IWork and iCloud don't work with network account

I am trying to access files that I have saved on my icloud account but when I login with my network account, iWork apps just error when I choose iCloud and it shows me my document folder. If I login to a local account it works correctly. I go to open a document in an iWork document and choose iCloud it correctly shows the documents that I have in iCloud. Is this a server issue or is there something that I am doing wrong. I do have webdav running. could that be confusing it?
David

HI,
Try repairing disk permissions...
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Similar Messages

TS3474 I purchaed the earpods with mic & controls and they don't work with 6th generation nano. Are the features supposed to be compatible with this model of nano?

I purchased the earpods with mic & controls and the features don't work with 6th generation nano--is this normal?

Hi there,
According to the product page:
The remote and mic are supported by all models of iPod, iPhone, and iPad (not all models support volume up/down functions). Audio is supported by all iPod models.
Your iPod Nano may be one of the models that does not support the volume up/down function. Take a look at the page below for more information.
Apple EarPods with Remote and Mic
http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic
-Griff

N86 media buttons and volume don't work with music

I used my N86 on a trip last week as my music player, and used the nokia remote attachment which I used to play/pause, skip, repeat and adjust volume with no problems. Just today I used my phone again, this time without the remote, or headphones, and now the media buttons on the end of the phone (when slid oposite the keypad) don't work, and the sound volume won't adjust with the volume key. I even tried with the remote and that didn't work either. The volume works fine with phone calls. Any ideas on what caused this?
PS I just updated to 20.115 and this did not correct the problem.
Bruce
Message Edited by Erhard on 18-Nov-2009 02:43 PM
Solved!
Go to Solution.

Sigh.. sorry to hear that. What is it with these phones that you have to format them all the time? (a rhetoric question, knowledgeable presons needn't answer )
(Trivia: search results for 'hard reset': 6738, search results for 'format': 16063, search results for 'factory reset': 4329)
You'll probably soon have that same problem again - my all means I don't hope you will, but I'm just guessing
kvirtanen.deviantart.com

Satellite L305D-S5895 - Functions keys and WLan don't work with Win XP

Hi,
first sorry for my english
I bought a Toshiba Satellite l305d s5895, with winXP, because I need software, but the function keys doesn't works.
So I need a driver, but i can't find it, and the internet wireless doesn't work.

>Where would one find this special XP BIOS?
In my opinion there is problem because most threads here are about European notebook models. so then come question from US. Toshiba Europe and Toshiba US don't work together and every of them is responsible for own models and offer support for country specific notebook models.
So here in Europe Toshiba has for most models offered two BIOSes. One was already on the Vista delivered notebooks. On download page Toshiba has offered BIOS for WXP. in most cases it was version 5.xx and this BIOS was designed to support Toshiba specific tools and utilities. For example, full FN keys functionality was available with this WXP BIOS only.
So if someone of you have US notebook model they should see how to find the solution with Toshiba US or US forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1
Bye and good luck!

Next and Previous don't work with video in Playlists

In iTunes for Windows 10.1.2.17, when playing video from a playlist, the video will end and the video window will close, and playback stops. No new video will play. The same thing occurs when clicking on the Next or Previous buttons (both on the video window and in the playback controls at the top of iTunes. Shouldn't the next video in the playlist (or the next random video) play once the first has completed?
This is a new behavior. It did not occur with earlier versions of iTunes.
The Next and Previous buttons work as they are supposed to when playing video from the library, but then there is no way to select specific videos or to randomize playback as is possible under a playlist (which is the whole point of the playlist.)
The Next and Previous buttons still work as they are supposed to when playing music from a playlist. This new odd behavior occurs only with video playback.
Is this a known issue, or is there something I'm missing in the operation of iTunes? Are other people experiencing this behavior?
Message was edited by: BTarver

This happened to me as well with Windows 7 32 bit (which I did as as upgrade from Vista Home Premium - if that might foul things up a bit) and affects Firefox 34.1 and IE. I did a system restore which took me back to Firefox 33 and Flash was fine. Later in the day Firefox updated back to 34.1 and I lost Flash again.

