Iwork 09 chrash after start

All Iwork 09 apps chrashes when opening. Even on another account.
Somebody know how to fix it?
Mac info:
IMac G5 20'inch 2.0Ghz
1GB RAM
OS X Leopard 10.5.8

See if Peggy's answer helps...
iWork '09 crashes on launch / starting up
Did you install any Fonts lately?
http://www.mactalk.com.au/11/72737-iwork-09-apps-crashing-snow-leopard.html

Similar Messages

  • Is it possible to restore iWork package after a clean install system?

    Hello friends!
    Is it possible to restore the iWork package after a clean installation? To buy back in the store too expensive. MacBook Pro MB990, OS Lion 10.7.3.
    Thanks!

    Hi I was wondering the same thing, I want to restore my MacBook Pro to clean it up and start fresh but I am unsure if I can reinstall iWork agin from my disks? Also will I just be able to go on to the Mac app store and reinstall the apps I have purchased?
    Thanks!

  • Mail OS X 10.5.8 iMac crashes after starting

    Hello,
    My mail crashes almost immediately after starting, folder are lost but mails in inbox are available. Mail locks as soon as I start to use it, have to force a shut down. What bothers me is that mail has performed well a long time running on 10.8.5 and suddenly it collapsed.
    In terms of troubleshooting I've done the following so far:
    1. Created a new user and configured my mail account <mail operates again>
    2. Run the computer in safe mode using default user <mail chrashes>
    Comments and advice much appreciated.

    Might be corrupted Mail preferences ...
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following;
    ~/Library/Containers/com.apple.mail/Data/Library/Preferences/com.apple.mail.plis t
    Click Go then move the com.apple.mail.plist file to the Trash.
    Restart your Mac then try Mail.
    I'm having issues with the forum software.
    In the path above, it's   .plist   not   .plis t
    Sorry for the glitch.

  • I cannot open iWork '06 after successful download.

    I have finally successfully downloaded iWork'06, after going through all the steps in forum discussion, and the program will not open in order to let me register or
    use the application. When I double click on either the Pages icon or Keynotes, the icon appears for a fraction of a second and then vanishes. The computer makes a noise like it is trying to start something up and then stops. I had the trial offer of iWork in my initial software bundle. When I bought the new disc, I removed the trial one. I even tried to re download the bundled software that came with computer, but I am getting errors while downloading messages. What next?
    IMac   Mac OS X (10.4.6)  

    Mac,
    Welcome to Apple discussions.
    When you bought the new version of iWork, you didn't need to trash the trial version. What you could have done was to launch the trial version, then use the serial number from the purchased version. File that under closing the barn door after the horse has escaped. My guess is that when you trashed the trial version, you left some stray files around, specifically receipts and plist files. When you installed the new version, it "saw" some of these files and didn't completely install itself, thinking it was already installed.
    My suggestion: do a Spotlight search on iWork, Pages and Keynote, then trash everything you find, and start over with the installation. It ought to work then.
    -Dennis

  • Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing!

    Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • HT204053 i'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't upadte my free software, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOTOWNED THE MAJOR VERSION OF THIS SOFTWARE" so how I ca

    I'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't update my free software downloaded on both, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOT OWNED THE MAJOR VERSION OF THIS SOFTWARE" so how i can update my softwares on ipad & ipod using the same apple id

    I think the issue is that iTunes (for whatever reason) thinks I have two Apple ID's.
    also, to further complicate the issue, when i try updating the apps from my iPod the iTunes store is still recognizing my old hotmail Apple ID. So when I go to enter my password it won't accept because it doesn't match with the old Apple ID, even though it is the same account (just new Apple ID name).
    I have tried signing out within the App Store and re-signing in with my Apple ID but it still brings up my old Apple ID name when I try to update.

  • After starting a new account. How do I get my old music back from the first account?

    After starting a new account because I was unable to get my old id and password, I would like to know how to get my music back from the first account?

    Click here and request assistance.
    (79128)

