a website needs to use an Unicode replacement or an HTML entity to specify such a character.
See:
*[https://developer.mozilla.org/en/Mozilla_Web_Developer_FAQ#Why_aren.e2.80.99t_symbol.2fdingbat_fonts_working.3f Why aren’t symbol/dingbat fonts working? - MDC FAQ]
*http://en.wikipedia.org/wiki/Unicode_symbols
*http://en.wikibooks.org/wiki/Unicode/Character_reference/2000-2FFF -
Buttons do not appear correctly in Firefox
My company uses IE 7 as their standard browser within the company. I am developing an extranet application so that the public can access my company's information. Since APEX supports both IE and Firefox, the application needs to appear the same in both versions. Everything looks fine except for the buttons.The buttons in my applications appears correctly in IE 7 but it does not appear correctly in Firefox 3.5.5.
You can access my application via the following link:
https://miniprofile.panynj.gov/pls/apexcfp8/f?p=120:1
Can someone assists please. I will forward you the customized CSS and templates that the application references via e-mail, if needed.
Thanks in advance,
RobertHi Robert,
According to FireBug, the following style in the PA_t15WL class is causing the problem:
background-position:0 50%;If you remove this, the button displays ok in FireFox - not sure what effect it has on IE7, though
Andy -
Website not displaying correctly on Firefox
Hello,
My website www.gauravmittal.com is not showing correctly in Firefox. The images are showing up
as thumbnails below each other as opposed to large scrolling images. I have tried everything possible
from your available troubleshoot guide.
Please help fix this.
Thank you.Firefox isnt the only browser having that issue, I used a Webkit based browser (like Safari) and came up the same.
* http://jigsaw.w3.org/css-validator/validator?uri=http://gauravmittal.com/&profile=css3&usermedium=all&warning=1&vextwarning=&lang=en -
Flash movie not displayed correctly in IE 8 on some Windows OS
Has anyone seen this problem?
I'm using CS4 to export a basic flash movie with embed tags pre scripted...
And the issue is that on some OS systems using Vista or Windows 7 and IE 8 as a primary browser, it appears that IE 8 is not displaying the flash banner completely.... its CROPPING it off... This is very strange because the banner works fine in FireFox, IE7,Opera,Chrome but not I.E.8 on some OS systems...
If you google "Flash not displaying correctly in IE 8" you'll get alot of people with the same issues but no real definate fix...
Are there any suggestions as to what i could try?
Do i need different flash embed tags? Or is this a user issue?
Please Advise as soon as possible...
ThanksI'm sorry, i forgot to explain that I didn't upload the flash published html because it did and produced the exact same results.
The flash published still got cropped off on 1 vista os(I.E 8) running from a laptop and 1 windows 7(I.E. 8) latop os...
Its good to hear that you're able to see it clearly... however in my QA efforts, i've been asked to fix the issue or drop the flash banner all together.
I've tried every which way, i've even converted the embed tags (not uploaded by the way) to a js script and it STILL gets cropped of on 2 ie8 run OS systems...
And now i'm not sure what else to try on my end.
I'm currious if because this is an XML driven flash banner, this may be an issue? But it still doesn't explain why some people can see this in IE 8 as you can and others get a cropped banner like in my screen shot sample.
Again i invite everyone in the forum to take a look at the sample links, as i'd be curious to see who else is seeing this.
By the way "kglad" Thank you so much... please keep the suggestions coming... but everything you've suggested, i've tried.
This is very perplexing. Is this a setting issue? or is there some setting on the user side i'm not aware of? Either way, as usual... the flash developer is blamed so i must find a solution.
Link to flash sample
http://www.extremefx.net/flashie8issue/flashtest.html
Link to screen shot sample on a Vista and Windows 7 running IE 8 browser
http://www.extremefx.net/flashie8issue/ie8issue.jpg
Again... eagerly await feed back from you and the rest of the forum.
Message was edited by: RegGFX -
Abstract classes and methods with dollar.decimal not displaying correctly
Hi, I'm working on a homework assignment and need a little help. I have two classes, 1 abstract class, 1 extends class and 1 program file. When I run the program file, it executes properly, but the stored values are not displaying correctly. I'm trying to get them to display in the dollar format, but it's leaving off the last 0. Can someone please offer some assistance. Here's what I did.
