IWork '06  there's an Old and a New on my MBP

Looking down the Application list I have two iWork '06 folders with one of them saying 'from old Mac". I used Migration Assistant to transfer over. Both are the .0.1 variety. Software Update did v2 updates twice I think which I thought was odd.
Anybody know if I can trash the "from old Mac" versions? I use Pages regularly and it is the 'old' one that has the most recent "Last opened" date. I don't imagine I need both copies of both programs. Anyone with knowledge?
Oh, this is a new MPB 17 migrated from previous PB G4 17

Eddie,
Fire up the new version and make sure it works well. If so, then just drag the "from old Mac" folder to trash.
-Dennis

Similar Messages

  • The old and the new - how to do it? cross post in Community.linux-User International

    Hello,
    Currently I have Netware 6.5.7 SB suite/ has GroupWise.
    I want to move to the Linux platform with OES2/NOWS.
    The "Boss" wants to keep the current domain: [email protected]
    He wants to change it to a new web site domain name:
    [email protected]
    I already have the web site redirected.
    Type in old domain name and it goes to new domain name.
    He will however drop the old domain in a few months after all customers make
    the change.
    I am sure that this happens to many companies that change their domain name.
    How can I do this?
    Can I use my old server (GroupWise/Netware) with the old domain email
    addresses and the new Linux server with the new domain address at the same
    time?
    Alternatively, could somehow redirect all mail from the old email address to
    the new one?
    The problem is, I have a lot of email on the older Netware server that I
    still need.
    Could it be transferred to the Linux server?
    Any advice that you can provide will be appreciated very much.
    Thanks for your time,
    Jim
    RE:The old and the new - how to do it?

    Anders,
    That does not sound to hard ---
    I will look into that.
    Thanks!
    "Anders Gustafsson" <[email protected]> wrote in message
    news:[email protected]..
    > Jim,
    >> Can I use my old server (GroupWise/Netware) with the old domain email
    >> addresses and the new Linux server with the new domain address at the
    >> same
    >> time?
    >>
    > Basically yes, but what I would do is to set up groupwise to answer on
    > both
    > domain names. Then migrate the entire GW system to Linux. Ask in the
    > groupwise
    > forums of specifics.
    >
    > - Anders Gustafsson (Sysop)
    > The Aaland Islands (N60 E20)
    >
    >
    > Novell has a new enhancement request system,
    > or what is now known as the requirement portal.
    > If customers would like to give input in the upcoming
    > releases of Novell products then they should go to
    > http://www.novell.com/rms
    >

  • APP-PAY-06841: Person change exit between the old and the new date.

    Hi,
    Please help me by answering this question as very urgent basis.
    ABC employee Effective date should be of future dated 10-jan-2011.
    But ABC employee joining date has been entered on 10-Aug-2010.
    amd also this date is also ended by updating on 10-Dec-2010.
    But these records are wrong.This employee's effective date should be form 01-Jan-2011.
    how to datetrack.
    if iam changing the date bye keeping effective date as 10-Dec-2010 an an iam changing the record to 01-jan-2011,its throwing the error as "**APP-PAY-06841: Person change exit between the old and the new date**"
    Thanks&Regards,
    Sowmya.K

    What is the application release?
    Please see these docs.
    Error: APP-PAY-06841: Person changes exist between the old date and the new date [ID 399056.1]
    APP-PAY-06841 When Changing Latest Start Date Of An Employee Who Was An Ex-Contingent Worker [ID 1146414.1]
    Unable To Change Start Date for Employee, Get Error "APP-PAY-06841: Person Changes Exist Between The Old Date And The New Date" [ID 603233.1]
    Correcting Latest Start Date in People Screen Gives Error APP-PAY-06841 [ID 368289.1]
    How To Change the Latest Start Date of an Employee? [ID 329692.1]
    Thanks,
    Hussein

  • I generated a new Itunes Account and now the App sync. does not work with theapps I bought with the old account. Is it possible to merge the old and the new account ?

    I generated a new Itunes Account and now the App sync. does not work with the apps I bought with the old account. Is it possible to merge the old and the new account ?

    It is not possible to merge Apple IDs. 
    Why did you create a new one?

