IWeb09 pages remain red after publishing

I recently updated to iWeb09 when I bought a new iMac. I moved my old iWeb08 files across from my old MacBook. While I was messing around with iWeb09, I changed the name of my site from the default Site to Southpaws. Ever since then, I cannot publish all of the pages on my site. Even after publishing the entire site - and receiving the confirmation message that the site has been published - many of the pages on the left remain red and are not published when I check on the internet. Does anyone have any solutions? Thanks very much.

If you search this forum for "red" or "red icon you'll find that this subject has been discussed at great length. Right not there is no tired and true fix. Some have found fixes for their situation but it didn't help others. Be sure to report this to Apple at http://www.apple.com/feedback/iweb.html.
OT

Similar Messages

Pages stay red after publishing

When I opened iWeb, all my published pages were red. I added a new blog and hit "Publish all to .mac." The publishing process starts, then the pages all turn blue and the little clocks start spinning. Then I get a "publishing error" and the pages all revert back to red. Sometimes it actually publishes, sometimes not, but the pages always revert to red.
I also seem to have lost the ability to use the "Add comments" field. Although I select it before publishing, it never appears. What's up?

We are having the same exact issues. I feel like iweb is a testing ground and that it doesn't really work. Everyone is making pages like they are talking to themselves but we never see each others websites.
Our pages are red too and we are getting an unknown error when publishing. One person from france said "reparing authorisations". What the heck does that mean.
Please contact us if yuo figure something out. We will do the same for you.
The red pages team

Pages not blue after publishing

I've published my site twice the page two days. Yesterday I could not get the site after publishing. The pages did not turn blue. Today I started over and published the entire site again. Got the notice my site had been published. Went to the site. All's ok there, but iWeb program has not turned the 'red' pages 'blue' indicating that they have been published. Should I publish again?

Le_Anne Brown wrote:
I looked but didn't find that discussion. Wrong search terms.
Rather than reading my reply only in email, look at the actual thread and you'll see it's a clickable link — so you don't need to search.
...But also searching should have found it — click here.

Blank pages in site after publishing

I'm officially frustrated. For some reason I have a couple pages that keep showing up blank in my web browser after being published in iweb. 90% of the pages work.
I have tried deleting entire site off idisk and republishing with "publish all"
I have updated iweb all the way.
I have duplicated the page in iweb and then deleting the original and renaming it the original.
I just can't figure it out.... Please help!
my website is http://www.ineed2changemylife.com
That is my personal domain, I have two sites linked to it.
Thanks in advance!

I'm seeing this too with a few of my pages, notably photo "Albums" pages. Everything publishes except for the albums themselves. Page is there. Header is there. But no albums.
Am I really paying for this?

Publishing site remains RED

I am trying to publish a site with 30 pages that include many photos. After about a half hour of publishing I receive the "Site successfully published" but the pages remain red and I am unable to visit those pages. I have deleted my iweb preferences in Library>Preferences and tried to republish but to no avail.
Anyone know what I can do to truly make this a successful publish? Thanks...

David ~ if you'd prefer not to wait for a possible solution here, MobileMe live chat support is now 24/7 — see this announcement. Other Apple support options are here.

Code added to template not working after publishing

We want to track the usage and see who is hitting the pages and where they are hitting them from. A developer at our company who wrote some code for us to be able to do this using an includes file. When we place the code directly into the HTM page using notepad (after publishing) it works fine. When we put the code into the template (.HTT) and then publish it, that code does not appear in the published page.
Is there a setting in the template that would not let us throw a line of code for a server side include in the RoboHelp WYSIWYG editor? Or how do you add such code to the template and have it pull into every page it displays?
Using RH8, publishing WebHelp and not using RH Server.
Thanks.

This question is related to webhelp, not Microsoft HTML Help (CHMs) so I have moved it.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

Want to play a video in pop up via a CEWP link in sp 2013 but facing issue after publishing the page pop up does not open

