IWork 2.2 (iOS) disables "Use iCloud" option on opening the app???
After updating the the latest iWork apps (v2.2) there were no documents that were previously there...
I checking icloud.com and all the documents were still in existence. I finally discovered that the "Use iCloud" option in the settings for each of the apps had been disabled. I re-enabled it, but every time I re-opened the app it was disabled again!
Anyone else experiencing this and any workaround?
You are right, Hulu, that important bit of information is not even mentioned on the GarageBand Help page: Use iCloud with GarageBand
The document only mentions, that iCloud for GarageBand will have to be enabled. And it is really not obvious, that the "Sync Documents and Data" needs to be active to, or your iPad will not sync GarageBand projects, because no application data will be synced at all.
Similar Messages
-
I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming backBack up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
"Use iCloud" option does not appear in GarageBand for iOS
For work, I have an iPad 2 running iOS 7.0.4. I recently updated GarageBand on that device to version 2.0. I have several songs on my work iPad that I would like to share via iCloud to my new home iPad mini (Retina) WiFi also running iOS 7.0.4, also with GarageBand version 2.0 installed.
I went into Settings > GarageBand > and toggled on the "Use iCloud" option on both my work iPad 2 and my home iPad mini.
On my work iPad 2:
On my home iPad mini:
Next, I opened GarageBand on my work iPad 2. When I tapped on the "+" icon, there was no option to "Use iCloud" (as noted in this CNET article: http://howto.cnet.com/8301-11310_39-57408186-285/how-to-use-icloud-with-garageba nd-for-ios/). Here is the screenshot:
When I tapped on the "Select" button and selected a song, no iCloud icon appears anywhere on the screen. Here is the screenshot:
So, at this point, I'm fairly frustrated because what should be a fairly easy and obvious solution is simply not appearing.
I decide to try the same method on my new home iPad mini. I opened GarageBand, but this time when I tapped on the "+" icon, it brought me straight to the Instrument view. So I went back to Song view. When I tapped on the "Select" button and selected a test song, again no iCloud icon appears anywhere on the screen. Here is the screenshot:
I tried hard restarting both iPads. Nothing. I tried deleting and re-installing GarageBand on the new home iPad mini (didn't want to on the work iPad 2 or I'd lose what I was trying to share!). Again, nothing. I would really just like to transfer via iCloud my personal song files from my work iPad 2 over to my home iPad mini. It should be simple to do and I don't really understand what I'm doing wrong here. I have followed all the instructions correctly, but the "Use iCloud" option just isn't working for me on either device.
I have been unable to find any other support threads similar to my problem. I'm hoping someone here can help me... PLEASE! I'm at my wit's end here :/You are right, Hulu, that important bit of information is not even mentioned on the GarageBand Help page: Use iCloud with GarageBand
The document only mentions, that iCloud for GarageBand will have to be enabled. And it is really not obvious, that the "Sync Documents and Data" needs to be active to, or your iPad will not sync GarageBand projects, because no application data will be synced at all. -
I did not choose "use icloud" option for storing during my initial setup. How can I reset icloud account, so it can be used for storing.
Welcome to Apple Support Communities
If you are planning on using iCloud to store files, forget about iCloud and use a cloud storage service like SkyDrive or Dropbox. iCloud is focused on information sync between the iPhone, iPad, iPod touch, Mac and PC instead of storing files like MobileMe. It's not worth using iCloud for this.
If you still want to set up iCloud, open Settings > iCloud, log in with your Apple ID and follow its steps -
I have updated my phone to iOS 8.2 and i m new to using iPhone. Whenever i am trying to open my iTunes store, its only showing me the option to open the iTunesU store. Can anyone help me with that?
Unfortunately Pakistan is one of those countries where media isn't available from iTunes - when that might change we won't know (we are fellow users on here) until if/when Apple announce something.
Are there other music purchase download sites available there ? Or you can copy your CDs via your computer's iTunes and sync them to your phone -
Ipad 3, Numbers keeps turning off use Icloud option
All of the sudden I can no longer retreive documents in Numbers or Pages on my Ipad, they are still on my Iphone but the Ipad says no documents. I went to settings and the use Icloud option was turned off (I never did that!) same with pages, so I turned them back on and tried to access documents and still not there, go back into settings and the use Icloud setting is turned off again. Every time it does the same thing. What is going on?
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414 -
How to choose the restore using icloud option after you have already gone past setting up your phone
How do I choose the restore using icloud option after I have already gone past setting up my Iphone 5?
You have to start over by going to Settings>General>Reset and tapping Erase All Content & Settings. This will bring you back to the setup assistant screens.