  • Dispatcher stops after starting SAP and turning from green to  grey

    After starting SAP on the SAP Console, the dispatcher turns from green to grey and logging on to SAP is not possible. Below is the developer trace file for the process:
    SAPPRD\saploc\PRD\DVEBMGS00\work\dev_disp
    trc file: "dev_disp", trc level: 1, release: "640"
    Tue Mar 27 14:47:21 2007
    kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
    length of sys_adm_ext is 312 bytes
    systemid   560 (PC with Windows NT)
    relno      6400
    patchlevel 0
    patchno    43
    intno      20020600
    make:      multithreaded, ASCII
    pid        3732
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3732) [dpxxdisp.c   1100]
         shared lib "dw_xml.dll" version 43 successfully loaded
         shared lib "dw_xtc.dll" version 43 successfully loaded
         shared lib "dw_stl.dll" version 43 successfully loaded
         shared lib "dw_gui.dll" version 43 successfully loaded
    Tue Mar 27 14:47:34 2007
    WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0000.qqq.nxst) took 13 seconds
    Tue Mar 27 14:47:51 2007
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS
    settings [dpxxtool2.c  3886]
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: JAVA is not active
    DpShMCreate: sizeof(wp_adm)          21528     (828)
    DpShMCreate: sizeof(tm_adm)          2219848     (11044)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)          192000     (384)
    DpShMCreate: sizeof(vmc_adm)          0     (320)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 04BA0040, size: 2520320)
    DpShMCreate: allocated sys_adm at 04BA0040
    DpShMCreate: allocated wp_adm at 04BA17A8
    DpShMCreate: allocated tm_adm_list at 04BA6BC0
    DpShMCreate: allocated tm_adm at 04BA6BE8
    DpShMCreate: allocated wp_ca_adm at 04DC4B30
    DpShMCreate: allocated appc_ca_adm at 04DC9180
    DpShMCreate: allocated comm_adm_list at 04DCA8F0
    DpShMCreate: allocated comm_adm at 04DCA908
    DpShMCreate: allocated vmc_adm_list at 04DF9708
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 04DF9730
    DpShMCreate: allocated wall_adm at 04DF9738
    MBUF state OFF
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 2264 blocks reserved for free list.
    ES initialized.
    Tue Mar 27 14:47:52 2007
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( SAPPRD) [dpxxdisp.c   9736]
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 43
    Release check o.K.
    Tue Mar 27 14:48:32 2007
    ERROR => W0 (pid 5396) died [dpxxdisp.c   12187]
    ERROR => W1 (pid 1536) died [dpxxdisp.c   12187]
    ERROR => W2 (pid 5404) died [dpxxdisp.c   12187]
    ERROR => W3 (pid 1520) died [dpxxdisp.c   12187]
    ERROR => W4 (pid 4208) died [dpxxdisp.c   12187]
    ERROR => W5 (pid 3584) died [dpxxdisp.c   12187]
    ERROR => W6 (pid 4512) died [dpxxdisp.c   12187]
    ERROR => W7 (pid 5484) died [dpxxdisp.c   12187]
    ERROR => W8 (pid 5488) died [dpxxdisp.c   12187]
    ERROR => W9 (pid 5500) died [dpxxdisp.c   12187]
    ERROR => W10 (pid 888) died [dpxxdisp.c   12187]
    ERROR => W11 (pid 5512) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W12 (pid 5520) died [dpxxdisp.c   12187]
    ERROR => W13 (pid 5528) died [dpxxdisp.c   12187]
    ERROR => W14 (pid 5532) died [dpxxdisp.c   12187]
    ERROR => W15 (pid 5536) died [dpxxdisp.c   12187]
    ERROR => W16 (pid 5468) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W17 (pid 5564) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W18 (pid 1676) died [dpxxdisp.c   12187]
    ERROR => W19 (pid 5652) died [dpxxdisp.c   12187]
    ERROR => W20 (pid 4704) died [dpxxdisp.c   12187]
    ERROR => W21 (pid 1796) died [dpxxdisp.c   12187]
    ERROR => W22 (pid 5568) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W23 (pid 6084) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W24 (pid 5704) died [dpxxdisp.c   12187]
    ERROR => W25 (pid 3580) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    killing W0-5396 (SIGUSR2)
    ERROR => DpWpKill(5396, SIGUSR2) failed [dpxxtool.c   2468]
    killing W1-1536 (SIGUSR2)
    ERROR => DpWpKill(1536, SIGUSR2) failed [dpxxtool.c   2468]
    killing W2-5404 (SIGUSR2)
    ERROR => DpWpKill(5404, SIGUSR2) failed [dpxxtool.c   2468]
    killing W3-1520 (SIGUSR2)
    ERROR => DpWpKill(1520, SIGUSR2) failed [dpxxtool.c   2468]
    killing W4-4208 (SIGUSR2)
    ERROR => DpWpKill(4208, SIGUSR2) failed [dpxxtool.c   2468]
    killing W5-3584 (SIGUSR2)
    ERROR => DpWpKill(3584, SIGUSR2) failed [dpxxtool.c   2468]
    killing W6-4512 (SIGUSR2)
    ERROR => DpWpKill(4512, SIGUSR2) failed [dpxxtool.c   2468]
    killing W7-5484 (SIGUSR2)
    ERROR => DpWpKill(5484, SIGUSR2) failed [dpxxtool.c   2468]
    killing W8-5488 (SIGUSR2)
    ERROR => DpWpKill(5488, SIGUSR2) failed [dpxxtool.c   2468]
    killing W9-5500 (SIGUSR2)
    ERROR => DpWpKill(5500, SIGUSR2) failed [dpxxtool.c   2468]
    killing W10-888 (SIGUSR2)
    ERROR => DpWpKill(888, SIGUSR2) failed [dpxxtool.c   2468]
    killing W11-5512 (SIGUSR2)
    ERROR => DpWpKill(5512, SIGUSR2) failed [dpxxtool.c   2468]
    killing W12-5520 (SIGUSR2)
    ERROR => DpWpKill(5520, SIGUSR2) failed [dpxxtool.c   2468]
    killing W13-5528 (SIGUSR2)
    ERROR => DpWpKill(5528, SIGUSR2) failed [dpxxtool.c   2468]
    killing W14-5532 (SIGUSR2)
    ERROR => DpWpKill(5532, SIGUSR2) failed [dpxxtool.c   2468]
    killing W15-5536 (SIGUSR2)
    ERROR => DpWpKill(5536, SIGUSR2) failed [dpxxtool.c   2468]
    killing W16-5468 (SIGUSR2)
    ERROR => DpWpKill(5468, SIGUSR2) failed [dpxxtool.c   2468]
    killing W17-5564 (SIGUSR2)
    ERROR => DpWpKill(5564, SIGUSR2) failed [dpxxtool.c   2468]
    killing W18-1676 (SIGUSR2)
    ERROR => DpWpKill(1676, SIGUSR2) failed [dpxxtool.c   2468]
    killing W19-5652 (SIGUSR2)
    ERROR => DpWpKill(5652, SIGUSR2) failed [dpxxtool.c   2468]
    killing W20-4704 (SIGUSR2)
    ERROR => DpWpKill(4704, SIGUSR2) failed [dpxxtool.c   2468]
    killing W21-1796 (SIGUSR2)
    ERROR => DpWpKill(1796, SIGUSR2) failed [dpxxtool.c   2468]
    killing W22-5568 (SIGUSR2)
    ERROR => DpWpKill(5568, SIGUSR2) failed [dpxxtool.c   2468]
    killing W23-6084 (SIGUSR2)
    ERROR => DpWpKill(6084, SIGUSR2) failed [dpxxtool.c   2468]
    killing W24-5704 (SIGUSR2)
    ERROR => DpWpKill(5704, SIGUSR2) failed [dpxxtool.c   2468]
    killing W25-3580 (SIGUSR2)
    ERROR => DpWpKill(3580, SIGUSR2) failed [dpxxtool.c   2468]
    NiWait: sleep (10000 msecs) ...
    NiISelect: timeout 10000 ms
    NiISelect: maximum fd=1521
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Mar 27 14:48:42 2007
    NiISelect: TIMEOUT occured (10000 ms)
    dump system status
    Workprocess Table (long)               Tue Mar 27 13:48:42 2007
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action   
                    Table
    0 DIA     5396 Ended         no      1   0             0                                   
    1 DIA     1536 Ended         no      1   0             0                                   
    2 DIA     5404 Ended         no      1   0             0                                   
    3 DIA     1520 Ended         no      1   0             0                                   
    4 DIA     4208 Ended         no      1   0             0                                   
    5 DIA     3584 Ended         no      1   0             0                                   
    6 DIA     4512 Ended         no      1   0             0                                   
    7 DIA     5484 Ended         no      1   0             0                                   
    8 DIA     5488 Ended         no      1   0             0                                   
    9 DIA     5500 Ended         no      1   0             0                                   
    10 DIA      888 Ended         no      1   0             0                                   
    11 DIA     5512 Ended         no      1   0             0                                   
    12 UPD     5520 Ended         no      1   0             0                                   
    13 UPD     5528 Ended         no      1   0             0                                   
    14 UPD     5532 Ended         no      1   0             0                                   
    15 UPD     5536 Ended         no      1   0             0                                   
    16 UPD     5468 Ended         no      1   0             0                                   
    17 ENQ     5564 Ended         no      1   0             0                                   
    18 BTC     1676 Ended         no      1   0             0                                   
    19 BTC     5652 Ended         no      1   0             0                                   
    20 BTC     4704 Ended         no      1   0             0                                   
    21 BTC     1796 Ended         no      1   0             0                                   
    22 BTC     5568 Ended         no      1   0             0                                   
    23 SPO     6084 Ended         no      1   0             0                                   
    24 UP2     5704 Ended         no      1   0             0                                   
    25 UP2     3580 Ended         no      1   0             0                                   
    Dispatcher Queue Statistics               Tue Mar 27 13:48:42 2007
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    3
    2000
    10
    10
    --------++++--
    +
    DIA
    6
    6
    2000
    6
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          14
    wake_evt_udp_now     0
    wake events           total     9,  udp     8 ( 88%),  shm     1 ( 11%)
    since last update     total     9,  udp     8 ( 88%),  shm     1 ( 11%)
    Dump of tm_adm structure:               Tue Mar 27 13:48:42 2007
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    RM-T26, U27,     , SAPPRD, 14:48:24, M0, W-1,     , 1/0
    Workprocess Comm. Area Blocks               Tue Mar 27 13:48:42 2007
    =============================
    Slots: 300, Used: 2, Max: 1
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    1
    DISPATCHER
    -1
    WPCAAD001
    NiWait: sleep (5000 msecs) ...
    NiISelect: timeout 5000 ms
    NiISelect: maximum fd=1521
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Mar 27 14:48:47 2007
    NiISelect: TIMEOUT occured (5000 ms)
    Shutdown server ...
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes...
    Stop gateway
    killing process (1844) (SOFT_KILL)
    Stop icman
    killing process (5376) (SOFT_KILL)
    Terminate gui connections
    send SHUTDOWN to REM TM 26
    blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
    LOCK WP ca_blk 2
    return errno (-17) to T26
    errormsg without overhead: take mode 0
    NiBufIAlloc: malloc NiBufadm, to 0 bytes
    try to send 14 to M0
    NiBufSend starting
    NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
    REL WP ca_blk 2
    set status of T26 to TM_DISCONNECTED
    NiSelClear: removed hdl 7 from selectset
    DpDelSocketInfo: del info for socket 7 (type=3)
    NiBufClose: clear extensions for hdl 7
    NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 7 / socket 1216
    dp_tm_adm[26].stat = DP_SLOT_FREE
    DpGetSchedule: next schedule 1175003332
    DpGetSchedule: no schedule found
    DpITmSlotRelease: release slot 26
    DpListInsert: insert elem 26 into tmadm_free_list (at begin)
    DpListInsert: 175 elems in tmadm_free_list
    DpListRemove: remove elem 26 from tmadm_inuse_list
    DpListRemove: 26 elems in tmadm_inuse_list
    [DpProcDied] Process lives  (PID:1844  HANDLE:1500)
    waiting for termination of gateway
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=1521
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Mar 27 14:48:48 2007
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process died  (PID:1844  HANDLE:1500)
    [DpProcDied] Process died  (PID:5376  HANDLE:1492)
    DpHalt: cancel all lcom connections
    MPI CancelAll 2 -> 0
    MPI DeleteAll 2 -> 0
    NiIMyHostName: hostname = 'SAPPRD'
    AdGetSelfIdentRecord: >                                                                     
         <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 163 bytes
    NiBufSend starting
    NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name          -, type 4, key -
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9962]
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiSelClear: removed hdl 3 from selectset
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                     
         <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
    LOCK WP ca_blk 2
    make DISP owner of wp_ca_blk 2
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
    MBUF component DOWN
    NiBufClose: clear extensions for hdl 3
    NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 3 / socket 1504
    MsIDetach: detach MS-system
    EsCleanup ....
    ***LOG Q05=> DpHalt, DPStop ( 3732) [dpxxdisp.c   8495]
    Good Bye .....

    what is the name of your hostname? 'pun-idmqa-vm1'?
    Try changing the hostname for another one with 8 characters...
    good luck,

  • Could not retrieve the in-memory service URL after starting the in-memory.