Hi All,
My Steps:-
0<sup>th</sup> Step:-
Upload a video in any doc library.
1<sup>st</sup> step:-
Add the uploaded link in App as per instruction
http://stevemannspath.blogspot.com/2012/12/sharepoint-2013-videos-in-sharepoint.html
2nd step:-
write this script in CEWP or in text and give reference to CEWP
<script type="text/javascript">
function OpenPage()
var options = SP.UI.$create_DialogOptions();
options.width = 850;
options.height = 700;
options.allowMaximize = true;
options.url="/sites/customer/VideoAsset/Forms/Video/videoplayerpage.aspx?ID=3&FolderCTID=0x0120D520A808003912E936CB74764285313433CC275AC3&List=b5087562-892a-417a-b02c-0d377d87f205&RootFolder=%2Fsites%2Fcustomer%2FVideoAsset%2FGrowth%5FDevelopment%2FAdditional%20Content&RecSrc=%2Fsites%2Fcustomer%2FVideoAsset%2FGrowth%5FDevelopment";
SP.UI.ModalDialog.ShowModalDialog(options);
</script>
<span class="s4-clust" style="display: inline-block; overflow-x: hidden; overflow-y: hidden;width: 10px; ; height: 10px; ">
<img src="/sites/customer/Style%20Library/Images/You_Tube.png" alt="" style="left: 0px !important; ; top: -128px !important; "/>
</span>
<text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">
</text>
<div class="secondary" style="padding-left: 3px;">
<a href="javascript:OpenPage()">Open</a>
</div>
I am getting error on below line-
var
options = SP.UI.$create_DialogOptions();
"object does not support this property and method"
Please help and let me know the solution.
sudhanshu sharma Do good and cast it into river :)

Also check if your javascript retains after Publishing. Sharepoint will remove malcious code/script html after saving the page and make page safe.
Regards,
Vaibhav Tikam
http://codepinch.blogspot.com
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever you see a reply being an answer to the question of the thread, click "Mark As Answer". It'll help other users who are visiting your thread for the
similar problem

Published iWebsite pages turn red when scrolling pages in iWeb

Hi everyone,
Just wondering if I'm the only person who has this issue; when I publish my iweb sites and pages (to MobileMe) all goes well, but when I then scroll my page up and down in iWeb the site turns red again as if I have changed its content.
I've tried the usual stuff (deleted caches, prefs, logged into MM under a bogus username and password) to check if the problem is a MM issue but this also occurs when I publish to a folder...
I've repaired disk permissions and did a fresh install of OS X (10.6.7) two weeks ago.
Does anyone have any other suggestions which might solve this issue? Or perhaps even the same problem?
cheers,
koen

Brilliant OT!
Although immediately posting to the discussions group says something about my personal opinion on the reliability of iWeb ... the problem was caused as you expected; the double digit finger action.
So 'no swiping in iWeb' I suppose.
The 'turning red' of published site pages was 100% reproducible by scrolling down using my trackpad, but it doesn't happen when I use my mighty mouse or the arrow buttons/scroll bar thing. (Even although nothing was selected in iWeb, bit of a bug if you'd ask me)
Thanks again for pointing out the logical and to me not so obvious
cheers,
koen

Web pages are different after I publish-hyperlinks off, and more...

I created eight web pages with hyperlinks on photos and text. The photo hyperlinks work, but the text links do not.
Some of my formatting has changed after publishing. Most common example, I have a thin, white line above several photos. I've tried several ways to correct the problems, all to no avail.
After I publish to a folder, how do I find the file size of what will be published?
Thank you, in advance.

Some of my formatting has changed after publishing.
Most common example, I have a thin, white line above
several photos. I've tried several ways to correct
the problems, all to no avail.
The easiest way to get rid of this white line...click on the affected photo, open up the Inspector and click on the Ruler tab. Now increase the height of the photo by one or two pixels. This should work.
The other method is to select the affected photo, open up the Inspector to the Shapes tab and change the opacity of the photo to 99%. This should also work.
Basically, both methods work by forcing iWeb to re-render the image as PNG by changing the photo ever so slightly.
After I publish to a folder, how do I find the file
size of what will be published?
After you publish to a folder, just select the folder in the Finder and type "Apple-i" to get the size of the folder. Is this what you are after?

Titles/Captions in Dutch remain in "Preview", but disappear (become defaults in English) after "Publish to Devices".

In my project all (sub)titles and captions (in Dutch) remain in "Preview", but disappear (become defaults in English) after "Publish for Devices".
How can I solve this?

