IWeb won't display different Domains after upgrading to Lion?

After upgrading my MacBook Pro to Lion 10.7.2 my iWeb 3.0.4 program won't open different Domain files. Even though I have several different Domain files on the hard drive, no matter which one I try to open it always shows up as the last Domain opened by iWeb. If I remove the last opened Domain file from the hard drive and try to open one of the remaining files everything is OK, except if I again try to open a different Domain it also shows up as the last opened file.

Your unique question is often discussed.
Search this forum for Lion. You'll find this answer :
where do I find "domain" in Lion?
Or look to the right where it says : More Like This.
Or have a look at this movie :
http://www.wyodor.net/_Demo/Aptana/iWebSites.html
Or wait for our resident technology experts to provide the answers from the search.

Similar Messages

Preview 5.01 won't display JPEG's after upgrade to Snow Leopard

Upon upgrade of Snow Leopard 10.6 I cannot open a jpeg on Preview that has been submitted by someone to me. It shows up in the side column but not on the main page. how do I get to see the image again? thanks!

There are several possible problems, one of which can be solved to by updating to 10.6.2. You can also try removing these two files:
/Users/yourname/Library/Application Support/Preview/PDFIndex4.sk
/Users/yourname/Library/Preferences/com.apple.Preview.plist
Then restart and relaunch Preview. If it still isn't fixed, and you are updated to 10.6.2, then you should download the COMBO updater and run it. There is a link to download it here:
http://support.apple.com/kb/DL959
You can run it even if you have already updated.
Francine
Francine
Schwieder

After upgrading to lion my web server won't run

after upgrading to lion my web server won't run

From System Prefs clicking on Web Shareing wont start.
From the terminal attempting to run httpd gives me:
iBookWiz:~ steve$ sudo httpd
httpd: Syntax error on line 117 of /private/etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/mod_fastcgi.so into server: dlopen(/usr/libexec/apache2/mod_fastcgi.so, 10): image not found

After upgrading to Lion my videos have a codec error and won't play

After upgrading to Lion my videos have a codec error and won't play

Hi waiex,
I have recently upgraded to Lion and have the same problem as you. Did you find a solution?
Thanks in advance.

20" Apple Cinema Display not recognised after upgrading to OS 10.8.2 (Mountain Lion)

20" Apple Cinema Display not recognised after upgrading to OS 10.8.2 (Mountain Lion).
Hello Apple! Anybody there? How long does your community have to wait for a solution?
The same problem has been unsolved for months now. No statements from Apple either.
I was told today to wait for 10.8.3. This might solve the issue. I can not belive my ears.
My MacBookPro 4,1, Intel Core 2 Duo with 2.5 GHz Processor and Graphics chip: NVIDIA GeForce 8600M GT, will not talk to the exter. 20" Cinema Display ( Model Number A1081 ). The screen stays black. Resetting the PRAM did not help. I removed the 'com.apple.windowserver.plist' and the 'com.apple.windowserver.OE35739etc,etcxxxxxxxxxxx.plist', but that did not help either.
Any other solutions, or do I have to downgrade or give up on Apple Computers alltogether after using them for over 25 years?

I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

Macbook won't respond until moved, especially during authentication. Continued after upgrade to Lion.

My Macbook won't respond until I physically pick it up and move it, especially during authentication. This continues after upgrade to Lion. How can I resolve this?

This is almost certainly a hardware problem, that will require the skills of a certified Apple repair shop to fix.

After upgrading to lion, cant use TM

After upgrading to lion, I can't see any TM backups, and I do not have access to this external harddrive.
In the TM backup, I can see all backups, but cant activate or use them.
When I click to the external HD, an error message says: "The folder "" cannot be opend, because you do not have permission..."
I tried to solve problem as Apple given on website, but didnot help.
Thanks for help!

I had this same problem after I copied my TM backups from a 500GB TC to a larger external USB drive.
After some work, I finally was able to get the backups from the old TC to show up (in pink) on the new external drive, but still was unable to select/use the backups in pink.
After readings lots of the pondini posts, I saw some things that seem to get me access to the pink timeline items.
First, I read this post. At the beginning of it, it read...
Time Machine keeps the backups for each Mac separate, and normally only shows the ones for the Mac it's running on, even if there are other Macs' backups on the same disk/partition.
Also, sometimes Time Machine will start a new "sequence" of backups, as if they were from a different Mac.
To see these "other" backups, you need the Browse Other Backup Disks or (Browse Other Time Machine Disks) option. It's available by Alt/Option-clicking the Time Machine icon in your Menubar, or by right-clicking the Time Machine icon in your Dock.
At the end of the post (scroll to the blue box at the bottom), this also gave me an strategy...
If you've moved from a network location to local, Time Machine will usually continue backing up to the sparse bundle. But when you
Enter Time Machine, it will be looking for local backups. You'll have to manually mount the sparse bundle by double-clicking it in the Finder before entering Time Machine, and may need the Browse ... option.
These ideas helped me, as I am now able to access the pink backups in the timeline.

