Iweb would not update the title

My iweb would not update the title of one of my website pages. All other updates went through but this one. I even deleted the page and did it again and it refuses to appear right after published. It also shows an error 404 in the page when published. Can anyone help? Thanks

Try clearing your browser's cache (Command+Option+E for Safari) and relaoding that one page.
OT

Similar Messages

  • Captivate 6 Not Updating Publishing Title

    Captivate 6 is not updating the title when publishing.  It IS updating the publishing location.
    I've tried doing "Save As" in a totally different folder, and it's still remembering the publish title from the original CPTX file that i copied.
    I've also tried a techniques from this forum, but to no avail.
    http://forums.adobe.com/thread/747950
    Anyone else experiencing this?
    Micky

    Hello Micky ,
    If you have already tried all the steps from the above thread shared by you, please try recreating the preferences:
    Location for Captivate Preferences folder is:
    Windows 7: C:\Users\[user name]\AppData (hidden folder)\Local\Adobe\Adobe Captivate 6 folder  
    Windows XP:  C:\Documents and Settings\[user name]\Local Settings\Application Data\Adobe\Adobe Captivate 6 folder        
    Mac:  /Users/[user name]/Library/Preferences/Adobe Captivate 6 folder
    You will have to close the Captivate 6 first and then rename the Captivate 6 folder to Captivate 6_OLD.
    PS: Recreating the preferences will reset all customizations, workspace and settings.
    Thanks and Regards
    Himanshu Satija

  • ITunes would not update Ipad soft, stating I don't have enogh space onthe PC for files, even though I just completely backed up Ipad through Itunes on the same PC. Seems like Itunes is disconected from itself.

    Itunes would  not update my Ipad soft citing insuficient space on PC to back up Ipad files. Even though I just baked up Ipad through Itunes on the very same PC.
    It seems that Itunes is disconected from itself and is not able to track processes within itself for the same device in the same session. Any solutions?

    Hello there, EllVar.
    The following Knowledge Base article offers some great recommendations for the issue you're describing:
    iOS: If you can't back up or restore from a backup in iTunes
    http://support.apple.com/kb/ts2529
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Hi - my Mu was "buggy" and would not update - so i threw the APP in the trash - but now CC will not allow me to Re-Install because it thinks i already have the APP - any advice?

    hi - my Mu was "buggy" and would not update - so i threw the APP in the trash - but now CC will not allow me to Re-Install because it thinks i already have the APP - any advice?

    restore your app from the trash and then properly uninstall.
    if that fails, CC desktop lists applications as "Up to Date" when not installed

  • Hello , Recently my company purchased a Fujifilm X30 . We were surprised that Adobe has not updated the plug in for this camera. Since we are your customers, we would like to know, when they will perform this update ? For us it is very important to work w

    Hello , Recently my company purchased a Fujifilm X30 . We were surprised that Adobe has not updated the plug in for this camera. Since we are your customers, we would like to know, when they will perform this update ? For us it is very important to work with all our tools work quickly and efficiently, I guess I understand.
    We await your response .
    Thank you very much .

    This is a user to user forum with "some" Adobe staff participation, make requests at this link
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Latest airport extreme would not update software from 7.7 factory installed to 7.7.1. keep getting an error of "An error occurred while downloading the firmware"

    latest apple extreme would not update software from 7.7 factory installed to 7.7.1. keep getting an error of "An error occurred while downloading the firmware"

    airport utility showed me these screens. this time able to post figs. but was able to update the software after couple of resets
    Fig. 1
    Fig. 2
    Fig. 3
    Fig. 4
    Fig. 5

  • I am having to reinstall itunes as it would not update to the lastest version but it wont install

    Hi I am having to reinstall itunes on my PC as it would not update to latest version and it wont now do this, just says there is an error

    Hello lindsay106,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Best of luck,
    Mario

  • My iweb would not publish. I made a desktop folder. How do I publish the folder to iweb on mobleme?

    My iweb would not publish, I made a desktop folder for my iweb pages. Now how do I publish that to mobile me?

    When you have iWeb open, in the navigation column at left, click first on the NAME of your site that you wish to publish -- when you do this, you should have the Site Publishing Settings show up in the main window at right.
    Next, from the popup choices next to "Publish to:" select MobileMe.
    If this is the first time you are doing this, you will need to type in your MobileMe account (name or email address), and make sure the proper email contact address is input, too.
    If your site will be public, you'll all set; if you need to apply privacy settings, you do so here, too.
    Now, click on the "Publish Site" button/icon at bottom in the toolbar, or select the same command from the menu bar in iWeb, under File. For the first time, you should choose "Publish Entire Site" (and be patient, it will take a while). Later, when you make changes, use the "Publish Site Changes" (much faster).
    When your site is published, iWeb will present you with a sheet window with options to immediate View your site online in your browser, announce it to others (via Mail), or just hit "OK."
    Gooooooooo iWeb!

  • Creative cloud wont work yet i am signed in and paid up. It started when my CC updater would not update

    It started when my CC updater would not update. I went to adobe help forums and ultimately began the uninstall/re-install process.  (Win) Troubleshooting Creative Cloud Connection update from 1.0 to 1.0.5 
    Now I can not locate a download for the CC updater. So i am now without a creative cloud connector.  I am still signed into LR however.

