IWork won't load iCloud documents on iOS 6 after update

Pages, Numbers and Keynote won't load iCloud documents. I manually turn on the feature to use iCloud, but it immediately automatically turns off after I load any of the iWork apps on my iPhone. Apple, please fix asap!

Also struggled for a long time. iCloud documents between Iphone and Macbook were syncing, but not with iPad. The following seems to have sorted out the problem (did it only on iPad):
Settings - General - Reset - Reset All Settings
After doing this, all my iCloud documents appeared in:
Settings - iCloud - Storage and Backup - Manage Storage - Pages.
All devices are now syncing
Hope this helps

Similar Messages

I can't pass the icloud terms and conditions page after updating ios7

Hi, I need urgent help!
I can't pass the icloud terms and conditions page after updating ios7
I've tried agree disagree and every other button i could press but it just wouldn't go pass the page
Is there anyone who can help me with it?

There are several solutions you can try in this discussion: https://discussions.apple.com/thread/5321627?start=0&tstart=0.

I can't find how to access/import my iCloud documents in iOS iWorks?

According to the iCloud settings on my Mac, all Documents from Pages, Keynote and Numbers are automatically saved to iCloud.
Everything is iCloud enabled in Settings on both my Mac and iPad (iPad Air, iOS 7.1.1) and Documents and Data is turned on etc.
However, when I open my iWorks (Pages, Keynote or Numbers) apps on my iPad, there seems to be no option to import or open files from iCloud?
This is very frustrating, so if someone could help that would be great.

Hello annac42
They should show up in the document manger when opening up any of the iWork apps for iOS. If they do not, then check out the article below for some troubleshooting steps to go over including resetting iCloud Documents & Data service.
iCloud: Troubleshooting Documents in the Cloud
http://support.apple.com/kb/TS3991
Regards,
-Norm G.

Safari won't load webpages until about 10 seconds after initial launch

This problem started happening to me after I upgraded to 10.6 and has remained after 10.6.1 update, using Safari 4.
Basically, when I first load up Safari the home page (Google) is taking about 10 to 20 seconds to load up. I'm stuck with a white screen, with the banner bar informing me that it's loading but nothing comes up for 10 to 20 seconds. During this period if I click on any other of my links they won't load either. After 10 to 20 seconds is over i can load any page instantly, with no more problems occurring at all.
If I close all Safari windows and then open up another it all runs fine still. However, if I quit Safari all together, and then reopen it, I am faced with the same 10 to 20 second wait to load any webpages again. I really don't know what it could be. It's not my internet, I have a quick connection, it happens at home and at work on my MBP, and both through wireless or ethernet connections.
I tried entering a manual DNS server upon seeing this written in some other forums but I don't even know if this would help my problem, and it certainly hasn't worked for me. All seems a bit strange and I never had this problem using Leopard.

Hi,
Mac OS: Long Delay Before Web Pages Start to Load, Then Load Suddenly at Normal Speed
*I tried entering a manual DNS*
If you have not tried Open DNS, go here. Open DNS
Just click the computer icon and follow the instructions.
Empty the Cache. To empty the cache memory go to the Safari menu and click 'Empty Cache
Reset Safari go to the Safari menu and click 'Reset Safari.. select the first 5 buttons and click Reset.
To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/Icons and delete its contents.
Carolyn
Message was edited by: Carolyn Samit

IOS 6.1.3 photo won't sync(from iTunes iPad/iPhone) to after update

After update both my iPad and iPhone to 6.1.3 a few days ago, I just found that both devices doesn't have anything in the Photos app! I have a lot of product sample pictures in a few albums, but just can't get them sync to the device anymore! When the sycn started, I can see the albums got created on the device, and the number of pictures need to be sync... it display "Syncing 0 of 1391", after maybe 1 minute, it stopped, nothing get sync.
I only select the albums I want in iTunes to sync, no event selected... that work perfectly fine before until this update.
No difference if wire or wifi.
My wife's iphone got different issue. She sync to her own iMac, when select a few events, all pictures all sync to the phone, but no events created! so all photos all show up in the "Photos", but nothing in "Events".
Just found that if I select 1 event, I can sync 1 album... but when I try the second time, it didn't work again!. After a lot of combinations of "events" and "albums" selections and many syncs, I finally got the pictures I want to my devices... by the behaviors are very unpredicatable, something definiatelly broken here!
Anybody see similare issues?