    A local jvm process is discovered but mission control will not connect.
    Both jvm process and mission control are on the same host.
    Any suggestion?
    Thanks.
    This is the mission control help version:
    Oracle® JRockit Mission Control 3.1.0 (R27.6.3-40_o, 112101)
    I'm running mission control and a jboss web server on jrockit:
    $ java -version
    java version "1.6.0_11"
    Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
    BEA JRockit(R) (build R27.6.3-40_o-112056-1.6.0_11-20090318-2103-linux-x86_64, compiled mode)
    On linux:
    $ uname -a
    Linux isidore 2.6.27-11-generic #1 SMP Wed Apr 1 20:53:41 UTC 2009 x86_64 GNU/Linux
    This is the message that appears in the controlling tty window:
    Apr 24, 2009 9:55:43 PM com.jrockit.mc.browser.attach.LocalConnectionDescriptor tryJRCMDStyleStartingOfTheAgent
    SEVERE: Could not retrieve the in-memory service URL after starting the in-memory agent!
    Apr 24, 2009 9:55:43 PM com.jrockit.mc.browser.attach.LocalConnectionDescriptor tryJRCMDStyleStartingOfTheAgent
    Here is the exception in the dialog details:
    Could not open Management Console for [1.6] JBoss (5,474).
    java.lang.NullPointerException: null
    java.lang.NullPointerException
         at com.jrockit.mc.rjmx.ConnectionDescriptorToolkit.getHostName(ConnectionDescriptorToolkit.java:152)
         at com.jrockit.mc.rjmx.internal.RJMXConnection.setupServer(RJMXConnection.java:521)
         at com.jrockit.mc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:144)
         at com.jrockit.mc.rjmx.internal.RJMXConnectorModel.establishConnection(RJMXConnectorModel.java:111)
         at com.jrockit.mc.rjmx.internal.RJMXConnectorModel.connect(RJMXConnectorModel.java:154)
         at com.jrockit.mc.rjmx.ConnectionManager.innerConnect(ConnectionManager.java:95)
         at com.jrockit.mc.rjmx.ConnectionManager.connect(ConnectionManager.java:61)
         at com.jrockit.mc.console.ui.actions.StartConsole$1.preConnect(StartConsole.java:38)
         at com.jrockit.mc.browser.utils.PreConnectJob.run(PreConnectJob.java:74)
         at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)

    After I posed the above, I saw that the url on the exception is munged.
    I didn't stumble over how to manually override that url.
    Instead, I added remote jmx capability to the process and added a connector. That is my work around.
    Thanks,
    John