  • Macbook changes,paying the difference between the old and the new

    I am from Brazil,and I am going to Orlando. I have an old macbook and I would like to change the old macbook to a new one. I want to give my old and pay the difference between the old for the new.Could I do this,if yes,How it happens?
    Thank you

    it doesnt work that way.  Apple does not accept trades.  But they may give you a gift card: https://www.apple.com/recycling/gift-card/

  • SCOM 2012 R2 Agent Deployment - Uninstall Old and Install New

    By chance anyone come up with a scripted method for removing an existing SCOM 2012 SP1 agent and installing a new 2012 R2 agent? While I've come across a few scripts I'm trying to kill a few birds with one stone. This is a cross-domain attempt where the
    SCOM servers sit in one domain and the member servers are scattered across multiple domains. Member servers range from Windows Server 2003, 2008, and 2012. In most cases the servers have the 2012 SP1 agent installed and in some cases there are multiple management
    groups from previous SCOM standups. In addition there's a separate DEV SCOM 2012 R2 environment to manage DEV/QA servers. Active Directory Integration is configured and I have the necessary security groups created. There is a group policy created which is
    filtered to just that security group. So the plan is to simply drop the servers into the correct group and have the agent installed via group policy start up script. ADI should have DEV servers appear in DEV SCOM and PROD in PROD SCOM.
    Although there are ways to facilitate agent deployment via the console I need to perform a staged migration against a ton of server so as to not impact the existing production environment. So I'd rather do this remotely to pre-selected servers. This process
    should involve removing the existing agent, installing the new one, and if possible removing any existing management groups. So far I've come up with the following:
    Uninstall SCOM Agent:
    %WinDir%\System32\msiexec.exe /x <path>\MOMAgent.msi /qb
    Install SCOM Agent:
    msiexec.exe /i \\path\Directory\MOMAgent.msi /qn /l*v \logs\MOMAgent_install.log USE_SETTINGS_FROM_AD=0 MANAGEMENT_GROUP=<MG_Name> MANAGEMENT_SERVER_DNS=<MSDNSName> ACTIONS_USE_COMPUTER_ACCOUNT=0 ACTIONSUSER=<AccountUser> ACTIONSDOMAIN=<AccountDomain>
    ACTIONSPASSWORD=<AccountPassword>
    Remove Management Group via Script
    http://gallery.technet.microsoft.com/Remove-a-Management-group-336c849a/view/Discussions#content
    I'm guessing this wheel has already been invented or maybe there's a better way. So I'm open to ideas or suggestions.
    Any responses appreciated.