File 1
public abstract class Customer//Using the abstract class for the customer info
private String name;//customer name
private String acctNo;//customer account number
private int branchNumber;//The bank branch number
//The constructor accepts as arguments the name, acctNo, and branchNumber
public Customer(String n, String acct, int b)
name = n;
acctNo = acct;
branchNumber = b;
//toString method
public String toString()
String str;
str = "Name: " + name + "\nAccount Number: " + acctNo + "\nBranch Number: " + branchNumber;
return str;
//Using the abstract method for the getCurrentBalance class
public abstract double getCurrentBalance();
}file 2
public class AccountTrans extends Customer //
private final double
MONTHLY_DEPOSITS = 100,
COMPANY_MATCH = 10,
MONTHLY_INTEREST = 1;
private double monthlyDeposit,
coMatch,
monthlyInt;
//The constructor accepts as arguments the name, acctNo, and branchNumber
public AccountTrans(String n, String acct, int b)
super(n, acct, b);
//The setMonthlyDeposit accepts the value for the monthly deposit amount
public void setMonthlyDeposit(double deposit)
monthlyDeposit = deposit;
//The setCompanyMatch accepts the value for the monthly company match amount
public void setCompanyMatch(double match)
coMatch = match;
//The setMonthlyInterest accepts the value for the monthly interest amount
public void setMonthlyInterest(double interest)
monthlyInt = interest;
//toString method
public String toString()
String str;
str = super.toString() +
"\nAccount Type: Hybrid Retirement" +
"\nDeposits: $" + monthlyDeposit +
"\nCompany Match: $" + coMatch +
"\nInterest: $" + monthlyInt;
return str;
//Using the getter method for the customer.java fields
public double getCurrentBalance()
double currentBalance;
currentBalance = (monthlyDeposit + coMatch + monthlyInt) * (2);
return currentBalance;
}File 3
public static void main(String[] args)
//Creates the AccountTrans object
AccountTrans acctTrans = new AccountTrans("Jane Smith", "A123ZW", 435);
//Created to store the values for the MonthlyDeposit,
//CompanyMatch, MonthlyInterest
acctTrans.setMonthlyDeposit(100);
acctTrans.setCompanyMatch(10);
acctTrans.setMonthlyInterest(5);
DecimalFormat dollar = new DecimalFormat("#,##0.00");
//This will display the customer's data
System.out.println(acctTrans);
//This will display the current balance times 2 since the current
//month is February.
System.out.println("Your current balance is $"
+ dollar.format(acctTrans.getCurrentBalance()));
}Get a hair cut!
h1. The Ubiquitous Newbie Tips
* DON'T SHOUT!!!
* Homework dumps will be flamed mercilessly. [Feelin' lucky, punk? Well, do ya'?|http://www.youtube.com/watch?v=1-0BVT4cqGY]
* Have a quick scan through the [Forum FAQ's|http://wikis.sun.com/display/SunForums/Forums.sun.com+FAQ].
h5. Ask a good question
* Don't forget to actually ask a question. No, The subject line doesn't count.
* Don't even talk to me until you've:
(a) [googled it|http://www.google.com.au/] and
(b) had a squizzy at the [Java Cheat Sheet|http://mindprod.com/jgloss/jcheat.html] and
(c) looked it up in [Sun's Java Tutorials|http://java.sun.com/docs/books/tutorial/] and
(d) read the relevant section of the [API Docs|http://java.sun.com/javase/6/docs/api/index-files/index-1.html] and maybe even
(e) referred to the JLS for "advanced" questions.
* [Good questions|http://www.catb.org/~esr/faqs/smart-questions.html#intro] get better Answers. It's a fact. Trust me on this one.
- Lots of regulars on these forums simply don't read badly written questions. It's just too frustrating.
- FFS spare us the SMS and L33t speak! Pull your pants up, and get a hair cut!
- Often you discover your own mistake whilst forming a "Good question".