  • A few seconds after start the GDM mouse stops working

    After today's update I have the following problem: a few seconds after start the GDM mouse stops working. XDM doesn't work.
    Edited: Mouse works. Only pointer does not move.
    lscpi says:
    00:02.0 VGA compatible controller: Intel Corporation 82946GZ/GL Integrated Graphics Controller (rev 02)
    gdm says:
    usb 2-2: new low speed USB device using uhci_hcd and address 4
    input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
    generic-usb 0003:04B3:310C.0003: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
    [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
    [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1071 at 650, next 1076)
    (this line is repeated several times:)
    [drm:i915_do_wait_request] *ERROR* something (likely vbetool) disabled interrupts, re-enabling
    [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
    [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1079 at 650, next 1080)
    [drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged!
    [drm:i915_reset] *ERROR* Failed to reset chip.
    /var/log/Xorg.0.log says:
    [ 23.129]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 23.129]
    X.Org X Server 1.9.3.901 (1.9.4 RC 1)
    Release Date: 2011-01-07
    [ 23.129] X Protocol Version 11, Revision 0
    [ 23.129] Build Operating System: Linux 2.6.36-ARCH i686
    [ 23.129] Current Operating System: Linux mariuszch 2.6.37-ARCH #1 SMP PREEMPT Sat Jan 29 19:40:04 UTC 2011 i686
    [ 23.129] Kernel command line: root=/dev/disk/by-uuid/3e82e71b-7de4-406d-8da9-8101fe4a713f ro i915.modeset=1
    [ 23.129] Build Date: 08 January 2011 11:27:31PM
    [ 23.129]
    [ 23.130] Current version of pixman: 0.20.2
    [ 23.130] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 23.130] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 23.131] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 31 09:24:08 2011
    [ 23.163] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 23.206] (==) No Layout section. Using the first Screen section.
    [ 23.206] (==) No screen section available. Using defaults.
    [ 23.206] (**) |-->Screen "Default Screen Section" (0)
    [ 23.206] (**) | |-->Monitor "<default monitor>"
    [ 23.206] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 23.206] (==) Automatically adding devices
    [ 23.206] (==) Automatically enabling devices
    [ 23.260] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 23.260] Entry deleted from font path.
    [ 23.295] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 23.295] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 23.295] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 23.295] (II) Loader magic: 0x81f3160
    [ 23.295] (II) Module ABI versions:
    [ 23.295] X.Org ANSI C Emulation: 0.4
    [ 23.295] X.Org Video Driver: 8.0
    [ 23.295] X.Org XInput driver : 11.0
    [ 23.295] X.Org Server Extension : 4.0
    [ 23.296] (--) PCI:*(0:0:2:0) 8086:2972:17aa:1015 rev 2, Mem @ 0xd0000000/1048576, 0xc0000000/268435456, I/O @ 0x000018c0/8
    [ 23.296] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 23.296] (II) LoadModule: "extmod"
    [ 23.306] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 23.314] (II) Module extmod: vendor="X.Org Foundation"
    [ 23.314] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.314] Module class: X.Org Server Extension
    [ 23.314] ABI class: X.Org Server Extension, version 4.0
    [ 23.314] (II) Loading extension MIT-SCREEN-SAVER
    [ 23.314] (II) Loading extension XFree86-VidModeExtension
    [ 23.314] (II) Loading extension XFree86-DGA
    [ 23.314] (II) Loading extension DPMS
    [ 23.314] (II) Loading extension XVideo
    [ 23.314] (II) Loading extension XVideo-MotionCompensation
    [ 23.314] (II) Loading extension X-Resource
    [ 23.314] (II) LoadModule: "dbe"
    [ 23.314] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 23.320] (II) Module dbe: vendor="X.Org Foundation"
    [ 23.320] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.320] Module class: X.Org Server Extension
    [ 23.320] ABI class: X.Org Server Extension, version 4.0
    [ 23.320] (II) Loading extension DOUBLE-BUFFER
    [ 23.320] (II) LoadModule: "glx"
    [ 23.320] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 23.337] (II) Module glx: vendor="X.Org Foundation"
    [ 23.337] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.337] ABI class: X.Org Server Extension, version 4.0
    [ 23.337] (==) AIGLX enabled
    [ 23.337] (II) Loading extension GLX
    [ 23.337] (II) LoadModule: "record"
    [ 23.338] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 23.338] (II) Module record: vendor="X.Org Foundation"
    [ 23.338] compiled for 1.9.3.901, module version = 1.13.0
    [ 23.338] Module class: X.Org Server Extension
    [ 23.338] ABI class: X.Org Server Extension, version 4.0
    [ 23.339] (II) Loading extension RECORD
    [ 23.339] (II) LoadModule: "dri"
    [ 23.339] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 23.347] (II) Module dri: vendor="X.Org Foundation"
    [ 23.347] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.347] ABI class: X.Org Server Extension, version 4.0
    [ 23.347] (II) Loading extension XFree86-DRI
    [ 23.347] (II) LoadModule: "dri2"
    [ 23.348] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 23.351] (II) Module dri2: vendor="X.Org Foundation"
    [ 23.351] compiled for 1.9.3.901, module version = 1.2.0
    [ 23.351] ABI class: X.Org Server Extension, version 4.0
    [ 23.351] (II) Loading extension DRI2
    [ 23.351] (==) Matched intel as autoconfigured driver 0
    [ 23.351] (==) Matched vesa as autoconfigured driver 1
    [ 23.351] (==) Matched fbdev as autoconfigured driver 2
    [ 23.351] (==) Assigned the driver to the xf86ConfigLayout
    [ 23.351] (II) LoadModule: "intel"
    [ 23.352] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 23.408] (II) Module intel: vendor="X.Org Foundation"
    [ 23.408] compiled for 1.9.3, module version = 2.14.0
    [ 23.408] Module class: X.Org Video Driver
    [ 23.408] ABI class: X.Org Video Driver, version 8.0
    [ 23.408] (II) LoadModule: "vesa"
    [ 23.408] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 23.414] (II) Module vesa: vendor="X.Org Foundation"
    [ 23.414] compiled for 1.9.0, module version = 2.3.0
    [ 23.414] Module class: X.Org Video Driver
    [ 23.414] ABI class: X.Org Video Driver, version 8.0
    [ 23.414] (II) LoadModule: "fbdev"
    [ 23.425] (WW) Warning, couldn't open module fbdev
    [ 23.425] (II) UnloadModule: "fbdev"
    [ 23.425] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 23.426] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    Sandybridge, Sandybridge
    [ 23.426] (II) VESA: driver for VESA chipsets: vesa
    [ 23.426] (++) using VT number 7
    [ 23.435] (WW) Falling back to old probe method for vesa
    [ 23.435] drmOpenDevice: node name is /dev/dri/card0
    [ 23.435] drmOpenDevice: open result is 8, (OK)
    [ 23.435] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 23.435] drmOpenDevice: node name is /dev/dri/card0
    [ 23.435] drmOpenDevice: open result is 8, (OK)
    [ 23.435] drmOpenByBusid: drmOpenMinor returns 8
    [ 23.435] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 23.435] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 23.435] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 23.435] (==) intel(0): RGB weight 888
    [ 23.435] (==) intel(0): Default visual is TrueColor
    [ 23.436] (II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
    [ 23.436] (--) intel(0): Chipset: "946GZ"
    [ 23.436] (**) intel(0): Tiling enabled
    [ 23.436] (**) intel(0): SwapBuffers wait enabled
    [ 23.436] (==) intel(0): video overlay key set to 0x101fe
    [ 23.520] (II) intel(0): Output VGA1 has no monitor section
    [ 23.587] (II) intel(0): EDID for output VGA1
    [ 23.587] (II) intel(0): Manufacturer: SAM Model: 594 Serial#: 1297691186
    [ 23.587] (II) intel(0): Year: 2010 Week: 1
    [ 23.587] (II) intel(0): EDID Version: 1.3
    [ 23.587] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    [ 23.587] (II) intel(0): Sync: Separate Composite SyncOnGreen
    [ 23.587] (II) intel(0): Max Image Size [cm]: horiz.: 44 vert.: 30
    [ 23.587] (II) intel(0): Gamma: 2.20
    [ 23.587] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
    [ 23.587] (II) intel(0): First detailed timing is preferred mode
    [ 23.587] (II) intel(0): redX: 0.646 redY: 0.339 greenX: 0.290 greenY: 0.603
    [ 23.587] (II) intel(0): blueX: 0.145 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
    [ 23.587] (II) intel(0): Supported established timings:
    [ 23.587] (II) intel(0): 720x400@70Hz
    [ 23.587] (II) intel(0): 640x480@60Hz
    [ 23.587] (II) intel(0): 640x480@67Hz
    [ 23.587] (II) intel(0): 640x480@72Hz
    [ 23.587] (II) intel(0): 640x480@75Hz
    [ 23.587] (II) intel(0): 800x600@56Hz
    [ 23.587] (II) intel(0): 800x600@60Hz
    [ 23.587] (II) intel(0): 800x600@72Hz
    [ 23.587] (II) intel(0): 800x600@75Hz
    [ 23.587] (II) intel(0): 832x624@75Hz
    [ 23.587] (II) intel(0): 1024x768@60Hz
    [ 23.587] (II) intel(0): 1024x768@70Hz
    [ 23.587] (II) intel(0): 1024x768@75Hz
    [ 23.587] (II) intel(0): 1280x1024@75Hz
    [ 23.587] (II) intel(0): 1152x864@75Hz
    [ 23.587] (II) intel(0): Manufacturer's mask: 0
    [ 23.587] (II) intel(0): Supported standard timings:
    [ 23.587] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 23.587] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 23.587] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 23.587] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 23.587] (II) intel(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 23.587] (II) intel(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 23.587] (II) intel(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 23.588] (II) intel(0): Supported detailed timing:
    [ 23.588] (II) intel(0): clock: 119.0 MHz Image Size: 459 x 296 mm
    [ 23.588] (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    [ 23.588] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    [ 23.588] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
    [ 23.588] (II) intel(0): Monitor name: SyncMaster
    [ 23.588] (II) intel(0): Serial No: HMFZ102588
    [ 23.588] (II) intel(0): EDID (in hex):
    [ 23.588] (II) intel(0): 00ffffffffffff004c2d94053232594d
    [ 23.588] (II) intel(0): 011401030e2c1e782ab501a5564a9a25
    [ 23.588] (II) intel(0): 125054bfef80b30081808140714f8100
    [ 23.588] (II) intel(0): 9500950f01017c2e90a0601a1e403020
    [ 23.588] (II) intel(0): 3600cb281100001a000000fd00384b1e
    [ 23.588] (II) intel(0): 510e000a202020202020000000fc0053
    [ 23.588] (II) intel(0): 796e634d61737465720a2020000000ff
    [ 23.588] (II) intel(0): 00484d465a3130323538380a20200026
    [ 23.588] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 23.613] (II) intel(0): Using EDID range info for horizontal sync
    [ 23.613] (II) intel(0): Using EDID range info for vertical refresh
    [ 23.613] (II) intel(0): Printing DDC gathered Modelines:
    [ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23.613] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23.613] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 23.613] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 23.613] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 23.613] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 23.614] (II) intel(0): Printing probed modes for output VGA1
    [ 23.614] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 23.614] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
    [ 23.614] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23.614] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23.614] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 23.614] (II) intel(0): Output VGA1 connected
    [ 23.614] (II) intel(0): Using exact sizes for initial modes
    [ 23.614] (II) intel(0): Output VGA1 using initial mode 1680x1050
    [ 23.614] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 23.614] (II) intel(0): Kernel page flipping support detected, enabling
    [ 23.614] (**) intel(0): Display dimensions: (440, 300) mm
    [ 23.614] (**) intel(0): DPI set to (96, 88)
    [ 23.614] (II) Loading sub module "fb"
    [ 23.614] (II) LoadModule: "fb"
    [ 23.615] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 23.628] (II) Module fb: vendor="X.Org Foundation"
    [ 23.629] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.629] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 23.629] (II) UnloadModule: "vesa"
    [ 23.629] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 23.629] (==) Depth 24 pixmap format is 32 bpp
    [ 23.629] (==) intel(0): VideoRam: 262144 KB
    [ 23.629] (II) intel(0): [DRI2] Setup complete
    [ 23.629] (II) intel(0): [DRI2] DRI driver: i915
    [ 23.629] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
    [ 23.656] (II) UXA(0): Driver registered support for the following operations:
    [ 23.656] (II) solid
    [ 23.656] (II) copy
    [ 23.656] (II) composite (RENDER acceleration)
    [ 23.656] (II) put_image
    [ 23.656] (II) get_image
    [ 23.656] (==) intel(0): Backing store disabled
    [ 23.656] (==) intel(0): Silken mouse enabled
    [ 23.658] (II) intel(0): Initializing HW Cursor
    [ 23.673] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 23.673] (==) intel(0): DPMS enabled
    [ 23.673] (==) intel(0): Intel XvMC decoder disabled
    [ 23.673] (II) intel(0): Set up textured video
    [ 23.673] (II) intel(0): Set up overlay video
    [ 23.673] (II) intel(0): direct rendering: DRI2 Enabled
    [ 23.673] (==) intel(0): hotplug detection: "enabled"
    [ 23.674] (--) RandR disabled
    [ 23.674] (II) Initializing built-in extension Generic Event Extension
    [ 23.674] (II) Initializing built-in extension SHAPE
    [ 23.674] (II) Initializing built-in extension MIT-SHM
    [ 23.674] (II) Initializing built-in extension XInputExtension
    [ 23.674] (II) Initializing built-in extension XTEST
    [ 23.674] (II) Initializing built-in extension BIG-REQUESTS
    [ 23.674] (II) Initializing built-in extension SYNC
    [ 23.674] (II) Initializing built-in extension XKEYBOARD
    [ 23.674] (II) Initializing built-in extension XC-MISC
    [ 23.674] (II) Initializing built-in extension SECURITY
    [ 23.674] (II) Initializing built-in extension XINERAMA
    [ 23.674] (II) Initializing built-in extension XFIXES
    [ 23.674] (II) Initializing built-in extension RENDER
    [ 23.674] (II) Initializing built-in extension RANDR
    [ 23.674] (II) Initializing built-in extension COMPOSITE
    [ 23.674] (II) Initializing built-in extension DAMAGE
    [ 23.754] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 23.754] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 23.754] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 23.754] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 23.754] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 23.754] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    [ 23.754] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 23.755] (II) intel(0): Setting screen physical size to 444 x 277