YES! Updated to 6.1.3 and can't sync at all. Either by cable, bluetooth, or wifi. My mac won't recognize my iphone at all. Doesn't even show up in finder. Can't sync anything from iTunes as iTunes won't recognize my iPhone either.

Some Pogo games won't load. EA Games suggested Lion Java update but it didn't help.

After updating my 10.6 OS to Lion, I cannot open many of the Pogo games I previously played. EA games ( in Pogo help ) suggested using apple's Java update for Lion. Installing the update did not correct the problem. Is there anything else I can do to get pinochle, canasta and other games in Pogo to load?

I have the same problem with connection reset. For awhile I couldn't even bring up pogo home page. I thought it was the ad blocker, but after allowing pogo site on ad blocker, the problem continues. I too am really frustrated with this; everything was fine until I updated Firefox. My solution was to download Google Chrome. Pogo works just fine on that. I still want my Firefox back! Any solutions out there?

I can no longer load certain games on face book after updating to 4.0.1

after updating to 4.0.1 I can no longer load the game farmville or frontierville on facebook. i first tried to send a feed back and it indicated that I had the wrong version. I went through reseting the useragent as per your instructions but not all of your useragents you indicated were listed. I then tried again to send a feedback this time it went through but after entering my comments it would not send them. So do I uninstall firefox and start over? If I do what happens to my bookmarks?

It went a little farther this time after disabling AVG. The problem still exists it will not continue loading the app. It just goes dead there is no traffic on the sat modem, also it does not show any friends when I try to send gifts. All of this worked with the previous version of FireFox. I tried it with Google Chrome and everything worked just fine.
Thanks for the input - any other ideas?

IOS problem after updating to 8.2

Since installing the recent IOS update 8.2 I the lower bar in the Safari screen disappears and/or is not functioning. Thus I cannot change or refresh pages and/or apps.... Anyone any idea what is going wrong here?
Thanks in advance
Regards from sunny Amsterdam

Hi ..
Follow Apple's instructions for recovery mode here > iOS: Unable to update or restore
You can restore from a backup.

Why can't down load apps or go onto Facebook after updating it keeps sayin I need ios5

Why can't I down load apps or get on to Facebook after updating my phone

Why can't I down load apps or get on to Facebook after updating my phone

When i run the icloud control panel 3.1 , the error is repair , this still won't load icloud

How do I repair 3.1 on windows 8 and Outlook

Restart the PC. Go into your "Uninstall a program" control panel, select "iCloud control panel" and click "Repair"
Can you launch the iCloud control panel now?

HT5927 Using apple configurator with supervised devises, enabling iCloud/ find my iOS device (after being supervised), backing up that supervised / find my iPhone enabled image, --issue; unable to apply back up to any iOS device (including the orign. devi

