IWork for iOS install in Mac pro

Hi,
I used to have only ipad and iphone which i have the iWork: Keytone, Page and Numners installed. I recently bought a Mac Pro, can I install this Apps to my Mac or I have to buy another iWork just for my Mac Pro, notebook?
Thanks in Advance.
BR,
Jade

The iWork apps for OS X are a separate purchase for a separate operating system.

Similar Messages

  • I have just purchased a MacBook Pro and iWork's. when I try to upload documents using iCloud, it now wants me to purchase iWorks for iOS ? Do I need to purchase both versions?

    I have just purchased a MacBook Pro and iWork's. When I try to upload documents using iCloud, it now wants me to purchase iWorks for iOS ? Do I need to purchase both versions?

    To be able to use documents at iCloud.com, you need at least one iOS device that uses the same account with at least one of the iWork apps installed.

  • Iwork for iOS on mac?

    if i am eligible and download iwork for ios on app store for free with a new iphone purchase
    do i get the equivalent iwork for mac also free?

    No they are two different  apps for two different operating systems.

  • DVD/Lightscribe drive for new (late 2010 Mac Pro?

    Does anyone know a source for an internal DVD w/ Lightscribe drive for a late 2010 Mac Pro? I want to install it in the second drive bay. I got one from OWC, but the depth of the DVD drawer was about twice that of the original drive that came with the Mac Pro. It would have been able to fit through the drop cover on the front of the Pro, but would not clear the internal rack components. It fit in the rack nicely with the 4 screws lining up properly, but would then not open more than about an eighth of an inch before hitting the internal rack frame, causing it to close. Thanks.

    Bummer! The instructions included with the drive did not mention thi. When I called OWC customer service she said that sometimes you had to remove the bezel from the Mac. I told her the Pro had no bezel. She said that the drive info did not specifically say it would fit a 2010 Pro a d gave me a RMA.'nmh bad for not questioning further. Thanks.

  • Improvements for IWork  for iOS

    I write to suggest improving your IWork  for ios application.
    The applications are very good, but lacks some important features that would help iPad -Iphone users to work better.
    These absences are: 
    NUMBERS:
    - filters 
    - sort by more criteria 
    - categories
    - better use when a keyboard is attached in the iphone or iPad, it is no neccesary that the virtual keyboard appears all the time, please, let the user choose if he considers it is neccesary
    - Landscape view in iphone
    - Support for more functions
    - Capacity to open bigger spreadsheets
    I suggest to checo out the Polaris Office application, this one has some functions that are lacking in Numbers.
    PAGES:
    Please, a better way to insert: page jump, tab, etc. Maybe a button in the Toolbar.
    IWORK FOR IPHONE: Besides the requirements listed above: a undo-redo button, because, it is very unconfortable to the user, shake his iphone when he has to undo or redo a lot of actions.
    Thanks And
    Best regards

    https://discussions.apple.com/thread/4225179?tstart=0

  • Game does not start after installing on mac pro

    Game does not start after new install on mac pro ?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Sound/audio is off for news/video clips Mac Pro , ML

    sound/audio is off for news/video clips Mac Pro , ML

    >certain clips
    What ARE those clips?
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Report back with the codec details of your file, use the programs below
    For Mac http://mediainfo.massanti.com/
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project

  • How to extend the time line for the premiere on mac pro mavericks

    how to extend the time line for the premiere on mac pro mavericks

    Wrong place.
    Try the Adobe Premiere forum.
    http://forums.adobe.com/community/premiere
    Good luck,
    x

  • Which Hardrdrive should I install in Mac Pro, 13", Late 2011, 2.8Ghz i7 4RAM 750H

    Please could you tell me Which Hardrdrive should I install in Mac Pro, 13", Late 2011, 2.8Ghz i7 4RAM 750H
    Tx

    Any 2.5" diam formfactor SATA HDD or SSD will be compatible.  As a start, look at the representative sample available from OWC:
    eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    It is very easy to do the installation yourself and it will be a lot less expensive.
    Ciao.

