IWindow problem In CS3

Hi,
InDesign creates and manages the associated window for the palette.
I want to Get pointer of that Window of My Palette.
How I can get that.
Can anybody help me.
Dattatray.

I think I found the best solution for this file (other than going over the seams with a partially transparent rubber stamp). I unchecked blend images together box in the interactive layout, and then blended each of the 4 sections two at a time (the top two, them merged them and auto blended the bottom right quarter, then did the same to the last left hand corner bit. I had to undo, then I repositioned the sections a couple times (after one section turned a lighter shade; or had a white line between it and the section it was meant to join) ...and then I retried the auto blend. It finally worked.

Similar Messages

  • Epson Printing Problem with CS3

    My Epson Stylus Pro 9600 has a problem with CS3 printing. When printing large images (i.e. 36x60) a portion of the image would be missing at the bottom (blank) The 10.01 update addressed this issue but it seems not completely. The problem was attributed to using a "Custom" print resolution however I still have this problem and after much testing I have narrowed it down to the "Finest Detail" check box under the custom, advanced tab. Checking this "Finest Detail" check box reproduces the problem.
    I'm not sure where the problem lies whether it be Photoshops new stripped down print code or Epsons drivers. For the mean time I will keep this feature de-selected. Hope this helps other frustrated Epson Owners.
    Vista 32, dual quad xeon 2.33
    Photoshop CS 3.3 Extended (Masters Collection)
    Epson Stylus Pro 9600, Drivers ver 5.52, current printer bios

    Adobe blamed Epson drivers for not anticipating CS3's changes. Like they're clairvoyant or something. Their reason was that it was too hard to take into account every printer on the market when writing the new (unasked for) CS3 printing module. A feeble excuse when it comes to Epson pro machinery, though - it is the industry standard, after all.
    Solution? - use CS2 for printing, authored back when Adobe wrote its software to be compatible with existing equipment and drivers, not expecting the world to fall into line with whatever it decided it would do. CS2 works flawlessly with my 7800, CS3 remains a basket case for the same reasons you mention, though checking/unchecking the fine detail box makes no difference. CS3 is erratic - sometimes it works as directed, but then out of nowhere it will suddenly decide to attenuate a pano print.
    We'll see if they get it right with CS4's "improved" printing, but don't hold your breath.

  • Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

    Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac? 

    Peggy
    You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
    Two more questions:
    1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
    2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
    Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
    Daveben

  • Problem installing CS3, being asked for CS4 disc

    Hi,
    I'm having problem reinstalling CS3, during the installation I'm being asked to insert CS4 disc. All I want is to reinstall CS3.
    Also, the liks to download CS3 products don't work.
    Anybody can help me with this? Thanks!

    Karniak which operating system are you using?  I would recommend removing any current installations for Adobe Creative products on your computer.  Once removed please use the CC Cleaner tool to insure complete removal.   You can find more information on the use of the CC Cleaner tool at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
    Once you have used the CC Cleaner Tool please reinstall CS3.  If you need a fresh copy of the installation files then you can download them from http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html.  Is this the same location you were attempting to download from previously?

  • Installation Problems - DW CS3

    Hi all
    I have tried to install DW Cs3 on my wintel box, I have
    removed DW8 from the system, cleaned any registry entries and
    common files in c:\ common files folder, deleted any refs to dw 8
    from docs settings applications etc etc etc before attempting an
    install, it can install all the adobe crap i don't want to have on
    my system, but can't choose not to install, but no dw components
    install, i have tried this reinstall many times with no
    firewall/virus checkers enabled every thing you could imagine I
    have tried
    Can someone point me in the right direction to get it
    happening?
    Cheers Ron

    I've had my own problems with CS3, but nothing like this. Are
    you
    installing from the DVD media? Try removing everyting and
    then download the
    trial and install that (it will be void of all the other
    stuff you don't
    want anyway). The Trial is actually the same as what comes on
    the DVD. You
    still need to provide your CD-Key to make it a full version.
    "oooh yeah" <[email protected]> wrote in
    message
    news:f1sk7o$1ba$[email protected]..
    Hi all
    I have tried to install DW Cs3 on my wintel box, I have
    removed DW8 from
    the
    system, cleaned any registry entries and common files in c:\
    common files
    folder, deleted any refs to dw 8 from docs settings
    applications etc etc etc
    before attempting an install, it can install all the adobe
    crap i don't want
    to
    have on my system, but can't choose not to install, but no dw
    components
    install, i have tried this reinstall many times with no
    firewall/virus
    checkers enabled every thing you could imagine I have tried
    Can someone point me in the right direction to get it
    happening?
    Cheers Ron

  • HT1338 We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

    We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

    Check the Adobe website for compatibility.
    Ciao.