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
I had absolutely no problems before with Snow Loepard.
I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

After upgrade to Lion from Snow Leopard, my computer cannot shut down without using the on/off button in right side corner

Hi i have a macbook pro 15" from feb 2011. With snow leopard.
After upgrade to Lion, i canot shut down or restart.
I have to use the "on/off" bottom. in the right side of dashboard.
Have anyone any solution for that problem ?
Brian Steen

brian steen wrote:
I have once instlled a kind of antivirus, but i have removed it from programs to trash.
Gotcha, Bingo, Bazinga!
Moving the antivirus to trash does not delete or disable some parts of the application.
How to remove the remaining parts of the application depends on the application as the different AV-Systems place there parts at different places and use different preference files.
At first check if the AV is still listed in the startup items (System Settings - Accounts - your account - startup items) and remove them from that list.
Lupunus
PS ... about your Canon printer -> https://discussions.apple.com/thread/2657947?start=0&tstart=0
Message was edited by: lupunus (PS added)

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours. Help!

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
I tried quitting and starting again but it just jumps back to the same spot.

It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
(I was unable to seach properly before which is why I posted the question - it was a bit of a panic)

After upgrading to Lion, the Finder will increase the virtual memory while using external HD

after upgrading to Lion, the Finder will increase the "virtual memory size" while using external HD. I check it using Activity Monitor and found that "Finder" wll increase the "Virtual Memory Size" and "Private Memory Size". and then after a while. the system told me my HD is full and hanging there.
My External HD is 1TB. and I have installed new version Paragon NTFS for Mac V.9.01. I am not sure it is related or not.
but I attached my external HD. the "Finder" will start to increase the "Virtual Memory Size".
please help out this case and solve this issue.
thank you !!!

The one has nothing to do with the other. Virtual memory size and Private memory size are used by developers to analyze their software. it has nothing to do with anything related to the user.

I can't hear sound after upgrading to lion

I have this little annoying problem with my iMac after upgrading to Lion OSX. After waking up my iMac I can't hear any sound from internal speakers, ie: only video on Youtube, but no sound, but whilst pressing volume up/down button I can hear beep. When it happens So I have to restart system everytime it happens. Anyone any ideas or maybe someone out there has the same problem?

I'he double checked everything, only 1 output device (internal speakers). As I said before, it is weird because I can play iTunes and can hear "beep", but neither youtube sound, nor game sound or internet radio seems to be working, no sound whatsoever. But this time system didn't go to sleep, it has just happened suddenly.... Restart again then!

After upgrading to Lion, wifi seems to be much slower, is this caused by lion?

Hello All,
After upgrading to Lion, my MMA wifi seems to work much slower than before, and also the start up seems to be slower too. Is that caused by upgrading to Lion? Please help

Give it a few days and a dozen or so restarts.
The software may be updating Spotlight indexing and a few other "housekeeping" tasks.
My upgrade on a 2010 Air resulted in a slowdown at first, but then began to return to normal. At first, the boot time doubled, but within a couple of days, it was back to a 12 second boot.

After upgrading to lion Time Capsule is solid yellow

Hi
After upgrading to lion I am experiencing a lot of problems with time caspule
1. backup fail: it starts and than fails (error message and yellow warning triangle)
2. unable to connect to TC disk, neither from airport utility, nor from Finder
3. Airport Utility hangs while trying to manually modify configuration (rainbow weel).
After a lot of reboot, reset, disk rename, time capsule reconfiguration etc etc AND TC DISK REINITIALIZATION (ALLA BACKUP LOST!)
now backup seems to work and I can browse files in Time Machine
BUT
Time Capsule is a steady YELLOW and Airport utility says there is an error on disk (The disk is not working)
Can somebody help me.
This all happened after Lion installation. Not a problem before
Franco

Hi William
The disk is the internal Time Capsule Disk. It's a 1Tb model.
My iMac is localized in Italian
So I write here the Italian message and a possible translation
The first error message I get opening Airport Utility is:
Utility Airport ha trovato una Time Capsule 802.11n (2.a generazione) che segnala problemi
(AirPort Utility has found a Time Capsule 802.11n (2nd generation), which indicates problems)
If I press on "Continue" I enter a page that says
"Problema 1 di 1: Il disco Time Capsule non funziona"
(Problem 1 of 1: The Time Capsule Disk doesn't work)
"Si è verificato un problema con il Disco Time Capsule. Collega un disco rigido USB al tuo disco Time Capsule e utilizza il pannello Dischi di Utility Airport per archiviare i dati ed eseguire il backup."
(There was a problem with the Time Capsule disk. Connect a USB hard drive to your Time Capsule disk and use Disk Utility Airport panel to store data and run the backup.)
While if I go to the manual settings and I select the disk,
on the disk data info I have
Stato S.M.A.R.T.: Non funziona
(S.M.A.R.T status: Not working)
As I said before, apart from that problem, everything else (time machine, backups and file recovery) looks working good (until proven otherwise eh eh)
I don't know if to worry about the disk but I find suspicious that everything just started after Lion installation.
I called the call center and they just said to return the TC for disk repair (have to pay, warranty expired).
I told them about Lion installation fact and they said it looks like a coincidence but actually it is likely that after a disk initialization or a big amount of data writing the TC disk may break (WHAT ?!?) and the Apple guy even suggested me to buy an external disk that is less expensive and give less problem than a TC !!!!
(I can agree on that now, but I was surprised to hear that from them )
Thank you very much for any help.
I hope this info helps
Franco Andrea

IWeb won't display different Domains after upgrading to Lion?

Similar Messages

Maybe you are looking for