Senario:
Need to manage 500 Enterprise iPads
Requirements;
1) Trackable via Find my iOS device (we have 500 iPads and with the 100 device limit per iCloud account for Find my iOS device limit we have 5+ iCloud accounts).
2) Individually named iPads for locating and sending commands to wipe, lost mode, etc.. on map per Find my iOS device (we uniquely name them in Apple Configurator either by using the "sequensetially numbering feature", or by creating individual back ups (yes, 450) with the name specified in the image).
3) Find my iOS device feature enabled in base Prepared or Supervised image (using one of our 5+ iCloud accounts) (image can be created during prepared stage, or in supervised stage) - tried both and have the same issue - which I am getting to...
4) VPP codes for paid apps (all VPP codes purchased with generic account which is the Apple Admin account for VPP purchases). Apple Configurator is set up under a different/ unique Apple account (i.e. not VPP admin account) and not logged into iTunes for any purchases/ services).
Issue: Can not do any following senarios;
A)
1) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Prepare stage (added during preparing stage)
2) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Supervised stage (added after supervising, and then backing up that supervised and iOS Find my iOS device enabled)
B) 1) Apply master image to any Supervised iPad (under senario step A) or senario step B)), including the (Supervised or/ Prepared iPad that was used to create the maset iOS 7 image
Result = fail with Apple generic code "4" ; This is obviously due to Find my iOS device feature enabled during image capture.
According to Apple (see Apple Config. Help) the 'Activation lock' (new feature in iOS 7) will not be enabled on a supervised device when an iCloud account with "Find my iDevice" is enabled. Their "help files" seem to imply after the device is Supervised, and a person (presumably and end user) adds thier own iCloud account with Find my iOS device enabled the activation lock is not enabled and erasing/ reconfiguring with Apple Configurator will not cause reimaging probhlems such as requiring the end user's credentials to reconfigure the device using Apple Configurator (i.e. you won't need the end user's credentials).
Needed: To be able to configure Supervised iPads with iCloud account (Enterprised owned iCloud account) configured on the basse image, which has Find my iOS device enabled, and to be able to apply that base image to all Enterprise iPads without generic apple error code 4 issue.

Hi all
I am trying to replicate these steps in my environment but I am having trouble getting an iCloud backup restored to a supervised device. Can someone clarify the steps? The parts I am unsure on are:
1) Do you Prepare in Configurator with all the institution owned apps? Or do you install them after restoring the iCloud backup?
2) After entering the personal AppleID to restore the iCloud backup, the setup wizard prompts for the Institution/Configurator AppleID, there is an option to 'Skip Now'. Do you enter in the password for the institution account? or do you skip that step?
3) What exactly is on the screen in the 'mini setup assistant' after the restore when you Refresh with Configurator?
Any help would be greatly appreciated!

Unable to load itunes store on iphone 4S after updating to ios 7

After I updated my iphone 4S to ios 7, I am unable to load the itunes store on my phone. It spins like it is loading and then stops, but the screen is blank. Does anyone know what might cause this?

Are you talking about the Search screen? If so, it has been hung up for the last 24 hours....undoubtedly server related. I do not have IOS 7 yet, but it is doing the same thing on my iPhone....
I'm waiting until the weekend to try it again. No point in getting crazy over it.
Cheers,
GB

Push notifications and iMessage won't work on iPod 4th gen refurbished after updating to last ear iOS

My iPod has been working well for a while other than the battery draining very quickly. But just today I updated to iOS 6.1.3 and all of a sudden iMessage won't deliver the messages and my push notifications aren't showing up! I don't know what is making this happen, but this along with the battery issue is driving me crazy!!! Any help would be greatly appreciated!!

Try turning off the following to conserve battery:
Settings>Mail, Contacts, Calendars>Push>OFF
Settings>Notifications>Mail>Gmail>Notification Center>OFF
Settings>Mail, Contacts, Calendars>Fetch New Data>Off

Safari won't load Java applet? (latest Java 7 update 51)

Hello,
I am trying to use the following website:
http://kidsnvue.com
It is a portal that allows me to watch my child at daycare over the internet with a password. The trouble is that the video works with Java 7.
So every since I downloaded Java 7 update 51 (the latest update) then no matter how I configure my security settings I get the message "Application Blocked. Your security settings have blocked an untrusted application from running".
Even if I go into the security settings and try every different option like "Run in Unsafe Mode". I still get blocked from running this website.... This wasn't a problem with the previous versions of Java 7...
However Mavericks won't even let me run a previous version of Java. When I try to do that I get the message that my Java is not up to date and it tells me to update it before loading anything in Java...
Any advice on how I can get this website to run in Safari (or even in another browser)?
Thanks!