    Wow! 4 days and no responses, not good Microsoft SCOM Community. So here's a status on this issue.
    As stated I have Active Directory Integration configured which means:
    I see the OperationsManager container in AD: dev_scom
    I see the HealthService SCP and separate OU's for each of my management servers.
    I have an ADI security group containing my management servers and scom action account.
    I have an Agent security group which will contain servers the scom agent will be deployed via group policy.
    I also have an AD LDAP query set to target the SCOM agent group.
    (&(objectCategory=group)(name=DSCOM_ADI))
    I finally get the script to install via the following steps:
    Reference:
    http://technet.microsoft.com/en-us/library/cc754995.aspx
    http://technet.microsoft.com/en-us/library/cc770556.aspx
    http://blog.coretech.dk/msk/install-a-scom-2012-agent-silent/
    1. Launch Notepad ++ and enter the following:
    msiexec /i
    \\server.yourdomain.com\opsmgragent\%Processor_Architecture%\MOMAgent.msi USE_SETTINGS_FROM_AD=1 MANAGEMENT_GROUP=DEV_SCOM MANAGEMENT_SERVER_DNS=YourSCOMsrvr1.yourdomain.com ACTIONS_USE_COMPUTER_ACCOUNT=0 USE_MANUALLY_SPECIFIED_SETTINGS=0 ACTIONSUSER=svc_dscom
    ACTIONSDOMAIN=yourdomain ACTIONSPASSWORD=YourPassword! AcceptEndUserLicenseAgreement=1 /qn /l*v c:\scom2012r2mmainstall.log
    2. Save the script to a name of your choice. For me it's installdopsmgragent.cmd. Watch the extensions as you may end up saving it as installdopsmgragent.cmd.txt.
    Note: Make note of this steps in the reference articles listed above:
    "In the Add a Script dialog box, do the following:
    In the Script Name box, type the path to the script, or click Browse to search for the script file in the Netlogon shared folder on the domain controller."
    It's been a while since having to use a startup script so it took me a minute to figure this out. "getting too old 'fer this..."
    3. Copy the script to the Netlogon folder which is located in the following directory on my Windows 2012 server: E:\SYSVOL\sysvol\yourdomain.com\scripts
    4. Launch the group policy management console, create a new policy, edit it, and navigate to the following location:
    Computer Configuration > Policies > Windows Settings > Scripts (Startup/Shutdown)
    5. Double-click Startup to open the Startup Properties window.
    6. Click Add and browse to the location of the script which you copied to the Netlogon share.
    7. Click OK to close the Startup Properties window.
    8. Close the Group Policy Management Editor.
    9. Link the policy to an OU containing the servers.
    10. Add the SCOM Agent group to the Security Filtering area of the group policy. I also remove Authenticated Users.
    Note: make sure you have a few test servers in your Agent security group.
    11. Drop to a command line and run gpupdate /force. You can also use gpupdate /force /sync but you will have to reboot the box you're running this from.
    12. Log into one of the servers you have slated to deploy the agent to, drop to a command line, and run the same gpupdate command.
    13. Follow this with a gpresult /r command to ensure that you see the policy applied in the Computer Settings area.
    14. Reboot the server and you should see the startup script run.
    15. Log into the server and launch the Control Panel.
    16. If all went well you'll see the "Microsoft Monitoring Agent" icon.
    17. Launch Event Viewer, navigate to the Operations Manager events node located under Applications and Services Logs and validate the logs.
    17. If all didn't go well check the error log located, for me, on the C:\scom2012r2mmainstall.log
    My issue: I don't see the management info in the Agent properties.
    I installed this last night and waited until the next day still no changes. Event logs show the following:
    Event ID: 2011 The Health Service did not find any policy in Active Directory
    Event ID: 2003 No management groups were started.  This may either be because no management groups are currently configured or a configured management group failed to start.  The Health Service will wait for policy from Active Directory configuring
    a management group to run.
    I see the HealthService is Running in Task Manager on this server and of course I don't see anything listed in the Management Groups registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HealthService\Parameters\
    I don't want to manually add the management group info. Checking as I may have missed something in one of the switches. 
    Any responses appreciated.

  • Comparing the old and the new

    Would somebody be able to advise a new MBP owner on whether there is a huge difference is speed between
    Mid 2009 MBP 15" Core 2 Duo 2.66 w/8gb ram
    and
    Mid 2010 MBP 15" i5 2.53 w/4gb ram
    I work mainly in Adobe CS5 and have an opportunity to upgrade to the new model but with less ram, is it worth the move? Is there really that big a difference in speed between the two machine or is it just marketing hype.
    Any advice is welcome.
    Thanks

    Hi, Josh. The newer model uses the same RAM as the older one, so you could simply swap the RAM between the two machines and have 8GB in the new one. It would be perceptibly but not dramatically faster than the old. More importantly, it would be more future-proof than the old one: three years down the line, it's more likely to be able to run the newest versions of upgraded software than the Core 2 Duo is.

  • Old and a new iclould account

    my old email account is linked to my previous email account that I do not have access to.
    I am trying to delete it, but it keeps saying invalid password. How do I switch to the new account if I cannot access the old one?

    You can't and should NOT.
    There is no reason to EVER have another iTunes account or Apple ID.   You can change to Apple ID if your valid email address changes, but the account is still the same.
    I have 2 iPads, an iPod touch and all use the same Apple ID, but have different content. 
    Just set set up the phone as NEW with the ID you have now.
    Sync only the content you want onto the phone.