Beste Lieve,
Cache geleegd, zonder dat er een project was geopend. CP vervolgens afgesloten.
Daarna in de map Utils de batch-file CleanPreferencesWin.bat gestart. Vervolgens CP weer gestart.
Nieuw project gemaakt met het volgende resultaat, zie afbeeldingen van achtereenvolgens:
1) de Slide
2) de Preview
3) het gepubliceerde project (Index.html)
Ik heb wel voor hetere vuren gestaan en ben nog te jong om er gek van te worden, maar dit is volgens mij out of my hands...
Groet,
Jan

After publishing page I get redirected to C Drive!

Hi - I can connect to the server, make and edit but after
publishing, Contribute redirects me to this page:
C:\Program Files\Adobe\Adobe Contribute
CS3\Configuration\Templates\Default.html
Please help! It's SO ANNOYING!
Thanks

I don't have the answer, but I put a short sentence in that
file you described and noticed the following:
1. I created a new blanc page
2. When I published this blank page the sentence I put in
C:\Program Files\Adobe\Adobe Contribute
CS3\Configuration\Templates\Default.html was visible for a very
short time
3. When I cancelled this blank page the sentence I put in
C:\Program Files\Adobe\Adobe Contribute
CS3\Configuration\Templates\Default.html was visible for a very
short time
It seems top me taht this delfault.html file is used to
create a blank page, but strangely the sentence I put in doesn't
appear visible ijn the draft or in the published new html file. My
version of Contribute doesn't hang on this page, but passes without
any problem to the page I created or the page I was when I
cancelled the new page.
Maybe you should contact Adobe and find out what the reason
is for calling this file or try to reinstall the program.

I'm using iweb 3.4 and trying to load audio files to my web page. everything looks good in iweb but after publishing instead of having a control bar i have a "?". does anyone know what to do?

I'm using iweb 3.4 and trying to load audio files to my web page. Everything looks good in iweb but after publishing instead of having a control bar i have a "?". Does anyone know what to do?

Where are you hosting the site, how are you uploading the files and what's the URL of your site so we can examine it first hand?
Adding audio files by dragging onto the web page forces the viewer to have Quicktime installed on their computer in order to be able to listen to them. Look at the audio player options on this page of Roddy's iWeb for Musicians site: Audio Players for your Music Website.
OT

Web pages are not automatically published. First they are saved as drafts with a .new extension.

Hi,
I am curently using adobe CS3. I am facing this strange
problem where my web pages are being saved with a .new extension
when I am tryign to publish. Everytime I need to go and change the
extension from .cfm.new to .cfm inorder to see the changes made to
the web page. I have even enabled the option so that contribute
does not send the page for reviewing before publsihing. Even after
enabling it I am facine the same problem. And this problem is being
faced by everyone who has publishing rights including the admin.
Can anyone please suggest a way to get rid of the .new extension
after publishing.
Your help will be greatly appreciated.
Thanks!

We, too, are having this problem. I see two posts in 2008-07 reporting this, but no answers and nothing via Google.
Details:
1. The web server is a Red Hat Linux / Apache.
2. It seems site-wide: several department webmasters have reported the problem. It may be limited to webs that are using Contribute and check-in/check-out.
3. The only thing I can think might be causing it is that our NTP daemon is broken, and the time of day drifted ~6 minutes (I have since reset the clock by hand).

Graphics look different after publishing

I am creating a new site and after publishing, the TIF images I use change color. I change the background color of the image which looks fine on iweb but different when published.
Any ideas on what I'm doing wrong?
Thanks for your advice in advance.

Phil:
I see all red links and only one has a mouse over action which is a green underline. Actually there are two that are just white text and not linked. You might try using the Publish all to .Mac menu option to force a rebuild of all the pages. That might do it.
OT

SITE name doesn't Changed after PUBLISHED

Hi,
Facing a serious problem.
I've Changed my Site name from 2008 to 2009.
after Published, when i click on Visit it shown as www.xxxx.com/2008 ,suppose s'ld be www.xxx.com/2009...what's the matter here?
And, After publishing successful, all the Items/Pages in my iWeb s'ld shown as BLUE But in my case it Shown RED, mean not publish yet at all...
Help Help, i really need help here...Urgent!!!
Thanks!!!

mactreouser wrote:
I've Changed my Site name from 2008 to 2009.
after Published, when i click on Visit it shown as www.xxxx.com/2008 ,suppose s'ld be www.xxx.com/2009...what's the matter here?
Try clearing your browser's cache and then visit your site again. If you're using Safari, click on the Safari menu and choose +Empty Cache...+

IWeb09 pages remain red after publishing

Similar Messages

Maybe you are looking for