Hi Richie
the logs are pretty specific about what's happened...
Symbol not found: _ZNK3KJS9ObjectImp11hasPropertyEPNS9ExecStateEj
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/JavaScriptCor e.framework/Versions/A/JavaScriptCore
which is a long-winded way of saying that Javascript core is missing or corrupted. Likely due to a software update failing part way through.
Do you have any other browsers available on the iBook? if so it might be possible to attempt running an OS update which would replace the file.
The 'official' line is an archive & install, but armed with a 3rd party app it is possible to extract the file from your install disks and replace it manually - of course this does involve some messing in the System folder, but isn't all that difficult in my opinion.
You probably can't copy the file from another mac, unless you have access to another one running 10.4
Let us know how you'd like to proceed - I'm happy to give detailed instructions on replacing the file; it's not an uncommon problem that you have. I've posted several times before on this, so I'll try to find an earlier thread - at least that will give you an idea of what's involved.
Andy

Applet won't load for a second since JRE 6 update 21

My applet loads the first time but not the second unless I turn off Caching in the Java Control Panel and delete the cache and temp internet files. The Exception is as follows :
java.lang.ArrayIndexOutOfBoundsException: 0
     at com.sun.deploy.security.CPCallbackHandler$ChildElement.<init>(Unknown Source)
     at com.sun.deploy.security.CPCallbackHandler$ChildCallback.openClassPathElement(Unknown Source)
     at com.sun.deploy.security.DeployURLClassPath$JarLoader.getJarFile(Unknown Source)
     at com.sun.deploy.security.DeployURLClassPath$JarLoader.access$800(Unknown Source)
     at com.sun.deploy.security.DeployURLClassPath$JarLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.deploy.security.DeployURLClassPath$JarLoader.ensureOpen(Unknown Source)
     at com.sun.deploy.security.DeployURLClassPath$JarLoader.<init>(Unknown Source)
     at com.sun.deploy.security.DeployURLClassPath$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.deploy.security.DeployURLClassPath.getLoader(Unknown Source)
     at com.sun.deploy.security.DeployURLClassPath.getLoader(Unknown Source)
     at com.sun.deploy.security.DeployURLClassPath.getResource(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader$2.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.plugin2.applet.Plugin2ClassLoader.findClassHelper(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception: java.lang.ArrayIndexOutOfBoundsException: 0
Any ideas what is happening?
Thanks Mark.

EJP wrote:
'this.document' is a predefined variable that defines the URL source of the current page. If you are referring to the predefined variable that provides access to the Document Object Model then I believe you are mistaken, that is 'window.document' or just 'document'.
EJP wrote:
Your name either conflicts with that or is getting confused with it somewhere.The 'document' variable is a parent of the window object e.g. 'window.document' but my variable has the context of 'this'. That means 'this.document.URL' returns 'undefined' instead of the URL for the current page.
JavaScript is also case sensitive so 'document.URL' is not the same as 'Document.URL', the last of which returns 'undefined'.
If Java relealy was confusing my variable with the predfined one then I would expect the same behaviour if I were to use differnt variations of the variable. However the follwoing JavaScript doesnt affect the Applet in anyway:
<script type="text/javascript" language="javascript">
    //this.Document = 'string'; // Remove this line to get it to work again
    this.document = 'string';
    document = 'string';
    Document = 'string';
</script>For some strange reason it only affects the Applet when 'this.Document' is used. Why would Java be affected in this way in the first instance? Even setting the 'scriptable' parameter to false doesn’t help:
<param name="scriptable" value="false">Are there any other settings I am not aware of that could maybe prevent Java from loooking at the JavaScript?
EJP wrote:
Use another name.As I mentioned in my original post this is not easily done, I can edit the source code on my own site but the code still remains unchanged on the Mootools JavaScript Framework website.
Thanks

IWork won't load iCloud documents on iOS 6 after update

Similar Messages

Maybe you are looking for