IWork 9.0.2 update - no comments needed?
The update iWork 9.0.2 has been available for a few days now.
The release notes just talk about "reliability".
Did anyone notice any other improvements?
I havn't seen a massive improvement, infact I have seen a lack of improvement. I made a flow chart with boxes and then typed in them. After the update I have to click millions of times to edit the text inside them!!
Similar Messages
-
Is it possible to update the comments field once receiving is done
Hi All,
Can anyone of You help on this.
We have done the receiving against one PO. The material is receipt and delivered in the Inventory.
User has enter in-correct details in the comment field (both at header and line level) during receiving.
Now we need to update the comments section with some new commnets.
Apart from backend/ database update, is it possible to update the comments section since receiving is already done. Please suggest some alternate option.
Thanks
SujayHi Sujay,
You won't be able to update the comments once received.
Alternate approach: Perform correction transactions to reverse all the receiving transactions and re-receive again entering correct comments.
Thanks,
PS. -
I can't update iMovie, just to clear the red spot on the menu bar since I don't use it, update says I need to purchase but I have iMovie 9.0.4 and update is 9.0.6, do I need to purchase?
Disclaimer - For me the Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture very different from that found in most 1st world nations, such as that in the two dominant North American countries. Written language has no tone. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
You are confusing two different versions of the iMovie app. You have downloaded an update to the boxed version that Apple sold in the past. Yoi cannot update the version that Apple now sells in the Mac App Store with that update. -
While saving a workflow using SharePoint designer on a SharePoint site, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
Steps to recreate error:
Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
Access the list using SharePoint Designer 2013, in the workflow section, click new workflow.
In the new workflow dialog, enter workflow details, click save (see screenshot below).
Error message is displayed as below:
After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
Workaround
When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
Notes
Workflow Manager 1.0 is installed.
The site has been registered with Workflow manager using Register-SPWorkflowService
cmdlet.
Any clue on why is this happening?Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hello,
I have the following scenario for the installation of EPM 2013 environment:
1 Server running Windows 2008 R2 SQL Server 2008 R2 Service Pack 2
1 Windows Server 2008 R2 Standard SP1, running Sharepoint 2013 Enterprise (Standard Initially installed and then migrated to the Enterprise in order to install Project Server 2013), Project Server 2013 and Workflow 1.0 (2013).
After configuring and validating the configuration of Workflow 1.0 by http://server_name.example.com:12291 page and also check the Application Services in Central Administration and receive the Workflow Status = Connected.
Alright, but when I run the SPD 2013 RTM to test the creation of Sharepoint Workflow 2013, I get the following warning:
"Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities."
I've tried:
a. Restart SPD2013;
b. Restart Server 2013 and Sharepoint Workflow 1.0;
c. Reinstall and reconfigure Workflow 1.0
And the message is always displayed, preventing the use of Workflow Sharepoint 2013.
Can anyone help me, I'm in the middle of a deployment to a customer.
Print of alertHow did you uninstalledLanguage Pack from SharePoint 2013 ? when I googled it I found that language pack cannot be uninstall@
http://technet.microsoft.com/en-us/library/cc262108.aspx
"If you no longer have to support a language for which you have installed a language pack, you can remove the language pack by using the Control Panel. Removing a language pack removes the language-specific site
templates from the computer. All sites that were created that have those language-specific site templates will no longer work (the URL will produce a HTTP 500 - Internal server error page). Reinstalling the language pack will make the site functional again.
You cannot remove the language pack for the version of SharePoint 2013 that you have installed on the server. For example, if you are running the Japanese version of SharePoint 2013, you cannot uninstall the Japanese language support for SharePoint 2013." -
I don't know my operating system. I bought it in nov of 2011. I am trying to axcess a toshiba external hard drive. what new update do I need to get?
You can find out your current system version by select About This Mac from the Apple menu. To make sure it is updated, select Software Update from the Apple menu. A Mac from Nov. 2011 is probably running "Lion," and the latest version of Lion is Mac OS X 10.7.4.
But that should not affect the connection of an external hard drive. There are no special updates for connecting standard external drives.
Does the external Toshiba drive connect by USB port? Is it the smaller type that gets power from the port (no conection except for the one cable), or is it larger (with its own power supply)? -
The Pages stop working on my computer when I upgraded OS to Mountain Lion. I reinstalled iWork from CD and updated to 9.3 version from Apple store. I also restarted computer before opening the iWork. It still doesn't work. It keeps giving me the error page. The same thing with Numbers. Only Keynotes opens. What else can I do? Heeelp please!
We are not omniscient. Use screencapture on the error page. Shift + Command + 4 … then drag the cross-hairs around the error, and release. The Screen Shot will be written to your Desktop. Use the camera icon in this editor’s tool bar to embed that Screen Shot of your error in a follow-up post here.