    [ 24.316] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 24.316] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.316] (II) LoadModule: "evdev"
    [ 24.317] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 24.334] (II) Module evdev: vendor="X.Org Foundation"
    [ 24.334] compiled for 1.9.0, module version = 2.5.0
    [ 24.334] Module class: X.Org XInput Driver
    [ 24.334] ABI class: X.Org XInput driver, version 11.0
    [ 24.334] (**) Power Button: always reports core events
    [ 24.334] (**) Power Button: Device: "/dev/input/event1"
    [ 24.340] (--) Power Button: Found keys
    [ 24.340] (II) Power Button: Configuring as keyboard
    [ 24.340] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 24.340] (**) Option "xkb_rules" "evdev"
    [ 24.340] (**) Option "xkb_model" "evdev"
    [ 24.340] (**) Option "xkb_layout" "us"
    [ 24.380] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 24.380] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.380] (**) Power Button: always reports core events
    [ 24.380] (**) Power Button: Device: "/dev/input/event0"
    [ 24.386] (--) Power Button: Found keys
    [ 24.386] (II) Power Button: Configuring as keyboard
    [ 24.386] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 24.386] (**) Option "xkb_rules" "evdev"
    [ 24.386] (**) Option "xkb_model" "evdev"
    [ 24.386] (**) Option "xkb_layout" "us"
    [ 24.394] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 24.394] (II) No input driver/identifier specified (ignoring)
    [ 24.398] (II) config/udev: Adding input device CHICONY USB NetVista Full Width Keyboard (/dev/input/event4)
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: always reports core events
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Device: "/dev/input/event4"
    [ 24.403] (--) CHICONY USB NetVista Full Width Keyboard: Found keys
    [ 24.403] (II) CHICONY USB NetVista Full Width Keyboard: Configuring as keyboard
    [ 24.403] (II) XINPUT: Adding extended input device "CHICONY USB NetVista Full Width Keyboard" (type: KEYBOARD)
    [ 24.403] (**) Option "xkb_rules" "evdev"
    [ 24.403] (**) Option "xkb_model" "evdev"
    [ 24.403] (**) Option "xkb_layout" "us"
    [ 24.411] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 24.411] (II) No input driver/identifier specified (ignoring)
    [ 27.181] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.182] (II) intel(0): Using hsync ranges from config file
    [ 27.182] (II) intel(0): Using vrefresh ranges from config file
    [ 27.182] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.182] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.182] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.182] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.182] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.182] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.256] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.256] (II) intel(0): Using hsync ranges from config file
    [ 27.256] (II) intel(0): Using vrefresh ranges from config file
    [ 27.256] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.256] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.256] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.256] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.256] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.256] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.363] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.363] (II) intel(0): Using hsync ranges from config file
    [ 27.364] (II) intel(0): Using vrefresh ranges from config file
    [ 27.364] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.364] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.364] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.364] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.364] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.364] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.433] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.433] (II) intel(0): Using hsync ranges from config file
    [ 27.433] (II) intel(0): Using vrefresh ranges from config file
    [ 27.433] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.433] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.434] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.434] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.434] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.434] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.434] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 33.144] (EE) intel(0): Detected a hung GPU, disabling acceleration.
    [ 33.145] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.146] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.284] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.287] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.294] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.723] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.724] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.732] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 34.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 34.893] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 35.695] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 36.096] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 36.896] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 37.298] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 38.948] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 38.949] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.057] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.057] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.255] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.255] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.329] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.337] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.341] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 42.522] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.522] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.531] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 42.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 45.970] (EE) intel(0): failed to set cursor: Input/output error
    [ 45.970] (EE) intel(0): failed to set cursor: Input/output error
    [ 46.957] (EE) intel(0): failed to set cursor: Input/output error
    [ 46.957] (EE) intel(0): failed to set cursor: Input/output error
    [ 53.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 53.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.206] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.206] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.804] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.804] (EE) intel(0): failed to set cursor: Input/output error
    [ 72.861] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
    [ 72.861] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 72.861] (**) USB Optical Mouse: always reports core events
    [ 72.861] (**) USB Optical Mouse: Device: "/dev/input/event5"
    [ 72.866] (--) USB Optical Mouse: Found 3 mouse buttons
    [ 72.866] (--) USB Optical Mouse: Found scroll wheel(s)
    [ 72.866] (--) USB Optical Mouse: Found relative axes
    [ 72.866] (--) USB Optical Mouse: Found x and y relative axes
    [ 72.866] (II) USB Optical Mouse: Configuring as mouse
    [ 72.866] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 72.866] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 72.867] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
    [ 72.867] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration profile 0
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration threshold: 4
    [ 72.867] (II) USB Optical Mouse: initialized for relative axes.
    [ 72.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
    [ 72.868] (II) No input driver/identifier specified (ignoring)
    [ 84.484] (EE) intel(0): failed to set cursor: Input/output error
    [ 84.484] (EE) intel(0): failed to set cursor: Input/output error
    [ 136.555] (EE) intel(0): failed to set cursor: Input/output error
    [ 136.555] (EE) intel(0): failed to set cursor: Input/output error
    [ 163.561] (EE) intel(0): failed to set cursor: Input/output error
    [ 163.561] (EE) intel(0): failed to set cursor: Input/output error
    [ 176.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 176.752] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.565] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.565] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.613] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.613] (EE) intel(0): failed to set cursor: Input/output error
    [ 190.939] (EE) intel(0): failed to set cursor: Input/output error
    [ 190.939] (EE) intel(0): failed to set cursor: Input/output error
    [ 196.719] (EE) intel(0): failed to set cursor: Input/output error
    [ 196.719] (EE) intel(0): failed to set cursor: Input/output error
    [ 197.007] (EE) intel(0): failed to set cursor: Input/output error
    [ 197.007] (EE) intel(0): failed to set cursor: Input/output error
    [ 200.991] (EE) intel(0): failed to set cursor: Input/output error
    [ 200.991] (EE) intel(0): failed to set cursor: Input/output error
    [ 202.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 202.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 203.164] (EE) intel(0): failed to set cursor: Input/output error
    [ 203.164] (EE) intel(0): failed to set cursor: Input/output error
    [ 207.322] (EE) intel(0): failed to set cursor: Input/output error
    [ 207.323] (EE) intel(0): failed to set cursor: Input/output error
    [ 208.093] (EE) intel(0): failed to set cursor: Input/output error
    [ 208.094] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.080] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.081] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.641] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.642] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.392] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.392] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.885] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.885] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.899] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.899] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.912] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.913] (EE) intel(0): failed to set cursor: Input/output error
    [ 244.351] (EE) intel(0): failed to set cursor: Input/output error
    [ 244.351] (EE) intel(0): failed to set cursor: Input/output error
    [ 245.332] (EE) intel(0): failed to set cursor: Input/output error
    [ 245.332] (EE) intel(0): failed to set cursor: Input/output error
    [ 248.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 248.712] (EE) intel(0): failed to set cursor: Input/output error
    [ 249.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 249.348] (EE) intel(0): failed to set cursor: Input/output error
    [ 252.594] (EE) intel(0): failed to set cursor: Input/output error
    [ 252.594] (EE) intel(0): failed to set cursor: Input/output error
    [ 253.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 253.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 273.635] (EE) intel(0): failed to set cursor: Input/output error
    [ 273.635] (EE) intel(0): failed to set cursor: Input/output error
    [ 274.148] (EE) intel(0): failed to set cursor: Input/output error
    [ 274.148] (EE) intel(0): failed to set cursor: Input/output error
    [ 285.208] (EE) intel(0): failed to set cursor: Input/output error
    [ 285.208] (EE) intel(0): failed to set cursor: Input/output error
    [ 287.473] (EE) intel(0): failed to set cursor: Input/output error
    [ 287.473] (EE) intel(0): failed to set cursor: Input/output error
    [ 353.216] (EE) intel(0): failed to set cursor: Input/output error
    [ 353.216] (EE) intel(0): failed to set cursor: Input/output error
    [ 355.928] (EE) intel(0): failed to set cursor: Input/output error
    [ 355.928] (EE) intel(0): failed to set cursor: Input/output error
    [ 357.845] (EE) intel(0): failed to set cursor: Input/output error
    [ 357.845] (EE) intel(0): failed to set cursor: Input/output error
    [ 360.465] (EE) intel(0): failed to set cursor: Input/output error
    [ 360.465] (EE) intel(0): failed to set cursor: Input/output error
    [ 361.916] (EE) intel(0): failed to set cursor: Input/output error
    [ 361.917] (EE) intel(0): failed to set cursor: Input/output error
    [ 363.505] (EE) intel(0): failed to set cursor: Input/output error
    [ 363.505] (EE) intel(0): failed to set cursor: Input/output error
    [ 364.433] (EE) intel(0): failed to set cursor: Input/output error
    [ 364.433] (EE) intel(0): failed to set cursor: Input/output error
    [ 366.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 366.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 367.953] (EE) intel(0): failed to set cursor: Input/output error
    [ 367.954] (EE) intel(0): failed to set cursor: Input/output error
    [ 369.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 369.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 372.906] (EE) intel(0): failed to set cursor: Input/output error
    [ 372.906] (EE) intel(0): failed to set cursor: Input/output error
    [ 374.450] (EE) intel(0): failed to set cursor: Input/output error
    [ 374.451] (EE) intel(0): failed to set cursor: Input/output error
    [ 376.802] (EE) intel(0): failed to set cursor: Input/output error
    [ 376.803] (EE) intel(0): failed to set cursor: Input/output error
    [ 378.140] (EE) intel(0): failed to set cursor: Input/output error
    [ 378.140] (EE) intel(0): failed to set cursor: Input/output error
    [ 382.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 382.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 383.812] (EE) intel(0): failed to set cursor: Input/output error
    [ 383.812] (EE) intel(0): failed to set cursor: Input/output error
    [ 386.612] (EE) intel(0): failed to set cursor: Input/output error
    [ 386.612] (EE) intel(0): failed to set cursor: Input/output error
    [ 388.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 388.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 389.436] (EE) intel(0): failed to set cursor: Input/output error
    [ 389.436] (EE) intel(0): failed to set cursor: Input/output error
    [ 391.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 391.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 392.372] (EE) intel(0): failed to set cursor: Input/output error
    [ 392.373] (EE) intel(0): failed to set cursor: Input/output error
    [ 393.630] (EE) intel(0): failed to set cursor: Input/output error
    [ 393.631] (EE) intel(0): failed to set cursor: Input/output error
    [ 394.932] (EE) intel(0): failed to set cursor: Input/output error
    [ 394.933] (EE) intel(0): failed to set cursor: Input/output error
    [ 396.629] (EE) intel(0): failed to set cursor: Input/output error
    [ 396.629] (EE) intel(0): failed to set cursor: Input/output error
    [ 398.349] (EE) intel(0): failed to set cursor: Input/output error
    [ 398.349] (EE) intel(0): failed to set cursor: Input/output error
    [ 400.264] (EE) intel(0): failed to set cursor: Input/output error
    [ 400.264] (EE) intel(0): failed to set cursor: Input/output error