  • Error printing with Windows 7 even after unistallin​g old and installing new driver

    I recently updated to 64-bit Windows 7 and cannot get my HP OfficeJetJ4580 working after the upgrade.  I uninstalled all prior printer drivers and ran the recommended software from the HP site to ensure there were no remaining drivers on my system, then installed the updated drivers for use with WIndows 7.  The driver isntallation said it was successfula dn that my printer was ready for use.
    When I try to print, the job is sent to the print que.  The print que immedialtely notes "Error printing" and deletes the job from the que.  The printer never responds or tries to print.  This happens with anything I try to print, including a test page.  No error message is dispalyed on my screen.  The only way I can see the error is by opening up the print que and looking at the pending jobs.  I went to the HP support center and downloaded and ran the printer diagnostic sofware they had on there.  It could not detect any problems with the printer. 
    I am at a complete loss as to what to try next.

    Hello PPN, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are running into installation issues.  I would like to help.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I'd recommend putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    After the computer has been put in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HT201266 Any way to delete old and add new credit card pmt on iTunes without old card security code?

    Shredded old credit card because it expired.  It was the card used for iTunes purchases.  Cannot add new credit card info without first inputing security code from old card.  Any suggestions how to remove the card without the code?  Or perhaps add the new card and make it default payment method?

    Call and ask your credit card issuer.

  • Resetting old iPad and stop syncronization between the old and the new one.

    I have two iPads. They are synced. I want to remove some info from the old one and stop synchronization. How to do it?

    I would still erase the device and start all one again. The new user can still sign into the Apple ID and download all of the purchased content again and if you erase the device you don't have to worry about deleting the email accounts, the iCloud account and all of the private things that you don't want to share.
    But, if you don't want to erase the device, at the very least you will want to delete your iCloud account from the iPad and delete your email accounts as well. You don't want to sync contacts, calendars and those sorts of things with the new user - correct? So you might as well delete your iCloud account from the iPad. The new user can setup their own iCloud account if they want one. And obviously you want to remove your email accounts from the iPad  as well.

  • De-register old and register new ipad

    hello.  I'm selling my current ipad air and am buying a new one (more memory!).  How do I go about de-registering my current ipad, and registering my new one, when I get it?  Is there anything else I need to do with the current one before I sell it? thanks in advance.

    You can log out of your account on the iPad by tapping on your id in Settings > iTunes & App Store, and you can log out of iCloud via Settings > iCloud > Delete Account (with iOS 7 and Find My iPad an iPad will remain tied to an account unless you log out). You can then remove your content from it via Settings > General > Reset > Erase All Content & Settings
    But before you remove your content connect it to your computer's iTunes and do File > Devices > Transfer Purchases to copy all of your iTunes downloads over (no iTunes downloads are included in a device's backup, an iTunes backup picks them up from your iTunes library, a cloud restore will download those items that are still in your country's store and which can be redownloaded in your country), and take a backup (File > Devices > Back Up).
    You can remove the iPad from your account via https://supportprofile.apple.com/

  • What's the difference between the old and the new iPod touch?

    I havent seen any real upgrate on the new ipod touch other than the withe color. can anyone tell me whats the improvememt?

    If you have a G2 then there are differences. A much better processor, retina display, a camera and mic, IOS 5 etc..
    http://www.apple.com/ipodtouch/

  • I did the software update and now all the ATV does is have a blinking light.  On my TV there was the "notes" and the new cable shown.  I tried the restart (metal remote) Menu and down button and nothing happened.

    I did the software update and after downloading and loading the ATV just hung-up with a fast blinking white light on the front of ATV.  Tried a reset with the remote - Menu /downkey and nothing happened.  Is the software corrupt or did it wipe out my ATV?

    Apple TV 1st generation or 2nd?
    I would try plugging in the HDMI from the ATV to a different HDMI port on your TV and even trying the ATV on a different TV altogether...sounds like the HDMI port on your TV might be bad or a bad connection. Keep in mind you'll need to switch the TV input to the new HDMI port

  • How does one combine the history from two different profiles, so that my current profile will show both my old and my new history

    No details

    You can't do that.
    The best that you can do is to copy and paste the history items to a bookmarks folder and export the bookmarks to an HTML file.
    Then you can import that file in the other profile.
    If both profiles are on the same computer and are open at the same time then you can use the clipboard to do the C&P.
    http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

Maybe you are looking for