Why Safari and QuickTime don't work with OS 10.3.9

I have an old Mac G4 running OS 10.3.9. Safari 1.3.2 does not work properly. Moreover QuickTime does not work at all. I cannot watch the movies on my website. I know my site is OK because everything works with a newer computer. What can I do to improve the situation? Any help will be greatly appreciated.

Click Software Update from your Apple menu. Make sure your software is up to date.
Moreover QuickTime does not work at all. I cannot watch the movies on my website. I know my site is OK because everything works with a newer computer.
The older Safari / QT versions may not be able to stream the video.

IPhoto, iDVD, and iMovie don't work with Leopard

Hi, I just installed Leopard onto my machine and iPhoto, iDVD and iMovie no longer work properly. For all three I get the error message "(This program) has unexpectedly quit." Can you help?

my husband was having the same problem and it even bled into his sys prefs. the problems actually started after he ran software update last night (things were working find before that, and he's running leopard btw)
he archived and reinstalled (he unchecked the "preserve users and settings box") and we're about to find out if that solved it.
to summarize, you may need to reinstall if software update doesn't fix it. not sure what caused this problem. perhaps some corruption of files?

Adobe Bridge permission issues when working with network account

We have some users using Adobe Bridge CS3, CS4 and CS5.
They are using Bridge to browse arround the file server.
I have ACL's so the users can have full access using the Finder, deleting, making folders etc.
Users are logged in to their AD account with their home folder synced to a Mac OS X server 10.6.4.
Unless they are Posix owner of a folder they can't make changes or nothing using Bridge.
If they log in to a local account on a Mac and then manually connect to a share on the same server all is fine with Bridge. They can make folders, delete files etc etc.
Any ideas?
I know Adobe made it easy for themselfs years ago by simply stating it is not supported to work on a server using any Adobe app.

jhellstrom wrote:
We have some users using Adobe Bridge CS3, CS4 and CS5.
They are using Bridge to browse arround the file server.
I have ACL's so the users can have full access using the Finder, deleting, making folders etc.
Users are logged in to their AD account with their home folder synced to a Mac OS X server 10.6.4.
Unless they are Posix owner of a folder they can't make changes or nothing using Bridge.
If they log in to a local account on a Mac and then manually connect to a share on the same server all is fine with Bridge. They can make folders, delete files etc etc.
Any ideas?
I know Adobe made it easy for themselfs years ago by simply stating it is not supported to work on a server using any Adobe app.
As you said Adobe washed their hands of the matter and as any business customer is almost certainly going to use a server, and as Adobe products are so expensive pretty much only business customers can afford them, this is totally inexcusable.
I had a similar network login related problem with Acrobat Pro in version 7.0 which after +two years+ (no exaggeration) was eventually fixed in Acrobat Pro 8.1. Unfortunately it was then broken again in Acrobat Pro 9.0. Based on my experiences with Acrobat Pro and due to a totally different reason (nothing to to do with using Adobe SW) I found that when I switched from using AFP for network home directories to instead using NFS, my problems with Adobe software and network login accounts went away.
So, it might be worth your thinking about switching to using NFS for home directories as a workaround.
Adobe have become even worse than Microsoft for their software. They use a variety of sucky installers instead of Apple's free Installer (Microsoft have switched to using Apple's Installer), they use product activation, they are even worse than MS Office at working with servers. The only redeeming fact Adobe has is that their Mac and Windows products are mostly equivalent unlike Microsoft who still cripple their Mac software.