    Hi Ashley,
    Please refer the following solutions given in the article.
    Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
    Hope this helps.
    Regards,
    Sumit Singh

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • My IPhone is set up with an internet  downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro  within the phone. My computer will not accept the phone because they say it's a "Developer?"

    My IPhone is set up with an internet  downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro  within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.

    Hello buddyacw
    You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Received notice to update my I Tunes.  Would not update.  Error message read " I Tunes has an invalid signature"  never had an issue with updates till this notice.  What do i do to resolve this error?

    Received notice to update ITunes.  When downloading,  got error message "ITunes has an invalid signature" and would not update.  Never had an update issue until this download.  How do i rectify this error?

    Hi, bro2pro.
    I would recommend a complete uninstall as outlined in the article below.  Make sure to process the uninstall in the order specified. 
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    Once uninstalled, download iTunes directly from here iTunes 11.0.4 or iTunes.com.  Make sure to save the file to your desktop instead of selecting the run option.  Locate the file on your desktop, right click and select run as administrator.  This should allow the install. 
    Cheers,
    Jason H. 

  • Application Compatibility does not update the database.

    Hi,
     I am using application compatibility manager 6.1, and SQL server 2012 as database. ACT run ok and it create the XML file but it does not update the database at "C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA" location.
    I can see the valid XML file but somehow the MDF file of database is not updated so my ACT windows does not showing anything on it.
    Any Help would be appreciated.
    Thanks
    Rakesh Patel
    rakesh patel

    Hi Rakesh,
    I am not sure if you have resloved your issue.
    But for helping others to know what to do if they meet the same issue as yours, I consider to mark the post as answered.
    If you would like further assistance, please post back and we will be always here to help you.
    Any concern about this mark behavior, you can just unmark it.
    Thanks for your understanding.
    Regards,
    Kelvin hsu
    TechNet Community Support

  • Automatic Row Processing (DML) process is not updating the record

    Hi all,
    I have an application which was working fine last week and tested and backuped to new application. This Monday, one of the form in that application is not updating the data all of a sudden. I debug that by having page 0 variable and assign the value from the column variable to page 0 variable. Whatever value I changed to the column variable was getting updated to page 0 variable. But it is not updated in the database. So, I changed the success message of the "Automatic Row Processing (DML) process" and I can see the success message on the page, but the column value does not get updated. But when I go back and checked my backup application, that page is working fine. For now, I copy that from the backup application, but I would like to know why this is happening?
    Thanks
    SHY

    Hi Scott,
    Thank you very much for your response. Because of the database complexity, I can't create/import the application on the apex.oracle.com. I am just wondering why this is happening. One of my coworker said same thing happened to her in one of her project and it gets resolved once she restart the server. I am not able to restart the server to check and see if this resolved as the application is on the client server. Do we need to clean up any log file? Thanks.
    SHY

  • IWeb SEO not updating navigation bar

    Hi All,
    I have been working on my first website via iWeb (3.0.4 v601) and have been able to work through most of the issues encountered. The main one was the site name repeated in the address, so I researched the iWeb SEO that fixed that. i.e.
    www.thealleybarn.com/welcome.html was showing as www.thealleybarn.com/The_Alley_Barn/Welcome.html
    Today I made some updates to my site, including removing  a couple of blank pages and renaming another one. When publishing the site via iWeb SEO it is not updating the navigation bar. I have cleared my cache and double checked it on my phone (which had not viewed the site before) but it did not fix the issue.
    My website is: www.thealleybarn.com
    The menu should read: Welcome / The House / Beaches / Renovation / Contact
    However currently it reads: Welcome / The House / Beaches / Renovation / Things to do (blank page I deleted) / Location (I had renamed this to "contact")
    When not uploading it via the iWeb SEO (using the iweb ftp option) it actually looks ok, but then it has the name duplication issue, i.e. http://www.thealleybarn.com/The_Alley_Barn/Welcome.html
    This suggest that the files have been uploaded correctly, but its just not showing the right navigation bar when doing it via iWeb SEO. The other pages I updated are working ok, its just the menu that is the old one and not new one.
    Any help is greatly appreciated.
    Thanks

    Well yes, if you start using the iWeb ftp to upload your site after having used iWebSEO, then you will get your site name back again, because the iWeb ftp overrides what you have done with using iWebSEO - so once you use it you have to continue or iWeb itself will override. 
    You do state that you are using iWeb 08 however and iWeb 08 does not have the ftp included - this only applies to iWeb 09.
    What you can try however is not uploading your site using iWebSEO.  Rather, publish your site from iWeb to a local folder and then open your site with iWebSEO and then add what you want to but then when you are ready to upload, use something like Cyberduck instead - this is a dedicated ftp client - there is this or Yummy ftp.  Don't use iWebSEO to upload and see if using Cyberduck instead makes a difference.  Again, to get rid of the site name problem, just upload the contents of your site folder and NOT the whole site folder itself.

Maybe you are looking for