  • Probleme mit CS3 nach Windows updates

    Hallo,
    Mein CS3 war registriert und lief sauber. Nach dem in den letzten Tagen zig Updates von Widows kamen und installiert wurden, will CS3 eine neue Registrierung.
    Aber wenn man online erneut registrieren klickt, passiert nichts.
    Im meinem Account bin ich angemeldet.
    Was tun, weiß jemand Rat?
    Beerchen

    Danke für die Antwort.
    So ganz genau kann ich es nicht nachvollziehen. Aber nachdem ich das Programm
    mit dem Task-Manager geschlossen habe, anders wollte es nicht.
    Und das Programm neu geöffnet habe hat es wieder funktioniert. Möglicherweise
    war mein PC ein wenig Durcheinander durch die 40 updates, obwohl ich mehrere
    Neustarts gemacht hatte.
    Vielen Dank für die Hilfe.
    Ich hätte aber noch ein 2. Problem.
    Mein Haupt-PC, ich habe 2, hat seinen Geist aufgegeben und ich würde gerne diese
    verlohrene Lizenz für mein Laptop nehmen, habe aber keine Ahnung wie.
    Wissen Sie wie ich die Lizenz deaktivieren kann und für mein Labtop aktivieren?
    Danke und schöne Feiertage,
    Dotthy
    Axel Matt <[email protected]> hat am 22. Dezember 2013 um 10:24
    geschrieben:
    Re: Probleme mit CS3 nach Windows updates
    created by Axel Matt <http://forums.adobe.com/people/Axel+Matt> in Deutsche
    Foren - View the full discussion
    <http://forums.adobe.com/message/5950983#5950983>

  • Probleme mit CS3 beta

    Hallo,
    ich habe Probleme bei der Installation von Photoshop CS3 beta. Leider kann ich die Lizenz nicht akzeptieren da ich keinen ok button habe. Ich weiß leider nicht weiter, habe ich schon meinen Windows installer aktualisiert.
    Bitte helft mir =)

    Danke für die Antwort.
    So ganz genau kann ich es nicht nachvollziehen. Aber nachdem ich das Programm
    mit dem Task-Manager geschlossen habe, anders wollte es nicht.
    Und das Programm neu geöffnet habe hat es wieder funktioniert. Möglicherweise
    war mein PC ein wenig Durcheinander durch die 40 updates, obwohl ich mehrere
    Neustarts gemacht hatte.
    Vielen Dank für die Hilfe.
    Ich hätte aber noch ein 2. Problem.
    Mein Haupt-PC, ich habe 2, hat seinen Geist aufgegeben und ich würde gerne diese
    verlohrene Lizenz für mein Laptop nehmen, habe aber keine Ahnung wie.
    Wissen Sie wie ich die Lizenz deaktivieren kann und für mein Labtop aktivieren?
    Danke und schöne Feiertage,
    Dotthy
    Axel Matt <[email protected]> hat am 22. Dezember 2013 um 10:24
    geschrieben:
    Re: Probleme mit CS3 nach Windows updates
    created by Axel Matt <http://forums.adobe.com/people/Axel+Matt> in Deutsche
    Foren - View the full discussion
    <http://forums.adobe.com/message/5950983#5950983>

  • Mouse pointer Problem with CS3 and windows 7

    Upgraded
    to a new PC which has Windows 7(32bit) as an operating system. Installed my Photoshop CS3 and everything seems ok except when I magnify in the navagator panel. Once I zoom in my mouse pointer changes to 3 hands in the navigator panel. I powered up my old laptop which has Vista and my CS3
    then matched up the mouse settings in the control panel on the new PC. Used the same usb mouse on both PC's, the older Vista laptop worked fine but the windows 7 PC would get a tripple pointer in the navigation panel when I magnified. In the windows 7 laptop I then set the compatibility for Photoshop CS3 to run in XP mode but the problem did not clear. I see in FAQ for CS4 people have complained about tripple cursers in windows 7 but the replies indicated that the recommended fix did not work. Any help apreciated.
    Tom

    Thanks for your solution. I by changing the setting to 125% I am now able to use CS3 without tripple pointers.
    My eyesight is challenged so the decrease in text is a challenge but I can change the setting when I will use CS3 so I have a workarount.
    Thanks,
    Tom