Did you move the Pages and Numbers applications out of /Application/iWork ’09 folder, where they are expected to reside? Did you run /Applications/Utilities/Disk Utility.app, and on your boot drive, verify/repair permissions? -
Software update says I need to download MacOS 10.6.7. Each time I try, I have tried 6 times, the software downloads, it has me restart the system, it then writes the files to disk and then I get an error measage that "there was error in installing the softare. Anybody have this problem and how do you fix it? I am running 10.6.6
Try this before trying to install the update.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you still have a problem then I suggest you download the 10.6.7 Combo Updater and install it. -
Hello i am a bit of a novice and need help to bring my MacBookPro up to date. How do i find the relevant updates/upgrades i need, as the software finder, constantly stops a short time after trying to look for updates. The following messege pops up "network error has occured:timed out. (-1001) network problem. Meanwhile i am still connected to the internet?..... HELP!!!!
your only option is to look for Leopard on ebay, ensure they are "retail" discs, dont get they grey coloured disc set as they are for specific machines
-
I have IMAC on which I had Quicken 6. The monitor died. Which Quicken update do I need to run the backups of my quicken6 on my MacBook Air?
You can obtain Quicken 2007 for Mac for $15 from Intel. It will run on OS X Snow Leopard to Yosemite.
You can obtain it for $15 using the Intuit online chat function.
Use the chat feature for Quicken for Mac: Quicken 2007 for Lion: Shopping and Buying: Buying Quicken on this page:
https://quicken.custhelp.com/app/contact/plvl1/win -
I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confused.
To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
About AirPlay Mirroring in OS X -
I want all document updates and comment notifications on by default
I got it working and sending mail to exchange. But now I want to be able to control default notification settings. For example: Our company has a phone list in MS-Excel. When it is updated I was everyone to recieve a notification that it is updated. I don't want them to have any choice in the matter.
And I want all document updates and comment notifications on by default.Hi iTunesDJ,
There is no way to do this. What I would do is put your Settings app on a page itself, so its out of your way. Just ignore your notifactions. I hope this helps!
Thanks, -
im trying to restore my iphone and itunes doesnt allow it to restore without updating. problem is that i have the latest update on my iphone so why is it forcing me to wait for a 7hr update download when i already have the update and only need to restore?
Sadly, the iPhone 3G can not be upgraded beyond iOS 4.2.1.
-
Revision: 11664
Author: [email protected]
Date: 2009-11-11 11:42:00 -0800 (Wed, 11 Nov 2009)
Log Message:
Update ASDoc comments on new MXItemRenderer classes, and fix a broken HTML tag in Range.as
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: - Checkintests
Is noteworthy for integration: No
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/dataGridClasses/MXDataGridItemRe nderer.as
flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/listClasses/MXItemRenderer.as
flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/treeClasses/MXTreeItemRenderer.a s
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Range.asRevision: 11664
Author: [email protected]
Date: 2009-11-11 11:42:00 -0800 (Wed, 11 Nov 2009)
Log Message:
Update ASDoc comments on new MXItemRenderer classes, and fix a broken HTML tag in Range.as
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: - Checkintests
Is noteworthy for integration: No
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/dataGridClasses/MXDataGridItemRe nderer.as
flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/listClasses/MXItemRenderer.as
flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/treeClasses/MXTreeItemRenderer.a s
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Range.as -
IOS 8 update states I need to delete apps under usage settings. True?
ios 8 update states I need to delete apps under usage. I want to keep these apps. Feedback?
This might be true if you are running out of usable space on your device and you want to install a new app. Sometimes installing a new app can take up to 3x as much available space as the actual size of the app. In that case you'll have to free some space by deleting apps or app data.
Maybe you are looking for
-
Portal runtime error while accessing BI Report as URL iView
Hi All, I created an URL Iview with the URL of BI report, when i am trying to access it then getting portal runtime error. I had check the log it is showing the following details about the error, could you please help me out what is the root cause ba
-
Video converting and burning home videos
Do anyone know the best program to convert my sonyhandycam video files and then what software I should use to burn these home videos onto a DVD? Sony's software is not compatible with Mac and iMovie won't recognize them! iDVD is not on my Mac (just p
-
Ipod nano 4gb use itunes to restore востанавливаю все равно все тоже
ipod nano 4gb use itunes to restore востанавливаю все равно все тоже
-
Updating macbook pro (pro's vs con's)
My macbook pro is 10.5 and I'm finding many things just don't work for sharing with my iMac 10.9.4.....the range between the two is just horrible. I don't want to sell my laptop and wanted to know what is the best way of going about updating it. I'
-
Hi, I created a new condition table (for price group), created a new Access Sequence, a new Condition Type (CT) and then condition record for this CT. Now when I try creating a new Sales Order, give my material, it gives the error. Runtime Errors: SA