Does fusion drive work with network accounts

Hi,
We are planning to buy new desktop systems.
Since we work with big files, we love the idea about Fusion drive.
Now my only question. Does this help when you use Network drives.
Since the files are not stored on the system, but on the network, I think its better to have a server with fusion in it?
An other solution might be using a mobile account on the desktop servers.
Since (a copy of) all files is stored on the computer I think the speed will be approved if we use files wit fusion drive.
Hope somebody can give his opinion with should be the best solution.
Now working on the systems is very slow, and often a "turning ball" system is there, when we are accessing files.
Regards,
Flip

Hi Uptime Jeff,
I 100% agree with your comment.
I would love to stop using network drives. It is slow, and I have often problems if the network is having issues.
There is only 1 reason why we use network drives and that is because we work on iMacs in office, and use Macbooks abrought. Since we can use the same homedrive (especially the /library/ folder with settings, passwords etc) on iMac and Macbook we make use of network drives.
Is there an other way to do this, then we can stop the full network drive.

A/V and Conferencing don't work with federated partners

Hi Guys.
I hope someone can assist us.
We have Lync Server 2013 installed and have a unusual error.
This is what they have:
Internet -> Firewall -> TMG 2010 -> Lync Edge -> Front End
The Edge Server & Front End server is Windows 2012 Standard Edition.
So we are planning on moving the Edge server to the DMZ soon.
As for Lync functionality this is currently working (Note that the client did not opt for Enterprise voice.)
IM: An AD authenticated user on Lync client ßinternal network à An AD authenticated user on Lync client [works 100%]
IM: An AD authenticated user on Lync client ßexternal network à An AD authenticated user on Lync client [works 100%]
IM: An AD authenticated user on Lync client ßexternal network à A Federated partner user on Lync client [works 100%]
A/V: An AD authenticated user on Lync client ßinternal network à An AD authenticated user on Lync client [works 100%]
A/V: An AD authenticated user on Lync client ßexternal network à An AD authenticated user on Lync client [works 100%]
A/V: An AD authenticated user on Lync client ßexternal network à A Federated partner user on Lync client [does not work at all]
Desktop & Application Sharing: An AD authenticated user on Lync client ß internal network à An AD authenticated user on Lync client [works 100%]
Desktop & Application Sharing: An AD authenticated user on Lync client ß external network à An AD authenticated user on Lync client [works 100%]
Desktop & Application Sharing: An AD authenticated user on Lync client ß external network à A Federated partner user on Lync client [does not work at all]
What could cause this?
Both users AD and Federated user do have permission on their own Lync policies to use these functions.
The error that we get from the federated partner logs is as follows.
ms-client-diagnostics 26 reason a federated call failed to establish due to a media connectivity failure where one endpoint is internal and the other is remote.
Any Ideas???
If you think your to small to make a differnce, try going to bed with a mosquito in the room...

Hi Gerrit Deike,
Based on my experience, you should check your TMG and Firewall settings and verify the required ports are opened, the required access rules are configured correctly.
Also please check the ports of Edge Server that you defined in the topology.
The required port and protocol for your reference.
http://technet.microsoft.com/en-us/library/gg425891.aspx
Best regards,
Eric

Hello World and FSBL don't work with ZC702

Hi everyone,
I'm very confused about my issue. I've a ZC702 Board and use SDK 2014.4 and Vivado 2014.4 (both 64 bit) on a Windows 7 machine.
I've created a simple design with Vivado. The only element I have is a Zynq processor. I turned on some controller ( like I2C, QSPI, CAN, SD) and, configured the CAN CLK prescaler (see Zynq-7000 AP SoC Technical Reference Manual v1.10, page 581) and that's it.
After I exported the bitstream and launched the SDK, I created a FSBL project and a Hello World project. Nothing spectacular, nothing weird. Everything I used came out of the box.
I used the Xilinx tools to create a boot image and flashed the memory.
The boot sequence works fine till it has to execute the HelloWorld.elf. I get following message :
Application
Handoff Address: 0x00000000
In FsblHookBeforeHandoff function
No Execution Address JTAG handoff
Here is the thing: If I use the ZC702 pre-defined hard platform, with I can choose in the creation process of a new project, everything works fine. But that's not, what I want and that's not, what I need.
Why does this happen and how can I understand and reconstruct this behavior to configure and fix this kind of problems
in future by myself?
I'm looking forward to your suggestions
P.S: I've done a lot of googling but I couldn't find anything suitable.