  • IWork for iOS 6

    Can I get iWork for iOS 6 anywhere? I would not like to update to iOS 7 on my iPAD 2, which the versions on the App Store require.

    I have the older (iOS 6) versions of the iWork Suite archived on my PC and they run just fine on my iOS 6.1.3 iPad 3rd Gen and iPad 4th Gen units. I believe if you own the iWork suite and have an iOS 6 device, you will still have access to those older versions via the App Store. Of course the iOS 7 versions will NOT run on iOS 6 devices but I believe you will be offered to download the newest version(s) that support your iOS 6 device.

  • Does anyone know if iWork for iOS can be used on both iPhone 4S and iPad 2? If I bought Pages, say, could I use it on both devices? Thanks

    Does anyone know if iWork for iOS can be used on both iPhone 4S and iPad 2? If I bought Pages, say, could I use it on both devices? Thanks

    It is the same version. So the iWork package will work on both, but Siri will only work on the iPhone 4S. So you could dictate on that, and use iCloud to finish the document on your iPad (assuming you have both). Cheers

  • IWork for iOS not syncing via iCloud

    Our new iMac came with the “free” iWork for OSX apps, so I decided to give iCloud syncing between OSX and IOS devices another try.
    I went to iCloud.com and created a simple document in Pages, Numbers and Keynote. I then checked to see if these three documents “showed up” on our iMac, MBP, iPhone 5s and iPad mini. Syncing the three iWork documents worked fine on the iMac and MBP. But the syncing results to iWork iOS apps on our iPhone and iPad were pretty abysmal. In both cases only ONE (out of three) of the iWork apps synced: Keynote on the iPad and Pages on the iPhone.
    Since at least one of the documents synced correctly on each of the iOS devices, I obviously have the right iCloud account info., etc. And I assure you that all three apps had/have their little green switches/sliders set to “on" in the Settings>iCloud>Documents and Data. Two days should be enough time to sync even on a slow internet connection. Syncing iWork for IOS documents was working before I turned off iCloud>Documents and Data syncing several months ago because I didn’t have iWork for OSX at the time and had no need to sync iWork documents between the iPhone and iPad.
    So what gives? Interestingly the two iWork for iOS apps that synced correctly, were the only apps that asked to use iCloud when they launched. And these were the only two apps that had not been launched since their last update. Could it be that iWork for IOS apps don’t pay attention to changes in the iCloud Documents and Data sync settings if syncing has been previously turned off?
    —GetRealBro

    Numbers and Pages are not syncing with iCloud on my iPhone or iPad, except for one occurrence in five days. Changed documents sit there with an arrow icon.
    Hardware is iPhone 5S running iOS 7.1.2 and iPad Air running 7.1.2
    Latest update of Numbers and Pages. I deleted and reinstalled Numbers on the iPad without any change however this did seem to bring the esisting documents down to the device from iCloud.
    I have an internet connection. I have tried turning 4G on and off, setting up a hotspot on either device so that the other has a wireless connection but this has not fixed the problem.
    I have tried restarting both devices.
    i have tried turning Use iCloud off but this only worked once.
    Data roaming is on and cellular data is on on both devices.
    Settings/iCloud/Documents & Data/Numbers is turned on and Settings/iCloud/Documents & Data/Pages is turned on on both devices.
    Settings/Numbers/Use iCloud is on and Settings/Pages/Use iCloud is on on both devices.
    Looking at Settings/iCloud/Manage Storage/Numbers shows there are documents.
    i am currently travelling, hence the 3G/4G. At home, on my wireless network (based on an ADSL connection) it will often sync sporadically enough that it is not much of an issue, just an irritation. However this total lack of syncing over the past five days is getting to be pretty unamusing.

  • I need an "Open CL compatible graphics card for an early 2008 Mac Pro with 1 gig of V-Ram", any recommendations? Thanks.

    I need an "Open CL compatible graphics card for an early 2008 Mac Pro with 1 gig of V-Ram", any recommendations?
    Thanks.