    [ 402.517] (EE) intel(0): failed to set cursor: Input/output error
    [ 402.518] (EE) intel(0): failed to set cursor: Input/output error
    [ 404.749] (EE) intel(0): failed to set cursor: Input/output error
    [ 404.749] (EE) intel(0): failed to set cursor: Input/output error
    [ 407.798] (EE) intel(0): failed to set cursor: Input/output error
    [ 407.798] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.170] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.170] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.910] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.912] (EE) intel(0): failed to set cursor: Input/output error
    [ 413.276] (EE) intel(0): failed to set cursor: Input/output error
    [ 413.276] (EE) intel(0): failed to set cursor: Input/output error
    [ 414.775] (EE) intel(0): failed to set cursor: Input/output error
    [ 414.775] (EE) intel(0): failed to set cursor: Input/output error
    [ 416.762] (EE) intel(0): failed to set cursor: Input/output error
    [ 416.763] (EE) intel(0): failed to set cursor: Input/output error
    [ 420.439] (EE) intel(0): failed to set cursor: Input/output error
    [ 420.440] (EE) intel(0): failed to set cursor: Input/output error
    [ 424.614] (EE) intel(0): failed to set cursor: Input/output error
    [ 424.614] (EE) intel(0): failed to set cursor: Input/output error
    [ 426.920] (EE) intel(0): failed to set cursor: Input/output error
    [ 426.920] (EE) intel(0): failed to set cursor: Input/output error
    [ 430.033] (EE) intel(0): failed to set cursor: Input/output error
    [ 430.033] (EE) intel(0): failed to set cursor: Input/output error
    [ 432.265] (EE) intel(0): failed to set cursor: Input/output error
    [ 432.265] (EE) intel(0): failed to set cursor: Input/output error
    [ 435.339] (EE) intel(0): failed to set cursor: Input/output error
    [ 435.339] (EE) intel(0): failed to set cursor: Input/output error
    [ 437.705] (EE) intel(0): failed to set cursor: Input/output error
    [ 437.706] (EE) intel(0): failed to set cursor: Input/output error
    [ 441.112] (EE) intel(0): failed to set cursor: Input/output error
    [ 441.112] (EE) intel(0): failed to set cursor: Input/output error
    [ 444.922] (EE) intel(0): failed to set cursor: Input/output error
    [ 444.922] (EE) intel(0): failed to set cursor: Input/output error
    [ 448.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 448.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 450.299] (EE) intel(0): failed to set cursor: Input/output error
    [ 450.299] (EE) intel(0): failed to set cursor: Input/output error
    [ 453.190] (EE) intel(0): failed to set cursor: Input/output error
    [ 453.191] (EE) intel(0): failed to set cursor: Input/output error
    [ 455.467] (EE) intel(0): failed to set cursor: Input/output error
    [ 455.468] (EE) intel(0): failed to set cursor: Input/output error
    [ 458.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 458.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 460.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 460.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 462.768] (EE) intel(0): failed to set cursor: Input/output error
    [ 462.770] (EE) intel(0): failed to set cursor: Input/output error
    [ 464.061] (EE) intel(0): failed to set cursor: Input/output error
    [ 464.061] (EE) intel(0): failed to set cursor: Input/output error
    [ 467.064] (EE) intel(0): failed to set cursor: Input/output error
    [ 467.064] (EE) intel(0): failed to set cursor: Input/output error
    [ 469.637] (EE) intel(0): failed to set cursor: Input/output error
    [ 469.637] (EE) intel(0): failed to set cursor: Input/output error
    [ 472.446] (EE) intel(0): failed to set cursor: Input/output error
    [ 472.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 475.654] (EE) intel(0): failed to set cursor: Input/output error
    [ 475.654] (EE) intel(0): failed to set cursor: Input/output error
    [ 477.849] (EE) intel(0): failed to set cursor: Input/output error
    [ 477.852] (EE) intel(0): failed to set cursor: Input/output error
    [ 481.102] (EE) intel(0): failed to set cursor: Input/output error
    [ 481.102] (EE) intel(0): failed to set cursor: Input/output error
    [ 483.658] (EE) intel(0): failed to set cursor: Input/output error
    [ 483.658] (EE) intel(0): failed to set cursor: Input/output error
    [ 486.239] (EE) intel(0): failed to set cursor: Input/output error
    [ 486.239] (EE) intel(0): failed to set cursor: Input/output error
    [ 489.082] (EE) intel(0): failed to set cursor: Input/output error
    [ 489.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 491.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 491.280] (EE) intel(0): failed to set cursor: Input/output error
    [ 494.315] (EE) intel(0): failed to set cursor: Input/output error
    [ 494.315] (EE) intel(0): failed to set cursor: Input/output error
    [ 495.905] (EE) intel(0): failed to set cursor: Input/output error
    [ 495.905] (EE) intel(0): failed to set cursor: Input/output error
    [ 498.171] (EE) intel(0): failed to set cursor: Input/output error
    [ 498.172] (EE) intel(0): failed to set cursor: Input/output error
    [ 499.312] (EE) intel(0): failed to set cursor: Input/output error
    [ 499.313] (EE) intel(0): failed to set cursor: Input/output error
    [ 501.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 501.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 502.817] (EE) intel(0): failed to set cursor: Input/output error
    [ 502.817] (EE) intel(0): failed to set cursor: Input/output error
    [ 507.125] (EE) intel(0): failed to set cursor: Input/output error
    [ 507.125] (EE) intel(0): failed to set cursor: Input/output error
    [ 508.209] (EE) intel(0): failed to set cursor: Input/output error
    [ 508.210] (EE) intel(0): failed to set cursor: Input/output error
    [ 540.521] (EE) intel(0): failed to set cursor: Input/output error
    [ 540.526] (EE) intel(0): failed to set cursor: Input/output error
    [ 541.621] (EE) intel(0): failed to set cursor: Input/output error
    [ 541.621] (EE) intel(0): failed to set cursor: Input/output error
    [ 552.597] (EE) intel(0): failed to set cursor: Input/output error
    [ 552.597] (EE) intel(0): failed to set cursor: Input/output error
    [ 553.470] (EE) intel(0): failed to set cursor: Input/output error
    [ 553.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 554.186] (EE) intel(0): failed to set cursor: Input/output error
    [ 554.186] (EE) intel(0): failed to set cursor: Input/output error
    [ 555.103] (EE) intel(0): failed to set cursor: Input/output error
    [ 555.103] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.263] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.263] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.333] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.333] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.557] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.557] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.591] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.591] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.606] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.607] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.055] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.055] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.070] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.071] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.300] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.300] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.444] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.444] (EE) intel(0): failed to set cursor: Input/output error
    [ 765.910] (EE) intel(0): failed to set cursor: Input/output error
    [ 765.911] (EE) intel(0): failed to set cursor: Input/output error
    [ 769.826] (EE) intel(0): failed to set cursor: Input/output error
    [ 769.827] (EE) intel(0): failed to set cursor: Input/output error
    [ 771.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 771.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 776.475] (EE) intel(0): failed to set cursor: Input/output error
    [ 776.475] (EE) intel(0): failed to set cursor: Input/output error
    [ 777.584] (EE) intel(0): failed to set cursor: Input/output error
    [ 777.584] (EE) intel(0): failed to set cursor: Input/output error
    [ 782.163] (EE) intel(0): failed to set cursor: Input/output error
    [ 782.163] (EE) intel(0): failed to set cursor: Input/output error
    [ 784.345] (EE) intel(0): failed to set cursor: Input/output error
    [ 784.345] (EE) intel(0): failed to set cursor: Input/output error
    [ 789.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 789.814] (EE) intel(0): failed to set cursor: Input/output error
    [ 793.986] (EE) intel(0): failed to set cursor: Input/output error
    [ 793.986] (EE) intel(0): failed to set cursor: Input/output error
    [ 796.717] (EE) intel(0): failed to set cursor: Input/output error
    [ 796.717] (EE) intel(0): failed to set cursor: Input/output error
    [ 802.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 802.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 805.567] (EE) intel(0): failed to set cursor: Input/output error
    [ 805.568] (EE) intel(0): failed to set cursor: Input/output error
    [ 807.811] (EE) intel(0): failed to set cursor: Input/output error
    [ 807.811] (EE) intel(0): failed to set cursor: Input/output error
    [ 814.410] (EE) intel(0): failed to set cursor: Input/output error
    [ 814.410] (EE) intel(0): failed to set cursor: Input/output error
    [ 815.460] (EE) intel(0): failed to set cursor: Input/output error
    [ 815.460] (EE) intel(0): failed to set cursor: Input/output error
    [ 818.800] (EE) intel(0): failed to set cursor: Input/output error
    [ 818.800] (EE) intel(0): failed to set cursor: Input/output error
    [ 821.589] (EE) intel(0): failed to set cursor: Input/output error
    [ 821.589] (EE) intel(0): failed to set cursor: Input/output error
    [ 825.657] (EE) intel(0): failed to set cursor: Input/output error
    [ 825.657] (EE) intel(0): failed to set cursor: Input/output error
    [ 828.078] (EE) intel(0): failed to set cursor: Input/output error
    [ 828.078] (EE) intel(0): failed to set cursor: Input/output error
    [ 831.833] (EE) intel(0): failed to set cursor: Input/output error
    [ 831.834] (EE) intel(0): failed to set cursor: Input/output error
    [ 833.806] (EE) intel(0): failed to set cursor: Input/output error
    [ 833.807] (EE) intel(0): failed to set cursor: Input/output error
    [ 835.978] (EE) intel(0): failed to set cursor: Input/output error
    [ 835.978] (EE) intel(0): failed to set cursor: Input/output error
    [ 840.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 840.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 854.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 854.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 855.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 855.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 867.428] (EE) intel(0): failed to set cursor: Input/output error
    [ 867.429] (EE) intel(0): failed to set cursor: Input/output error
    [ 870.354] (EE) intel(0): failed to set cursor: Input/output error
    [ 870.355] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.955] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.955] (EE) intel(0): failed to set cursor: Input/output error
    [ 877.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 877.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 878.020] (EE) intel(0): failed to set cursor: Input/output error
    [ 878.021] (EE) intel(0): failed to set cursor: Input/output error
    [ 880.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 880.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 881.708] (EE) intel(0): failed to set cursor: Input/output error
    [ 881.708] (EE) intel(0): failed to set cursor: Input/output error
    [ 884.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 884.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 893.533] (EE) intel(0): failed to set cursor: Input/output error
    [ 893.533] (EE) intel(0): failed to set cursor: Input/output error
    [ 896.537] (EE) intel(0): failed to set cursor: Input/output error
    [ 896.537] (EE) intel(0): failed to set cursor: Input/output error
    [ 898.029] (EE) intel(0): failed to set cursor: Input/output error
    [ 898.030] (EE) intel(0): failed to set cursor: Input/output error
    [ 901.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 901.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 902.670] (EE) intel(0): failed to set cursor: Input/output error
    [ 902.670] (EE) intel(0): failed to set cursor: Input/output error
    [ 907.266] (EE) intel(0): failed to set cursor: Input/output error
    [ 907.267] (EE) intel(0): failed to set cursor: Input/output error
    [ 908.415] (EE) intel(0): failed to set cursor: Input/output error
    [ 908.415] (EE) intel(0): failed to set cursor: Input/output error
    [ 911.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 911.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 912.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 912.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 914.699] (EE) intel(0): failed to set cursor: Input/output error
    [ 914.699] (EE) intel(0): failed to set cursor: Input/output error
    [ 915.519] (EE) intel(0): failed to set cursor: Input/output error
    [ 915.520] (EE) intel(0): failed to set cursor: Input/output error
    [ 921.179] (EE) intel(0): failed to set cursor: Input/output error
    [ 921.180] (EE) intel(0): failed to set cursor: Input/output error
    [ 923.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 923.297] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.020] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.021] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.881] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.881] (EE) intel(0): failed to set cursor: Input/output error
    [ 930.252] (EE) intel(0): failed to set cursor: Input/output error
    [ 930.252] (EE) intel(0): failed to set cursor: Input/output error
    [ 931.105] (EE) intel(0): failed to set cursor: Input/output error
    [ 931.105] (EE) intel(0): failed to set cursor: Input/output error
    [ 938.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 938.376] (EE) intel(0): failed to set cursor: Input/output error
    [ 951.395] (EE) intel(0): failed to set cursor: Input/output error
    [ 951.396] (EE) intel(0): failed to set cursor: Input/output error
    [ 997.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 997.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
    [ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
    [ 1042.673] (EE) intel(0): failed to set cursor: Input/output error
    [ 1042.674] (EE) intel(0): failed to set cursor: Input/output error
    [ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
    [ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
    [ 1061.964] (EE) intel(0): failed to set cursor: Input/output error
    [ 1061.964] (EE) intel(0): failed to set cursor: Input/outpu