-
After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?
If you change your email, you do not need to "change" your AppleID. Just edit your email(s) on your Apple ID by logging in to your AppleID account. You should always use the same AppleID for Apple Services (iCloud, iTunes etc) and multiple ID will cause problems and confusion in the future.
You can manage your Apple ID here:
https://appleid.apple.com -
I have an iPhone 5 and an iTouch and use iCloud. Some of the music in my library plays on my iTouch but does not on my iPhone 5. Any insight as to how to fix this?
I recommend that you
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
More details of how:
http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/
Use the new ID on her iPod but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases. -
I am trying to configure some new unsupervised iPod touch 4th generation using Apple Configurator but it won't give me the option to install the app that appears on the Apps tab. I have tested the to see whether it works in supervised mode and it does but in Prepare mode it won't let me tick the box.
Any ideas anyone?
Many thanks
Mario.The requirments say:
Requirements: Compatible with iPhone 3GS, iPhone 4, iPhone 4S, iPad 2 Wi-Fi + 3G, and iPad Wi-Fi + 4G.Requires iOS 5.0 or later.
No mention of iPod touch
http://itunes.apple.com/app/jack-boxer/id530122469?mt=8 -
I am trying to sync calendar and contacts on the BB Z10, using iCloud. What is the server address?
I am trying to sync calendar and contacts on the BB Z10, using icloud, what is the server address?
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
Cheers, Tom -
I set up one apple id for icloud on my iphone and another apple id for ipad. I cannot use icloud to automatically sync the two.
How can I delete the incorrect apple id?
-
In 6/2009 I bought iWork Family pack and have used it on two computers. Now I want to download iWork to my iMac but there is no way via the App store. How do I install the iWork bundle I paid for.i
As of a minute ago you can still download the trial at this link. Note: clicking the link will automatically start the download.
-
I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?
Welcome to the Apple community.
You can only restore them from a Computer backup. This has occurred because you are sharing an iCloud account. ideally you should each have your own iCloud account, that way you can each manage your own mail, contacts, calendars, documents etc and avoid unintentional deletions and unwanted editing. If there is information you wish to share between you, this can be done with a secondary account.
Having separate iCloud accounts, doesn't mean you have to have separate iTunes accounts, so whilst you keep your personal data separate, you can continue to share music, apps, books, TV shows, movies etc. -
Error while using selection option variable in the selection screen
Hi All,
I am facing an issue while using selection option variable in the selection screen for one of my reports.
Scenario: For the field "Region From" we need to have wild card logic () in tes selection screen, for example if we put "BE" in the selection screen for the field Region From then the query should be executed only for those "Region From" values which begin from "BE".
Approach: For the above requirement I have made a selection option variable for "Region From". This allows use wild card
But when the report is executed we get the following error:
"System error in program CL_RSR_REQUEST. Invalid filter on ETVRGNFR".
(ETVRGNFR is technical name of the info object Region From)
Though the report is executed it displays all the values for the field "Region From" irrespective of the selection given in the selection screen.
Please give suggestions / alternate solutions to crack this issue.
Thanks in advance
Regards
Priyanka.Hi,
Try to use a variable of type Customer Exit and do the validation inside the exit to display according to your request.
This is just my view, i am not sure if u are already using this or Char. Variable.
Cheers.
Ranga.
Maybe you are looking for
-
How can I check that second hand macbook air is not stolen?
How can I check that second hand macbook air is not stolen?
-
Hi, i'm a relatively new Logic 8/Mac user and thought i'd say hello! I've previously been using a Windows XP setup, hosting Reason 3 and Sonar 5 with a little Tascam Us122 interface and Wharfedale 8.2 monitors, gosh didn't my new upgrade make a bit o
-
Has the odcustomurl.js file (for Gateway page) been renamed in UPK 11.1?
We just upgraded from UPK 3.6.1 to UPK 11.1. I ran the inappconfig.cmd to customize our Gateway page, and I was looking for the "odcustomurl.js" file that it's supposed to generate. However, it did not generate that javascript file, instead, it gener
-
How to delete diagnostic and usage data on iPhone 5s without resetting the phone
In my iPhone 5s I would like to--- remove the long list of, diagnostic and usage data ,---without resting the phone. Any way out. I tried selecting each one and deleting, but not possible. Hoping for a reply soon. Thanking you in advance.
-
Hi Experts, i have create one physical schema like SRC_SCOTT ,logical schema is SRC_SCOTT_LS in my development workrepo,and in my test environment physical schema is same structure like SRC_SCOTT can i reuse the logical schema SRC_SCOTT_