Check this AR and attached design
http://www.xilinx.com/support/answers/50869.html

Icloud Calendar and icloud Contacts quit working with my Outlook

Everything was working properly until this last week, then it just stopped. I have an idea it may be related to ios6, but I don't know. Trying to re-install iCloud control Panel on my PC was successful, but did not produce results. anybody have any ideas?

I solved it myself!
Found that in "info" on the ipod sync page, "Sync Contacts....", "Sync Calendars..." and "Sync mail accounts...." had become unticked

Datagrid and tooltip don't work with Flex 3 framework RSL

I have an application previously written in Flex 2.0.1. I've
recompiled it under Flex 3, and fixed any breaking changes, but I
now want to extract the framework as an RSL. I've tried 3.0.477 and
3.3 to no avail.
Problem is: when I compile the app with the framework "Merged
into Code", it works perfectly, looks beautiful.
When I compile it with the framework as an RSL, numerous
things go wrong:
- all Tooltips stop working, appearing as little empty
circles.
- Datagrids start behaving crazily - the headers won't appear
even with showHeaders=true and the headerText set for each column.
The columns all appear empty despite having valid data in the
dataprovider. I did manage to get one datagrid working by
specifying a custom ItemRenderer for each column, but a second
datagrid didn't work even with the itemrenderers.
I'm really at my wit's end with this. Anyone know why these
problems might be occurring?

This sounds like the same as http://forums.adobe.com/thread/922450

My Calendar and Contacts don't work with iOS5!?

I updated my Iphone 4 last night to the iOS5 and it went seamlessly. I thought everything was fine until I tried to edit one of my contacts. The little plus sign in the top right corner to add contacts or the edit option when viewing a contact have both disappeared I also found this to be the case in my calendar. I can edit events that are already saved, but cannot add any new ones because the plus symbol is gone. I haven't found anybody else with this issue so far, but its frustrating and I was wondering if anybody had any suggestions as to what I can do.

I found the solution. . . . Go to iCloud and turn it on for contacts. Merge the contacts and you should be able to edit, delete, and add contacts. Same thing if you can't edit your calendar. Turn it on in iCloud on your phone and you should be able to add or edit events.
Not sure I'm a fan of iCloud. . .

Z4: Word and OneDrive don't work with Multi-User

Hi,We are sharing the Z4 tablet among 4 in my family. For this I'm using the Android multiple users.The pre-installed MS Word worked for the main user or owner perfectly. Then I tried to install it for the second and third and fourth user. In all cases after starting Word for these users the message came up "download of additional content required". When clicking on "download" the app crashes. Then recently an update of Word was delivered via Google Play. Now the same happens for the main user. Deinstalling for all four users and reinstalling from Google Play didn't solve the issue.For MS OneDrive the issue is: it works for the main user. For the other users the Playstore gives the error message: "another user on this devices installed an incompatible version of OneDrive. Deinstall this first". Deinstalling and reinstalling didn't helped that issue either. Only one of the four users can use OneDrive. Any ideas on how to solve this? I do have the BKB50 and Word was my main reason to go for that combination with the Z4.Regards,Zampano

Microsoft Office for Android email support replied only with a standardized email. Beside of pointing to some FAQ it just offers to call the support hotline. I'll have to wait for the office hours then. In the meantime: has anyone tried using Word in a Multi-User setup on the Z4? Maybe it's just an issue here at me...Thx and Best Regards Zampano

IWork and iCloud don't work with network account

Similar Messages

Maybe you are looking for