    I have installed the xf86-video-intel-newest from AUR, but with modified version - 2.13.0. Now mouse pointer works.

  • After starting Creative Cloud just a white Window appears, no Apps or something else Windows 8.1, more uninstallation and re-install didn't bring a solution

    After starting Creative Cloud just a white Window appears, no Apps or something else Windows 8.1, more uninstallation and re-install didn't bring a solution. I have had installed Photoshop CC Trial Version, but had to re-boot the system, so I lost the Software. After re-installing the Creative Cloud Desktop appeared just a White window. I tried to delete the file of OOBD in AppData but no reaction. It still appears as a clear window.

    See if the following helps:
    https://forums.adobe.com/thread/1249756

  • Photoshop Elements 13 running in Windows 8.1 hangs immediately after starting

    Photoshop Elements 13 running in Windows 8.1 hangs immediately after starting.  Has to be shut down by Task Manger.  Task Manger shows that it is still using some CPU.  Ran Procmon (part of Sysinternals) which shows that it is in a loop.   Stack trace shows it is executing code in AMTValidateProductLicense.dll.  Started happening about a month after I installed PSE.  Everything used to work fine at first.  Have tried going back to an old image of Win 8.1 on a different hard drive, otherwise same computer, and installed PSE 13 from DVD.  That installation never worked, it aways hangs.  If I do a clean boot, it sometimes runs long enough for me to click on a menu item and then hangs the same way.  And, yes I bought a new DVD to run on this computer, never been used in any other way.  Any ideas how I can get PSE running properly?

    It really doesn't look like a licensing issue, it seems to be code in the area of license validation that isn't working.
    I took your suggestion and initiated a couple of chat sessions with support, but so far still no luck.  The latest session with Neeraj seemed to be promising.  After some investigation he asked to reinstall.  First he uninstalled with Revo Uninstall, which seemed to be pretty thorough.  That required a restart, so he set things up to restore his conference session and took my phone number.  Unfortunately I guess his connection didn't come back.  When I didn't hear from him after a couple of hours I tried installing Photoshop and Premiere myself.  As before, Premiere works and Photoshop doesn't.  When I start Photoshop, the window opens and for a couple of seconds menus open when I click on them.  Then the window freezes and I have to use Task Manager to kill it.  So basically, I've tried several things but I'm back where I've been all along, I can't get Photoshop to work.  I'd really appreciate suggestions about something else to try.
    I wish someone at Adobe was interested in the Process Monitor traces I've made, because I'm sure someone who knows the code would be able to figure out pretty quickly what's happening.  Is it trying to read a file that's not there, failing to write a file, failing to make an internet connection or what?  It really shouldn't be this hard to figure out.