  • Problems Installing CS3 Web Premium on Windows Vista x64

    I was (key word) having problems with my installation of CS3 on my brand new (3 days old) computer with Windows Vista x64. Finally after two days of installing and uninstalling, I called Adobe support. I was pleasantly surprised with how quickly they solved my problem (if only I had called sooner).
    Having worked on this for 2 days I have seen and tried everything except of course the cure. So I wanted to put this out there for any one else that is having problems.
    The symptoms:
    - Everything seemed to install correctly (except acrobat which is another story. you can find lots of post about that.). No errors during installation. And when it finally completed installing, all that was left was to click "finish" which indicated to me that installation was successful.
    - Open Photoshop. PS would open and immediately stop working. Vista said it was not responding.
    - Open any of the other programs and the little vista circle would spin for 5 to 10 seconds then nothing. Program did not start to open. Just nothing.
    The problem: Unbeknown to me (never saw an error message) "Licensing for this product had stopped working". When I described above symptoms tech support went straight to this.
    The solution: Download the Licensing Service Update and run it. http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528
    Once I ran this, Photoshop opened and let me enter serial number and activate CS3.
    If after your installation, Photoshop or any of the other programs seem to get stuck or you never get the dialog box to enter serial number, the Licensing Service Update should fix things for you.

    wow...thank you so much for this posting. I just got home & followed your steps and now I have CS3 up & running. After 4 days of stressing out, finally someone was able to assist. Why can't the Adobe Experts & Employees on these forums supply this much needed information?????
    I seriously understand why people want to get crack versions of this software rather than paying hundreds of dollars like us and avoid all this BS and get no support whatsoever!
    Thank you again!!

  • Activation problems with CS3 and PS6

    I own CS3 standard edition for Windows. Recently I upgraded Photoshop only to CS6.
    All works well with PS/CS6. However, when I go back to use CS3 applications, the programs won't run. In Acrobat - the program I'm trying to run now - I get the error "Adobe Acrobat 8.1.3 cannot be launched..." and am told to open another CS3 program. I tried that, only to be told my CS3 is no longer registered.
    I got out the CS3 disks, entered the serial number, and am now told I have too many activations. This makes no sense at all, as I just removed CS3 from my laptop.
    Can someone tell me how I can run my CS3 programs with PS/CS6? I cannot afford to update the whole suite; that's just not an option.
    Thanks,
    Ed B

    Hi Ed B,
    First, if I understand your initial question, you have two fully purchased licensed Adobe products: CS3 Standard and PS6.  Second, you had CS3 installed on your desktop and laptop…within Adobe is licensing agreement.  Third, when you began to experiencing problems, you uninstalled CS3 from your laptop and proceeded to reregister CS3 on your desktop—I can help you with that.
    If you did not “deactivate” CS3 on your laptop prior to its uninstallation, it’s still showing as one of your two permissible registrations.  I ran into the same issue with CS5.5 after a rebuild.  I had to call Adobe licensing division and tell them what I did; they corrected my error on their part and I was good to go.  For future uninstalls:
    fire up any CS3 app
    click the Help button on the main menu
    select “Deactivate”
    then uninstall your product.
    Now, as to PS3 and PS6 being on the same system…there’s no problem.  Just make sure that PS6 has its own/correct license number.  To check this is the same method as when you deactivate:
    Open PS6
    click Help button
    select Activate and make sure the code displayed is correct, or put in the new product code. 
    After that, you should be good to go.
    Hope this helps.

  • Brightness/Contrast Problem in CS3 & CS2

    When I adjust (using legacy option) the sliders, then hit okay, the adjustments don't apply, and the image reverts to it's original state as if I hadn't adjusted the contrast or brightness at all. It did this in both CS3 & CS2. Has anyone else had this problem before?
    My workaround was to make a B/C adjustment layer and then merge visible to a new layer, but it did the exact same thing. The new merged layer didn't have the B/C applied to it. This is very strange.

    We should move on but calling someone rude because they misunderstood something and made a poor judgement is uncalled for.
    Moving on I think that the advice to use curve instead of B?C would offer better control
    As to why the adjustment layer you used did not have an effect as expected there may have been a small selection active when you invoked the layers adjustment everything seem to work but it is is only being applied to what might be a very small selection. Perhaps one you are accidentally creating. Check to see if you have a selection tool active and watch how you are moving the cursor.
    I hold the stylus in a funny way and sometimes make a selection and swear i am not touching the tablet with the stylus but on more careful observation or by just hitting escape or command D and then making the adjustment all is well.
    This might not be your problem but it is the only one I can think of at the moment.
    if this is the problem keep in mind this is not really a photoshop problem or solution and an unlikely scenario, even though it is a possible one.
    No one here would be expected to know this and of course it can be quite off base.