- Often you discover that you where trying to answer "[the wrong question|http://blog.aisleten.com/2008/11/20/youre-asking-the-wrong-question/]".
- Many of the regulars on these forums will bend over backwards to help with a "Good question",
especially to a nuggetty problem, because they're interested in the answer.
* Improve your chances of getting laid tonight by writing an SSCCE
- For you normal people, That's a: Short Self-Contained Compilable (Correct) Example.
- Short is sweet: No-one wants to wade through 5000 lines to find your syntax errors!
- Often you discover your own mistake whilst writing an SSCCE.
- Often you solve your own problem whilst preparing the SSCCE.
- Solving your own problem yields a sense of accomplishment, which makes you smarter ;-)
h5. Formatting Matters
* Post your code between a pair of {code} tags
- That is: {code} ... your code goes here ... {code}
- This makes your code easier to read by preserving whitespace and highlighting java syntax.
- Copy&paste your source code directly from your editor. The forum editor basically sucks.
- The forums tabwidth is 8, as per [the java coding conventions|http://java.sun.com/docs/codeconv/].
- Indents will go jagged if your tabwidth!=8 and you've mixed tabs and spaces.
- Indentation is essential to following program code.
- Long lines (say > 132 chars) should be wrapped.
* Post your error messages between a pair of {code} tags:
- That is: {code} ... errors here ... {code}
- OR: [pre]{noformat} ... errors here ... {noformat}[/pre]
- To make it easier for us to find, Mark the erroneous line(s) in your source-code. For example:
System.out.println("Your momma!); // <<<< ERROR 1
- Note that error messages are rendered basically useless if the code has been
modified AT ALL since the error message was produced.
- Here's [How to read a stacktrace|http://www.0xcafefeed.com/2004/06/of-thread-dumps-and-stack-traces/].
* The forum editor has a "Preview" pane. Use it.
- If you're new around here you'll probably find the "Rich Text" view is easier to use.
- WARNING: Swapping from "Plain Text" view to "Rich Text" scrambles the markup!
- To see how a posted "special effect" is done, click reply then click the quote button.
If you (the newbie) have covered these bases *you deserve, and can therefore expect, GOOD answers!*
h1. The pledge!
We the New To Java regulars do hereby pledge to refrain from flaming anybody, no matter how gumbyish the question, if the OP has demonstrably tried to cover these bases. The rest are fair game. -
Flash videos not playing correctly
I posted some flash videos to some sites that get a
tremendous amount of website traffic. We are getting feedback that
the flash videos do not play consitently. Some people can see them
just fine, others cannot see the videos at all, for others -
particulary in Firefox, the video asks to download rather than
play. We created the videos using Flash 9 - importing the FLV file
and saving as an swf. We do not really see any type of pattern
across browsers.
Any advice?Not loading correctly in what way?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
You can also try to reset the preferences.
*http://kb.mozillazine.org/Resetting_preferences
*https://support.mozilla.org/kb/Resetting+preferences
Maybe you are looking for
-
How do I transfer files from mac with snow leopard to a new retina display mac
What is the easiest way to transfer files from my old mac(2008) snow leopard to my new retina display mac book pro?
-
IDOC to JDBC Message is getting successfull in SXMB_moni
Hi EXperts, I have an source IDOC and target to JDBC and my message is getting successfull in MONI and i can not see any audit log in the reciever channel in communication channel monitoring(it is displaying yesterdays log and i can not see today
-
Captivate doesn't recognize my USB microphone
Hi there, I'm using Vista (32) with Captivate CS4. I have USB microphone (Sennheiser PC-166) that works beautifully with other applications, but I can't get Captivate to recognize it. When I configure settings...Captivate hears my default PC micropho
-
PO Open Interface Documentation
Can someone please point me to the correct Oracle reference documentation for the PO Open Interface (Import Standard Purchase Orders)? R12 version Thanks in advance! Barry Murphy Edited by: user4056426 on Mar 15, 2011 5:22 AM
-
Hi, Please tell me how to read the tkprof out put. what is difference between execute and fetch. Nilesh