  • Logical standby Slow after starting auditing

    Hi:
    I have logical standby, which was keeping with the primary database, then we started auditing on the primary database(Database auditing.) , After starting auditing my Logical standby not keeping with primary, after doing reasearch we found out that there are so many sql statement from sys schema on AUD$ table, and they are doing full tablescan on it, which is of 3GB as off now. Also This table is own by sys and by default all sys objects should be excluded from logical standby apply. But this is not, when I tryed to skip it by my self, then apply process gives ora-600 and stops.
    I think it is a bug or what ???
    Any help on this will be appriciated.
    Regards
    Bhushan

    Hi Guys:
    After taking my time we decided to truncate the sys.AUD$ on the LOGICAL STANDBY and that solved our problem.Now LS is catching up fast as I can see the progree is verry fast.
    Still if anybody from "ORACLE CORP" is reading this thread they should give us the reason why the sys.aud$ table is beging replicated on the LOGICAL STANDBY site. is this a BUG in oracle?
    Regards
    Bhushan

  • Adobe Acrobat 9.0 has stopped working  (after Start Form Wizard)

    Downloaded Trial for Adobe Acrobat 9.0
    Tried reinstalling
    Latest windows 7 patches
    Adobe Acrobat 9.0 has stopped working
    (after Start Form Wizard)
    Windows can check online for a solution to the problem
    details"
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    Acrobat.exe
      Application Version:    9.0.0.332
      Application Timestamp:    4850eb76
      Fault Module Name:    MakeAccessible.api
      Fault Module Version:    9.0.0.332
      Fault Module Timestamp:    4850e54e
      Exception Code:    c0000005
      Exception Offset:    000e1059
      OS Version:    6.1.7600.2.0.0.256.1
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    ===============================
    ===============================
    SYSTEM INFORMATION
    =========================
    System Parameters
    Available Physical Memory: 1429660 KB
    Available Virtual Memory: 1912212 KB
    BIOS Version: DELL   - 42302e31
    Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
        Version: 8.00.7600.16385 (win7_rtm.090713-1255)
        Creation Date: 2009/07/13
        Creation Time: 4:43:32 PM
    Default Mail: Microsoft Office Outlook
        mapi32.dll
        Version: 1.0.2536.0 (win7_rtm.090713-1255)
    Graphics Card: Intel(R) G33/G31 Express Chipset Family
        Version: 8.14.10.1930
        Check: Not Supported
    Installed Acrobat: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 2:25:18 AM
    Installed Acrobat: C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
        Version: 9.3.2.163
        Creation Date: 2010/04/03
        Creation Time: 10:57:52 PM
    Locale: English (United States)
    Monitor:
        Name: Intel(R) G33/G31 Express Chipset Family
        Resolution: 1024 x 768 x 75
        Bits per pixel: 32
    OS Manufacturer: Microsoft Corporation
    OS Name: Microsoft Windows Vista
    OS Version: 6.1.7600 
    Page File Space: 4194303 KB
    Processor: x86 Family 6 Model 23 Stepping 7  GenuineIntel  ~2493  Mhz
    System Name: DELLINSPIRON
    Temporary Directory: C:\Users\alan\AppData\Local\Temp\
    Time Zone: Pacific Standard Time
    Total Physical Memory: 2097151 KB
    Total Virtual Memory: 2097024 KB
    User Name: alan
    Windows Directory: C:\Windows
    Installed Plugins
    =================
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Annots.api
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 1:59:50 AM
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\EScript.api
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 2:05:18 AM
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\PPKLite.api
        Version: 9.0.0.0
        Creation Date: 2008/06/12
        Creation Time: 2:08:24 AM
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\SendMail.api
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 2:17:10 AM
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Updater.api
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 2:00:30 AM

    To go along with Michael's suggestion, something like AA9.2 is needed for X64 systems I think. Also, be careful. Acrobat is not licensed for use on a server. Using it as a user is fine, but not as a server application. Read the license carefully.

  • Unable to start the Managed servers OIM and SOA after starting the Weblogic

    Hi,
    We are unable to start the any manager servers after starting the weblogic Admin Server.
    We are getting the below error after trying to start the OIM or SOA managed servers.
    Error: Exception thrown by the agent : java.rmi.server.ExportException: Port already in use: 5555; nested exception is:
         java.net.BindException: Address already in use
    We have also cross verified that the port 5555 is listening after starting the weblogic Admin server.
    Please help us to start the managed servers in the weblogic 10.3.5.
    Thanks.

    We are getting the below errors after starting the Admin server and Managed servers.
    Admin Server:
    <Jan 11, 2012 7:15:06 AM EST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    <Jan 11, 2012 7:16:02 AM EST> <Error> <org.apache.beehive.netui.pageflow.internal.AdapterManager> <BEA-000000> <ServletContainerAdapter manager not initialized correctly.>
    Managed Server:
    Starting WLS with line:
    /opt/jdk1.6.0_27/bin/java -client -Xms1024m -Xmx4096m -XX:PermSize=512m -XX:MaxPermSize=1024m -Dweblogic.Name=oim_server1 -Djava.security.policy=/ama/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.security.SSL.trustedCAKeyStore=/ama/Oracle/Middleware/wlserver_10.3/server/lib/cacerts -Xverify:none -da -Dplatform.home=/ama/Oracle/Middleware/wlserver_10.3 -Dwls.home=/ama/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/ama/Oracle/Middleware/wlserver_10.3/server -Dcommon.components.home=/ama/Oracle/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/ama/Oracle/Middleware/user_projects/domains/base_domain -Djrockit.optfile=/ama/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig/servers/oim_server1 -Doracle.domain.config.dir=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig/carml -Digf.arisidstack.home=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/ama/Oracle/Middleware/user_projects/domains/base_domain/servers/oim_server1/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/ama/Oracle/Middleware/Oracle_IDM1/server/loginmodule/wls,/ama/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/ama/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol|oracle.fabric.common.classloaderurl.handler|oracle.fabric.common.uddiurl.handler|oracle.bpm.io.fs.protocol -Dweblogic.jdbc.remoteEnabled=false -DXL.HomeDir=/ama/Oracle/Middleware/Oracle_IDM1/server -Djava.security.auth.login.config=/ama/Oracle/Middleware/Oracle_IDM1/server/config/authwl.conf -Dorg.owasp.esapi.resources=/ama/Oracle/Middleware/Oracle_IDM1/server/apps/oim.ear/APP-INF/classes -da:org.apache.xmlbeans... -Dsoa.archives.dir=/ama/Oracle/Middleware/Oracle_SOA1/soa -Dsoa.oracle.home=/ama/Oracle/Middleware/Oracle_SOA1 -Dsoa.instance.home=/ama/Oracle/Middleware/user_projects/domains/base_domain -Dtangosol.coherence.clusteraddress=227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dweblogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Djavax.net.ssl.trustStore=/ama/Oracle/Middleware/wlserver_10.3/server/lib/DemoTrust.jks -Dem.oracle.home=/ama/Oracle/Middleware/oracle_common -Djava.awt.headless=true -Dums.oracle.home=/ama/Oracle/Middleware/Oracle_SOA1 -Dweblogic.management.discover=false -Dweblogic.management.server=http://127.0.0.1:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/ama/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/ama/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath weblogic.Server
    Error: Exception thrown by the agent : java.rmi.server.ExportException: Port already in use: 5555; nested exception is:
         java.net.BindException: Address already in use
    We have to find out why the port 5555 is in listening mode after starting the Admin server.

Maybe you are looking for

  • Copying an Iphoto Album&Project from one Mac to another

    I have Iphoto 08 on both a macbook running 10.4.11 and IMAC running 10.5.1. I was using the macbook to download and store all pictures until I got the IMAC. I copied the Iphoto library to an external harddrive that is now attached to the IMAC and am

  • Strange characters in pdf

    Hello, i have a strange problem with "strange characters" (such as "à", "ö" etc). I have to edit pdf files produced with Adobe Acrobat by other people. In some cases, when i try to "copy and paste" text from this file into a "note" (within the same f

  • Importing visual jsf page into another jsp page

    Hi I am developing a web application using jsp and struts. I want to embed a visual jsf page that Ive created into another jsp page (which is a normal jsp page, not a jsf one.) Ive tried quite a few things but nothing seems to work.. <jsp:include pag

  • How to identify activity/ command 'CLOSE' in transaction code CJ02

    Hi, I need to implement a check in transaction code - CJ02 when command 'CLOSE' is performed to close a WBS Element. This check is being planned to be implemented using BADi - WORKBREAKDOWN_UPDATE using 'AT_SAVE' method. However I am unable to captur

  • Oracle Net Configuration Assistant failed during installtion ..

    Hello, I have installed oracle 11g on windows 7 enterprise editions..64 bit.. During installtion i am gettign [INS-20802] Oracle Net Configuration Assistant failed. meaasge INFO: Error: Environmental error detected: Oracle Home is set to "C:\app\orac