  • Flash image viewer, picture scale problem in CS3

    Please someone help me. I have built a website 3 years ago, and I still have this problem. In CS3 I added a flash image viewer (slideshow.swf) as a slideshow to show gardens we have made. When you first visit the site and look at the pictures (wich are bigger than the viewer window because of picture quality issues) they don`t shrink to fit into the viewer window, you only end up seeing a fraction of them. But when they download and you go back to see them again a second later, they become the right size. It also swiches to the right size when the loop play gets back to the first pic again.
    In the flash element properties I tried the different scale settings, and looked at other settings too but I couldn`t make it work.
    I think making the viewer window as large as the pictures, would look odd. Maybe buying on other slideshow program to insert into dreamweaver would work.
    If you would like to see the site its: tsugagardens.com , than look in the photo gallery and after the pics download go back with the back button and see the difference in the pics.
    Thank you for your efforts,
    Tibor

    function(){return A.apply(null,[this].concat($A(arguments)))}
    serestibi wrote:
    Please someone help me. I have built a website 3 years ago, and I still have this problem. In CS3 I added a flash image viewer (slideshow.swf) as a slideshow to show gardens we have made. When you first visit the site and look at the pictures (wich are bigger than the viewer window because of picture quality issues) they don`t shrink to fit into the viewer window, you only end up seeing a fraction of them. But when they download and you go back to see them again a second later, they become the right size. It also swiches to the right size when the loop play gets back to the first pic again.
    In the flash element properties I tried the different scale settings, and looked at other settings too but I couldn`t make it work.
    I think making the viewer window as large as the pictures, would look odd. Maybe buying on other slideshow program to insert into dreamweaver would work.
    If you would like to see the site its: tsugagardens.com , than look in the photo gallery and after the pics download go back with the back button and see the difference in the pics.
    Thank you for your efforts,
    Tibor
    Here is the code for the image viewer

  • FTP upload problems in CS3

    I'm using CS3 and have multiple sites w/ different servers,
    so I know this is not a server issue, as the problem happens with
    all of my sites. I know my FTP settings are correct as I've been
    using them for ages and haven't changed them. Starting yesterday,
    when I synchronize the local sites w/ the remote sites, everything
    works fine. But when I try to put just the index files, I get this
    type of error message:
    index.html - Put operation successful
    mm_spacer.gif - same - not transferred
    FPlogo.jpg - same - not transferred
    transparent.gif - same - not transferred
    ppalogo.png - same - not transferred
    palogo.png - same - not transferred
    Aug08cover.jpg - same - not transferred
    davincissm.png - same - not transferred
    amtalentsm.jpg - same - not transferred
    coverkids.jpg - same - not transferred
    vadentalsm.jpg - same - not transferred
    kidsnclay.jpg - same - not transferred
    Almy150.png - same - not transferred
    stc2.png - same - not transferred
    youngchefs.png - same - not transferred
    fusionhealth.png - same - not transferred
    wgrq.png - same - not transferred
    Thunder_new.jpg - same - not transferred
    I can put each one of those image files individually or
    during a site synchronization, but not as part of the index file.
    What happened and how can I fix it?

    I have just resolved my Dreamweaver FTP problem.
    For me, it was because Eset (Nod32) was interfering with
    uploading. If you have Nod32 protection, try this (if not, I'll
    have another method after):
    To fix, open ESET Set-Up (via the full tree) and scroll down
    to Personal Firewall > Protocol Filtering >
    In Protocol Filtering, un-check the Enable application
    protocol content filtering option.
    The other way to find out what might be interfering with your
    Dreamweaver's ftp function is turn off all but criticle services
    within your System Configuration (run> msconfig; or Ctrl R).
    FIRST, however, make a note of what items are checked on and that
    are not. Now...
    Select the Services Tab.
    Click "Hide all Microsoft Services"
    Click "Disable all" (but leave on FlexNet Licencing Service,
    along with your fingerprint reader access--if you have it)
    Click OKAY.
    Restart your system.
    If Dreamweaver FTP works, then you'll need to go back into
    MSCONFIG and systematically re-apply services that are not messing
    with your Dreamweaver. You should eventually isolate the problem
    this way.
    Lastly, Adobe has a tech article on Dreamweaver. Go to
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15481&sliceId=1
    That's all I know for now. Good luck.

  • Problems installing CS3 on laptop

    Hi
    Have CS3 installed on my PC running XP Pro without problem
    Have deactivated the instalation for the present time on the PC and I am trying to install on my laptop which
    is running vista home edition
    Once installed CS3 will not start - windows says program not responding, when you then try and restart CS3 it will not even load
    so have not even go to the stage where it is asking for activation key
    Things I have tried
    Completly removed instalation from laptop
    Run registry mechanic to ensure that no problems with registry
    Downloaded fresh version of CS3 and tried reinstalling again
    Run windows disk check to look for any bad sectors etc
    Have repeated the above exercise at least 4 times today all with the same result
    Anybody got any ideas
    Thanks Mel

    Hi David,
    Thanks for that rapid reply - Yes it was an Acer and the patch solved the problem
    Thank you for your help
    Mel

Maybe you are looking for