    BlackList:
    Final Cut Pro X, Motion 5, Compressor 4: Graphics card compatibility
    WhiteList:
    Final Cut Pro X, Motion 5, Compressor 4: Using OpenCL-enabled graphics cards
    OpenCL graphics cards available now, for any Mac Pro model, for a reasonable cost:
    Apple 5770 US$250 Avail: in stock
    Apple 5870 US$450 Avail: 2-3 weeks

  • Capture willl not work with FCP 5.1.1 installed on Mac Pro 2.66.

    I need some help, Please!
    Hello, I have just installed my crossover copy of Final Cut Studio 5.1 in a new Mac Pro.
    The only problem that I have encountered is with capture. After running for
    several seconds capture stops and the spinning beach ball makes its entrance.
    After several minutes of spinning the capture moves on for a few more
    frames. Again the beach ball will spin for several more minutes. This continues until I click on
    STOP at which point the spinning beach ball takes over the machine and will
    not give me back control until I turn off my transport/deck. I have reinstalled
    only FCP 5.1(not the other apps. from FCS) with no luck. I didn't uninstall the previous copy. No improvement.
    All my settings are the same as recommended in Easy Set Up.
    The tape and deck work fine on a similar machine with similar software.
    I have also found a similar problem with the installed copy of iMovie.
    This software was used on a G5 before moving it over to Mac Pro with out
    problems. I am at a complete loss. I hope you can embarrass me with a
    simple solution.
    Thank you for your help.

    avidvid, thank you for you advice. I did check the system profiler and the device is
    recognized, but to no avail. In fact it is getting worse. When I initiate log and
    capture I can hear the transport working. It is moving all the time even though
    the capture window is now only showing the color bars. The "beach ball" is now
    constantly whirling and will only stop when the "deck" is turned of at the source.
    I am worried that I have messed up the reinstall. I am really not sure how much
    "stuff" I must remove from the system, or whether to reinstall the entire suite.
    Thanks again for your trouble.

  • Here is a 2 for one, On a Mac Pro 5,1 2.66ghz 6 core Xeon.

    My mac pro is developing some strangeness, now when I go to start up the machine in morning it doesnt turn on until I have hit the power button 3 times, sometimes even this doesnt do the trick so I unplug it wait a couple sec and plug back in. So far its always actually started and I am happy for that as I am busy on 2 jobs right now and cannot afford this. Any ideas on what could be happening? This behaviour started probably 2 weeks ago. I have apple care and machine is only about 7 months old...
    Second part I recently purchased a memory upgrade kit from Ramjet taking th e system from 12 to 24 gigs, the ram are 6 matched pairs of 4gb and according to the info I have found should be exactly what is needed. 1033mhz ddr3, anyway I istalled it last week during a short lull. after a week I have removed it and replaced my original 12 gigs as the computer was behaving very slowly and when I checked the  activity monitor the drive was doing crazy read write activity like i was rendering something or moving big geometry in 3D. This is with nothing but AM skype and safari running. anyway it gets better when I re install my oem ram the computer kept telling me 3 times in a row that I had not put the ram in correctly so I just moved teh chips around until it was happy.
    Now when I check activity monitor with original ram I am back to disc activity around 1.4 gig read and 670mb write while its just sitting as oposed to 20+ gb with the ramjet memory.
    It seems to be runnning fine now but I am really concerned that there is something fundamentally wrong with this machine now.
    Any thoughts or assist greatly appreciated.

    Ask Ramjet to take them back, test, and send a new set to test.
    When you get new RAM, I actually recommend a quick test with Apple Hardware test at the least. There are also some memory test and performance uttilities worth running. Some run Geekbench (has memory bandwidth) as well as PRIME for OS X.
    But you should  contact  Ramjet. Maybe have them take it back and get Crucial or Kingston (they really do make a difference).
    Watch your system more closely, monitor temps as well as use AM.
    Maybe your power cord is bad or the wall outlet, or if using a UPS maybe that is not adequate (900W unit?).

Maybe you are looking for